Jump to content

1 Screenshot

About This File

Opera Browser Automation UDF Library!

32 (and more to go) adapted functions to manipulate the most common routines for Opera Browser!

Note: This UDF Library tested on Opera versions: 8.54-9.5, 10.63.3516, few critical functions tested also on 11.x-12.x.

Change Log:

v1.08 [21.Jun.2013]

  • Fixed issue with getting opera profile path (mostly related to _OperaGetMailDir).

v1.07 [04.Jun.2013]

  • + Added _OperaGetDownloadsDir function.
  • + Added _OperaGetSessionFiles function.
  • + Added global $i_Opera_SearchAllDrives variable to allow profile dir detection on other drives. Usefull when installed more than one OS.
  • + Added global $s_Opera_ProfileDir variable to specify custom profile dir (this variable should be empty if you need to use _OperaGetProfileDir).
  • Fixed few functions to work better with new Opera versions.
  • Fixed internal __Opera_GetOperaPageHandle function (used in public _OperaScreenCapture function).

v1.06 [12.Jul.2012]

  • Fixed _OperaGetDir function:
    - To be compatible with x64 system.
    - Changed/expanded parameters, now used $iFlag to determine the function behavior, see function header for more details.
  • _OperaIsRuning function renamed to _OperaIsRunning. Old function name still supported.
  • Renamed internal functions to __Opera_*.

v1.05 [08.Jul.2012]

  • Fixed _OperaGetTitle function, the title was incorrect if $sOpDir was specified and $iRet <> 2.
  • Fixed __Correct_Opera_Path internal function to replace back slashes (/).

v1.04 [26.Jun.2011]

  • Fixed following functions to be more compatible with Opera 11.x:
    _OperaGetProfileDir
    _OperaMultiUserModeIsOn
    _OperaGetUserJSDir
    __Correct_Opera_Path
  • Fixed major bugs with recognizing Opera Dir (if $sOpDir parameter is passed as wrong Opera dir path).
  • Fixed _OperaGetUserJSDir function (now working better with relative pathes).
  • Renamed and changed _Opera_Integration_Example function. Now it's considered active function and named _Opera_Integration_Module.
  • Changed _OperaSelectFolder function. Added new optional parameter $hParent.
  • Changed _OperaAddMenuItem and _OperaRemoveMenuItem functions. Added new optional parameter $iBackup.
  • Fixed _OperaAddMenuItem function. Encoding issues.
  • + Added _OperaGetCacheDir function.
  • + Added optional $iGetLastInstallPath parameter to _OperaGetDir function.
    If this parameter is 1, then function will try to detect the last installed Opera path,
    instead of the path that Opera.exe was last time launched from.

v1.03 [16.May.2011]

  • UDF renamed to Opera.au3.
  • Fixed _OperaScreenCapture function (now compatible with Opera 10.6, but still having an issue with capturing panels).
  • Fixed few major issues with getting preference file's pathes.
  • Fixed _OperaGetDir() function.
  • Fixed _OperaGetProfileDir() function (errors when getting profile dir on multiuser mode).
  • Changed _OperaFindDir function.
    - Now the $sInitPath parameter can accept pathes (delimited with "|").
    - Now -1 as second parameter ($iRetCount) tels to the function to return all found Opera dirs.
    - Also the function now works faster.
  • + Opera 10.6 support.
  • + Added _OperaToggleMenuItemState function.
  • + Added optional $sStandard_Name parameter to _OperaSetConfigFile function:
    If this parameter is a string (default is -1), then it's used as standard file name
    (instead of "standard_" & $sConfig_Prefix & ".ini").

v1.02 [03.Jul.2009]

  • Now compatible with AutoIt 3.3.0.0.
  • + Opera 10 support.
  • + Added _OperaGetBookmarksFile() function.
  • + Added _OperaScreenCapture() function...
    ATTENTION: supported only for v3.2.10.0 or higher, due to (lack of) callback support.
  • + Added _OperaAddMenuItem()/_OperaRemoveMenuItem() function.
  • Fixed few function to read relative paths in opera prefs file.

v1.01 [5.Jan.2008]

  • Now compatible with AutoIt 3.2.10.0.
  • Variable names and spell corrections.
  • + Added 2 more UDFs:



    _OperaRestart()

    _OperaMultiUserModeIsOn()

v1.0 [28.Dec.2007]

First Release..


What's New in Version 1.08

Released

  • See «Change Log» above.

User Feedback

Recommended Comments

There are no comments to display.

  • Similar Content

    • By water
      I have started to rewrite the PowerPoint UDF similar to the Word, Excel and Outlook UDF. The new UDF will not be compatible with the existing one.
      I will add examples, documentation, a section in the wiki etc.
      So far the following functions have been coded - more are on the ToDo list.
      _PPT_Open: Open a connection to a running instance of PowerPoint or start a new one _PPT_Close: Close a PowerPoint instance _PPT_PresentationAttach: Attach to an already opened presentation _PPT_PresentationClose: Close a presentation _PPT_PresentationExport: Export one/multiple/all slides as PDF or XPS. _PPT_PresentationExportGraphic: Export one/multiple/all slides in a graphic format. _PPT_PresentationList: Returns a list of currently open presentations (added with version 1.0.0.0 2021-07-20) _PPT_PresentationNew: Create a new presentation _PPT_PresentationOpen: Open an existing presentation _PPT_Print: Print one/multiple/all slides of a presentation (added with version 1.0.0.0 2021-07-20) _PPT_PresentationSave: Save a presentation _PPT_PresentationSaveAs: Save a presentation to another location or with another type _PPT_ShapeDelete: Delete shape(s) (added with version 1.1.0.0) _PPT_SlideAdd: Add slide(s) to a presentation _PPT_SlideCopyMove: Copy, move, duplicate slide(s) _PPT_SlideDelete: Delete slide(s) _PPT_SlideShow: Show a presentation _PPT_TextFindReplace: Find & replace text throughout entire PowerPoint presentation (added with version 1.0.0.0 2021-07-20) Which functions do you want me to add to the UDF?
      ToDo list:
      create slide (JLogan3o13) - Done: _PPT_SlideAdd Apply template to slide (JLogan3o13) - Done: _PPT_SlideAdd Apply theme to slide (JLogan3o13) Cut/Copy/Duplicate/Move/Delete slide(s) (JLogan3o13) - Done: _PPT_SlideCopyMove, _PPT_SlideDelete Export slides (JLogan3o13) - Done: _PPT_PresentationExport Cut/Copy/Duplicate/Move/Delete shape(s) (JLogan3o13): Partially done : _PPT_ShapeDelete (added with version 1.1.0.0) ApplyAnimation, Select, SetDefaultProperties, and zOrder for shape(s) (JLogan3o13) Searching and replacing text (pcjunki) - Done: _PPT_TextFindReplace (added with version 1.0.0.0 2021-07-20) Export slides in a graphic format (JPG, GIF, PNG ...) (UEZ) - Done: _PPT_PresentationExportGraphic The UDF can be downloaded from the download forum.
       
    • By Hermes
      I have Index.html where it contains a frame with a source "frame1.html". I can select/highlight elements in index.html but unable to select/highlight elements inside the frame with the src "frame1.html", the autoit output is throwing error:
      __WD_Post: URL=HTTP://127.0.0.1:9515/session/2143396006437be4005db3b84acc1496/element/8be1c3c4-5bb1-42b1-8cde-7954765cbc61/element; $sData={"using":"css selector","value":"frameset:nth-of-type(1)"} __WD_Post: StatusCode=404; ResponseText={"value":{"error":"no such element","message":"no such element: Unable to locate element: {\"method\... __WD_Post ==> No match: {"value":{"error":"no such element","message":"no such element: Unable to locate element: {\"method\":\"css selector\",\"selector\":\"frameset:nth-of-type(1)\"}\n (Session info: chrome=90.0.4430.212)","stacktrace":"Backtrace:\n\tOrdinal0 [0x00FCE7D3+124883]\n\tOrdinal0 [0x00FCE7B1+124849]\n\tGetHandleVerifier [0x01218688+193832]\n\tGetHandleVerifier [0x0123C478+340760]\n\tGetHandleVerifier [0x012361F1+315537]\n\tGetHandleVerifier [0x012516BA+427354]\n\tGetHandleVerifier [0x01236176+315414]\n\tGetHandleVerifier [0x0125174A+427498]\n\tGetHandleVerifier [0x0125D6EB+476555]\n\tGetHandleVerifier [0x0125154B+426987]\n\tGetHandleVerifier [0x01234FFD+310941]\n\tGetHandleVerifier [0x01235D8E+314414]\n\tGetHandleVerifier [0x01235D19+314297]\n\tGetHandleVerifier [0x012F31EC+1089676]\n\tGetHandleVerifier [0x012F17C9+1082985]\n\tGetHandleVerifier [0x012F13A3+1081923]\n\tGetHandleVerifier [0x013ED9FD+2115741]\n\tOrdinal0 [0x0111B82E+1488942]\n\tOrdinal0 [0x010B5A7D+1071741]\n\tOrdinal0 [0x010B559B+1070491]\n\tOrdinal0 [0x010B54B1+1070257]\n\tOrdinal0 [0x010EFF53+1310547]\n\tBaseThreadInitThunk [0x770662C4+36]\n\tRtlSubscribeWnfStateChangeNotification [0x776B1B69+1081]\n\tRtlSubscribeWnfStateChangeNotification [0x776B1B34+1028]\n"}} Auto IT Script:
      #Include "wd_core.au3" #Include "wd_helper.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_Navigate($sSession, 'index.html') _WD_LoadWait($sSession) Local $index = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "frameset:nth-of-type(1)") Local $index1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "frameset:nth-of-type(1)", $index) Local $index2 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "frame:nth-of-type(1)", $index1) Local $index3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "frameset:nth-of-type(1)", $index2) _WD_HighlightElement($sSession, $index2, 1) _WD_HighlightElement($sSession, $index3, 1) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome  

      frame1.html index.html
    • By Hermes
      Hi, sometimes when I run my script in GUI (SciTe Editor) or as an executable file, the chrome driver launches but the chrome browser does not but when I re-run the script again - chrome driver launches and so does the browser. Here is the error that I'm getting:
      __WD_Post: StatusCode=0; ResponseText=WinHTTP request timed out before Webdriver... __WD_Post ==> Send / Recv error: WinHTTP request timed out before Webdriver _WD_CreateSession: WinHTTP request timed out before Webdriver _WD_CreateSession ==> Webdriver Exception: HTTP status = 0 Just wondering if there's a way to re-launch both the driver and browser without having to rerun the script/executable.
       
       
    • By Hermes
      Hello, the script below will read column A from an excel file - and if a value matches in the browser, it will click the corresponding link and click on a specific button to paste the data, then writes "Completed" in Column B. It will continue to read from the excel file and do the same thing for all the remaining rows.
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <File.au3> #include <IE.au3> #include <Array.au3> #include <INet.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> #Include "WinHttp.au3" #Include "_HtmlTable2Array.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "table1.html") _WD_LoadWait($sSession) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") Local $sElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") ;ConsoleWrite ("mat-table " & $sElement & @CRLF) Local $aArray1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//td[contains(@class,'data')]", $sElement, True) sleep(1000) For $i = 0 to UBound($aArray1) - 1 $aArray1[$i] = _WD_ElementAction($sSession, $aArray1[$i], 'text') Next ;_ArrayDisplay($aArray1) ;Email variables $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "Hermes" ; name from who the email was sent $FromAddress = "sender@gmail.com" ; address from where the mail should come $ToAddress = "recipient@gmail.com" ; destination address of the email - REQUIRED, use commas (,) to add more email addresses $Subject = "File not found" ; subject from the email - can be anything you want it to be $Body = "File not found!" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "High" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS $tls = 0 ; enables/disables TLS when required Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters If FileExists($sWorkbook) Then ;Check if the file exist. Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $iIdx Local $Skipline = 0 ;0==> first line Do Local $temprf For $i = 0 To UBound($aArray2) - 1 $temprf &= $aArray2[$i] _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]") Local $aElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]", $sElement, True) $iIdx = _ArraySearch($aArray1, $aArray2[$i]) If @error Then ContinueLoop _WD_ElementAction($sSession, $aElement[$iIdx], 'click') If $i < $Skipline Then ContinueLoop $oRange = $oWorkbook.ActiveSheet.Range("B" & $i + 1 & ":XFD" & $i + 1) _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) ;Paste Local $oTest4 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "pastebutton") _WD_ElementAction($sSession, $oTest4, 'click') Sleep(1000) ;Save Button Local $save3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "button.button") _WD_ElementAction($sSession, $save3, 'click') _Excel_RangeWrite($oWorkbook, $oWorkbook.Activesheet, "Completed", "B" & $i+1) sleep(1000) Next Until (Not @error) _Excel_Close($oWorkbook) Else _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) Exit EndIf _WD_LoadWait($sSession) ;Attaching files to emails Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send $objEmail="" EndFunc ;==>_INetSmtpMailCom Local $aDir = _FileListToArrayRec(@TempDir, "scoped_dir*;chrome_*", $FLTAR_FOLDERS, $FLTAR_NORECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) Sleep(2000) For $i = 1 To $aDir[0] DirRemove($aDir[$i], $DIR_REMOVE) Next _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome If the excel file doesn't exists in the folder, it will send an email to a specific recipient.
      What i am trying figure out now is if the excel crashes while the script/loop is running, I want to relaunch the excel file continue to the last row before the excel crashed. So if the value of column B is not marked as "completed", it should continue from that row
      Appreciate any help that I can get to achieve this.
      table1.html test.xlsx
    • By JiBe
      Hi to all,
       
       
      I only am accustomed pas has posted on the forum (coz, I'm french). But I use it a lot.
      So first of all, thank you all to participate in the evolution of this wonderful product.
      Today is not one day like any other, I myself am decide has posted a UDF that I myself create and developed (there may be some bug) for some months.
      So here it is:
      This UDF allows to use the SSH protocol very easily in your code.
      It uses the syntax as the TCPxxx() function.
      Your code will be easier to convert :-).
       
      excused my English, I'm French.
       
      Example:
       
      #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.4.0 Author: Joseph Barone 2010-2015 Script Function: Modele pour l'utilisation de la fonction ssh (plink). #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include #include #include #include #include #include "SSH_udf.au3" _SSHStartup() Global $butt[6] $Gui = GUICreate("SSH Console",550,400) $label1 = GUICtrlCreateLabel("Adresse IP:",10,10,150,20) ; ip $input1 = GUICtrlCreateInput("",10,25,150,20) ; ip $label2 = GUICtrlCreateLabel("Tcp port:",170,10,150,20) ; port $input2 = GUICtrlCreateInput("",170,25,60,20) ; port $label6 = GUICtrlCreateLabel("Protocol:",240,10,40,20) ; port $input6 = GUICtrlCreateInput("ssh",240,25,60,20) ; port $butt[0] = GUICtrlCreateButton("Connect0",310,5,80,20,$BS_DEFPUSHBUTTON) $butt[1] = GUICtrlCreateButton("Connect1",390,5,80,20) $butt[2] = GUICtrlCreateButton("Connect2",470,5,80,20) $butt[3] = GUICtrlCreateButton("Connect3",310,25,80,20) $butt[4] = GUICtrlCreateButton("Connect4",390,25,80,20) $butt[5] = GUICtrlCreateButton("Connect5",470,25,80,20) $Checkbox = GUICtrlCreateCheckbox("RSA, Fingerprint, Alert AutoValidate", 330, 45, 205, 25) $label4 = GUICtrlCreateLabel("Login:",10,45,150,20) ; login $input4 = GUICtrlCreateInput("",10,60,150,20) ; login $label5 = GUICtrlCreateLabel("Mot de passe:",170,45,150,20) ; password $input5 = GUICtrlCreateInput("",170,60,150,20,$ES_PASSWORD) ; password $label3 = GUICtrlCreateLabel("Commande a envoyer:",10,85,150,20) ; send command $input3 = GUICtrlCreateInput("",10,100,310,20) ; send commande vers l'hote $butt2 = GUICtrlCreateButton("Send",330,100,80,20,$BS_DEFPUSHBUTTON) GUICtrlSetState($butt2,$GUI_DISABLE) $edit = GUICtrlCreateEdit("",10,130,530,260,$WS_VSCROLL);,$WS_DISABLED)) GUISetState() Global $ConnectedSocket[6] = [-1,-1,-1,-1,-1,-1] Global $msg, $recv, $ret ; GUI Message Loop ;============================================== While 1 $nmsg = GUIGetMsg() If $nmsg = $GUI_EVENT_CLOSE Then ExitLoop ;;; connect part: $b = 0 While 1 If $nMsg = $butt[$b] Then If GUICtrlRead($butt[$b]) = "Connect"&$b Then _SSHParametreSet("yesall",GUICtrlRead($Checkbox)) _SSHParametreSet("protocol",GUICtrlRead($input6)) _SSHParametreSet("login",GUICtrlRead($input4)) _SSHParametreSet("passwd",GUICtrlRead($input5)) $ConnectedSocket[$b] = _SSHConnect(GUICtrlRead($input1),GUICtrlRead($input2)) If $ConnectedSocket[$b] = 0 Then MsgBox(0,"Erreur", "Impossible de ce connecter!!") Else GUICtrlSetData($butt[$b],"Close"&$b GUICtrlSetState($butt2,$GUI_ENABLE) EndIf DisplayArray($_config) ConsoleWrite("nb config:"&$_nbconf&@CRLF) Else _SSHCloseSocket($ConnectedSocket[$b]) GUICtrlSetData($butt[$b],"Connect"&$b GUICtrlSetState($butt2,$GUI_DISABLE) DisplayArray($_config) ConsoleWrite("nb config:"&$_nbconf&@CRLF) EndIf EndIf ;;; send part: If $nMsg = $butt2 Then $ret = _SSHSend( $ConnectedSocket[$b] , GUICtrlRead($input3)&@crlf) GUICtrlSetData($input3,"") GUICtrlSetState($input3,$GUI_FOCUS) EndIf ;;; receive part: $recv = _SSHRecv( $ConnectedSocket[$b]) If $recv <> "" Then GUICtrlSetData($edit, GUICtrlRead($edit) & $recv ) EndIf GUICtrlSendMsg($edit, $EM_SCROLL, $SB_PAGEDOWN, 0) $b += 1 If $b = UBound($butt) Then ExitLoop WEnd WEnd _SSHCloseSocket($ConnectedSocket) _SSHShutdown() Exit Func DisplayArray($array) $i = 0 $j = 0 if UBound($array,1) = 0 Then Return While 1 ConsoleWrite("(["&UBound($array,1)&"]["&UBound($array,2)&"]) ") While 1 ConsoleWrite("["&$j&"]"&$array[$i][$j]&" ") $j += 1 if UBound($array,2)<=$j Then ExitLoop WEnd ConsoleWrite(@CRLF) $i += 1 $j = 0 if UBound($array,1)<=$i Then ExitLoop WEnd EndFunc   
      I join with UDF version of modified putty myself.  🙂 LoL
      but, it is not used with the UDF, it is included in the UDF.
       
      putty-04012015- 92453+lic.zip
      ssh_udf.zip
      New version (contains the latest version of plink (0.74) edited by http://jakub.kotrla.net/putty/) 
      ssh_udf-v2.zip
      Same as the v2 but supports all putty/plink settings
      ssh_udf-v2.1.zip
×
×
  • Create New...