cubi11 Posted July 2, 2010 Share Posted July 2, 2010 software to send mail using gmail account, and a flow to send messages. thank you Link to comment Share on other sites More sharing options...
happy2help Posted July 2, 2010 Share Posted July 2, 2010 Hi and Welcome! We are all willing to help you, but you must try to search the forums first, so we don't repeat ourselves over and over. A good search would be "send email from gmail" here is the code I use expandcollapse popup; ;################################## ; Include ;################################## #Include<file.au3> ;################################## ; Variables ;################################## $title = " n/a" $SmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED $FromName = "*****" ; name from who the email was sent $FromAddress = "***"; address from where the mail should come $ToAddress = "*****@gmail.com" ; destination address of the email - REQUIRED $Subject = "******" ; subject from the email - can be anything you want it to be $Body = "" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file you want to attach- leave blank if not needed $CcAddress = "****" ; address for cc - leave blank if not needed $BccAddress = ""; address for bcc - leave blank if not needed $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" $Username = "****@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED $Password = "****" ; password for the account used from where the mail gets sent - REQUIRED $IPPort=465 ; GMAIL port used for sending the mail $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS ;################################## ; Script ;################################## Global $oMyRet[2] Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc") ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF);### Debug Console If FileExists($S_Files2Attach[$x]) Then $objEmail.AddAttachment ($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True EndIf ;Update settings $objEmail.Configuration.Fields.Update ; Set email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail="" EndFunc ;==>_INetSmtpMailCom ; ; ; Com Error Handler Func MyErrFunc() $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1); something to check for when this function returns Return EndFunc ;==>MyErrFunc#Include<file.au3> Link to comment Share on other sites More sharing options...
getloader Posted January 3, 2015 Share Posted January 3, 2015 error: missing separator character before keyword. Link to comment Share on other sites More sharing options...
water Posted January 3, 2015 Share Posted January 3, 2015 Please show us the full error message in the SciTE output pane. My UDFs and Tutorials: Spoiler UDFs:Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - WikiExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example ScriptsOutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - WikiOutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - DownloadOutlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - WikiPowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - WikiTask Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki Standard UDFs:Excel - Example Scripts - WikiWord - Wiki Tutorials:ADO - WikiWebDriver - Wiki  Link to comment Share on other sites More sharing options...
BrewManNH Posted January 3, 2015 Share Posted January 3, 2015 error: missing separator character before keyword. Update your version of Au3Check to the latest beta found here to get rid of this "error" If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator Link to comment Share on other sites More sharing options...
water Posted January 3, 2015 Share Posted January 3, 2015 You could have found the solution yourself by searching the forum before posting the question My UDFs and Tutorials: Spoiler UDFs:Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - WikiExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example ScriptsOutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - WikiOutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - DownloadOutlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - WikiPowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - WikiTask Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki Standard UDFs:Excel - Example Scripts - WikiWord - Wiki Tutorials:ADO - WikiWebDriver - Wiki  Link to comment Share on other sites More sharing options...
Balmukundam Posted July 11, 2016 Share Posted July 11, 2016 I need to ask one question like in above code we mentioned mail id and attach file manually ! but let suppose i have to pic those value from excel sheet then what should we have to do ! I had tried many times but failed to get this , Can Anyone pleae let me suggest will be very Greatfull ... Thanks Link to comment Share on other sites More sharing options...
AutoBert Posted July 11, 2016 Share Posted July 11, 2016 Make your own thread and insert script (with anomynized credentials), showing what you tried. Mention also if script works without attached file(s). Link to comment Share on other sites More sharing options...
abrgen Posted September 9, 2016 Share Posted September 9, 2016 On 2/7/2010 at 4:27 PM, happy2help said: Hi and Welcome!  We are all willing to help you, but you must try to search the forums first, so we don't repeat ourselves over and over.  A good search would be "send email from gmail"  here is the code I use  expandcollapse popup; ;################################## ; Include ;################################## #Include<file.au3> ;################################## ; Variables ;################################## $title = " n/a" $SmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED $FromName = "*****" ; name from who the email was sent $FromAddress = "***"; address from where the mail should come $ToAddress = "*****@gmail.com" ; destination address of the email - REQUIRED $Subject = "******" ; subject from the email - can be anything you want it to be $Body = "" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file you want to attach- leave blank if not needed $CcAddress = "****" ; address for cc - leave blank if not needed $BccAddress = ""; address for bcc - leave blank if not needed $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" $Username = "****@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED $Password = "****" ; password for the account used from where the mail gets sent - REQUIRED $IPPort=465 ; GMAIL port used for sending the mail $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS ;################################## ; Script ;################################## Global $oMyRet[2] Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc") ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF);### Debug Console If FileExists($S_Files2Attach[$x]) Then $objEmail.AddAttachment ($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True EndIf ;Update settings $objEmail.Configuration.Fields.Update ; Set email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail="" EndFunc ;==>_INetSmtpMailCom ; ; ; Com Error Handler Func MyErrFunc() $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1); something to check for when this function returns Return EndFunc ;==>MyErrFunc#Include<file.au3> $objEmail.BodyPart.Charset = "iso-8859-15"  ; You need to add this line if you want to use the € symbol before to send  Thanks for your code, it was helpful. Link to comment Share on other sites More sharing options...
ur Posted November 23, 2016 Share Posted November 23, 2016 I am getting com error as below if I try to run above sample code. ### COM Error ! Number: 80020009 ScriptLine: 88 Description:The message could not be sent to the SMTP server. The transport error code was 0x80040217. The server response was not available  Link to comment Share on other sites More sharing options...
Developers Jos Posted November 23, 2016 Developers Share Posted November 23, 2016 It probably would help when you show the script you are using to check for issues. Jos SciTE4AutoIt3 Full installer Download page  - Beta files    Read before posting   How to post scriptsource   Forum etiquette Forum Rules  Live for the present, Dream of the future, Learn from the past. Link to comment Share on other sites More sharing options...
ur Posted November 23, 2016 Share Posted November 23, 2016 expandcollapse popup; ;################################## ; Include ;################################## #Include<file.au3> ;################################## ; Variables ;################################## $title = " n/a" $SmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED $FromName = "uday kiran" ; name from who the email was sent $FromAddress = "myuser@gmail.com"; address from where the mail should come $ToAddress = "ukreddy@gmail.com" ; destination address of the email - REQUIRED $Subject = "Testing" ; subject from the email - can be anything you want it to be $Body = "Hello sir..." ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file you want to attach- leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = ""; address for bcc - leave blank if not needed $Importance = "Normal" ; Send message priority: "High", "Normal", "Low" $Username = "myuser@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED $Password = "password" ; password for the account used from where the mail gets sent - REQUIRED $IPPort=465 ; GMAIL port used for sending the mail $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS ;################################## ; Script ;################################## Global $oMyRet[2] Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc") _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress,$Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, 465, 1) ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF);### Debug Console If FileExists($S_Files2Attach[$x]) Then $objEmail.AddAttachment ($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True EndIf ;Update settings $objEmail.Configuration.Fields.Update ; Set email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail="" EndFunc ;==>_INetSmtpMailCom ; ; ; Com Error Handler Func MyErrFunc() $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1); something to check for when this function returns Return EndFunc ;==>MyErrFunc#Include<file.au3> Â Link to comment Share on other sites More sharing options...
ur Posted November 23, 2016 Share Posted November 23, 2016 Even I tried,https://www.autoitscript.com/...bfunctions/_INetSmtpMail.htm But there is no password option here?How to send mail then? Link to comment Share on other sites More sharing options...
Developers Jos Posted November 23, 2016 Developers Share Posted November 23, 2016 I have tested with your script using my gmail information and it works fine, so script is correct. Is Gmail working at all from the computer you are testing from with an Email client? Jos SciTE4AutoIt3 Full installer Download page  - Beta files    Read before posting   How to post scriptsource   Forum etiquette Forum Rules  Live for the present, Dream of the future, Learn from the past. Link to comment Share on other sites More sharing options...
ur Posted January 18, 2017 Share Posted January 18, 2017 On 11/23/2016 at 11:02 PM, Jos said: I have tested with your script using my gmail information and it works fine, so script is correct. Is Gmail working at all from the computer you are testing from with an Email client? Jos This is working Jos, the problem is with gmail settings. For which I got an autogenerated mail from google to change it. "Access for less secure apps has been turned on" Link to comment Share on other sites More sharing options...
ur Posted February 9, 2017 Share Posted February 9, 2017 I am getting below error whenever I am trying to send a mail second time from the same au3 file. ANy suggestions?? Â --------------------------- sendmail error: 2 --------------------------- The message could not be sent to the SMTP server. The transport error code was 0x80040217. The server response was not available --------------------------- OKÂ Â --------------------------- Â Link to comment Share on other sites More sharing options...
Qwerty212 Posted February 9, 2017 Share Posted February 9, 2017 No idea about the last error. Have you turned on the "Less secure apps" permission on your gmail account?  Can you test this script to see if it works for you?  expandcollapse popup#include <File.au3> ; =============================================================================================================================== ; Variables for the _INetSmtpMailCom ; =============================================================================================================================== Global Enum _ $g__INetSmtpMailCom_ERROR_FileNotFound = 1, _ $g__INetSmtpMailCom_ERROR_Send, _ $g__INetSmtpMailCom_ERROR_ObjectCreation, _ $g__INetSmtpMailCom_ERROR_COUNTER Global Const $g__cdoSendUsingPickup = 1 ; Send message using the local SMTP service pickup directory. Global Const $g__cdoSendUsingPort = 2 ; Send the message using the network (SMTP over the network). Must use this to use Delivery Notification Global Const $g__cdoAnonymous = 0 ; Do not authenticate Global Const $g__cdoBasic = 1 ; basic (clear-text) authentication Global Const $g__cdoNTLM = 2 ; NTLM Global $gs_thoussep = "." Global $gs_decsep = "," Global $sFileOpenDialog = "" ; Delivery Status Notifications Global Const $g__cdoDSNDefault = 0 ; None Global Const $g__cdoDSNNever = 1 ; None Global Const $g__cdoDSNFailure = 2 ; Failure Global Const $g__cdoDSNSuccess = 4 ; Success Global Const $g__cdoDSNDelay = 8 ; Delay _Sendmail() Func _Sendmail() Local $sSmtpServer = "smtp.gmail.com" ; address for the smtp-server to use - REQUIRED Local $sFromName = "user" ; name from who the email was sent Local $sFromAddress = "youremail@gmail.com" ; address from where the mail should come Local $sToAddress = "mailreceiver@gmail.com" ; destination address of the email - REQUIRED Local $sSubject = "testing" ; subject from the email - can be anything you want it to be Local $sBody = "test" ; the messagebody from the mail - can be left blank but then you get a blank mail Local $sAttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed Local $sCcAddress = "" ; address for cc - leave blank if not needed Local $sBccAddress = "" ; address for bcc - leave blank if not needed Local $sImportance = "Normal" ; Send message priority: "High", "Normal", "Low" Local $sUsername = "youremail@gmail.com" ; username for the account used from where the mail gets sent - REQUIRED Local $sPassword = "xxxxxxx" ; password for the account used from where the mail gets sent - REQUIRED Local $iIPPort = 465 ; GMAIL port used for sending the mail Local $bSSL = True ; GMAIL enables/disables secure socket layer sending - set to True if using httpS Local $bIsHTMLBody = False Local $iDSNOptions = $g__cdoDSNDefault Local $rc = _INetSmtpMailCom($sSmtpServer, $sFromName, $sFromAddress, $sToAddress, $sSubject, $sBody, $sAttachFiles, $sCcAddress, $sBccAddress, $sImportance, $sUsername, $sPassword, $iIPPort, $bSSL, $bIsHTMLBody, $iDSNOptions) If @error Then MsgBox(0, "_INetSmtpMailCom(): Error sending message", _ "Error code: " & @error & @CRLF & @CRLF & _ "Error Hex Number: " & _INetSmtpMailCom_ErrHexNumber() & @CRLF & @CRLF & _ "Description: " & _INetSmtpMailCom_ErrDescription() & @CRLF & @CRLF & _ "Description (rc): " & $rc & @CRLF & @CRLF & _ "ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() _ ) ConsoleWrite("### COM Error ! Number: " & _INetSmtpMailCom_ErrHexNumber() & " ScriptLine: " & _INetSmtpMailCom_ErrScriptLine() & " Description:" & _INetSmtpMailCom_ErrDescription() & @LF) Else Dim $iMsgBoxAnswer $iMsgBoxAnswer = MsgBox(262208, "SUCCESS", ":-)", 5) EndIf EndFunc ;==>_Enviarmail #Region UDF Functions ; The UDF ; #FUNCTION# ==================================================================================================================== ; Name ..........: _INetSmtpMailCom ; Description ...: ; Syntax ........: _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress[, $s_Subject = ""[, $as_Body = ""[, ; $s_AttachFiles = ""[, $s_CcAddress = ""[, $s_BccAddress = ""[, $s_Importance = "Normal"[, $s_Username = ""[, ; $s_Password = ""[, $IPPort = 25[, $bSSL = False[, $bIsHTMLBody = False[, $iDSNOptions = $g__cdoDSNDefault]]]]]]]]]]]]) ; Parameters ....: $s_SmtpServer - A string value. ; $s_FromName - A string value. ; $s_FromAddress - A string value. ; $s_ToAddress - A string value. ; $s_Subject - [optional] A string value. Default is "". ; $s_Body - [optional] A string value. Default is "". ; $s_AttachFiles - [optional] A string value. Default is "". ; $s_CcAddress - [optional] A string value. Default is "". ; $s_BccAddress - [optional] A string value. Default is "". ; $s_Importance - [optional] A string value. Default is "Normal". ; $s_Username - [optional] A string value. Default is "". ; $s_Password - [optional] A string value. Default is "". ; $IPPort - [optional] An integer value. Default is 25. ; $bSSL - [optional] A binary value. Default is False. ; $bIsHTMLBody - [optional] A binary value. Default is False. ; $iDSNOptions - [optional] An integer value. Default is $g__cdoDSNDefault. ; Return values .: None ; Author ........: Jos ; Modified ......: mLipok ; Remarks .......: ; Related .......: http://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/ ; Link ..........: http://www.autoitscript.com/forum/topic/167292-smtp-mailer-udf/ ; Example .......: Yes ; =============================================================================================================================== Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $s_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $bSSL = False, $bIsHTMLBody = False, $iDSNOptions = $g__cdoDSNDefault) ; init Error Handler _INetSmtpMailCom_ErrObjInit() Local $objEmail = ObjCreate("CDO.Message") If Not IsObj($objEmail) Then Return SetError($g__INetSmtpMailCom_ERROR_ObjectCreation, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription()) ; Clear previous Err information _INetSmtpMailCom_ErrHexNumber(0) _INetSmtpMailCom_ErrDescription('') _INetSmtpMailCom_ErrScriptLine('') $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject ; Select whether or not the content is sent as plain text or HTM If $bIsHTMLBody Then $objEmail.Textbody = $s_Body & @CRLF Else $objEmail.HTMLBody = $s_Body EndIf ; Add Attachments If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) If FileExists($S_Files2Attach[$x]) Then ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF) $objEmail.AddAttachment($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) Return SetError($g__INetSmtpMailCom_ERROR_FileNotFound, 0, 0) EndIf Next EndIf ; Set Email Configuration $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = $g__cdoSendUsingPort $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 Then $IPPort = 25 $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = $g__cdoBasic $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = $bSSL ;Update Configuration Settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low" EndSwitch ; Set DSN options If $iDSNOptions <> $g__cdoDSNDefault And $iDSNOptions <> $g__cdoDSNNever Then $objEmail.DSNOptions = $iDSNOptions $objEmail.Fields.Item("urn:schemas:mailheader:disposition-notification-to") = $s_FromAddress ;~ $objEmail.Fields.Item("urn:schemas:mailheader:return-receipt-to") = $s_FromAddress EndIf ; Update Importance and Options fields $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then _INetSmtpMailCom_ErrObjCleanUp() Return SetError($g__INetSmtpMailCom_ERROR_Send, Dec(_INetSmtpMailCom_ErrHexNumber()), _INetSmtpMailCom_ErrDescription()) EndIf ; CleanUp $objEmail = "" _INetSmtpMailCom_ErrObjCleanUp() EndFunc ;==>_INetSmtpMailCom ; ; Com Error Handler Func _INetSmtpMailCom_ErrObjInit($bParam = Default) Local Static $oINetSmtpMailCom_Error = Default If $bParam == 'CleanUp' And $oINetSmtpMailCom_Error <> Default Then $oINetSmtpMailCom_Error = '' Return $oINetSmtpMailCom_Error EndIf If $oINetSmtpMailCom_Error = Default Then $oINetSmtpMailCom_Error = ObjEvent("AutoIt.Error", "_INetSmtpMailCom_ErrFunc") EndIf Return $oINetSmtpMailCom_Error EndFunc ;==>_INetSmtpMailCom_ErrObjInit Func _INetSmtpMailCom_ErrObjCleanUp() _INetSmtpMailCom_ErrObjInit('CleanUp') EndFunc ;==>_INetSmtpMailCom_ErrObjCleanUp Func _INetSmtpMailCom_ErrHexNumber($vData = Default) Local Static $vReturn = 0 If $vData <> Default Then $vReturn = $vData Return $vReturn EndFunc ;==>_INetSmtpMailCom_ErrHexNumber Func _INetSmtpMailCom_ErrDescription($sData = Default) Local Static $sReturn = '' If $sData <> Default Then $sReturn = $sData Return $sReturn EndFunc ;==>_INetSmtpMailCom_ErrDescription Func _INetSmtpMailCom_ErrScriptLine($iData = Default) Local Static $iReturn = '' If $iData <> Default Then $iReturn = $iData Return $iReturn EndFunc ;==>_INetSmtpMailCom_ErrScriptLine Func _INetSmtpMailCom_ErrFunc() _INetSmtpMailCom_ErrObjInit() _INetSmtpMailCom_ErrHexNumber(Hex(_INetSmtpMailCom_ErrObjInit().number, 8)) _INetSmtpMailCom_ErrDescription(StringStripWS(_INetSmtpMailCom_ErrObjInit().description, 3)) _INetSmtpMailCom_ErrScriptLine(_INetSmtpMailCom_ErrObjInit().ScriptLine) SetError(1) ; something to check for when this function returns Return EndFunc ;==>_INetSmtpMailCom_ErrFunc #EndRegion UDF Functions  Greets from Barcelona Link to comment Share on other sites More sharing options...
ur Posted February 9, 2017 Share Posted February 9, 2017 Yeah I have turned on less secure apps.And the script is failing for second mail Link to comment Share on other sites More sharing options...
Developers Jos Posted February 9, 2017 Developers Share Posted February 9, 2017 3 hours ago, ur said: And the script is failing for second mail Which means "what exactly"? First mail works and second doesn't? Jos  SciTE4AutoIt3 Full installer Download page  - Beta files    Read before posting   How to post scriptsource   Forum etiquette Forum Rules  Live for the present, Dream of the future, Learn from the past. Link to comment Share on other sites More sharing options...
ur Posted February 13, 2017 Share Posted February 13, 2017 Yes @Jos . It is working for first mail and for second mail in the same program it is failing.  Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now