s!mpL3 LAN Messenger
-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By TheAlienDoctor
Hi, I was looking into creating a script that would detect if a file exists, then move it (and in some cases rename it, depending on the file) as well as write to a log file.
The issue is, there is a lot of files that need to be moved, sometimes some files will exist and others won't depending on the use-case. However if a file does exist, it will always be going into the same directory with the same name.
Currently I have an array nested inside of the array, with each array inside that array having both the old and new directory, and then a For loop to actually run through and do the file transferring. The issue I am having is how to call the Array inside of the array, because how do I specify which the old directory is and which the new is?
Global $FileTransfer[2000] = [Global $Dir1[2] = ["original dir 1", "new dir 1"], Global $Dir2[2] = ["original dir 2", "new dir 2"]] For $FileTransfer = [0] To [1] Step +1 If FileExists({original dir}) Then FileMove({original dir}, new dir, 1) FileOpen("log.latest.txt", 1) FileWrite("log.latest.txt", "{original dir} found, moved it to new dir." & @CRLF) FileClose("log.latest.txt") Else FileOpen("log_latest.txt", 1) FileWrite("log_latest.txt", "{original dir} not found, ignoreing it." & @CRLF) FileClose("log_latest.txt") EndIf Next I have put what I want the old and new directory to be for each array in {}, so hopefully its easier to tell which part is working and whats not.
I am still reasonably new to AutoIT, any help is appreciated. Thankyou
-
IRC UDF - Updated Version of Chips' IRC UDF - Release: V1.22 - 09/06/2016 - Technical Writer Needed!By rcmaehl
A UDF to connect to IRC using TCP Functions, as well as perform actions once connected.
WANTED: Technical Writer able to create / maintain a helpfile (.chm) using the Autoit helpfile layout for an negotiated rate.
Notes:
Originally created by Chip.
UDF Headers updated compared to old script.
Error and Parameter Handling updated compared to old script.
If you need to bypass the RFC compliance of this UDF, use _IRCRaw.
The majority of the old functions have been modified. It will break most, if not all, scripts using the old UDF.
These commands should work on every server following either RFC 1459 (legacy) or RFC 2812 (preferred).
Potential Uses:
IRC Chat Clients
Chatroom Integration for software
IRC Bots for Channel / Server Administration
IRC Bots for Games such as Hangman, Mafia, and WereWolf
Remote Administration without having to setup your own AutoIt server
Functions:
_IRCChannelInvite
_IRCChannelJoin
_IRCChannelKick
_IRCChannelPart
_IRCChannelTopic
_IRCConnect
_IRCDisconnect
_IRCGetMsg
_IRCMultiMode
_IRCMultiSendMsg
_IRCRaw
_IRCSelfOper
_IRCSelfSetNick
_IRCSelfSetStatus
_IRCServerPing
_IRCServerPong
_IRCServerTime
_IRCServerVersion
Extra Functions:
_IRCReplyTo (IRCExtras.au3)
_IRCStripSpecial (IRCExtras.au3)
Downloads:
Additional Links:
Chips' Old UDF Topic:
DISCLAIMER:
While these downloads are more stable than the ones above, I do not have time to thoroughly test all functions and variable entries. If something doesn't work as expected or gives you an error please check @error and @extended variables then create a reply to this topic.
Changelog:
09/06/2016: IRC.au3 Fixed : Updated Headers to UDF-spec (- instead of =) _IRCGetMsg Fixed : Incorrect Return Value On Error _IRCStripSpecial Added : Better documentation of Flags _IRCMultiSendMsg Added : Better documentation of Flags _IRCMultiSendMsg Fixed : Max Message Size based on https://forums.unrealircd.org/viewtopic.php?t=6811 Updated all files to consider themselves a standalone install by default All Functions that didn't Return anything now return Number of bytes sent Slight Performance Improvements by using Parameter Gating instead of Single Input Single Output 07/21/2016: Example.au3 Fixed : Includes Example.au3 Renamed: IRC_Example.au3 IRC.au3 Changed: Minor Performance Improvements 04/18/2016: IRCConstants.au3 Updated: A Ton of New Constants added IRCMultiSendMsg Added : Color Example Increased TCP Timeout in all Examples 04/13/2016: CUI.au3 Updated: Errors now output to Error Stream in Console (C/G)UI.au3 Fixed : Userlists (FOR REAL THIS TIME) by being sure to get the current channel Removed: Duplicate Constants File Include Removed: Local Declaration inside of While loop for Performance Updated: TCPTimeout Increased Updated: $sTemp renamed $sStrip for Readibility Example.au3 Updated: TCPTimeout Increased GUI_Client.au3 Renamed: GUI.au3 _IRCStripSpecial Added : Parameter Checking Updated: Documentation _IRCMultiSendMsg Added : Additional flags for Message Type (POSSIBLY SCRIPT BREAKING if using $_bTrim!) Updated: Example to show new flags Updated: Increase Max Message Size from 368 To 436 04/09/2016: IRC.au3 Updated: All Documentation Added : Now has a Constaznts file _IRCConnnect Fixed : Now PROPERLY returns any errors _IRCGetMsg Removed: $_iChars parameter since it gets one packet at a time and parsing is easier _IRCReplyTo Fixed : Now properly returns username _IRCStripSpecial Added : Now uses Constants File All files are now in a single ZIP Includes 2 basic IRC "clients", a CUI, and a GUI 07/15/2015: Example.au3 Added : Improved Debugging Updated: All Space Indents to Tab Idents IRC.au3 Removed: Exception skipping @error = -1 in IRCGetMsg() as 3.3.14.0 fixed it 07/15/2015: Example.au3 Added : Ping Timeout Fixed : Userlist clipping of last user IRC.au3 Fixed : IRCGetMsg() Hang 07/08/2015: Example.au3 Fixed : User Lists Fixed : Nickname now switches to backup nickname if first choice is already in use IRC.au3 Added : UDF Index Added : #include-once Updated: All Functions updated to Single Entry, Single Exit Updated: Now passes Au3Check on -q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 01/15/2015: Example.au3 Fixed : Ampersand channels causing a crash 12/20/2014: Example.au3 Fixed : Nicks not updating on all channel lists when a user changed their nick Fixed : Nicks not deleting on all channel lists when a user quits the network 12/19/2014: Example.au3 Added : User lists Added : Channel lists Added : Bot keeps track of own nick Added : Secondary nick in case first nick choice is in use. Added : Extremely Minor performance improvements _IRCConnect Added : Improved parameter checking _IRCGetMsg Updated: Now only retrieves one packet by default (MAY be script breaking) 10/14/2014: Example.au3 Added : Shutdown TCP on exit Fixed : $Recipient now gets the actual Recipient instead of the 3rd message Added : Now exits when told to quit. IRC.au3 Added : Improved Error Reporting (Includes @extended on error) _IRCDisconnect Added : Close Socket on Disconnect _IRCStripSpecial Added : Improved Color Stripping 09/28/2014: _IRCConnect Fixed : Checking if Mode was blank. _IRCGetMsg Fixed : Spamming of 0 and incorrectly thinking there was an error. 09/28/2014: IRC.au3 Fixed : All functions now return when errors are encountered instead of continuing _IRCConnect Added : Now returns an error if optional password failed to send _IRCGetMsg Added : Now returns an error if it failed to receive a custom amount of data _IRCServerVersion Fixed : Capitalized "Version" 09/26/2014: Example.au3 Fixed : Pings not ending with @CRLF IRCExtras.au3 Added : _IRCStripSpecial(), Cleans special characters sometimes seen in IRC 09/24/2014: Example.au3 Added : Checking for PrivMsg Fixed : Infinite loop if you removed _IRCDisconnect Updated: Bot now disconnects when receiving "!quit" instead of automatically Discontinuted BETA UDF project. 04/20/2014: IRCExtras.au3 Added : Additional IRC Functions _IRChangeNick Renamed: _IRCSelfSetNick (SCRIPT BREAKING! Fix: Replace _IRCChangeNick with _IRCSelfSetNick) _IRCGetMsg Fixed : Now no longer Splits Packets if Default option is used _IRCChannelInvite Added : Invites a User to a Channel _IRCChannelKick Added : Kick a User from a channel _IRCJoinChannel Renamed: _IRCChannelJoin (SCRIPT BREAKING! Fix: Replace _IRCJoinChannel with _IRCChannelJoin) _IRCMode Renamed: _IRCMultiMode (SCRIPT BREAKING! Fix: Replace _IRCMode with _IRCMultiMode) _IRCOper Renamed: _IRCSelfOper (SCRIPT BREAKING! Fix: Replace _IRCOper with _IRCSelfOper) _IRCPartChannel Renamed: _IRCChannelPart (SCRIPT BREAKING! Fix: Replace _IRCPartChannel with _IRCChannelPart) _IRCPing Renamed: _IRCServerPing (SCRIPT BREAKING! Fix: Replace _IRCPing with _IRCServerPing) _IRCPong Renamed: _IRCServerPong (SCRIPT BREAKING! Fix: Replace _IRCPong with _IRCServerPong) _IRCSelfSetStatus Added : Sets you AFK and un-AFK _IRCSendMessage Renamed: Renamed _IRCMultiSendMsg. (SCRIPT BREAKING Fix: Replace IRCSendMessage with IRCMultiSendMsg) _IRCSendMessageRaw Renamed: Renamed _IRCRaw (SCRIPT BREAKING! Fix: Replace _IRCSendMessageRaw with _IRCRaw) _IRCServerTime Added : Get time from a Server _IRCServerVersion Added : Get Software Version from a Server _IRCTopic Renamed: _IRCChannelTopic (SCRIPT BREAKING! Fix: Replace _IRCTopic with _IRCChannelTopic) Improved Parameter detection in all Functions Renamed Functions to show who/what they effect, MASSIVE Script Breaking. Sorry! :/ 04/06/2014: _IRCGetMsg Added : Use to get IRC Messages. _IRCSetTopic Changed: Now named _IRCTopic (SCRIPT BREAKING! Fix: Replace _IRCSetTopic with _IRCTopic) Changed: Can now be used to query topic and does so by default. Use "" to blank the topic All functions now thoroughly check their parameters Updated all functions to use @extended to some errors Fixed @error returning 0 by starting all errors at 1 instead of 0 03/20/2014: _IRCChangeMode Changed: Now named _IRCMode (SCRIPT BREAKING! Fix: Replace _IRCChangeMode with _IRCMode) Changed: $_sMode is now OPTIONAL. Allowing the command to be used to Query current mode as well _IRCConnect Fixed : Missing Colon Before $_sRealName. It should now allow Real Names with spaces _IRCDisconnect Fixed : Issue with Blank Messages. Should now properly blank to Default _IRCPing Changed: $_Server is now REQUIRED. (SCRIPT BREAKING! Fix: Specify a server as Parameter 2) _IRCSendMessage Added : $_bTrim, Trims message if too long instead of breaking up the message, Default is true _IRCSetTopic Added : Command for setting a Channel Topic Updated Most Functions to include better error checking Updated Most Channel Related Functions to check for valid channels 03/16/2014: _IRCChangeMode Added : Optional parameters for channel modes Changed: Parameter ordering Target is now before Mode (SCRIPT BREAKING! Fix: Swap Parameters 2 and 3) _IRCConnect Changed: No longer exits the script on error, instead returns TCPConnect Error Code _IRCJoinChannel Added : Now Supports Channel Passwords _IRCOper Added : Command for IRC Server Operator Login Updated All Functions to have UDF standard error codes 02/24/2014: _IRCSendMessage Changed: Split Into _IRCSendMessage and _IRCSendMessageRaw (SCRIPT BREAKING! No Simple Fix Available) 02/23/2014: Made variables comply to UDF Standards http://www.autoitscript.com/autoit3/udfs/UDF_Standards.htm Removed MsgBoxes left over from old UDF Updated / Uploaded IRC.au3 Known and Reported Bugs:
Message output only displays ANSI characters in CUI. (Can't Fix) Freenode requires registration for part messages thus the part message in example doesn't show up (Can't fix) Messages (e.g. PRIVMSG) are not forwarded?, when it contains umlauts/german mutations and when the message only contains a dot '.' (Unconfirmed) Warnings:
Do NOT send a lot of messages at once. MOST networks will disconnect you. SOME networks will permanently ban you. A MINORITY will harshly retailiate. Do NOT use the Sleep() function in your scripts. It prevents you from receiving any new data, can disconnect your from the network, and have other undesired consequences. Use the TimerInit() and TimerDiff() functions and possibly a message queue. To Do:
Possibly add in SSL functionality Create More Functions for IRC commands An entire IRC daemon written in AutoIt Possibly Include Kips TCP UDF for ASync Port Listening in Example Create Additional UDFs for extras such as CTCP, DCC, and Error Lookup Experiment with having functions check for the reply and see if reliable. Upcoming Changes:
To Be Decided Support:
Support for this UDF can be obtained in my Discord Server
-
By AoRaToS
I started working on this program in the summer of 2008 then I stopped cause I faced some problems I couldn't overcome back then. Now that I've practiced more and have become a better scripter/programmer I'm releasing the program to the public to get some opinions. I know it's not a new concept but it's the first program I started besides some small stuff I did just for practice! I won't post the source code yet because it's still under construction, although I'm sure I've posted early stages of the code with bugs in the past in some topic...
What I wanted was a simple, small, serverless program that would work without installation cause I wanted it for where I work, so I ended up with this!
I have attached some images of various versions, also visit the forum thread.
The package includes s!mpL3 LAN Messenger and the full change log.
Current version 2.9.9.1! [04/07/2019]
Check the Change Log below!
http://www.autoitscript.com/forum/index.php?showtopic=88782
Read the license before using this software.
-
By therks
Hi there,
So I've created this very simple "chat" program so that my brother and I can quickly and easily share text and links to other computers on the network. It just reads/writes to a text file that the script interprets/formats appropriately. I will put the script it in a shared network folder and then any of the computers can open and use it.
For displaying the "chat" I'm currently using an embedded IE browser and formatting the text via HTML, but I've realized that this will cause problems with opening the links because it will use IE instead of the system's default browser (Chrome in our case). Any suggestions? (To be clear, I'm specifically looking for assistance on having text with clickable links that will open in the default browser.)
For anyone interested, here's the code so far:
#include <GUIConstants.au3> #include <GUIEdit.au3> #include <IE.au3> Opt('TrayIconDebug', 1) Global $CHAT_FILE = @ScriptDir & '\NetworkChat.txt' Main() Func Main() Local $hGUIMain = GUICreate('Network Chat', 500, 500, Default, Default, $WS_OVERLAPPEDWINDOW) Local $oEmbedIE = _IECreateEmbedded() Local $ob_EmbedIE = GUICtrlCreateObj($oEmbedIE, 5, 5, 490, 300) GUICtrlSetResizing(-1, $GUI_DOCKBORDERS) _IENavigate($oEmbedIE, 'about:blank') Local $dm_AccelTab = GUICtrlCreateDummy() Local $dm_AccelCtrlA = GUICtrlCreateDummy() Local $dm_AccelEnter = GUICtrlCreateDummy() Local $dm_AccelShiftEnter = GUICtrlCreateDummy() Local $dm_AccelPgUp = GUICtrlCreateDummy() Local $dm_AccelPgDn = GUICtrlCreateDummy() Local $ed_Chat = GUICtrlCreateEdit('', 5, 310, 470, 60, BitOR($ES_WANTRETURN, $WS_VSCROLL, $ES_AUTOVSCROLL)) GUICtrlSetResizing(-1, BitOR($GUI_DOCKSTATEBAR, $GUI_DOCKLEFT, $GUI_DOCKRIGHT)) Local $aTabStop = [ 4 * 4 ] _GUICtrlEdit_SetTabStops($ed_Chat, $aTabStop) Local $bt_Send = GUICtrlCreateButton('>', 475, 310, 20, 60) GUICtrlSetResizing(-1, BitOR($GUI_DOCKSTATEBAR, $GUI_DOCKSIZE, $GUI_DOCKRIGHT)) GUICtrlSetState(-1, $GUI_DEFBUTTON) Local $ch_Timestamps = GUICtrlCreateCheckbox('Show ×tamps', 5, 370, 200, 20) GUICtrlSetResizing(-1, BitOR($GUI_DOCKSTATEBAR, $GUI_DOCKSIZE, $GUI_DOCKLEFT)) Local $ra_Enter = GUICtrlCreateRadio('&1. Enter to send / Shift+Enter for new line', 280, 370, 215, 20) GUICtrlSetResizing(-1, BitOR($GUI_DOCKSTATEBAR, $GUI_DOCKSIZE, $GUI_DOCKRIGHT)) GUICtrlSetState(-1, $GUI_CHECKED) Local $ra_ShiftEnter = GUICtrlCreateRadio('&2. Shift+Enter to send / Enter for new line', 280, 390, 215, 20) GUICtrlSetResizing(-1, BitOR($GUI_DOCKSTATEBAR, $GUI_DOCKSIZE, $GUI_DOCKRIGHT)) Local $aAccel = [ _ [ '{enter}', $dm_AccelEnter ], _ [ '+{enter}', $dm_AccelShiftEnter ], _ [ '{tab}', $dm_AccelTab ], _ [ '{pgup}', $dm_AccelPgUp ], _ [ '{pgdn}', $dm_AccelPgDn ], _ [ '^a', $dm_AccelCtrlA ] ] Local $aAccelSwap = $aAccel $aAccelSwap[0][0] = '+{enter}' $aAccelSwap[1][0] = '{enter}' GUISetAccelerators($aAccel) GUISetState() GUICtrlSetState($ed_Chat, $GUI_FOCUS) Local $sHTML, $aChatTime[2], $hFocused, $hIEControl = ControlGetHandle($hGUIMain, '', '[CLASS:Internet Explorer_Server; INSTANCE:1]') While 1 $hFocused = _WinAPI_GetFocus() $aChatTime[0] = FileGetTime($CHAT_FILE, 0, 1) If $aChatTime[0] <> $aChatTime[1] Then $sHTML = _LoadChat(BitAND(GUICtrlRead($ch_Timestamps), $GUI_CHECKED)) _IEDocWriteHTML($oEmbedIE, $sHTML) _IEAction($oEmbedIE, 'refresh') $oEmbedIE.document.parentwindow.scrollTo(0, $oEmbedIE.document.body.scrollHeight) $aChatTime[1] = $aChatTime[0] EndIf Local $iMsg = GUIGetMsg() If $iMsg > 0 Then ConsoleWrite($iMsg & @CRLF) Switch $iMsg Case $ch_Timestamps $aChatTime[1] = 0 Case $ra_Enter GUISetAccelerators($aAccel) Case $ra_ShiftEnter GUISetAccelerators($aAccelSwap) Case $dm_AccelPgUp $oEmbedIE.document.parentwindow.scrollBy(0, -200) Case $dm_AccelPgDn $oEmbedIE.document.parentwindow.scrollBy(0, 200) Case $dm_AccelCtrlA If $hFocused = GUICtrlGetHandle($ed_Chat) Then _GUICtrlEdit_SetSel($ed_Chat, 0, -1) Case $dm_AccelEnter If $hFocused = GUICtrlGetHandle($ed_Chat) Then If BitAND(GUICtrlRead($ra_Enter), $GUI_CHECKED) Then _SendChat($ed_Chat) Else _GUICtrlEdit_ReplaceSel($ed_Chat, @CRLF) EndIf EndIf Case $dm_AccelShiftEnter If $hFocused = GUICtrlGetHandle($ed_Chat) Then If BitAND(GUICtrlRead($ra_ShiftEnter), $GUI_CHECKED) Then _SendChat($ed_Chat) Else _GUICtrlEdit_ReplaceSel($ed_Chat, @CRLF) EndIf EndIf Case $bt_Send If $hFocused = GUICtrlGetHandle($ed_Chat) Then _SendChat($ed_Chat) Else GUICtrlSetState($ed_Chat, $GUI_FOCUS) EndIf Case $dm_AccelTab If $hFocused = GUICtrlGetHandle($ed_Chat) Then _GUICtrlEdit_ReplaceSel($ed_Chat, @TAB) Else GUICtrlSetState($ed_Chat, $GUI_FOCUS) EndIf Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd EndFunc Func _EncodeForFile($sString) $sString = StringStripCR($sString) $sString = StringReplace($sString, '\', '\\') $sString = StringReplace($sString, @LF, '\n') $sString = StringReplace($sString, @TAB, '\t') Return $sString EndFunc Func _EncodeFromFile($sString) $sString = StringReplace($sString, '<', '<') $sString = StringReplace($sString, '>', '>') $sString = StringFormat($sString) $sString = StringReplace($sString, @TAB, ' ') $sString = StringReplace($sString, @LF, '<br />') $sString = StringRegExpReplace($sString, '(http://\S+)', '<a href="\1" target="_blank">\1</a>') Return $sString EndFunc Func _SendChat($iCtrl) Local $sChat = StringStripWS(GUICtrlRead($iCtrl), 3) If $sChat Then FileWrite($CHAT_FILE, @CRLF & @YEAR & @MON & @MDAY & @HOUR & @MIN & @SEC & @TAB & @ComputerName & @TAB & _EncodeForFile($sChat)) GUICtrlSetData($iCtrl, '') Return True EndIf EndFunc Func _LoadChat($iShowTS) Local $aLines = FileReadToArray($CHAT_FILE), _ $sOutput = '<style>' $sOutput &= 'body, table { margin: 0; font-family: Arial; font-size: 0.8em; border-collapse: collapse; width: 100%; } ' $sOutput &= 'tr { vertical-align: top; text-align: left; } ' $sOutput &= '.name_column { white-space: nowrap; } ' $sOutput &= '.text_column { width: 100%; } ' $sOutput &= '.row1 { background: #eee; } ' $sOutput &= '.date { background: #bef; text-align: center; border: solid #000; border-width: 1px 0; } ' If Not $iShowTS Then $sOutput &= '.timestamp { display: none }' $sOutput &= '</style>' $sOutput &= '<table>' Local $sDateMem For $L = 0 To @extended-1 If Not $aLines[$L] Then ContinueLoop Local $aRegExLine = StringRegExp($aLines[$L], '(.+)\t(.+)\t(.+)', 1), $sChat If Not @error Then $aDateTime = _FormatTime($aRegExLine[0]) If $aDateTime[0] <> $sDateMem Then $sOutput &= '<tr><th class="date" colspan="2">' & $aDateTime[0] & '</th></tr>' $sDateMem = $aDateTime[0] EndIf $sOutput &= '<tr class="row' & Mod($L, 2) & '" title="' & $aDateTime[1] & '">' & _ '<th class="name_column"><span class="timestamp">[' & $aDateTime[1] & '] </span>' & $aRegExLine[1] & '</th>' & _ '<td class="text_column">' & _EncodeFromFile($aRegExLine[2]) & '</td></tr>' & @CRLF EndIf Next $sOutput &= '</table>' Return $sOutput EndFunc Func _FormatTime($sTime) Local $aMonths = StringSplit('Jan|Feb|Mar|Apr|May|Jun|Jul|Aug|Sep|Oct|Nov|Dec', '|') Local $aReturn[2] Local $aRegEx = StringRegExp($sTime, '(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})', 1) If Not @error Then $aReturn[0] = $aRegEx[0] &'-'& $aMonths[Int($aRegEx[1])] &'-'& $aRegEx[2] $aReturn[1] = $aRegEx[3] &':'& $aRegEx[4] &':'& $aRegEx[5] EndIf Return $aReturn EndFunc
-
By ModemJunki
Hello,
In Windows 10 PowerShell, one can do this to change the metric for a NIC in Windows 10:
Get-NetAdapter | Where-Object -FilterScript {$_.InterfaceAlias -Eq "Ethernet 2"} | Set-NetIPInterface -InterfaceMetric 2 I know I can script the above PowerShell line (and it works!), but I wanted to try something I hadn't done before after looking into jguinch's most excellent Network configuration UDF. I wanted to make use of the SetIPConnectionMetric method in the WMI classes. There is an example VBscript here but this is not for Windows 10. Using AutoIT would also give better control over capturing error return codes than with PowerShell.
But I cannot get my script to work! The return from SetIPConnectionMetric() is 0, which would indicate success. Yet the change does not happen. I also tried WMI methods using .put_ but this fails.
Anyone more experienced than I have ideas to make this work?
#RequireAdmin _SetNicInterfaceMetric2("Ethernet 2", "2") Func _SetNicInterfaceMetric2($NIC_NAME, $METRIC) Local $s_setIndx = 0 $objWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2") $colNICItems = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapter WHERE NetConnectionID = '" & $NIC_NAME & "'", "WQL") If IsObj($colNICItems) Then For $objItem In $colNICItems $s_nicIndex = $objItem.Index Next ConsoleWrite("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE Index = '" & $s_nicIndex & "'" & @CRLF) $colNAC = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE Index = '" & $s_nicIndex & "'", "WQL") If IsObj($colNAC) Then For $objNetCard In $colNAC If $METRIC <> $objNetCard.IPConnectionMetric Then ConsoleWrite("Metric was set to " & $objNetCard.IPConnectionMetric & ". Setting to " & $METRIC & "." & @CRLF) $s_isSet = $objNetCard.SetIPConnectionMetric($METRIC) ConsoleWrite("SetIPConnectionMetric Result = " & $s_isSet & @CRLF) Else ConsoleWrite("Metric is already set to " & $METRIC & @CRLF) EndIf Next EndIf EndIf EndFunc ;==>_SetNicInterfaceMetric2
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now