Exit Button.

liten · June 10, 2009

Well, i have finished my script and i have all the higher challenged things down but the one thing i cant do is make an exit button, how, it earks me i can make a complete script but no Exit button,

Please Help.

TESTTH · June 10, 2009

liten said:
Well, i have finished my script and i have all the higher challenged things down but the one thing i cant do is make an exit button, how, it earks me i can make a complete script but no Exit button,

Please Help.

?

#include <GUIConstants.au3>
;
$hGUI = GUICreate("Exit Button")
$Exit = GUICtrlCreateButton ("Exit",  10, 30, 100)
GUISetState ()
;
do
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            ExitLoop
        Case $msg = $Exit
            Exit
    EndSelect
until $msg = $GUI_EVENT_CLOSE

liten · June 10, 2009

TESTTH said:

?

#include <GUIConstants.au3>
;
$hGUI = GUICreate("Exit Button")
$Exit = GUICtrlCreateButton ("Exit",  10, 30, 100)
GUISetState ()
;
do
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            ExitLoop
        Case $msg = $Exit
            Exit
    EndSelect
until $msg = $GUI_EVENT_CLOSE

That code dosent work for some reason. nothing happens when i click the button

Yashied · June 10, 2009

liten said:
That code dosent work for some reason. nothing happens when i click the button

This works if you have not changed anything here.

liten · June 10, 2009

Yashied said:
This works if you have not changed anything here.

Hm, the only thing i seem to have edited was $sGUI to just $GUI, $Exit and $Button1(my exitbutton name) besides that i have changed nothing?

coul dit be i need to use

func x()

or just us the do and be on, sorry i am confused

Yashied · June 10, 2009

Please post here your code.

Inverted · June 10, 2009

If you changed $Exit, I hope you also changed the line :

Case $msg = $Exit

liten · June 10, 2009

do
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            ExitLoop
        Case $msg = $Button1
            Exit
    EndSelect
until $msg = $GUI_EVENT_CLOSE

and also - which is at top of page almost with other GUICreate,

GUI = GUICreate("Exit Button")

and

$Button1 = GUICtrlCreateButton("EXIT", 159, 56, 321, 129, $WS_GROUP, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUISetState ()
GUICtrlSetFont(-1, 29, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0xB9D1EA)
GUICtrlSetBkColor(-1, 0x000000)

which is with all my other GUI things,

Edited June 10, 2009 by liten

Inverted · June 10, 2009

Looks pretty correct to me. Are you sure the do ... until loop is being executed ?

liten · June 10, 2009

Inverted said:
Looks pretty correct to me. Are you sure the do ... until loop is being executed ?

How would i find this out?

rajeshontheweb · June 10, 2009

there is a small possibility u might have used the $msg variable elsewhere which may not be corresponding to the constant value properly.

u might want to try

until GUIGetMsg() = $GUI_EVENT_CLOSE

liten · June 10, 2009

Sadly Still dosent work, is their any other way to make an exit button, like with _ispressed or something, if so please leave a code or explain to me so i can do it

liten · June 10, 2009

I also tried

Func MS()
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("Process.exe"))
    _MemoryWrite($CTT, $ID, GuiCtrlRead($Slider2))
    While 1    
     MoveSpeed() 
    Wend
 _MemoryClose($ID) 
 EndFunc

Inverted · June 10, 2009

Wtf was that ...

Post your whole script. Seems you keep doing weird stuff, no longer you can't make the simplest of things work.

Valuater · June 10, 2009

liten said:

I also tried

Func MS()
     SetPrivilege("SeDebugPrivilege", 1)
     $ID = _MemoryOpen(ProcessExists("Process.exe"))
     _MemoryWrite($CTT, $ID, GuiCtrlRead($Slider2))
     While 1       
      MoveSpeed() 
     Wend
  _MemoryClose($ID) 
  EndFunc

I just told you yesterday.... you CAN NOT do this within the function (correctly)

While 1

MoveSpeed()

Wend

8)

Edited June 10, 2009 by Valuater

liten · June 10, 2009

Inverted said:
Wtf was that ...

Post your whole script. Seems you keep doing weird stuff, no longer you can't make the simplest of things work.

#RequireAdmin
#AutoIt3Wrapper_icon=ATX.ico
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <GUIListBox.au3>
#include <SliderConstants.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <Nomadmemory.au3>
#include <Array.au3>
#include <memory.au3>
#include <Inet.au3>
#include <GUIConstants.au3>
#Region 
WinWaitActive("Process") 
Opt('GUIOnEventMode', 1)
;#####################PAUSE AND ESCAPE#################################################
Global $Paused

HotKeySet("{PAUSE}", "TogglePause")
HotKeySet("{ESC}", "Terminate")

Global $hGUI
Global $Radio1
Global $Radio2
Global $Radio3
Global $Radio4
Global $Slider1
Global $Slider2 
Global $Button1
;###########################GUI########################################################
$GUI = GUICreate("ExitButton", 300, 200)
$hGUI = GUICreate('Test', 200, 200)
GUISetOnEvent($GUI_EVENT_CLOSE, '_Close')
$Form1_1 = GUICreate("XXXXXXX", 609, 463, 210, 211)
$List1 = GUICtrlCreateList("", 7, 16, 113, 151, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetData(-1, "Free:No rights")
GUICtrlSetCursor (-1, 7)
$Li = GUICtrlCreateLabel("XXXXXXX", 135, 24, 380, 30, -1, BitOR($WS_EX_CLIENTEDGE,$GUI_WS_EX_PARENTDRAG))
GUICtrlSetFont(-1, 17, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0xFF0000)
GUICtrlSetBkColor(-1, 0x000000)
$Slider1 = GUICtrlCreateSlider(135, 216, 369, 17)
GUICtrlSetOnEvent($Slider1, 'RadioSpeed3')
GUICtrlSetLimit(-1, 250, 0)
$Label1 = GUICtrlCreateLabel("AS", 127, 192, 69, 17)
GUICtrlSetColor(-1, 0x99B4D1)
GUICtrlSetBkColor(-1, 0x000000)
$Checkbox1 = GUICtrlCreateCheckbox("checkbox1", 87, 216, 17, 17, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetBkColor(-1, 0xA0A0A4)
$Edit = GUICtrlCreateEdit("", 135, 240, 369, 57, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetData(-1, "PUT NOTES AND VARIOUS THING YOU FIND AND WANT TO REMEMBER HERE:")
$Button1 = GUICtrlCreateButton("EXIT", 159, 56, 321, 129, $WS_GROUP, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUISetState ()
GUICtrlSetFont(-1, 29, 400, 0, "MS Sans Serif")
GUICtrlSetColor(-1, 0xB9D1EA)
GUICtrlSetBkColor(-1, 0x000000)
$Label2 = GUICtrlCreateLabel("MS", 127, 320, 65, 17)
GUICtrlSetColor(-1, 0x99B4D1)
GUICtrlSetBkColor(-1, 0x000000)
$Button2 = GUICtrlCreateButton("NB", 135, 344, 81, 17, $WS_GROUP)
$Button3 = GUICtrlCreateButton("DS", 231, 344, 81, 17, $WS_GROUP)
$Button4 = GUICtrlCreateButton("CTT", 423, 344, 81, 17, $WS_GROUP)
GUICtrlSetFont(-1, 7, 400, 0, "Tahoma")
$Button5 = GUICtrlCreateButton("Triple Speed", 327, 344, 81, 17, $WS_GROUP)
$Slider2 = GUICtrlCreateSlider(135, 384, 369, 17)
GUICtrlSetOnEvent($Slider2, 'RadioSpeed3')
GUICtrlSetLimit(-1, 25000, 0)
$Label3 = GUICtrlCreateLabel("on/off", 39, 216, 33, 17)
GUICtrlSetColor(-1, 0x99B4D1)
GUICtrlSetBkColor(-1, 0x000000)
$List2 = GUICtrlCreateList("", 7, 248, 105, 175)
GUICtrlSetData(-1, "Free:No rights")
GUICtrlSetCursor (-1, 7)
$List3 = GUICtrlCreateList("", 519, 16, 81, 409)
GUICtrlSetData(-1, "Free:No rights")
GUICtrlSetCursor (-1, 7)
$List4 = GUICtrlCreateList("", 151, 408, 329, 45)
GUICtrlSetData(-1, "Free:No rights to distribute, or use this porgram,")
$Radio1 = GUICtrlCreateRadio("Radio1", 168, 360, 17, 17)
GUICtrlSetOnEvent($Radio1, 'RadioSpeed1')
GUICtrlSetBkColor(-1, 0x000000)
$Radio2 = GUICtrlCreateRadio("Radio2", 264, 360, 17, 17)
GUICtrlSetOnEvent($Radio2, 'RadioSpeed2')
GUICtrlSetBkColor(-1, 0x000000)
$Radio3 = GUICtrlCreateRadio("Radio3", 360, 360, 17, 17)
GUICtrlSetOnEvent($Radio3, 'RadioSpeed3')
GUICtrlSetBkColor(-1, 0x000000)
$Radio4 = GUICtrlCreateRadio("Radio4", 456, 360, 17, 17)
GUICtrlSetOnEvent($Radio4, 'RadioSpeed4')
GUICtrlSetBkColor(-1, 0x000000)
$Pic1 = GUICtrlCreatePic("important\BKG.jpg", 0, 0, 609, 465, BitOR($SS_NOTIFY,$WS_GROUP,$WS_CLIPSIBLINGS))
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
;############################Addresses###################################
$AS = 0x00B8451B
$CTT = 0x00B5EF18
;##########################GUI FUNCTIONS########################### 

Func Protect()
     While 1

If BitAnd(GUICtrlRead($Checkbox1), $GUI_CHECKED) = $GUI_CHECKED Then
            GUICtrlSetState($Slider2, $GUI_DISABLE)
            GUICtrlSetState($Slider1, $GUI_DISABLE)
            GUICtrlSetState($Radio1, $GUI_ENABLE)
            GUICtrlSetState($Radio2, $GUI_ENABLE)
            GUICtrlSetState($Radio3, $GUI_ENABLE)
            GUICtrlSetState($Radio4, $GUI_ENABLE)
        Else
            GUICtrlSetState($Slider2, $GUI_ENABLE)
            GUICtrlSetState($Slider1, $GUI_ENABLE)
            GUICtrlSetState($Radio1, $GUI_DISABLE)
            GUICtrlSetState($Radio2, $GUI_DISABLE)
            GUICtrlSetState($Radio3, $GUI_DISABLE)
            GUICtrlSetState($Radio4, $GUI_DISABLE)
        EndIf
 WEnd
 EndFunc
 
Func RadioSpeed1()
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("Process.exe"))
    If BitAnd(GUICtrlRead($Radio1), $GUI_CHECKED) = $GUI_CHECKED  Then
        _MemoryWrite($CTT, $ID, 0)
    EndIf
    _MemoryClose($ID)
EndFunc

Func RadioSpeed2()
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("Process.exe"))
    If BitAnd(GUICtrlRead($Radio2), $GUI_CHECKED) = $GUI_CHECKED  Then
        _MemoryWrite($CTT, $ID, 200)
    EndIf
    _MemoryClose($ID)
EndFunc

       
Func RadioSpeed3()
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("Process.exe"))
    If BitAnd(GUICtrlRead($Radio3), $GUI_CHECKED) = $GUI_CHECKED  Then
        _MemoryWrite($CTT, $ID, 300)
    EndIf
    _MemoryClose($ID)
EndFunc

Func RadioSpeed4()
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("Process.exe"))
    If BitAnd(GUICtrlRead($Radio4), $GUI_CHECKED) = $GUI_CHECKED  Then
        _MemoryWrite($CTT, $ID, 25000)
    EndIf
    _MemoryClose($ID)
EndFunc

Func _Close()
    GUIDelete()
    Exit
EndFunc
;###############################Sliders#######################################################

Func AS()  
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("Program.exe"))
    _MemoryWrite($AS, $ID, GuiCtrlRead($Slider1))
      _MemoryClose($ID) 
  EndFunc
  
  Func MS()  
    SetPrivilege("SeDebugPrivilege", 1)
    $ID = _MemoryOpen(ProcessExists("program.exe"))
    _MemoryWrite($CTT, $ID, GuiCtrlRead($Slider2))
      _MemoryClose($ID) 
  EndFunc
  
;###################################WHILE ONE REPEAT###########################################
    While 1    
     Protect()
     RadioSpeed1()
     RadioSpeed2()
     RadioSpeed3()
     RadioSpeed4()
     MS()
     AS()
 Wend
;###############################EXIT BUTTON############################

Do
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            ExitLoop
        Case $msg = $Button1
            Exit
    EndSelect
until $msg = $GUI_EVENT_CLOSE

;############################END OF EXIT BUTTON##########  ################# 
While 1

     $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

    EndSwitch
WEnd
Func TogglePause()
    $Paused = Not $Paused
    While $Paused
        Sleep(100)
        ToolTip('" PAUSED"', 512, 15)
    WEnd
    ToolTip("")
EndFunc ;==>TogglePause

Func Terminate()
    ToolTip('"Exiting"', 512, 15)
    Sleep(1000)
    ToolTip("")
    Exit 0
EndFunc ;==>Terminate

Edited June 10, 2009 by liten

liten · June 10, 2009

Valuater said:
I just told you yesterday.... you CAN NOT do this within the function (correctly)
While 1
MoveSpeed()
Wend
8)

Even without the while, it dosent work, that was ust another option i was trying

Valuater · June 10, 2009

ok

1

You can not combine "OnEventMode" with GUIGetMsg()

2

There are no on event functions set to the button

3

When creating a GUI only use GUISetState() once

... There are probably more probs, but thats a start

8)

liten · June 30, 2009

So whats a SIMPLE button script one that has all that you said, OMG i FAIL at buttons, ...

picea892 · June 30, 2009

#include <GUIConstantsEx.au3>
#include <ButtonConstants.au3>

Example()

Func Example()
    Local $Button_1, $Button_2, $msg
    GUICreate("My GUI Button"); will create a dialog box that when displayed is centered

    Opt("GUICoordMode", 2)
    $Button_1 = GUICtrlCreateButton("Exit", 10, 30, 100)
    $Button_2 = GUICtrlCreateButton("Button Test", 10,50, -1,$BS_BITMAP)
GUICtrlSetImage(-1, "shell32.dll", 22)
    GUISetState()    ; will display an  dialog box with 2 button

   ; Run the GUI until the dialog is closed
    While 1
        $msg = GUIGetMsg()
        Select
            Case $msg = $GUI_EVENT_CLOSE
                ExitLoop
            Case $msg = $Button_1
                ExitLoop  
            Case $msg = $Button_2
                MsgBox(0, 'Testing', 'Button 2 was pressed')   ; Will demonstrate Button 2 being pressed
        EndSelect
    WEnd
EndFunc  ;==>Example

Sign In

Exit Button.

Recommended Posts

liten

TESTTH

liten

Yashied

liten

Yashied

Inverted

liten

Inverted

liten

rajeshontheweb

liten

liten

Inverted

Valuater

liten

liten

Valuater

liten

picea892

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

AutoIt Resources

Release

Beta