Timeline


and

10/15/08:

22:08 Ticket #622 (_BlockInputExc) closed by Valik
Rejected: This is just a little piece of example code. It's a long way from what it needs to be in order to even be considered for inclusion. Come back again when you have a function with documentation.
22:00 Ticket #619 (_GuiCtrlListView_SetItemSelected Problem (confirmed problem)) closed by Gary
Fixed: Fixed in version: 3.2.13.10
21:42 Ticket #622 (_BlockInputExc) created by Ken82m
This is written by another forum user, RASIM. Here's the thread: …
20:47 Ticket #621 (_StringAddThousandsSep don't work with negative number) created by Refran
the old UDF _StringAddComma did that. Description and solution see …
16:54 Ticket #616 (New Function or Parms for BlockInput - Allow Hotkeys) closed by Valik
Rejected: Not going to happen.
16:43 Ticket #620 (complete documentation as PDF file) closed by Valik
Rejected: Either find a CHM to PDF converter or print the CHM version.
16:06 Ticket #620 (complete documentation as PDF file) created by dzugel@…
It sure would be great to be able to download a PDF version of the …
14:48 Ticket #619 (_GuiCtrlListView_SetItemSelected Problem (confirmed problem)) created by anonymous
Here was the original bug report - In function …
14:47 Ticket #618 (_WinAPI_OpenProcess documentation needs updating) created by monoceres
The documentation needs to list the different access flags so you …
05:17 Ticket #617 (GDI+: corrected help file examples for six ImageGet functions) created by rover
corrections to six GDI+ ImageGet help file examples in beta 3.2.13.9 …
04:29 Ticket #616 (New Function or Parms for BlockInput - Allow Hotkeys) created by Kenny782@…
I think it would be a good feature to allow specific keys to be …

10/13/08:

22:42 Ticket #615 (License needs fixed) created by Valik
Reminder for Jon that the license is not right. …
21:53 Ticket #614 (DriveMapAdd doesn't work on Vista.) created by Tlem
Hello, I'll try this sample code without any success in Vista : […] …
21:39 Ticket #610 (WinAPI.au3 _WinAPI_CreateFile() does not return 0 on failure as ...) closed by Gary
Fixed: Fixed in version: 3.2.13.10
21:30 Ticket #613 (Obfsucator Stripping ObjEvent functions) closed by Gary
No Bug: use the directives: #Obfuscator_Off ;Stop the Obfuscation process below this line #Obfuscator_On ;Start the Obfuscation process below this line
17:22 Ticket #613 (Obfsucator Stripping ObjEvent functions) created by tulio150
[…] Running Obfuscator will remove the "PrefixEvent" UDF, but not …
15:24 Ticket #612 (Need AutoIT to output DLL) closed by Valik
Rejected: It's not going to happen. You can see if AutoItX will suit your needs but as for compiling a script to a DLL, not going to happen.
12:35 Ticket #612 (Need AutoIT to output DLL) created by susan.llewellyn@…
Currently, AutoIT v3 supports creating an EXE. I need a way to create …
00:32 Ticket #611 (This caused crashing: $pcLocked = ...) closed by Valik
No Bug: The problem is you aren't calling the function correctly. The function you are trying to call via DllCall() takes 3 arguments you aren't providing. This is not a bug.

10/12/08:

23:04 Ticket #611 (This caused crashing: $pcLocked = ...) created by ducjava@…
This caused crashing: $pcLocked = …
21:04 Milestone 3.2.13.9 completed
18:27 Ticket #610 (WinAPI.au3 _WinAPI_CreateFile() does not return 0 on failure as ...) created by Bowmore
Tested on WinXP SP3 AutoIt Beta 3.2.13.8 WinAPI.au3 This may be …

10/11/08:

21:09 Ticket #609 (@FunctionName, VarGetName()) closed by Valik
Rejected: Adding a @FunctionName macro is very expensive performance-wise (it's been done before). As for VarGetName(), pretty much impossible with the current internal architecture or at any rate I don't think it would be reliable in 100% of the uses.
20:18 Ticket #609 (@FunctionName, VarGetName()) created by Viring
I don't have knowledge of the internal workings of AutoIt or how …
10:32 Ticket #608 (GUICtrlSetBkColor not working properly on ListView control) closed by Jpm
Fixed: Fixed in version: 3.2.13.9
06:25 Ticket #608 (GUICtrlSetBkColor not working properly on ListView control) created by MsCreatoR <mscreator@…>
When GUICtrlSet(Bk)Color() function used on ListView control, there is …

10/10/08:

22:59 Ticket #603 (_FileReadToArray() does not return an array if the file contains only ...) closed by Gary
Fixed: Fixed in version: 3.2.13.9
22:38 Ticket #607 (_GUICtrlListView_SetItemSelected Problem) closed by Gary
Works For Me: Works for me
22:36 Ticket #606 (Return value error in _GUICtrlListView_GetSelectedIndices) closed by Gary
Works For Me: This works for me: […]

10/09/08:

08:23 Ticket #601 (Helpfile should mention that ToolTip "title" can be max 99 characters) closed by Jpm
Fixed: Fixed in version: 3.2.13.9
07:29 Ticket #607 (_GUICtrlListView_SetItemSelected Problem) created by Anomalism@…
In function _GUICtrlListView_SetItemSelected,has memory problem …

10/08/08:

23:28 Ticket #606 (Return value error in _GUICtrlListView_GetSelectedIndices) created by jlundqui
When the index of the selected listview item is 0, the string version …
12:35 Ticket #605 (_InetSmtpMail sets wrong Date) created by sbolz@…
I use _InetSmtpMail to send E-Mail over Notes 5.0.12 SMTP Server. …
09:31 Ticket #604 (implement the transparency of all Ctrl) created by vde75-forum@…
Hi. I use background picture for some app. But, some control are not …

10/07/08:

20:05 Ticket #602 (AutoitWrapper Methods for Handling 'Run After') closed by Jos
Rejected: Use the fully qualified pathfor the exe to make sure it knows where to look for it. Also please post these type of "issues" in the support forum so we can establish what the issue is and don;t think it belongs is the "New features request" section. Jos
11:47 Ticket #603 (_FileReadToArray() does not return an array if the file contains only ...) created by Bowmore
In AutoIt 3.2.13.8 and previous beta versions _FileReadToArray() does …
01:50 Ticket #602 (AutoitWrapper Methods for Handling 'Run After') created by Asaman83687
I compiled my script for an experiment when i encountered this error …

10/05/08:

21:43 Ticket #601 (Helpfile should mention that ToolTip "title" can be max 99 characters) created by AdmiralAlkex
In the forum thread @ …

10/04/08:

20:31 Ticket #600 (Array.au3 in Beta 3.2.13.8 the functions don't work with 2D Array) closed by Gary
Fixed: Fixed in version: 3.2.13.9
18:29 Ticket #600 (Array.au3 in Beta 3.2.13.8 the functions don't work with 2D Array) created by TalivanIBM
i have proved the Beta 3.2.13.8 and, for example, the function …
13:56 Milestone 3.2.13.8 completed
05:55 Ticket #599 (_FileListToArray costs O(N^2) instead of O(NlogN)) created by code65536
Memory re-allocation is an expensive operation and as such, should be …

10/03/08:

15:38 Ticket #598 (database access (Microsoft)) closed by Valik
Rejected: You can do it via COM.
08:41 Ticket #598 (database access (Microsoft)) created by Evilshell (evilshell@…
For AutoIt lacks features that allow an application written in AutoIt …

09/30/08:

06:59 Ticket #454 (FileRead handle files as UTF-8 even BOM is missing) closed by Jpm
Completed: $FO_UTF8 will work for opening in read mode

09/28/08:

22:40 Ticket #597 (Documentation @TempDir needs updating) closed by Valik
No Bug: That's wrong. @TempDir will return whatever it finds first: 1. The path specified by the TMP environment variable. 2. The path specified by the TEMP environment variable. 3. The path specified by the USERPROFILE environment variable. 4. The Windows directory. So it will find TMP first if it exists: […] I don't see that this needs documented, however. People have been using the macro for years and have never needed to know how it was implemented.
21:07 Ticket #597 (Documentation @TempDir needs updating) created by Emiel Wieldraaijer
Macro Reference - Directory @TempDir -> path to the temporary files …

09/27/08:

20:23 Ticket #596 (String<From/To>ASCIIArray() functions) created by Valik
There are potential issues with these functions I need to look at. …

09/26/08:

23:51 Ticket #454 (FileRead handle files as UTF-8 even BOM is missing) reopened by Valik
Alright, somebody actually gave me a file which demonstrated the problem and the desired outcome and I now see what the OP means. Would have been helpful to have that from the start, however.
23:18 Ticket #454 (FileRead handle files as UTF-8 even BOM is missing) closed by Valik
Rejected: I don't know what your expectations are. UTF-8 files don't need a BOM because it's pretty much pointless for the encoding so the comment on it being missing is irrelevant. As for the behavior, UTF-8 is fully backwards compatible with ANSI so if your file contains all ANSI characters it's going to be treated as ANSI, BOM or not. If there was a problem with the behavior here it would actually be bug and not a feature request. Since nobody else has clearly demonstrated any issue I'm closing this as rejected.
18:07 Ticket #520 (WMI SwbemRefresher Object used in a loop has memory leak) closed by Valik
No Bug: This is not a leak in AutoIt. I tried calling the Remove() and DeleteAll() methods on the $oRefresher object to get rid of the enumeration but it still leaks. I tested with identical VBS code and it also leaks. Here's the AutoIt code I used: […] And the VBS which is identical other than it lacks a hotkey. […] Closing as no bug.

09/25/08:

23:14 Ticket #539 (StringSplit w/ flag 2 doesn't return string if no delims) closed by Valik
Fixed: Fixed in version: 3.2.13.8
22:58 Ticket #531 (GuiCtrlSetGraphic documentation) closed by Valik
Fixed: Fixed in version: 3.2.13.8
22:08 Ticket #542 (StringRegEx causing a hard crash) closed by Valik
Fixed: Fixed in version: 3.2.13.8
10:52 Ticket #595 (Typo in help file.) closed by Gary
Fixed: Fixed in version: 3.2.13.8
08:17 Ticket #595 (Typo in help file.) created by ryantollefson
Under the "_WinAPI_SetWindowsHookEx" section (WinAPI Management) it …
07:34 Ticket #594 (wintitlematchmode) closed by Valik
Rejected: While in theory I can agree that specifying the match mode on a per-call basis would be superior, it's too late in the game for that. It's also a lot of work at this point for virtually no gain. Further, the match modes are largely redundant with the advanced window descriptions. For example, I believe that using the TITLE property is the same as doing an exact match (mode 3). Modes 1 and 2 can be achieved by the REGEXPTITLE depending on how you specify the pattern (it's not complex to do basic anchored/substring matching). Lastly you should be operating on HWND's as much as possible and not using anything else. I use the advanced descriptors in a call to WinGetHandle() to get the handle to the window which I use from then on. Basically, everything I just said also applies to controls.
06:08 Ticket #594 (wintitlematchmode) created by anonymous
This is really a two part request. I believe WinTitleMatchMode should …
05:58 Ticket #593 (Process Path) closed by Valik
Rejected: If somebody wishes to contribute a well-written function that would be fine. But since I don't see any submission attached I'm closing this. You should be able to get one of the functions working by making sure it's opening the process with the correct access rights. Chances are people have just been lazy and used the all-access rights which will fail if you are not an admin (which you won't be on Vista if it's set up).

09/24/08:

22:38 Ticket #593 (Process Path) created by daywalker_eg@…
I Hope You Add Function To Get Process Path In Vista Because All …
06:55 Ticket #575 (@ProgramFilesDir) closed by Jpm
No Bug: In Fact under Vista the return is independent from the Windows language version and can be use as such whatever that is not the value displayed by the explorer
00:02 Ticket #555 (bug in _GUICtrlListView UDF) closed by Gary
Works For Me: Closing as works for me.
00:01 Ticket #516 (_ChooseFont 64bit Vista) closed by Gary
Fixed: Fixed in version: 3.2.13.8

09/23/08:

00:54 Ticket #592 (a collection of prime based or prime related math functions) created by jennico
;#=#INDEX#============================================================= …

09/22/08:

17:49 Ticket #586 (Function _GuiCtrlListView_SetGroupInfo Don't Work Twice) closed by Valik
Fixed: Fixed in version: 3.2.13.8
01:53 Ticket #591 (_GUICtrlListBox_AddString goes loopy when passing array instead of string) closed by Valik
No Bug: Replying to Annonymous: > Valik once said that Autoit shouldn't hard crash under any circumstance. Indeed. In this case, though, it's technically not AutoIt's crash. The array is converted to a number and passed to SendMessage(). The message that's being used expects a string, so when it encounters a number it tries to do stuff and crashes. There isn't anything we can do about this. In certain cases (Using DllCall(), sending messages) it's up to the caller (you) to make sure you don't pass invalid data. No bug.
00:47 Ticket #591 (_GUICtrlListBox_AddString goes loopy when passing array instead of string) created by Annonymous
First of all, I know you aren't suppose to pass an array to the $sText …
00:36 Ticket #590 (AutoIT Script corrupting file names in script directory) closed by Valik
No Bug: Not enough information and the example script is way too long. Try asking for support on the forum to isolate the issue and determine if it's actually a bug.
00:09 Ticket #590 (AutoIT Script corrupting file names in script directory) created by asfarley@…
After I run my script, the names of the files in the same directory as …

09/21/08:

20:23 Ticket #550 (Run() - doc precision) closed by Valik
Rejected: I'm not sure how useful it is to document this. It wasn't really added to be useful for user's but rather for us in debugging. For now I think it should still be undocumented.
20:21 Ticket #565 (Calculate Membership in group or ranges) closed by Valik
Rejected: This should be possible via a COM object, 3rd-party tool or DllCall(). In other words it should be possible via a UDF of some sort. Closing as rejected.
20:20 Ticket #529 (Identifying .NET controls using WM_GETCONTROLNAME) closed by Valik
Rejected: Since you did figure out how to do it via I'm closing this as rejected.
20:19 Ticket #528 (Native Control Identification and Property Retrieval using Active ...) closed by Valik
Rejected: I believe that objects implementing accessibility functionality do so via a COM interface that is IDispatch enabled. In short, that means you should be able to, in some manner or other, access it via AutoIt's COM functionality. I don't see this being built-in.
20:07 Ticket #509 (UDP Receive String) closed by Valik
Rejected: You can just cast the returned data via String() and it will do the same thing your proposed flag would.
20:05 Ticket #548 (Array initializing syntax everywhere) closed by Valik
Rejected: It would be nice in some ways but I don't think it's worth the effort and the syntax issues it could cause.
20:03 Ticket #535 (don't pause the script when the tray menu is open or the gui title bar ...) closed by Valik
Rejected: There's really not much that can be done about this due to the way AutoIt is designed. You can avoid some of it by disabling the tray menu.
19:53 Ticket #587 (ControlGetPos array error) closed by Valik
No Bug: I agree with Saunder's assessment here. Also, I'm not really sure what the "SciTE help index" is so I really don't know what you have tried. Anyway, this is unlikely to be a real bug so I'm closing this.
19:51 Ticket #521 (Forum Upload Issue) closed by Valik
No Bug: You can view your attachments at this link. Otherwise, you'll have to bring the issue up with Jon on the forum because there's nothing anybody else can do to help you.
19:39 Ticket #574 (Problem with sending the Windows Key + L) closed by Valik
Fixed: Fixed in version: 3.2.13.8
19:10 Ticket #584 (Scite4AutoIt3 reports DLL error on start up) closed by Valik
No Bug: The latest versions of SciTE4AutoIt will not work on Windows 98. A version that came out around the time of 3.2.12.0 should still work on Windows 98.
18:54 Ticket #507 (Problem with GuiToolTip UDF functions using only TTM_*W message constants.) closed by Valik
No Bug: I just tested with AutoItMacroGenerator02.exe. It doesn't do what I said but it is doing something that I can't identify. Here are my observations: * I tested with 2 different programs that have a toolbar. When I press 1 or 2 when hovering over a toolbar button I get _1_ window (_ArrayDisplay()) showing me information on the button I'm hovering over. * When I do the same thing with AutoItMacroGenerator02.exe I get a lot of windows showing me information on every toolbar button. This says to me that AutoItMacroGenerator02.exe is doing something non-standard or something not compatible with the enumeration method you are trying to use. As best I can tell, this isn't a bug in AutoIt.
18:32 Ticket #583 (Using @MSEC produces an error) closed by Valik
Fixed: Fixed in version: 3.2.13.8
18:23 Ticket #589 (mixed compare result, bools and values.) closed by Valik
Fixed: Fixed in version: 3.2.13.8
17:51 Ticket #589 (mixed compare result, bools and values.) created by anonymous
[…]
02:19 Ticket #588 (StringRegExpReplaceCallback) created by RobSaunders
I know that it's annoying when people compare AutoIt to other …
01:38 Ticket #587 (ControlGetPos array error) created by anonymous
I am trying to use the ControlGetPos() but I am running into problems …

09/20/08:

19:34 Ticket #586 (Function _GuiCtrlListView_SetGroupInfo Don't Work Twice) created by TalivanIBM
This function works only one time, after one application don't work. …

09/19/08:

02:09 Ticket #585 (_Singleton with iFlag = 1 returns mutex handle on success) closed by Valik
Fixed: Fixed in version: 3.2.13.8

09/18/08:

23:37 Ticket #585 (_Singleton with iFlag = 1 returns mutex handle on success) created by wraithdu
The documentation says the return value of _Singleton is 1 when …

09/16/08:

22:49 Ticket #584 (Scite4AutoIt3 reports DLL error on start up) created by danuttall@…
I installed the latest version of Scite4AutoIt3 and tried to edit an …
20:09 Ticket #583 (Using @MSEC produces an error) created by dormmamu
Using the latest Beta v3.2.13.7 the recently added @MSEC macro …
17:28 Ticket #581 (DeAssign() ??) closed by Valik
Rejected: Once a variable exists in a scope, there is no way to remove that variable from a scope. You can clear the contents by assigning it an empty string but the variable will still exist. This will not be changed.
14:16 Ticket #582 (Tab Item on a Tab Control, Tips not showing) created by atc
I have a Tab control with several tabs on it. My aim is that a tip …
11:22 Ticket #581 (DeAssign() ??) created by anonymous
need DeAssign() func. […] HOW to destroy variable "test"? […] …

09/15/08:

18:00 Ticket #580 (ControlListView - Get Text under SysListView32) closed by Valik
No Bug: As I explained in the forum post: The list-view data is managed by the program itself (it has LVS_OWNERDATA set). That means data is not stored or accessed in the standard way. There is a second, different way to access the data and the code you are using does not try the alternate way. The control is what's called a "Virtual List-View" and you can find information on MSDN for how to work with it. This is not a bug, closing it as such.
02:00 Ticket #580 (ControlListView - Get Text under SysListView32) created by muskie88@…
ControlListView _GUICtrlListView_GetItemTextString …
Note: See TracTimeline for information about the timeline view.