Jump to content

Recommended Posts

Hi guys,

So I am trying to automate a task and this task has an input box with an already set character "9". 

I have just decided that I don't really need the input as an option but it's good to leave however for this instance I would like it to run past this point automatically. I've tried numerous ways to try and automate the use of the "OK" button using ControlClick and various other options. I just can't seem to see where this point in the script is. Scoured the forums for anything similar but didn't have any luck finding anything. Sorry to be a pain and I hope someone can help, if I haven't explained in enough detail please don't hesitate to ask for more.

Many thanks,

Ackerz

 

Local $len
         Local $n
         Local $buff
         Local $aMyDate

            $Len =  InputBox("Test",$msgPrompt,"9")
            $len =  StringStripWS($len,$STR_STRIPALL)

                           ;Check that user has entered a vaild password length
                           if not StringIsDigit($len) or $len = 0 Then
                              MsgBox(48,"Error","Invaild Integer was entered" & @CRLF & "Program will now exit.")
                              Exit
                           EndIf

                           ;This creates the random password.
                           for $i = 1 to $Len
                              ;Pick a random char between 1 and the pwsMask Length
                              $n = int(random(1,StringLen($pwsMask)))
                              ;Concat each char that has been picked out of pwsMask to $buff
                              $buff = $Buff & StringMid($pwsmask,$n,1)
                            
                           Next

 

Link to post
Share on other sites
1 hour ago, Subz said:

Just use the timeout on the InputBox

$Len =  InputBox("Test",$msgPrompt,"9", , , , , 5)

Would I have to put a value in the parameters before that? From my understanding I have put the timeout as "1" above and that should then use the default input for that InputBox.

Have I done this correctly?

Reading through the help told me the last one was timeout so that's why I did this. I have also tried adding parameters into the other options so Width, Height etc and it didn't work.

Apologies for my lack of knowledge.

Link to post
Share on other sites
19 hours ago, Nine said:

yes you need to put all parameters before the timout...if it still doesnt work post your code here

Sure thing.

So it perfectly executes the timeout now. However it goes onto the check and returns with invalid integer so that says to me it's not taking the "9" I'm putting in as a parameter for my InputBox. I have tried to skip this check but then well it didn't work at all.

Local $len
         Local $n
         Local $buff
         Local $aMyDate

            $Len =  InputBox("Test",$msgPrompt,"9","",-1,-1,Default,Default,3)
            $len =  StringStripWS($len,$STR_STRIPALL)

                           ;Check that user has entered a valid password length
                           if not StringIsDigit($len) or $len = 0 Then
                              MsgBox(48,"Error","Invalid Integer was entered" & @CRLF & "Program will now exit.")
                              Exit
                           EndIf

                           ;This creates the random password.
                           for $i = 1 to $Len
                              ;Pick a random char between 1 and the pwsMask Length
                              $n = int(random(1,StringLen($pwsMask)))
                              ;Concat each char that has been picked out of pwsMask to $buff
                              $buff = $Buff & StringMid($pwsmask,$n,1)
                            
                           Next

 

Link to post
Share on other sites
17 minutes ago, Ackerz said:

I have tried to skip this check but then well it didn't work at all.

You must check the @error if it is set ....

Return Value

Success: the string that was entered.
Failure: "" (empty string) and sets the @error flag to non-zero.
@error: 1 = The Cancel button was pushed.
2 = The Timeout time was reached.
3 = The InputBox failed to open. This is usually caused by bad arguments.
4 = The InputBox cannot be displayed on any monitor.
5 = Invalid parameters width without height or left without top.
Link to post
Share on other sites
20 hours ago, Nine said:

You must check the @error if it is set ....

Return Value

Success: the string that was entered.
Failure: "" (empty string) and sets the @error flag to non-zero.
@error: 1 = The Cancel button was pushed.
2 = The Timeout time was reached.
3 = The InputBox failed to open. This is usually caused by bad arguments.
4 = The InputBox cannot be displayed on any monitor.
5 = Invalid parameters width without height or left without top.

I must apologise not sure what you mean here. @error isn't set. I'm still lost at to what to do next, I'm going to do some more reading in the mean time so I feel stupid.

Link to post
Share on other sites

Sorry didn't read the help correctly, here is how I would write it, you can toggle the input change $bPwdLength to True or False

;~ Toggle InputBox
;~      $bPwdLength = True - Show InputBox
;~      $bPwdLength = False - Hide InputBox (Uses $iPwdLength value as default)
Local $bPwdLength = False

Local $iPwdLength = 9
Local $sPwdLength = "Please enter a number"
If $bPwdLength Then $iPwdLength = InputBox("Test", $sPwdLength, "9")
    $iPwdLength =  StringStripWS($iPwdLength,8)
;~ Check that user has entered a valid password length
    If Not StringIsDigit($iPwdLength) Or $iPwdLength = 0 Then Exit MsgBox(48,"Error","Invalid Integer was entered" & @CRLF & "Program will now exit.")

Local $n
Local $sPwdBuff
Local $sPwdMask = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz!@#$%^&*()01234567890"
;~ This creates the random password.
    For $i = 1 to $iPwdLength
        ;~ Pick a random char between 1 and the pwsMask Length
        $n = Int(Random(1, StringLen($sPwdMask)))
        ;~ Concat each char that has been picked out of pwsMask to $sPwdBuff
        $sPwdBuff &= StringMid($sPwdMask, $n, 1)
        ConsoleWrite($sPwdBuff & @CRLF)
    Next

And as @Nine mentioned you could use @error like so:

$Len =  InputBox("Test",$msgPrompt,"9","",-1,-1,Default,Default,3)
;~ Time out was reached then set the default value
If @error = 2 Then $Len = 9

 

Edited by Subz
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By odaylton
      Text translated from Portuguese by google - please apologize for any errors
       
      First I have to thank the development team for product quality and the ease with which it is possible to develop tools with AutoIt.
       
      I am developing a series of libraries to facilitate the creation of Forms that once it is stable and comprehensive I intend to share here for autoit
      But suddenly during development an unexpected effect appeared in simple inputbox fields.
       
      Everything is working fine, however if I'm in an inputbox, don't change its selected content and move focus to another field the selected text remains blue (selected) instead of returning to normal
      See the image....

      When pricing 3x TABs all remain blue
       
      However if I change the field , when leaving its focus it behaves normally
      See the ex below:

      1) I selected “tipo Default” and pressed TAB (to test what happens)
      2) typed "TESTE" and pressed TAB
      3) I pressed TAB 2x again and the "Centralizado" field turned blue
      Note: by default, when receiving focus, the text is always automatically selected
       
      Here are some parts of the code:
      Gui  create:
      ;modifique o tamanho inicial aqui ;$Form[$Form[0][0]][1] = 600 ;largura =800 ;$Form[$Form[0][0]][2] = 600 ;Atura =600 ;$Form[$Form[0][0]][3] = "RoboAutomato - "&$NomeProjeto $Form[$Form[0][0]][0] = GUICreate($Form[$Form[0][0]][3], _ $Form[$Form[0][0]][1], $Form[$Form[0][0]][2], _ Default, Default, _ BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP, $WS_POPUP)) GUISetFont($FormFonteTam, _ ;Tamanho da Fonte $FormFonteTipo, _ ;Tipo da Fonte $FormFonteEstilo, _ ;Estilo da Fonte $FormFonteNome) ; Nome da Fonte #Region Criando ToolTip $hGUIToolTip = _GUIToolTip_Create($Form[$Form[0][0]][0], BitOR($_TT_ghTTDefaultStyle, $TTS_BALLOON)) ; balloon style tooltip #EndRegion Criando ToolTip  inputs create:
      .... InputCriar(200, 200, _ ;Coordenadas Base Default, Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela "|Referencia|", _ ;Label do Input "Tudo Default ou qq diferente de 1,2,3,4: mais simples", _ ;Texto explicativo do InputBox e seu label "Teste do tipo Default", _ ;Valor Default da Input Default, _ ;0 é Defaultou define o estilo Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" Default, _ Default, _ Default, _ ; Tipo de alinhamento em relação a Janela Default, _ ;Tamanho da Fonte Default, _ ;Tipo da Fonte Default, _ ;Estilo da Fonte Default) ; Nome da Fonte InputCriar(200, Default, _ ;Coordenadas Base Default, Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela "|Canto inferior esquerdo|", _ ;Label do Input "Tipo 1: 2 linhas", _ ;Texto explicativo do InputBox e seu label "Tipo 1: 2 linhas", _ ;Valor Default da Input 1, _ ;0 é Defaultou define o estilo Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" Default, _ Default, _ Default, _ ; Tipo de alinhamento em relação a Janela Default, _ ;Tamanho da Fonte Default, _ ;Tipo da Fonte Default, _ ;Estilo da Fonte Default) ; Nome da Fonte ..... Function InputCriar:
      Func InputCriar($InputX = Default, $InputY = Default, _ ;Coordenadas Base Canto Superior Esquerdo se não definido proxima linha e coluna $InputWidth = Default, $InputHeight = Default, _ ;Largura e Altura automatica se negativo em função do extremo da janela $InputRotulo = "", _ ;Label do Inpu $InputTip = "", _ ;Texto explicativo do InputBox e seu label $InputDefault = "", _ ;Valor Default da Input $InputAlin = Default, _ ;0 é Defaultou define o estilo $InputMascara = Default, _ ;Defini a forma de incerção Default=20 caracteres "CCCCCCCCCCCCCCCCCCCC" $InputEstilo = Default, _ $InputEstiloEx = Default, _ $InputResizing = Default, _ ; Tipo de alinhamento em relação a Janela $InputTamFonte = Default, _ ;Tamanho da Fonte $InputFonteTipo = Default, _ ;Tipo da Fonte $InputFonteEstilo = Default, _ ;Estilo da Fonte $InputFonteNome = Default) ; Nome da Fonte .... $InputEstilo = BitOR($ES_AUTOHSCROLL, _ $WS_TABSTOP) ... $InputEstiloEx = $WS_EX_CLIENTEDGE ;formato baixo relevo ... $Inputs[$Inputs[0][0]][0] = GUICtrlCreateInput($Mascara5, _ ;Default da Input $Form[$Form[0][0]][6]+$InputX, $Form[$Form[0][0]][7]+$InputY, _ ;Coordenadas Base $InputWidth, $InputHeight, _ ;Altura e largura automatica $InputEstilo, _ ;Estilo $InputEstiloEx) ;Extilo extra ... GUICtrlSetData($Inputs[$Inputs[0][0]][0], $Inputs[$Inputs[0][0]][3]) Return $Inputs[$Inputs[0][0]][0] EndFunc ;==>InputCriar sorry for not putting all the code because there are many libraries and they are in the initial stage of development
       
      What should I change to get Inputbox's behavior back to normal????
      Thank you for your attention
    • By nooneclose
      Why can I not click on either of my input fields?
      #Region ### START Koda GUI section ### Form= Global $Form1 = GUICreate("Form1", 730, 437, 192, 124) ;GUISetFont(14, 800, 0, "MS Sans Serif") GUISetBkColor(0xC0DCC0) Global $Label1 = GUICtrlCreateLabel("Enter your Password. UserName is auto filled", 62, 40, 604, 41, $SS_CENTER) GUICtrlSetFont(-1, 26, 800, 0, "MS Sans Serif") Global $Label2 = GUICtrlCreateLabel("User Name:", 120, 130, 604, 31, $SS_LEFT) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") Global $Label3 = GUICtrlCreateLabel("Password:", 135, 210, 604, 31, $SS_LEFT) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") Global $Input1 = GUICtrlCreateInput(@UserName, 274, 130, 185, 32) GUICtrlSetFont(-1, 14, 800, 1, "MS Sans Serif") Global $Input2 = GUICtrlCreateInput("Password", 274, 210, 185, 32, $ES_PASSWORD) GUICtrlSetFont(-1, 14, 800, 0, "MS Sans Serif") Global $OK = GUICtrlCreateButton("OK", 274, 270, 185, 57) GUICtrlSetFont(-1, 20, 800, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $OK Global $UserName = GUICtrlRead($Input1) Global $PassWord = GUICtrlRead($Input2) ExitLoop EndSwitch WEnd ; Delete the GUI window GUIDelete()  
    • By matwachich
      Hi AutoIters!
      Here is my new UDF about GUIs: it's an enhanced mixture of Advanced InputBox (deprecated) and KODA Parser (deprecated), with additional functions.
      What you can do with it:
      Parse KODA files and directly create GUIs (_GUIUtils_CreateFromKODA) Parse a simple JSON form definition to simply create advanced InputBoxes with any amount/type of input controls (_GUIUtils_CreateFromJSON) Created GUIs are returned as Scripting.Dictionary objects, and you have helper functions to access GUIs controls by their names (_GUIUtils_HWnd, _GUIUtils_CtrlID, _GUIUtils_HCtrl ...) A function that can make a GUI created from KODA/JSON (defined by it's $oForm object) and make it a modal InputDialogBox (just like InputBox, but returns all entered data as Scripting.Dictionary object) Functions are documented, and there are some examples.
      Consider this UDF as beta, but since I'm currently using it in a small commercial project, it should become production ready in near future.
      To always get the latest code version, get it from Github (more up to date than this topic).
      Update 04/02/2020:
      New simple application example Fixed focused control handling in _GUIUtils_InputDialog Reset input values before returning from _GUIUtils_InputDialog Fixed CloseOnEsc in _GUIUtils_InputDialog Fixed Input not reset Fixed all ListBox items are selected Project now on GitHub https://github.com/matwachich/autoit-guiutils/
      Update 05/02/2020:
      Support for nodate for Date and Time input controls (pass null value) New handling of focused control _GUIUtils_InputDialog: Now, you can specify the focused control in $oInitialData by setting "controlName:focus" = True Updated documentation of _GUIUtils_InputDialog Update 07/02/2020:
      Bug corrected when setting Data input control Added: abillity to read a single input control New functions (_GUIUtils_GetInputs, _GUIUtils_WriteInputs), documentation completion. Readme file and screenshots on Github Page  
      GUIUtils.zip
    • By matwachich
      DEPRECATED: see this new UDF
       
    • By robertocm
      I'm trying to use some inputboxes as radio buttons.
      This code seems to work ok, but don't know if there's is a better 'option'
      #include <GUIConstantsEx.au3> #include <GuiConstants.au3> GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") Global $aInput[4] $hGUI = GUICreate("Test", 500, 500) $aInput[0] = GUICtrlCreateInput("Some text 1a", 10, 10, 200, 24) $aInput[1] = GUICtrlCreateInput("Some text 1b", 10, 40, 200, 24) $aInput[2] = GUICtrlCreateInput("Some text 2a", 10, 80, 200, 24) $aInput[3] = GUICtrlCreateInput("Some text 2b", 10, 110, 200, 24) GUISetState(@SW_SHOW, $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop EndSwitch WEnd Func WM_COMMAND($hWnd, $msg, $wParam, $lParam) Local $nNotifyCode = BitShift($wParam, 16) ; high word Local $nID = BitAND($wParam, 0xFFFF) ; low word Local $hCtrl = $lParam Switch $nID Case $aInput[0] Switch $nNotifyCode Case $EN_SETFOCUS GUICtrlSetBkColor($aInput[0], 0x98FB98) GUICtrlSetBkColor($aInput[1], 0xD3D3D3) EndSwitch Case $aInput[1] Switch $nNotifyCode Case $EN_SETFOCUS GUICtrlSetBkColor($aInput[0], 0xD3D3D3) GUICtrlSetBkColor($aInput[1], 0x98FB98) EndSwitch Case $aInput[2] Switch $nNotifyCode Case $EN_SETFOCUS GUICtrlSetBkColor($aInput[2], 0x98FB98) GUICtrlSetBkColor($aInput[3], 0xD3D3D3) EndSwitch Case $aInput[3] Switch $nNotifyCode Case $EN_SETFOCUS GUICtrlSetBkColor($aInput[2], 0xD3D3D3) GUICtrlSetBkColor($aInput[3], 0x98FB98) EndSwitch EndSwitch ; Proceed the default Autoit3 internal message commands. ; You also can complete let the line out. ; !!! But only 'Return' (without any value) will not proceed ; the default Autoit3-message in the future !!! Return $GUI_RUNDEFMSG EndFunc ;==>WM_COMMAND Would you recommend using _WinAPI_GetFocus instead?
       
       
      Thanks,
       
×
×
  • Create New...