Jump to content

IRC UDF - Updated Version of Chips' IRC UDF - Release: V1.22 - 09/06/2016 - Technical Writer Needed!


rcmaehl
 Share

Recommended Posts

Since I've started a sit down job I've had more free time to develop this UDF and will continue to do so, however the only downside to this is I will be unable to test the scripts as IRC is blocked in the internal network. As such my next few updates with mainly be additions for stuff like CTCP, SASL, DCC, and other non-essential IRC add-ons.

 

EDIT: Woohoo, Page 4

Edited by rcmaehl

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to comment
Share on other sites

10 hours ago, rcmaehl said:

I will be unable to test the scripts as IRC is blocked in the internal network.

Why not run a local IRC server/daemon?

EasyCodeIt - A cross-platform AutoIt implementation - Fund the development! (GitHub will double your donations for a limited time)

DcodingTheWeb Forum - Follow for updates and Join for discussion

Link to comment
Share on other sites

On 9/17/2016 at 1:07 AM, TheDcoder said:

Why not run a local IRC server/daemon?

4GB of RAM and OS + Work software uses about 3.4GB. Work bought what they needed and no more. Plus it's probably in our employee handbook somewhere judging by the fact it's a huge fortune 500 tech company.

Edited by rcmaehl

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to comment
Share on other sites

  • 3 months later...

Hi rcmaehl,

First off, thank you very much for sharing this. Very awesome. I am using it to connect to twitch chat servers. It did not take me long to figure out and get connected. I am struggling a bit now though and would appreciate some insight. 

Although I am connected and can send messages to the channel, I am not able to capture any output from the channel beyond the initial connection stuff. In other words, I want to see all the chat, joins, parts etc so that I can react off that content. 

 

; Receive Data
    $sRecv = _IRCGetMsg($sock)

    ; If Error Getting Data
    If @error Then

        ; Display Message on Error
        ConsoleWrite("Recv Error: " & @error & " Extended: " & @extended & @CRLF)

        ; Shutdown Networking
        TCPShutdown()

        ; Exit with Error
        Exit 1

        ; Otherwise, If No Data
    ElseIf Not $sRecv Then
        ; Continue Checking
    EndIf

 

Link to comment
Share on other sites

btw. 
@rcmaehl   What You mean here: "Technical Writer Needed!" ?

Signature beginning:
Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Codefor other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskSchedulerIE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related:How to get reference to PDF object embeded in IE * IE on Windows 11

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuffOnHungApp handlerAvoid "AutoIt Error" message box in unknown errors  * HTML editor

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites

9 hours ago, Roue said:

I am using it to connect to twitch chat servers.

Twitch uses a modified version of IRC... not the regular version which IRC Chat Networks use! You might have to modify your script to be compatible with Twitch.

You can refer to this document: https://github.com/justintv/Twitch-API/blob/master/IRC.md

EasyCodeIt - A cross-platform AutoIt implementation - Fund the development! (GitHub will double your donations for a limited time)

DcodingTheWeb Forum - Follow for updates and Join for discussion

Link to comment
Share on other sites

  • 1 month later...
On 12/22/2016 at 6:05 PM, mLipok said:

btw. 
@rcmaehl   What You mean here: "Technical Writer Needed!" ?

@mLipok Someone to create .htm help files and clean up current documentation / notes.

 

On 12/23/2016 at 2:05 AM, TheDcoder said:

Twitch uses a modified version of IRC... not the regular version which IRC Chat Networks use! You might have to modify your script to be compatible with Twitch.

You can refer to this document: https://github.com/justintv/Twitch-API/blob/master/IRC.md

@TheDcoder is correct.

Edited by rcmaehl

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to comment
Share on other sites

4 minutes ago, rcmaehl said:

Someone to create .htm help files and clean up current documentation / notes.

If you find someone, please send him to me, I have for him a lot of voluntary work :)

 

Signature beginning:
Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Codefor other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskSchedulerIE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related:How to get reference to PDF object embeded in IE * IE on Windows 11

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuffOnHungApp handlerAvoid "AutoIt Error" message box in unknown errors  * HTML editor

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites

Just now, mLipok said:

If you find someone, please send him to me, I have for him a lot of voluntary work :)

Will do!

Edited by rcmaehl

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to comment
Share on other sites

12 hours ago, rcmaehl said:

Someone to create .htm help files and clean up current documentation / notes.

I have tried to document stuff in HTML but it is a pain in the butt and not easy to maintain. I have switched to AsciiDoc which is far more easier to maintain and you can convert it to HTML, PDF, ePub etc :D.

I use AsciiDoctor (implementation of AsciiDoctor in Ruby) to convert/compile my AsciiDoc document into a neat HTML file ;)

EasyCodeIt - A cross-platform AutoIt implementation - Fund the development! (GitHub will double your donations for a limited time)

DcodingTheWeb Forum - Follow for updates and Join for discussion

Link to comment
Share on other sites

On 2/4/2017 at 1:57 AM, TheDcoder said:

I have tried to document stuff in HTML but it is a pain in the butt and not easy to maintain. I have switched to AsciiDoc which is far more easier to maintain and you can convert it to HTML, PDF, ePub etc :D.

I use AsciiDoctor (implementation of AsciiDoctor in Ruby) to convert/compile my AsciiDoc document into a neat HTML file ;)

Interesting! Do you know if it's possible to style the Help File into a style similar to AutoIt's current help documentation? I'm trying not to stray too far from the current help file format.

My UDFs are generally for me. If they aren't updated for a while, it means I'm not using them myself. As soon as I start using them again, they'll get updated.

My Projects

WhyNotWin11
Cisco FinesseGithubIRC UDFWindowEx UDF

 

Link to comment
Share on other sites

@rcmaehl I think you can use custom CSS to make the formatting similar to AutoIt's Help File... albeit, it will only work for the HTML output.

I wish I could give you some links but I am myself a little confused about how custom styles work, best consult the documentation.

EasyCodeIt - A cross-platform AutoIt implementation - Fund the development! (GitHub will double your donations for a limited time)

DcodingTheWeb Forum - Follow for updates and Join for discussion

Link to comment
Share on other sites

If I remember well here on the forum, there was a script to convert UDF FunctionHeaders  >>> TXT  >>> HTML >>> CHM.

 

Signature beginning:
Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Codefor other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskSchedulerIE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related:How to get reference to PDF object embeded in IE * IE on Windows 11

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuffOnHungApp handlerAvoid "AutoIt Error" message box in unknown errors  * HTML editor

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites

Bingo, found the scripts and source code for the help file! You can download them from here: https://www.autoitscript.com/autoit3/files/beta/autoit/autoit-docs-v3.3.15.0-src.zip

If you extract the zip and go to docs -> _build you can find the scripts used for building the help file :)

bGWSYwn.png

EasyCodeIt - A cross-platform AutoIt implementation - Fund the development! (GitHub will double your donations for a limited time)

DcodingTheWeb Forum - Follow for updates and Join for discussion

Link to comment
Share on other sites

As far as I know this is only   TXT  >>> HTML >>> CHM

You should also looking for  UDF FunctionHeaders  >>> TXT

If I good remember this was @AZJIO or @jaberwacky project, but I could be wrong.

Edited by mLipok

Signature beginning:
Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Codefor other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskSchedulerIE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related:How to get reference to PDF object embeded in IE * IE on Windows 11

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuffOnHungApp handlerAvoid "AutoIt Error" message box in unknown errors  * HTML editor

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites

Just now, mLipok said:

You should also looking for  UDF FunctionHeaders  >>> TXT

Hmm... I have no idea where to find that :unsure:

EasyCodeIt - A cross-platform AutoIt implementation - Fund the development! (GitHub will double your donations for a limited time)

DcodingTheWeb Forum - Follow for updates and Join for discussion

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...