Auto-SignIn 0.9.7

Q1) How to do GUIDelete() while using the script when a specific process starts?
Q2) How to change (X) "Close"button behavior? 
Q3) I am VPS Retailer and i want to control my Users that uses bad programs, such as Port Scanners and so on... I had created script to tell me what are they doing, but they removes my script from Windows Registry Startup paths, Common Startup paths, Task Schedules and so on... How to make my script protect itself from being closed and start as main process of windows at startup? 

I am sure you guys know of a simple solution but I am still kind of new to AutoIt and its special functions. I want my code to be able to know how to encrypt and decrypt "A" and "a" as two different chars.
my code is very long so here is just a snippet/example of it.  
;Encode== Global $charAA = "" ; ( Capital letter A ) = Global 184 = ¸ ( Cedilla ) $charAA = $charAA & Chr(65) Global $chara = "" ; ( Lowercase letter a ) = Global 251 = û ( û Latin Small Letter U With Circumflex ) $chara = $chara & Chr(97) ;Decode== Global $ch184 = "" ;( Copyright symbol ) = $charAA $ch184 = $ch184 & Chr(184) Global $ch251 = "" ;( û Latin Small Letter U With Circumflex ) = $chara $ch251 = $ch251 & Chr(251) ;Encode== stringreplace($test_String, $charAA, $ch184) stringreplace($test_String, $chara, $ch251) ;Decode== stringreplace($$new_String, $ch184, $charAA) stringreplace($$new_String, $ch251, $chara) ( NOTE: my stringreplace function is nested in my actual code. I only separated them here for readability. )

I know there are better ways to Encrypt and Decrypt a message but I'm doing this as a fun side project for me and a select group of friends to enjoy. 
Again My code is not encrypting or decrypting capitals and lower case properly even though I use their ANSI codes. 
 
Example: Input "A a B b"  Encrypt: ". . $ $"  Decrypt: "A A B B"
Any and all help will be greatly appreciated.  

Hello guys. 
I totaly reworked a script to get less problem(Melba23) and i used a topic to copy an existing script and modified it. 
Since my last post it was bad evaluated as a spam bot but by my fault since i have not explained the purpose of it corectly. (Yes i got ugly english)
 
Then FIRST OF ALL the purpose of this script is to allow a call center to complet multiple fields in internet explorer and optionnaly; i am gonna see that after the principal code to configure multiple email that can be send. I know there is some UDF for outlook etc... but i want a single script to do all. this is the way i want to do that. 
 
Ok this is my complete code for the moment. 
#cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: myName Script Function: Template AutoIt script. #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <Misc.au3> $dll = DllOpen("user32.dll") Global $EnvoyerMess1Sub1 Global $EnvoyerMess2Sub1 Global $EnvoyerMess3Sub1 Global $EnvoyerMess4Sub1 Global $EnvoyerMess5Sub1 Global $EnvoyerMess1Sub2 Global $EnvoyerMess2Sub2 Global $EnvoyerMess3Sub2 Global $EnvoyerMess4Sub2 Global $EnvoyerMess5Sub2 Global $EnvoyerMess1Sub3 Global $EnvoyerMess2Sub3 Global $EnvoyerMess3Sub3 Global $EnvoyerMess4Sub3 Global $EnvoyerMess5Sub3 Global $EnvoyerMess1Sub4 Global $EnvoyerMess2Sub4 Global $EnvoyerMess3Sub4 Global $EnvoyerMess4Sub4 Global $EnvoyerMess5Sub4 Global Const $SettingsFile = @SCRIPTDIR & '\Settings.ini' $Setting1 = IniRead ($SettingsFile, 'Stats', 'Utilisation', "ERROR") IniWrite ($SettingsFile, 'Stats', 'Utilisation',$Setting1+1) $Valeur1 = IniRead ($SettingsFile, 'NomMenu', 'Menu1', "ERROR") $Valeur2 = IniRead ($SettingsFile, 'NomMenu', 'Menu2', "ERROR") $Valeur3 = IniRead ($SettingsFile, 'NomMenu', 'Menu3', "ERROR") $Valeur4 = IniRead ($SettingsFile, 'NomMenu', 'Menu4', "ERROR") $Valeur11 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.1', "ERROR") $Valeur12 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.2', "ERROR") $Valeur13 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.3', "ERROR") $Valeur14 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.4', "ERROR") $Valeur15 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu1.5', "ERROR") $Valeur21 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.1', "ERROR") $Valeur22 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.2', "ERROR") $Valeur23 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.3', "ERROR") $Valeur24 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.4', "ERROR") $Valeur25 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu2.5', "ERROR") $Valeur31 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.1', "ERROR") $Valeur32 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.2', "ERROR") $Valeur33 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.3', "ERROR") $Valeur34 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.4', "ERROR") $Valeur35 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu3.5', "ERROR") $Valeur41 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.1', "ERROR") $Valeur42 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.2', "ERROR") $Valeur43 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.3', "ERROR") $Valeur44 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.4', "ERROR") $Valeur45 = IniRead ($SettingsFile, 'NomMenu', 'SousMenu4.5', "ERROR") $Message11 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message12 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message13 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message14 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message15 = IniRead ($SettingsFile, 'Messages', 'Message11', "ERROR") $Message21 = IniRead ($SettingsFile, 'Messages', 'Message21', "ERROR") $Message22 = IniRead ($SettingsFile, 'Messages', 'Message22', "ERROR") $Message23 = IniRead ($SettingsFile, 'Messages', 'Message23', "ERROR") $Message24 = IniRead ($SettingsFile, 'Messages', 'Message24', "ERROR") $Message25 = IniRead ($SettingsFile, 'Messages', 'Message25', "ERROR") $Message31 = IniRead ($SettingsFile, 'Messages', 'Message31', "ERROR") $Message32 = IniRead ($SettingsFile, 'Messages', 'Message32', "ERROR") $Message33 = IniRead ($SettingsFile, 'Messages', 'Message33', "ERROR") $Message34 = IniRead ($SettingsFile, 'Messages', 'Message34', "ERROR") $Message35 = IniRead ($SettingsFile, 'Messages', 'Message35', "ERROR") $Message41 = IniRead ($SettingsFile, 'Messages', 'Message41', "ERROR") $Message42 = IniRead ($SettingsFile, 'Messages', 'Message42', "ERROR") $Message43 = IniRead ($SettingsFile, 'Messages', 'Message43', "ERROR") $Message44 = IniRead ($SettingsFile, 'Messages', 'Message44', "ERROR") $Message45 = IniRead ($SettingsFile, 'Messages', 'Message45', "ERROR") BuildHiddenGUI() While 1 Sleep ( 10 ) If _IsPressed("04", $dll) Then CallCustomContextMenu() $msg = GUIGetMsg() Switch $msg ;~ ===================================================== Case $EnvoyerMess1Sub1 ;~ MouseClick("left") Send(""&$Message11) Case $EnvoyerMess2Sub1 Send(""&$Message12) Case $EnvoyerMess3Sub1 Send(""&$Message13) Case $EnvoyerMess4Sub1 Send(""&$Message14) Case $EnvoyerMess5Sub1 Send(""&$Message15) ;~ ====================================================== Case $EnvoyerMess1Sub2 Case $EnvoyerMess2Sub2 Case $EnvoyerMess3Sub2 Case $EnvoyerMess4Sub2 Case $EnvoyerMess5Sub2 ;~ ====================================================== Case $EnvoyerMess1Sub3 Case $EnvoyerMess2Sub3 Case $EnvoyerMess3Sub3 Case $EnvoyerMess4Sub3 Case $EnvoyerMess5Sub3 ;~ ======================================================= Case $EnvoyerMess1Sub4 Case $EnvoyerMess2Sub4 Case $EnvoyerMess3Sub4 Case $EnvoyerMess4Sub4 Case $EnvoyerMess5Sub4 ;~ ====================================================== Case $ConfigITEM EndSwitch WEnd DllClose($dll) Func BuildHiddenGUI() Global $Contextmenu, $msg, $GUI, $aTSR Global $SubMenu1, $folderitem, $programitem, $fileitem, $ConfigITEM, $otheritem Global $folderitem1, $folderitem2, $programitem1, $programitem2 $aTSR = _GetTotalScreenResolution() $GUI = GuiCreate("GUI Context Menu",1,1, $aTSR[0], 1,BitOR($WS_POPUP,$WS_BORDER),BitOr($WS_EX_TOPMOST,$WS_EX_TOOLWINDOW)) WinSetTrans( $GUI, '', 1) GUISetState() $Contextmenu = GUICtrlCreateContextMenu() $SubMenu1 = GUICtrlCreateMenu(""&$Valeur1, $Contextmenu) $EnvoyerMess1Sub1 = GUICtrlCreateMenuItem(""&$Valeur11, $SubMenu1) $EnvoyerMess2Sub1 = GUICtrlCreateMenuItem(""&$Valeur12, $SubMenu1) $EnvoyerMess3Sub1 = GUICtrlCreateMenuItem(""&$Valeur13, $SubMenu1) $EnvoyerMess4Sub1 = GUICtrlCreateMenuItem(""&$Valeur14, $SubMenu1) $EnvoyerMess5Sub1 = GUICtrlCreateMenuItem(""&$Valeur15, $SubMenu1) $SubMenu2 = GUICtrlCreateMenu(""&$Valeur2, $Contextmenu) $EnvoyerMess1Sub2 = GUICtrlCreateMenuItem(""&$Valeur21, $SubMenu2) $EnvoyerMess2Sub2 = GUICtrlCreateMenuItem(""&$Valeur22, $SubMenu2) $EnvoyerMess3Sub2 = GUICtrlCreateMenuItem(""&$Valeur23, $SubMenu2) $EnvoyerMess4Sub2 = GUICtrlCreateMenuItem(""&$Valeur24, $SubMenu2) $EnvoyerMess5Sub2 = GUICtrlCreateMenuItem(""&$Valeur25, $SubMenu2) $SubMenu3 = GUICtrlCreateMenu(""&$Valeur3, $Contextmenu) $EnvoyerMess1Sub3 = GUICtrlCreateMenuItem(""&$Valeur31, $SubMenu3) $EnvoyerMess2Sub3 = GUICtrlCreateMenuItem(""&$Valeur32, $SubMenu3) $EnvoyerMess3Sub3 = GUICtrlCreateMenuItem(""&$Valeur33, $SubMenu3) $EnvoyerMess4Sub3 = GUICtrlCreateMenuItem(""&$Valeur34, $SubMenu3) $EnvoyerMess5Sub3 = GUICtrlCreateMenuItem(""&$Valeur35, $SubMenu3) $SubMenu4 = GUICtrlCreateMenu(""&$Valeur4, $Contextmenu) $EnvoyerMess1Sub4 = GUICtrlCreateMenuItem(""&$Valeur41, $SubMenu4) $EnvoyerMess2Sub4 = GUICtrlCreateMenuItem(""&$Valeur42, $SubMenu4) $EnvoyerMess3Sub4 = GUICtrlCreateMenuItem(""&$Valeur43, $SubMenu4) $EnvoyerMess4Sub4 = GUICtrlCreateMenuItem(""&$Valeur44, $SubMenu4) $EnvoyerMess5Sub4 = GUICtrlCreateMenuItem(""&$Valeur45, $SubMenu4) GUICtrlCreateMenuItem("", $contextmenu) ; separator $ConfigITEM = GUICtrlCreateMenuItem("Configuration", $contextmenu) EndFunc Func CallCustomContextMenu() Local $contextmenu, $msg Global $newsubmenu, $folderitem, $programitem, $fileitem, $otheritem Global $folderitem1, $folderitem2, $programitem1, $programitem2 Local $pos Global $GUI, $aTSR WinActivate ($GUI) ControlClick ( $GUI, "", "", "right", 1, $aTSR[0], 1) EndFunc Func _GetTotalScreenResolution() Local $aRet[2], $VirtualDesktopWidth, $VirtualDesktopHeight Global Const $SM_VIRTUALWIDTH = 78 Global Const $SM_VIRTUALHEIGHT = 79 $VirtualDesktopWidth = DllCall("user32.dll", "int", "GetSystemMetrics", "int", $SM_VIRTUALWIDTH) $aRet[0] = $VirtualDesktopWidth[0] $VirtualDesktopHeight = DllCall("user32.dll", "int", "GetSystemMetrics", "int", $SM_VIRTUALHEIGHT) $aRet[1] = $VirtualDesktopHeight[0] Return $aRet EndFunc Func WinGroupActive() AutoItSetOption("WinTitleMatchMode", 4) If WinActive("classname=ExploreWClass") _ Or WinActive("classname=CabinetWClass") _ Or WinActive("classname=#32770") _ Or WinActive("classname=DV2ControlHost") _ Or WinActive("classname=MMCMainFrame") _ Or WinActive("[CLASS:Progman; Title:Program Manager]") Then Return True Else Return False EndIf EndFunc  
By this way the script is very more clear about the purpose. When i use middle mouse click i got a context menu that apear. Then i can send the preconfigured message in the ini file that will alow me to send particular message without spending much time on it. 
First question : 
When i push middle click on a particular windows how to get back focus on it ??
plz dont make attention on the declared fonction that are unused i am gonna clean that at the end. 

Who could help me to convert this vbs to AuoIT?
on error resume next dim oCPAppletMgr 'Control Applet manager object. dim oClientAction 'Individual client action. dim oClientActions 'A collection of client actions. 'Get the Control Panel manager object. set oCPAppletMgr=CreateObject("CPApplet.CPAppletMgr") if err.number <> 0 then Wscript.echo "Couldn't create control panel application manager" WScript.Quit end if 'Get a collection of actions. set oClientActions=oCPAppletMgr.GetClientActions if err.number<>0 then wscript.echo "Couldn't get the client actions" set oCPAppletMgr=nothing WScript.Quit end if 'Display each client action name and perform it. For Each oClientAction In oClientActions if oClientAction.Name = "Request & Evaluate Machine Policy" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Software Metering Usage Report Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Updates Source Scan Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Request & Evaluate User Policy" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Hardware Inventory Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Software Inventory Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Application Global Evaluation Task" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Software Updates Assignments Evaluation Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Discovery Data Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "MSI Product Source Update Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if if oClientAction.Name = "Standard File Collection Cycle" then wscript.echo "Performing action " + oClientAction.Name oClientAction.PerformAction end if next set oClientActions=nothing set oCPAppletMgr=nothing  

Hi guys,
After i use that, all of thing is good and perfect,
Local $dData = InetRead("http://example.com/my.html",1) $my = BinaryToString(StringReplace($dData, "0A", "0D0A"), 4) but now how can i reload that after x time ?!
by this ( top script ) , i need to relunch the script to see modified,
now! how can i update data after X time !?
for example : 
in "my.html" we have number "3" , i try to change it to "5", now we need to relunch script to see "3" => "5",
how we can use that without relunch script.
thanks alot and sorry for my bad english & too long question.