Jump to content
Ascer

[UDF] Google oAuth 2.0 with AutoIt.

Recommended Posts

This is wat i was looking for 

it would be great if you can have this tutorial in english language(Images Part)

and thanks For udf

I Havnt Tried this!

But will do it soon

Share this post


Link to post
Share on other sites
On 9/29/2018 at 8:18 PM, PaulC said:

oAuth2GetAccessToken not work

It actually does; have used this UDF successfully, works as expected.

Post your code so we can help you debug...

Share this post


Link to post
Share on other sites

I want an example to interact with gcp compute (insert/check status/ get info instances), can you help me?

Edited by PaulC

Share this post


Link to post
Share on other sites
On 1/10/2018 at 2:37 AM, dmob said:

It actually does; have used this UDF successfully, works as expected.

Post your code so we can help you debug...

Can you help me an examples about GCE (google compute engine) instance?

Share this post


Link to post
Share on other sites
On 10/2/2018 at 5:50 PM, PaulC said:

Can you help me an examples about GCE (google compute engine) instance?

I use this UDF is for authentication to Google services. Please refer to Google documentation for examples for the particular service you require. 

Share this post


Link to post
Share on other sites

i'm receiving this error: "+++ Line: 93, Func: aAuthGetAccessToken() -> Error durning reading $oHttp.ResponseText. Google must changed *json respond for this request."

Edited by x_bennY

Share this post


Link to post
Share on other sites
10 hours ago, x_bennY said:

i'm receiving this error: "+++ Line: 93, Func: aAuthGetAccessToken() -> Error durning reading $oHttp.ResponseText. Google must changed *json respond for this request."

I get the same error, but you should see all info is outputed in Console after that error :) So baiscly it works it just cant convert json format to array :)

Share this post


Link to post
Share on other sites
Google must changed *json respond for this request.

yes and no. The spaces is the problem. patch this:

Func _JsonValue($sString, $sStart, $sEnd, $iMode = 0, $bCase = False)
    $sString = StringStripWS($sString,8)
    $sStart = StringStripWS($sStart,8)
    $sEnd = StringStripWS($sEnd,8)

and that should take care of it.

Edited by argumentum

Share this post


Link to post
Share on other sites

that problem is now fixed but i'm getting some kind of transport message error and the email is not beeing sent, i don't know why, i already have tried all ports/ssl combinations and i just can't get it working.

Share this post


Link to post
Share on other sites
On 17/11/2018 at 6:13 PM, argumentum said:

Then you get some kind of answer    =P

( be explicit )

I'm using @Ascer's code with the above tweak without problems.

mysteriously that message disappeared, but i can't get it working, it says that the message has been sent but it's not, this is the console output:

Message Sent Sucessfully!
MessageId: 
ThreadId: 
Sent message labels_ids:

image.png.0f3cf0c2a77cddc3e1ced7ea005c7192.png

 

 

Problem solved!

Several possible reasons:
1) Your trial period could have expired (if you use one). Check your status at admin.google.com
2) There is no email address that you use in FROM field created in your G Suite. So just create one.
3) Your email address is not a Gmail account. It is possible to be a Google Account but not a Gmail account (for example if you use the account for YouTube but have never enabled Gmail).
4) You may need to enable the Gmail feature or Gmail API access in your G Suite.

Edited by x_bennY

Share this post


Link to post
Share on other sites

Does this still work? I tried getting an access code, but executing this code doesn't give me an URL with a code=

#include <oAuth.au3>

Local $sClientId = "167204758184-vpeues0uk6b0g4jrnv0ipq5fapoig2v8.apps.googleusercontent.com" 
Local $sRedirectUri = "http://localhost"

oAuth2GetAuthorizationCode($sClientId, $sRedirectUri)

(of course I changed it with my own ClientId).

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By t0nZ
      I was in a hurry to convert 200+ address book from Google Contacts (G Suite, contacts exported in .CSV with Google Takeout, but the contact format is the same for every Google Gmail account)  to Outlook contacts, so I developed this quick and very dirty script.
      Starting from a .CSV exported from Google, you can run the script and you have the contacts ported directly (no outlook import) on the Outlook Address book.
      In my experience, the fields of Google contacts are not fixed in number  and maybe also in position, so I made the choice  to import only certain fields to Outlook, scanning every line.
      These fields, exact google names:
              "Given Name"  
              "Family Name"  
              "E-mail 1 - Value"  
              "E-mail 2 - Value"  
              "Phone 1 - Value"  
              "Phone 2 - Value"  
              "Website 1 - Value" 
              "Notes"  
              "Name"  
              "Address 1 - Formatted"  
      Also the lines of google contacts can be weird as CR and LF are not "regular".
      I include my code, (worked with no errors on a lot of conversions) and also a very small fake adress book with examples of problems I encountered and resolved.
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=Icone\Win98-ico\script_file_teal.ico #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ;GOA2OAB ;G.oogle A.ddress B.ook 2 (to) O.utlook A.ddress B.ook ;(C) NSC 2019 ; convert a google (takeout) address book to an Outlook Address Book #include <File.au3> #include <Array.au3> #include <_Gollog.au3> #include <MsgBoxConstants.au3> #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <String.au3> #include <Math.au3> ; ***************************************************************************** #include <OutlookEX.au3> ; super perla pearl outlook create contacts !!!!! ; ***************************************************************************** Global $oItem Global $oOutlook = _OL_Open() If @error <> 0 Then MsgBox(16, "OutlookEX UDF", "Error creating a connection to Outlook. @error = " & @error & ", @extended = " & @extended) ; ***************************************************************************** Global $ver = "V.0.8192", $tempdir = "c:\GAB2OAB_temp", $File2convert, $aRetArray, $workfile = $tempdir & "\work-GAB2OAB.csv", $workfile2 = $tempdir & "\WORK2-gab2oab.csv", $FINALab = $tempdir & "\NEW-ab.csv", $A3clean[0], $A4clean[0], $A5clean[0] ; Gollog Autogenerated Gui $mygui = "G.oogle A.ddress B.ook 2 (to) O.utlook A.ddress B.ook " & $ver & " NSC 2019" gollog_ini($mygui, 600, 200, 50, 50, "0x0033cc", "0xA8D9BD", "courier", 8, 600, @ScriptDir & "\GAB2OAB_log.txt") ; initialization with colors and font choice, more options see the UDF Gollog(">>>>>>>> GAB2OAB " & $ver) $File2convert = FileOpenDialog("Select Google Address Book File", @DesktopDir & "\", "CSV (*.csv)", BitOR($FD_FILEMUSTEXIST, $FD_MULTISELECT)) Gollog("selected " & $File2convert) If Not FileExists($tempdir) Then Gollog("creating " & $tempdir) DirCreate($tempdir) EndIf If FileExists($workfile) Then Gollog("deleting " & $workfile) FileDelete($workfile) EndIf If FileExists($workfile2) Then Gollog("deleting " & $workfile2) FileDelete($workfile2) EndIf If FileExists($FINALab) Then Gollog("deleting " & $FINALab) FileDelete($FINALab) EndIf cleanfile() readfile() cleanfile2() readfile2() write2Outlook() Exit Func write2Outlook() Gollog("---> Assigning Fields...") Sleep(300) Local $FirstName = 4 ; initialize with Yomi name - always empty in tested companies, low class workaround Local $LastName = 4 Local $Email1Address = 4 Local $Email2Address = 4 Local $MobileTelephoneNumber = 4 Local $OtherTelephoneNumber = 4 Local $Webpage = 4 Local $Body = 4 Local $Fullname = 4 Local $BusinessAddress = 4 For $z = 0 To UBound($A5clean, 2) - 1 ;If $A5clean[2][$z] = "Additional Name" Then $MiddleName = $z ; limit @ 10 If $A5clean[1][$z] = "Given Name" Then $FirstName = $z If $A5clean[1][$z] = "Family Name" Then $LastName = $z If $A5clean[1][$z] = "E-mail 1 - Value" Then $Email1Address = $z If $A5clean[1][$z] = "E-mail 2 - Value" Then $Email2Address = $z If $A5clean[1][$z] = "Phone 1 - Value" Then $MobileTelephoneNumber = $z If $A5clean[1][$z] = "Phone 2 - Value" Then $OtherTelephoneNumber = $z If $A5clean[1][$z] = "Website 1 - Value" Then $Webpage = $z If $A5clean[1][$z] = "Notes" Then $Body = $z If $A5clean[1][$z] = "Name" Then $Fullname = $z If $A5clean[1][$z] = "Address 1 - Formatted" Then $BusinessAddress = $z Next Gollog("Fields Found !") For $i = 2 To UBound($A5clean, 1) - 1 Gollog("Contact 2 Outlook line " & $i) ;Gollog($A5clean[$i][1]) ; Create a contact with first- and lastname ; ***************************************************************************** $oItem = _OL_ItemCreate($oOutlook, $olContactItem, "", "", "FullName=" & $A5clean[$i][$Fullname], "BusinessAddress=" & $A5clean[$i][$BusinessAddress], "FirstName=" & $A5clean[$i][$FirstName], "LastName=" & $A5clean[$i][$LastName], "Email1Address=" & $A5clean[$i][$Email1Address], "Email2Address=" & $A5clean[$i][$Email2Address], "WebPage=" & $A5clean[$i][$Webpage], "MobileTelephoneNumber=" & $A5clean[$i][$MobileTelephoneNumber], "OtherTelephoneNumber=" & $A5clean[$i][$OtherTelephoneNumber], "Body=" & $A5clean[$i][$Body]) If @error <> 0 Then Exit MsgBox(16, "OutlookEX UDF: _OL_ItemCreate ", "Error creating a contact'. @error = " & @error & ", @extended = " & @extended) ; Add a picture to the contact ;$oItem.AddPicture(@ScriptDir & "\The_Outlook.jpg") $oItem.Save() ; ***************************************************************************** Next MsgBox(64, "OutlookEX UDF: the magic was made!", "All contacts successfully created ") _OL_Close($oOutlook) ; close the connection to Outlook EndFunc ;==>write2Outlook Func cleanfile() Gollog('start check for unwanted LF... / final rogue "') Sleep(300) Local $A2Clean = FileReadToArray($File2convert) ;_ArrayDisplay($A2Clean, "original file", Default, 8) Local $dimLIST = UBound($A2Clean) - 1 Local $string2write = "" Local $Astring1 = "" Local $Astring2 = "" Local $salvaAstring1 = "" Local $openLF = 0 ; we are between "LF" across lines For $i = 0 To $dimLIST Gollog('workin on line ' & $i) ;Gollog($A2Clean[$i]) $Astring1 = StringToASCIIArray($A2Clean[$i]) ;_ArrayDisplay($Astring1) Local $DimAstring1 = UBound($Astring1) - 1 If $openLF = 1 Then ;check new line if start with " $Astring2 = StringToASCIIArray($A2Clean[$i]) If $Astring2[0] = "34" Then ; gollog('found initial " ') $openLF = 2 Else Gollog('error new line not starting with "') MsgBox(48, "error", 'error new line not starting with "') EndIf EndIf If $Astring1[$DimAstring1] = "34" Then ; gollog('First line -> Found final "') If $openLF <> 0 Then $salvaAstring1 = $salvaAstring1 & $A2Clean[$i] Else $salvaAstring1 = $A2Clean[$i] EndIf Else _ArrayAdd($A3clean, $salvaAstring1 & $A2Clean[$i]) ;Gollog("adding to cleaned array state:" & $openLF) $openLF = 0 $salvaAstring1 = "" EndIf Next Gollog('end clean from rogue "') ;_ArrayDisplay($A3clean, 'cleaned from rogue "') ;___________________________________P-PP-PP,P------------------------------------------------- Gollog('Start joining lines based on ODD " ') Sleep(300) ;_MathCheckDiv ( $iNum1 [, $iNum2 = 2] ) pari e dispari perla pearl Local $hFileOpen = FileOpen($workfile2, $FO_APPEND) If $hFileOpen = -1 Then MsgBox($MB_SYSTEMMODAL, "", "An error occurred whilst writing the file.") Return False EndIf Local $dimLIST = UBound($A3clean) - 1 Local $Astring1 = "" Local $Astring2 = "" Local $dimSTRING = "" Local $AapiciINriga Local $numeroapiciINriga = 0 Local $sommaNumeroapiciINrighe = 0 Local $salvaAstring1 = "" Local $dispari = 0 For $i = 0 To $dimLIST Gollog("workin' on line " & $i) $Astring1 = StringToASCIIArray($A3clean[$i]) ;_ArrayDisplay($Astring1) ;Gollog($A3clean[$i]) $AapiciINriga = _ArrayFindAll($Astring1, '34') If $AapiciINriga <> -1 Then $numeroapiciINriga = UBound($AapiciINriga) ; Gollog("N° " & $numeroapiciINriga & " apici in riga " & $i) $sommaNumeroapiciINrighe += $numeroapiciINriga If _MathCheckDiv($sommaNumeroapiciINrighe) = 1 Then $salvaAstring1 = $salvaAstring1 & $A3clean[$i] $dispari = 1 Else Local $towrite = $salvaAstring1 & $A3clean[$i] ; gollog("scrivo " & $towrite) FileWriteLine($hFileOpen, $towrite) $salvaAstring1 = "" $sommaNumeroapiciINrighe = 0 $dispari = 0 EndIf Else ; Gollog("zero apici in riga " & $i) If $dispari = 1 Then ;linea vuota o senza apici ma " aperte dispari $salvaAstring1 = $salvaAstring1 & $A3clean[$i] Else Local $towrite = $salvaAstring1 & $A3clean[$i] ; gollog("scrivo " & $towrite) FileWriteLine($hFileOpen, $towrite) $salvaAstring1 = "" $sommaNumeroapiciINrighe = 0 $dispari = 0 EndIf EndIf Next Gollog('END joined lines based on ODD "') ;_ArrayDisplay($A4clean, 'joined lines based on ODD "') FileClose($hFileOpen) EndFunc ;==>cleanfile Func readfile() gollog("reading work file and creating multiD array") Sleep(300) $A4clean = FileReadToArray($workfile2) If @error = 1 Or @error = 2 Then gollog("error reading work2 file " & @error) Else ; _ArrayDisplay($A4clean, "cleaned 1", Default, 8) EndIf EndFunc ;==>readfile Func cleanfile2() Local $dimLIST = UBound($A4clean) - 1 Local $Astring1 = "" Local $conta = 0 Local $salvaconta = 0 Local $dimSTRING = "" $salvalinea = "" Local $standardNumeroVirgole = 0 Local $hFileOpen = FileOpen($FINALab, $FO_APPEND) If $hFileOpen = -1 Then MsgBox($MB_SYSTEMMODAL, "", "An error occurred whilst writing the file.") Return False EndIf Gollog('Checkin , number') For $i = 0 To $dimLIST ;Gollog('workin on line ' & $i) $Astring1 = StringToASCIIArray($A4clean[$i]) ;_ArrayDisplay($Astring1) $dimSTRING = UBound($Astring1) - 1 For $y = 0 To $dimSTRING If $Astring1[$y] = "44" Then ; secondo step , $conta += 1 EndIf Next If $i = 0 Then $standardNumeroVirgole = $conta gollog("----------numero virgole -> " & $standardNumeroVirgole) EndIf If $conta = $standardNumeroVirgole Then FileWriteLine($hFileOpen, $A4clean[$i]) EndIf If $conta > $standardNumeroVirgole Then Gollog('>>> Line ' & $i & ' Virgole' & $conta) $toprecise = $A4clean[$i] $tofinal = '' While StringInStr($toprecise, '"') <> 0 $tofinal = preciseremoval($toprecise) ;super smart $toprecise = $tofinal WEnd FileWriteLine($hFileOpen, $toprecise) EndIf If $conta < $standardNumeroVirgole Then Gollog('<<< Line ' & $i & ' Virgole' & $conta) $salvalinea = $salvalinea & $A4clean[$i] $salvaconta += $conta If $salvaconta = $standardNumeroVirgole Then $salvaconta = 0 FileWriteLine($hFileOpen, $salvalinea) $salvalinea = 0 EndIf EndIf $conta = 0 Next FileClose($hFileOpen) EndFunc ;==>cleanfile2 Func writeWORKfile2() Gollog("writing work file") If _FileWriteFromArray($workfile, $A4clean) <> 1 Then gollog("error writing work file " & @error) EndIf EndFunc ;==>writeWORKfile2 Func readfile2() gollog("reading work file and creating multiD array") If _FileReadToArray($FINALab, $A5clean, Default, ",") = 0 Then MsgBox(48, "errore", @error) EndIf ;_ArrayDisplay($A5clean, "cleaned 2", Default, 8) EndFunc ;==>readfile2 Func preciseremoval($Pclean) ; llllllllllllllllllllllllll ---- pass 1 for ",," $Astring1 = StringToASCIIArray($Pclean) ;_ArrayDisplay($Astring1) $dimSTRING = UBound($Astring1) - 1 Local $salvadelete = "" Local $cond1 = 0 For $y = 0 To $dimSTRING If $cond1 = 1 Then ; , removed so exit from loop If $Astring1[$y] = "34" Then ; terzo step " in chiusura ; gollog('Found right "') If $salvadelete = "" Then $salvadelete = String($y) Else $salvadelete = $salvadelete & ";" & $y EndIf $cond1 = 0 ExitLoop EndIf EndIf If $cond1 = 1 Then If $Astring1[$y] = "44" Then ; secondo step , If $salvadelete = "" Then $salvadelete = String($y) Else $salvadelete = $salvadelete & ";" & $y EndIf EndIf EndIf If $Astring1[$y] = "34" And $cond1 = 0 Then ;PRimo step per primo ->" $cond1 = 1 ;gollog('Found left "') If $salvadelete = "" Then $salvadelete = String($y) Else $salvadelete = $salvadelete & ";" & $y EndIf ;Gollog("debug" & $salvaApici) EndIf Next ; Gollog("apici e virgole da togliere: " & $salvadelete) ;gollog("virgole togliere: " & $salvaVirgole) If _ArrayDelete($Astring1, $salvadelete) = -1 Then Gollog("error in arraydelete apici " & @error) gollog(StringFromASCIIArray($Astring1)) Else gollog(' PASS 1 removed unwanted ",," from line ') EndIf $Astring2 = StringFromASCIIArray($Astring1) $Pclean = $Astring2 Return $Pclean EndFunc ;==>preciseremoval You will need the OutlookEX.au3 ,  look at this link and also my logging UDF  _Gollog.au3, attached.
      Used on Outlook  from 2010 to 2016/365 with no problems.
      Hope this script can help someone.
       
      TEST1.csv _GOLLOG.au3
    • By rcmaehl
      Hi all, 

      Recently my work swapped from Cisco CTIOS to Finesse. This completely threw me off as I had been automating the Win32 application and I had never done IUIAutomation before. As such I've been messing around with the API and will be adding code as I figure it out. While I do have Supervisor access, I will likely not be adding functions for those features yet.
      Currently Available Functions:
      User API - Query and Set User Info
      Dialog API - Query and Set Call and other Dialog Info
      Queue API - Query Assigned Queues
      Team API - Query Users in a Team


      Changelog:
       
      Download:
       
    • By Skeletor
      Hi All,
      While creating a few excel spreadsheets using AutoIt, I came across something which to my limiting time to research the forums I don't anyone has mentioned. 
      The color pallettes are reversed. 
      Huge shock to me.
       
      I wanted to produce a red row but kept on getting blue. 
      Seems like 0xFF0000 was red on the charts but when running the script, I got blue. 
      I then played around with the colors, and after a few tries, I finally got Red. 
      Reversed the FF0000 and the result is 0000FF.
       
      So for Excel compared to Html
      0000FF (Red) - Excel
      0000FF (Blue) - Html

      FFFF00 (Cyan) - Excel
      FFFF00(Yellow) - Html
       
    • By Iznogoud
      Hi,
      I was wondering if someone can help me to create an AutoIT script which can create a ticket in a TopDesk environment.
      The API is wel documented, but i have not enough knowlegde at this moment to get this up from the ground. If someone could help me or if i could hire / pay someone to help me with this, that would be great.
      Information about the API can be found here: https://developers.topdesk.com/
      Is there a place where i maybe can hire AutoIT professionals to help me with this?
      On freelancer.com is an option, but there are alot of people responding which doesn't know a thing about AutoIT.
    • By Ascer
      1. Description.
      Automate communication with Gmail API using oAuth 2.0 security. 2. Requirements.
      Google Gmail account. Finished Authorization process. Look here 3. Possibilities.
      ;======================================================================================================================== ; Date: 2018-02-12, 11:46 ; ; Bug Fixs: 2018-02-17, 7:31 -> Fixed problems with adding items to array and minor bugs. ; ; Description: UDF for using Gmail API interface. This UDF requires oAuth.au3 and Gmail account. ; ; Function(s): ; gmailUsersGetProfile() -> Information about your account. ; gmailUsersLabelsList() -> Get all available labels ids. ex. "INBOX", "UNREAD" ; gmailUsersLabelsGet() -> Get information about specific label id. ; gmailUsersMessagesBatchDelete() -> Delete many messages emails by id. ; gmailUsersMessagesBatchModify() -> Set status for many messages ex. "INBOX", "UNREAD" ; gmailUsersMessagesDelete() -> Totaly delete email from ur account. ; gmailUsersMessagesGet() -> Get all information about specific email. ; gmailUsersMessagesList() -> Get list of last ~100 emails. ; gmailUsersMessagesModify() -> Modify single message. ; gmailUsersMessagesTrash() -> Put email in trash. ; gmailUsersMessagesUntrash() -> Restore email from trash. ; gmailUsersMessagesSend() -> Send email to single or group recipients. ; gmailUsersMessagesAttachmentsGet() -> Download attachment by id. ; ; Author(s): Ascer ;======================================================================================================================== 4. Downloads.
      oAuth.au3 Gmail API.au3 5. Examples.
      Sending emails
×
×
  • Create New...