Jump to content

Recommended Posts

Hello i have problem with function PixelGetColor. On my computer it working fine but in some cases it not working.

And Im clicking on the active window on red color and it give me the same color still. But in other computers when clicking on the same color red it gives other values and returned color in MsgBox is not red.

Dont know is it a real main thing what causing problem but,

I noticed that problem was on one windows 10.

I have windows 8 and working well. On other windows 10 works well to

Maybe it is caused by windows aero or something like that

How to deal with it?

There is a code

HotKeySet("{PAUSE}", "MouseCord")


While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
WEnd



Func MouseCord()

    Global $MousePos = MouseGetPos()
    $clickedColor = PixelGetColor($MousePos[0], $MousePos[1])
    MsgBox(0, "Done", $clickedColor)


EndFunc

 

 

Edited by Miliardsto

Share this post


Link to post
Share on other sites

If you take the position of the mousepointer and check for the pixel colour, isn't it than likely that it returns the colour of the mouspointer in stead of the color of the original pixel?

Jos

Share this post


Link to post
Share on other sites

Just run the code below. if u click on white color it returns FFFFF if u click on blue it returns blue in rgb, red click returns nearing to FF0000.

As I said in these computers where this function not working it returns always other color if u clicking the same color.

 

 

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <Timers.au3>
#include <MsgBoxConstants.au3>
#include <TabConstants.au3>
#include <ColorConstants.au3>

HotKeySet("{PAUSE}", "MouseCord")


While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
WEnd



Func MouseCord()

    Global $MousePos = MouseGetPos()
    $clickedColor = Hex(PixelGetColor($MousePos[0], $MousePos[1]))
    MsgBox(0, "Done", $clickedColor)


EndFunc

 

Share this post


Link to post
Share on other sites
11 hours ago, Miliardsto said:

 

for what reason? what u want see. 10 screenshots when i click on the same position and it gives differents colors?

 

Yes! There IS a reason, and I want to see it! 

You asked for help and support us with...nothing. Waste our time is not very solution-oriented...

Share this post


Link to post
Share on other sites

Jos is correct it is returning the pixel at the very tip of your mouse pointer.

problem solved here.

 

Edited by Nitrolord

Share this post


Link to post
Share on other sites

lol . it not solve the problem. its not problem in 3 pixels right or down. 

 

cLICK ON THE same color - still same color - gives different colors

Share this post


Link to post
Share on other sites

and Miliardsto refuses to give the name of the application. So, I have no choice but to assume it is for a game and that is against forum rules. Time to put up or stop. The name of the application you are wanting to automate please.

Edited by Bert

Share this post


Link to post
Share on other sites
52 minutes ago, Miliardsto said:

lol . it not solve the problem. its not problem in 3 pixels right or down. 

 

cLICK ON THE same color - still same color - gives different colors

I will do a *click* for this threat as it seems all important information is exchanged that you are willing to share.

Jos

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By argumentum
      ..I'm coding the High Contrast theme editor and using the _ChooseColor() I wandered why it does not keep the the custom colors I've added.
      Found that adding a static declaration would do it. But why stop there. Why not keep going, So I put this together that is non code braking ( backwards compatible ), to replace the one in <Misc.au3>
      _ChooseColor_mod_Example() Func _ChooseColor_mod_Example() Local $aCustColors[17] $aCustColors[1] = 0xFF0000 $aCustColors[16] = 0x0000FF $aCustColors = _ChooseColor_mod(2, "0x00ff00", 2, 0, $aCustColors) ConsoleWrite(@CRLF & $aCustColors[0] & @CRLF & @CRLF) ConsoleWrite(@CRLF & _ChooseColor_mod(2, $aCustColors[0], 2, 0, $aCustColors)[0] & @CRLF & @CRLF) ConsoleWrite(@CRLF & _ChooseColor_mod(2, "0x00ff00", 2) & @CRLF & @CRLF) ; just as default behaviour ConsoleWrite(@CRLF & _ChooseColor_mod(2, "0x00ff00", 2, 0, 'reset as is neither "Default" nor "Array[17]"') & @CRLF & @CRLF) ; just as default behaviour EndFunc ;==>_ChooseColor_mod_Example ; #FUNCTION# ==================================================================================================================== ; Name ..........: _ChooseColor_mod ; Description ...: ; Syntax ........: _ChooseColor_mod([$iReturnType = 0[, $iColorRef = 0[, $iRefType = 0[, $hWndOwnder = 0[, $vCustColors = Default]]]]]) ; Parameters ....: $iReturnType - [optional] an integer value. Default is 0. See remarks for values. ; $iColorRef - [optional] an integer value. Default is 0. ; $iRefType - [optional] an integer value. Default is 0. See remarks for values. ; $hWndOwnder - [optional] a handle to the parent window. Default is 0. ; $vCustColors - [optional] an array of colors to show as custom values. See remarks for values. ; Return values .: Success - Hex value of the selected color ; Failure - $vCustomColors is returned if set, otherwise, -1 is returned. Also sets @error: ; | -2 - User initialized $tagCustcolors via $vCustColors. ; | -3 - User canceled or invalid dll struct. ; | -4 - Invalid $iReturnType value. ; | Other - Error returned from Dll call. ; Author ........: Gary Frost (gafrost) ; Modified ......: argumentum ; Remarks .......: $iReturnType can be 0 (RGB COLORREF), 1 (Hex BGR), or 2 (Hex RGB). ; $iRefType can be 0 (ColorRef), 1 (BGR Hex), or 2 (RGB Hex). ; $vCustColors is a zero based array[17] where: ; index 0 hold the color returned by the function. ; index 1 to 16 are the colors to use in Custom colors in RGB. ; One can pass the array with array[0] = -2 to initialize the custom colors without loading the interface. ; When $vCustColors is used, it returns the modified array. ( not the color as integer ). ; Anything other than Default or a proper array, will clear $tagCustcolors ( holder of the custom colors ). ; When $vCustColors is omited or Default, $tagCustcolors is kept ( hence, no need for the array to keep custom colors ). ; Related .......: Same Func from <Misc.au3> ; Link ..........: https://www.autoitscript.com/forum/topic/200985-_choosecolor-but-better/ ; Example .......: YES ; =============================================================================================================================== Func _ChooseColor_mod($iReturnType = 0, $iColorRef = 0, $iRefType = 0, $hWndOwnder = 0, $vCustColors = Default) ; basic code from Misc.au3 ; https://www.autoitscript.com/forum/topic/200985-_choosecolor-but-better/ ; added here for independance of #include <Misc.au3> Local Static $tagCHOOSECOLOR = "dword Size;hwnd hWndOwnder;handle hInstance;dword rgbResult;ptr CustColors;dword Flags;lparam lCustData;" & _ "ptr lpfnHook;ptr lpTemplateName" Local Static $__MISCCONSTANT_CC_ANYCOLOR = 0x0100 Local Static $__MISCCONSTANT_CC_FULLOPEN = 0x0002 Local Static $__MISCCONSTANT_CC_RGBINIT = 0x0001 ; added here for independance of #include <Misc.au3> Local $vReturn, $bCustColors = False, $tagCustcolors = "dword[16]" Local $tChoose = DllStructCreate($tagCHOOSECOLOR) Local Static $tCc = DllStructCreate($tagCustcolors) ; added Static (mod.), to keep $tagCustcolors changes by user when called again. If $vCustColors == Default Then ; nothing ElseIf UBound($vCustColors) = 17 Then $bCustColors = True For $n = 1 To 16 DllStructSetData($tCc, 1, $vCustColors[$n], $n) Next Else $tCc = DllStructCreate($tagCustcolors) ; reset, just in case you'd want to have it default again EndIf If $iRefType = 1 Then ; BGR hex color to colorref $iColorRef = Int($iColorRef) ElseIf $iRefType = 2 Then ; RGB hex color to colorref $iColorRef = Hex(String($iColorRef), 6) $iColorRef = '0x' & StringMid($iColorRef, 5, 2) & StringMid($iColorRef, 3, 2) & StringMid($iColorRef, 1, 2) EndIf DllStructSetData($tChoose, "Size", DllStructGetSize($tChoose)) DllStructSetData($tChoose, "hWndOwnder", $hWndOwnder) DllStructSetData($tChoose, "rgbResult", $iColorRef) DllStructSetData($tChoose, "CustColors", DllStructGetPtr($tCc)) DllStructSetData($tChoose, "Flags", BitOR($__MISCCONSTANT_CC_ANYCOLOR, $__MISCCONSTANT_CC_FULLOPEN, $__MISCCONSTANT_CC_RGBINIT)) Local $aResult = DllCall("comdlg32.dll", "bool", "ChooseColor", "struct*", $tChoose) If @error Then If Not $bCustColors Then Return SetError(@error, @extended, -1) Else $vCustColors[0] = -1 Return SetError(@error, @extended, $vCustColors) EndIf EndIf If $bCustColors Then ; this here is better than at the end, For $n = 1 To 16 ; that way you'll get the custom colors anyway. $vCustColors[$n] = DllStructGetData($tCc, 1, $n) Next If $vCustColors[0] = -2 Then Return $vCustColors EndIf If $aResult[0] = 0 Then ; Return SetError(-3, -3, -1) ; user selected cancel or struct settings incorrect If Not $bCustColors Then Return SetError(-3, -3, -1) Else $vCustColors[0] = -1 Return SetError(-3, -3, $vCustColors) EndIf EndIf Local $sColor_picked = DllStructGetData($tChoose, "rgbResult") If $iReturnType = 1 Then ; return Hex BGR Color $vReturn = '0x' & Hex(String($sColor_picked), 6) ElseIf $iReturnType = 2 Then ; return Hex RGB Color $sColor_picked = Hex(String($sColor_picked), 6) $vReturn = '0x' & StringMid($sColor_picked, 5, 2) & StringMid($sColor_picked, 3, 2) & StringMid($sColor_picked, 1, 2) ElseIf $iReturnType = 0 Then ; return RGB COLORREF $vReturn = $sColor_picked Else $vReturn = -1 SetError(-4, -4) EndIf If Not $bCustColors Then Return $vReturn $vCustColors[0] = $vReturn Return $vCustColors EndFunc ;==>_ChooseColor_mod Hopefully will replace the default one in the next release 
    • By DannyJ
      Hello Forum, 
      I have one special Combo-box [with BitOR($CBS_DROPDOWNLIST, $GUI_SS_DEFAULT_COMBO, $CBS_SIMPLE) ] and if I press one button I want to change the Combo-box's background color, and after I press Button B I want to change it to the basic settings and it not works.
      I wanna do this with one combo-box.
      I have already tried several methods and I tried  GUICtrlComboSetColors that I have found on this forum.
      (But this methods works perfectly with Cobo boxes that don't have BitOR($CBS_DROPDOWNLIST, $GUI_SS_DEFAULT_COMBO, $CBS_SIMPLE). 
      Here is the example code
      #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form= ;$CBS_DROPDOWNLIST ;$GUI_SS_DEFAULT_COMBO $Form1 = GUICreate("Form1", 504, 249, 252, 227) $Combo1 = GUICtrlCreateCombo("", 136, 24, 193, 25,BitOR($CBS_DROPDOWNLIST, $GUI_SS_DEFAULT_COMBO, $CBS_SIMPLE)) ; I want to change this special combo's background color if I press button 1 $Button1 = GUICtrlCreateButton("Button1", 112, 96, 75, 25) $Button2 = GUICtrlCreateButton("Button2", 264, 96, 75, 25) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### GUICtrlSetData($Combo1," " & "|" & "apple" & "|" & "banana" & "|" & "cherry" ," ") While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 GUICtrlSetBkColor($Combo1,0x0078D7) Case $Button2 ;Makes the original bc color GUICtrlSetBkColor($Combo1,0xFFFFFF) EndSwitch WEnd  
      Thanks you in advance your help
    • By nacerbaaziz
      hello sirs, please i created a tool witch get the focused control in a window and play a audio file linked with this controls
      e.g buttons, checkBoxes, radios, comboboxes, and others
      i know that their is a function that give us the control focus but it return the classNN
      i want to get the class name to use it with a switch and
      because their are more than class e.g button tbutton timagebutton tnewButton...
      please can any one help me to get the class name not the classnn
      thanks in advance
    • By user4157124
      ConsoleWrite('>Message here.' & @CRLF) outputs colored text (per + > - ! characters).
      ConsoleWrite('warning' & @TAB & '38' & @TAB & 'more text ...' & @CRLF) enables jump to line 38 on doubleclick.

      Using "jump to line" format, only red and pink text coloring seems possible (simply prefixing color directives to output-text disables jump to line functionality). Is it possible to combine the two (define custom color while keeping "jump to line" functionality)?
    • By Miliardsto
      I have the following code. You can see there are $color_normal and $color_trans
      In my case normal is too dark . And color trans is to much violet.
      If you run it you will see how its looks. I want gui with listView have the same color like taskbar in windows 10.
      How to achieve that?
       
       
      #include <Date.au3> #include <MsgBoxConstants.au3> #include <GuiListBox.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> HotKeySet("{ESC}", "Terminate") $color_normal = "0x" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 24), 6) $color_trans = "0x" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 16), 6) $trans = RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "EnableTransparency") ConsoleWrite("Transpart = " & $trans & @CRLF) ConsoleWrite("Color normal = " & $color_normal & @CRLF) ConsoleWrite("Color trans = " & $color_trans & @CRLF) ConsoleWrite(_Get_taskbar_color()); It return AARRGGBB $taskbarColor = _Get_taskbar_color() Global $gui = GUICreate("Test", 150, 58,@DesktopWidth-300,@DesktopHeight-58,$WS_POPUP,BitOR($WS_EX_TOPMOST, $WS_EX_TOOLWINDOW)) Global $idListview = GUICtrlCreateListView("", 0, 0, 150, 58,BitOR($LBS_NOTIFY,$LBS_SORT), 0) ;_GuiCtrlMakeTrans(-1,100) ; Add column _GUICtrlListView_AddColumn($idListview, "Msgs", 100) GUICtrlSetFont(-1, 7, 400, 0, "Segoe UI") GUICtrlSetColor(-1, 0x470C4F) GUICtrlSetBkColor($idListview, 0x310638) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Func Terminate() Exit EndFunc Func _Get_taskbar_color() If RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "ColorPrevalence") Then If RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "EnableTransparency") Then Return "0xD9" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 16), 6) Else Return "0xFF" & StringLeft(StringRight(RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Accent", "AccentPalette"), 24), 6) EndIf Else If RegRead("HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize", "EnableTransparency") Then Return "0xD9000000" Else Return "0xFF000000" EndIf EndIf EndFunc  
×
×
  • Create New...