Jump to content

WebCam example


rysiora
 Share

Recommended Posts

$WM_CAP_START = 0x400
$WM_CAP_UNICODE_START = $WM_CAP_START +100 
$WM_CAP_PAL_SAVEA = $WM_CAP_START + 81 
$WM_CAP_PAL_SAVEW = $WM_CAP_UNICODE_START + 81 
$WM_CAP_UNICODE_END = $WM_CAP_PAL_SAVEW 
$WM_CAP_ABORT = $WM_CAP_START + 69 
$WM_CAP_DLG_VIDEOCOMPRESSION = $WM_CAP_START + 46 
$WM_CAP_DLG_VIDEODISPLAY = $WM_CAP_START + 43 
$WM_CAP_DLG_VIDEOFORMAT = $WM_CAP_START + 41 
$WM_CAP_DLG_VIDEOSOURCE = $WM_CAP_START + 42 
$WM_CAP_DRIVER_CONNECT = $WM_CAP_START + 10 
$WM_CAP_DRIVER_DISCONNECT = $WM_CAP_START + 11 
$WM_CAP_DRIVER_GET_CAPS = $WM_CAP_START + 14 
$WM_CAP_DRIVER_GET_NAMEA = $WM_CAP_START + 12 
$WM_CAP_DRIVER_GET_NAMEW = $WM_CAP_UNICODE_START + 12 
$WM_CAP_DRIVER_GET_VERSIONA = $WM_CAP_START + 13 
$WM_CAP_DRIVER_GET_VERSIONW = $WM_CAP_UNICODE_START + 13 
$WM_CAP_EDIT_COPY = $WM_CAP_START + 30 
$WM_CAP_END = $WM_CAP_UNICODE_END 
$WM_CAP_FILE_ALLOCATE = $WM_CAP_START + 22 
$WM_CAP_FILE_GET_CAPTURE_FILEA = $WM_CAP_START + 21 
$WM_CAP_FILE_GET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 21 
$WM_CAP_FILE_SAVEASA = $WM_CAP_START + 23 
$WM_CAP_FILE_SAVEASW = $WM_CAP_UNICODE_START + 23 
$WM_CAP_FILE_SAVEDIBA = $WM_CAP_START + 25 
$WM_CAP_FILE_SAVEDIBW = $WM_CAP_UNICODE_START + 25 
$WM_CAP_FILE_SET_CAPTURE_FILEA = $WM_CAP_START + 20 
$WM_CAP_FILE_SET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 20 
$WM_CAP_FILE_SET_INFOCHUNK = $WM_CAP_START + 24 
$WM_CAP_GET_AUDIOFORMAT = $WM_CAP_START + 36 
$WM_CAP_GET_CAPSTREAMPTR = $WM_CAP_START + 1 
$WM_CAP_GET_MCI_DEVICEA = $WM_CAP_START + 67 
$WM_CAP_GET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 67 
$WM_CAP_GET_SEQUENCE_SETUP = $WM_CAP_START + 65 
$WM_CAP_GET_STATUS = $WM_CAP_START + 54 
$WM_CAP_GET_USER_DATA = $WM_CAP_START + 8 
$WM_CAP_GET_VIDEOFORMAT = $WM_CAP_START + 44 
$WM_CAP_GRAB_FRAME = $WM_CAP_START + 60 
$WM_CAP_GRAB_FRAME_NOSTOP = $WM_CAP_START + 61 
$WM_CAP_PAL_AUTOCREATE = $WM_CAP_START + 83 
$WM_CAP_PAL_MANUALCREATE = $WM_CAP_START + 84 
$WM_CAP_PAL_OPENA = $WM_CAP_START + 80 
$WM_CAP_PAL_OPENW = $WM_CAP_UNICODE_START + 80 
$WM_CAP_PAL_PASTE = $WM_CAP_START + 82 
$WM_CAP_SEQUENCE = $WM_CAP_START + 62 
$WM_CAP_SEQUENCE_NOFILE = $WM_CAP_START + 63 
$WM_CAP_SET_AUDIOFORMAT = $WM_CAP_START + 35 
$WM_CAP_SET_CALLBACK_CAPCONTROL = $WM_CAP_START + 85 
$WM_CAP_SET_CALLBACK_ERRORA = $WM_CAP_START + 2 
$WM_CAP_SET_CALLBACK_ERRORW = $WM_CAP_UNICODE_START + 2 
$WM_CAP_SET_CALLBACK_FRAME = $WM_CAP_START + 5 
$WM_CAP_SET_CALLBACK_STATUSA = $WM_CAP_START + 3 
$WM_CAP_SET_CALLBACK_STATUSW = $WM_CAP_UNICODE_START + 3 
$WM_CAP_SET_CALLBACK_VIDEOSTREAM = $WM_CAP_START + 6 
$WM_CAP_SET_CALLBACK_WAVESTREAM = $WM_CAP_START + 7 
$WM_CAP_SET_CALLBACK_YIELD = $WM_CAP_START + 4 
$WM_CAP_SET_MCI_DEVICEA = $WM_CAP_START + 66 
$WM_CAP_SET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 66 
$WM_CAP_SET_OVERLAY = $WM_CAP_START + 51 
$WM_CAP_SET_PREVIEW = $WM_CAP_START + 50 
$WM_CAP_SET_PREVIEWRATE = $WM_CAP_START + 52 
$WM_CAP_SET_SCALE = $WM_CAP_START + 53 
$WM_CAP_SET_SCROLL = $WM_CAP_START + 55 
$WM_CAP_SET_SEQUENCE_SETUP = $WM_CAP_START + 64 
$WM_CAP_SET_USER_DATA = $WM_CAP_START + 9 
$WM_CAP_SET_VIDEOFORMAT = $WM_CAP_START + 45 
$WM_CAP_SINGLE_FRAME = $WM_CAP_START + 72 
$WM_CAP_SINGLE_FRAME_CLOSE = $WM_CAP_START + 71 
$WM_CAP_SINGLE_FRAME_OPEN = $WM_CAP_START + 70 
$WM_CAP_STOP = $WM_CAP_START + 68

#include <GUIConstants.au3>
$avi = DllOpen("avicap32.dll")
$user = DllOpen("user32.dll")
$snapfile = @ScriptDir & "\scrshot.bmp"

$Main = GUICreate("Camera",350,270)
$cap = DllCall($avi, "int", "capCreateCaptureWindow", "str", "cap", "int", BitOR($WS_CHILD,$WS_VISIBLE), "int", 15, "int", 15, "int", 320, "int", 240, "hwnd", $Main, "int", 1)

DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 0, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_SCALE, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_OVERLAY, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEW, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEWRATE, "int", 1, "int", 0)

GUISetState(@SW_SHOW)
HotKeySet("{INSERT}", "SnapShot"); Press 'Insert' to make a SnapShot !

While 1
    $msg = GUIGetMsg()
    If $msg = $GUI_EVENT_CLOSE Then
    ;DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_CALLBACK_FRAME, "int", 0, "int", 0)
        DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_END, "int", 0, "int", 0)
        DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_DISCONNECT, "int", 0, "int", 0)
    ;DllClose($avi)
        DllClose($user)
        Exit
    EndIf
    Sleep(1)
Wend

Func SnapShot()
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_GRAB_FRAME_NOSTOP, "int", 0, "int", 0)
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SAVEDIBA, "int", 0, "str", $snapfile)
EndFunc

Maybe someone would find it useful. Insert is the HotKey for making photos.

Edited by rysiora
Link to comment
Share on other sites

Interesting... Stick this into Valuater's PC LOCKOUT and there you go! You can actually take a pic of who was trying to break in!

My laptop has a embedded webcam, so i can make use of this.

#)

Edited by nfwu
Link to comment
Share on other sites

This is amazing! I've wondered how to do this for ages...

My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop.
Link to comment
Share on other sites

Only a black screen comes up using my WebCam ?

Are you sure you have drivers installed and your cam is working in other programs? Or maybe you have your cam connected with other computer and using it by network - if so I can't help you yet.

You can try to change

DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 1, "int", 0)

To 1,2 or other number if you have few devices/drivers of this type and your video driver is not the first one(index 0 is default).

Nice Script. But how i can record to a avi (or better mpg)??

Here is a sample of capturing to avi. It's not working perfectly, its very slow and sometimes stopping but it should work

;SIMPLY ADD THIS TO PREVIOUS SCRIPT FROM MY FIRST POST.


HotKeySet("{HOME}", "StartRecording"); Press 'Home' to start recording !

Func StartRecording()
    WinSetTitle($Main, "", "WebCam - Capturing...")
    HotKeySet("{HOME}", "StopRecording")
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SET_CAPTURE_FILEA, "int", 0, "str", $moviefile)
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SEQUENCE, "int", 0, "int", 0)
EndFunc

Func StopRecording()
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_STOP, "int", 0, "int", 0)
    WinSetTitle($Main, "", "WebCam - Ready")
    HotKeySet("{HOME}", "StartRecording")
EndFunc
Edited by rysiora
Link to comment
Share on other sites

Link to comment
Share on other sites

The video recording works nice but a bit slow.

My Programs:AInstall - Create a standalone installer for your programUnit Converter - Converts Length, Area, Volume, Weight, Temperature and Pressure to different unitsBinary Clock - Hours, minutes and seconds have 10 columns each to display timeAutoIt Editor - Code Editor with Syntax Highlighting.Laserix Editor & Player - Create, Edit and Play Laserix LevelsLyric Syncer - Create and use Synchronised Lyrics.Connect 4 - 2 Player Connect 4 Game (Local or Online!, Formatted Chat!!)MD5, SHA-1, SHA-256, Tiger and Whirlpool Hash Finder - Dictionary and Brute Force FindCool Text Client - Create Rendered ImageMy UDF's:GUI Enhance - Enhance your GUIs visually.IDEA File Encryption - Encrypt and decrypt files easily! File Rename - Rename files easilyRC4 Text Encryption - Encrypt text using the RC4 AlgorithmPrime Number - Check if a number is primeString Remove - remove lots of strings at onceProgress Bar - made easySound UDF - Play, Pause, Resume, Seek and Stop.
Link to comment
Share on other sites

OH MY GOD!!! I was looking for a program that can take snapshots and record video with my camera (it didn't include software/ or even say it can record video everything i found.. blatently sucked.. and TOO think this could be done with autoit is freaking incredible! it even records sound with the video , thanks for sharing rysiora!! :D

Link to comment
Share on other sites

@nfwu suggested to put in Valuaters lockout

Here is some code i writted press numpad 2 and it will take some pictures when a person push a button on the keyboard press 2 again and it will ask for a password that if it is correct will turn off the capturing of images

Please report if i made something wrong in this code

$WM_CAP_START = 0x400
$WM_CAP_UNICODE_START = $WM_CAP_START +100
$WM_CAP_PAL_SAVEA = $WM_CAP_START + 81
$WM_CAP_PAL_SAVEW = $WM_CAP_UNICODE_START + 81
$WM_CAP_UNICODE_END = $WM_CAP_PAL_SAVEW
$WM_CAP_ABORT = $WM_CAP_START + 69
$WM_CAP_DLG_VIDEOCOMPRESSION = $WM_CAP_START + 46
$WM_CAP_DLG_VIDEODISPLAY = $WM_CAP_START + 43
$WM_CAP_DLG_VIDEOFORMAT = $WM_CAP_START + 41
$WM_CAP_DLG_VIDEOSOURCE = $WM_CAP_START + 42
$WM_CAP_DRIVER_CONNECT = $WM_CAP_START + 10
$WM_CAP_DRIVER_DISCONNECT = $WM_CAP_START + 11
$WM_CAP_DRIVER_GET_CAPS = $WM_CAP_START + 14
$WM_CAP_DRIVER_GET_NAMEA = $WM_CAP_START + 12
$WM_CAP_DRIVER_GET_NAMEW = $WM_CAP_UNICODE_START + 12
$WM_CAP_DRIVER_GET_VERSIONA = $WM_CAP_START + 13
$WM_CAP_DRIVER_GET_VERSIONW = $WM_CAP_UNICODE_START + 13
$WM_CAP_EDIT_COPY = $WM_CAP_START + 30
$WM_CAP_END = $WM_CAP_UNICODE_END
$WM_CAP_FILE_ALLOCATE = $WM_CAP_START + 22
$WM_CAP_FILE_GET_CAPTURE_FILEA = $WM_CAP_START + 21
$WM_CAP_FILE_GET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 21
$WM_CAP_FILE_SAVEASA = $WM_CAP_START + 23
$WM_CAP_FILE_SAVEASW = $WM_CAP_UNICODE_START + 23
$WM_CAP_FILE_SAVEDIBA = $WM_CAP_START + 25
$WM_CAP_FILE_SAVEDIBW = $WM_CAP_UNICODE_START + 25
$WM_CAP_FILE_SET_CAPTURE_FILEA = $WM_CAP_START + 20
$WM_CAP_FILE_SET_CAPTURE_FILEW = $WM_CAP_UNICODE_START + 20
$WM_CAP_FILE_SET_INFOCHUNK = $WM_CAP_START + 24
$WM_CAP_GET_AUDIOFORMAT = $WM_CAP_START + 36
$WM_CAP_GET_CAPSTREAMPTR = $WM_CAP_START + 1
$WM_CAP_GET_MCI_DEVICEA = $WM_CAP_START + 67
$WM_CAP_GET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 67
$WM_CAP_GET_SEQUENCE_SETUP = $WM_CAP_START + 65
$WM_CAP_GET_STATUS = $WM_CAP_START + 54
$WM_CAP_GET_USER_DATA = $WM_CAP_START + 8
$WM_CAP_GET_VIDEOFORMAT = $WM_CAP_START + 44
$WM_CAP_GRAB_FRAME = $WM_CAP_START + 60
$WM_CAP_GRAB_FRAME_NOSTOP = $WM_CAP_START + 61
$WM_CAP_PAL_AUTOCREATE = $WM_CAP_START + 83
$WM_CAP_PAL_MANUALCREATE = $WM_CAP_START + 84
$WM_CAP_PAL_OPENA = $WM_CAP_START + 80
$WM_CAP_PAL_OPENW = $WM_CAP_UNICODE_START + 80
$WM_CAP_PAL_PASTE = $WM_CAP_START + 82
$WM_CAP_SEQUENCE = $WM_CAP_START + 62
$WM_CAP_SEQUENCE_NOFILE = $WM_CAP_START + 63
$WM_CAP_SET_AUDIOFORMAT = $WM_CAP_START + 35
$WM_CAP_SET_CALLBACK_CAPCONTROL = $WM_CAP_START + 85
$WM_CAP_SET_CALLBACK_ERRORA = $WM_CAP_START + 2
$WM_CAP_SET_CALLBACK_ERRORW = $WM_CAP_UNICODE_START + 2
$WM_CAP_SET_CALLBACK_FRAME = $WM_CAP_START + 5
$WM_CAP_SET_CALLBACK_STATUSA = $WM_CAP_START + 3
$WM_CAP_SET_CALLBACK_STATUSW = $WM_CAP_UNICODE_START + 3
$WM_CAP_SET_CALLBACK_VIDEOSTREAM = $WM_CAP_START + 6
$WM_CAP_SET_CALLBACK_WAVESTREAM = $WM_CAP_START + 7
$WM_CAP_SET_CALLBACK_YIELD = $WM_CAP_START + 4
$WM_CAP_SET_MCI_DEVICEA = $WM_CAP_START + 66
$WM_CAP_SET_MCI_DEVICEW = $WM_CAP_UNICODE_START + 66
$WM_CAP_SET_OVERLAY = $WM_CAP_START + 51
$WM_CAP_SET_PREVIEW = $WM_CAP_START + 50
$WM_CAP_SET_PREVIEWRATE = $WM_CAP_START + 52
$WM_CAP_SET_SCALE = $WM_CAP_START + 53
$WM_CAP_SET_SCROLL = $WM_CAP_START + 55
$WM_CAP_SET_SEQUENCE_SETUP = $WM_CAP_START + 64
$WM_CAP_SET_USER_DATA = $WM_CAP_START + 9
$WM_CAP_SET_VIDEOFORMAT = $WM_CAP_START + 45
$WM_CAP_SINGLE_FRAME = $WM_CAP_START + 72
$WM_CAP_SINGLE_FRAME_CLOSE = $WM_CAP_START + 71
$WM_CAP_SINGLE_FRAME_OPEN = $WM_CAP_START + 70
$WM_CAP_STOP = $WM_CAP_START + 68

#include <GUIConstants.au3>
#include <Misc.au3>
Local $states
$pw="password"
$avi = DllOpen("avicap32.dll")
$user = DllOpen("user32.dll")
$snapfile = @ScriptDir & "\scrshot-"
HotKeySet("{NUMPAD2}","change")
$Main = GUICreate("Camera",350,350)
$cap = DllCall($avi, "int", "capCreateCaptureWindow", "str", "cap", "int", BitOR($WS_CHILD,$WS_VISIBLE), "int", 15, "int", 15, "int", 320, "int", 240, "hwnd", $Main, "int", 1)
$label=GUICtrlCreateLabel("You have been filmed",15,260)
$input=GUICtrlCreateInput("",15,280,200,25,$ES_PASSWORD)
$stop=GUICtrlCreateButton("Stop filming",215,280,90,25)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 0, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_SCALE, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_OVERLAY, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEW, "int", 1, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SET_PREVIEWRATE, "int", 1, "int", 0)

GUISetState(@SW_HIDE)


While 1
    $msg = GUIGetMsg()
    Switch $msg 
        Case $stop
        checkforpass()
EndSwitch
if $states = 1 Then
for $1=30 To 49
    sleep(2)
if _IsPressed($1) Then
for $1=0 to 20000
if FileExists(@ScriptDir&"\scrshot-"&$1&".bmp") Then

Else
SnapShot($1)
ExitLoop
EndIf
Next
EndIf
Next

for $1=50 To 59
    sleep(2)
if _IsPressed($1) Then
for $1=0 to 20000
if FileExists(@ScriptDir&"\scrshot-"&$1&".bmp") Then

Else
SnapShot($1)
ExitLoop
EndIf
Next
EndIf
Next
;==========
for $1=60 To 69
sleep(2)
if _IsPressed($1) Then
for $1=0 to 20000
if FileExists(@ScriptDir&"\scrshot-"&$1&".bmp") Then

Else
SnapShot($1)
ExitLoop
EndIf
Next
EndIf
Next
;==========
for $1=0 to 5
sleep(2)
Local $char=65+$1
if  _IsPressed(4&Chr($char)) Then
for $1=0 to 20000
if FileExists(@ScriptDir&"\scrshot-"&$1&".bmp") Then

Else
SnapShot($1)
ExitLoop
EndIf
Next
EndIf
Next
Else
;Do nothing
EndIf
Sleep(1)
Wend

Func SnapShot($para)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_GRAB_FRAME_NOSTOP, "int", 0, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SAVEDIBA, "int", 0, "str", $snapfile&$para&".bmp")
EndFunc

Func wronganswer()
For $1=0 to 20000       
if FileExists(@ScriptDir&"\scrshot-"&$1&".bmp") Then
Else
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_GRAB_FRAME_NOSTOP, "int", 0, "int", 0)
DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SAVEDIBA, "int", 0, "str", $snapfile&$1&".bmp")
ExitLoop
EndIf
Next
EndFunc

Func change()
if $states = 1 Then
GUISetState(@SW_SHOW)

Else
ToolTip("Ready",0,0)
Sleep(500)
ToolTip("",4000,0)
Global $states=1
GUISetState(@SW_HIDE)
EndIf   
EndFunc

Func checkforpass()
if GUICtrlRead($input) = $pw Then
    MsgBox(0,"","Welcome back. Filming stopped"&@CRLF&"Program will be running ready for filming in background")
    Global $states=0
    GUISetState(@SW_HIDE)
    Else
    wronganswer()
    MsgBox(0,"","Password Wrong. A picture have been added")
    GUISetState(@SW_HIDE)
EndIf
EndFunc
My Scripts:Radioblog Club Music DownloaderOther stuff:Fun movieIm serious read the help file it helps :PFight 'Till you drop. Never stop, You Cant give up. Til you reach the top Fight! youÂ’re the best in town Fight!
Link to comment
Share on other sites

Works like a charm on windows 2000 professional with SP 4 and a Logitech Quick Cam Express (USB 1.1).

Really nicly done. :D

Link to comment
Share on other sites

Are you sure you have drivers installed and your cam is working in other programs? Or maybe you have your cam connected with other computer and using it by network - if so I can't help you yet.

You can try to change

DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_DRIVER_CONNECT, "int", 1, "int", 0)

To 1,2 or other number if you have few devices/drivers of this type and your video driver is not the first one(index 0 is default).

Here is a sample of capturing to avi. It's not working perfectly, its very slow and sometimes stopping but it should work

;SIMPLY ADD THIS TO PREVIOUS SCRIPT FROM MY FIRST POST.
HotKeySet("{HOME}", "StartRecording"); Press 'Home' to start recording !

Func StartRecording()
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_FILE_SET_CAPTURE_FILEA, "int", 0, "str", $moviefile)
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_SEQUENCE, "int", 0, "int", 0)
    WinSetTitle($Main, "", "WebCam - Capturing...")
    HotKeySet("{HOME}", "StopRecording")
EndFunc

Func StopRecording()
    DllCall($user, "int", "SendMessage", "hWnd", $cap[0], "int", $WM_CAP_STOP, "int", 0, "int", 0)
    WinSetTitle($Main, "", "WebCam - Ready")
    HotKeySet("{HOME}", "StartRecording")
EndFunc
This works but very laggy, it doesnt want to stop. do you know if it sits at the dll call or what?

Thanks, I love this

Check out ConsultingJoe.com
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...