Sign in to follow this  
Followers 0
Derk

Email script with the ability to choose the FROM and TO address.

6 posts in this topic

I have a script that sends an email using _INetSmtpMail but what i would like to do is create a GUI with two drop down lists and have the ability to choose the following.

1. FROM address

2.TO Adress.

#include <INet.au3>
#AutoIt3Wrapper_icon=alert.ico
$begin=MsgBox(0x4, "Emergency Alerts(UDI)", "Are you sure you want to proceed?")
if $begin = 7 then exit
$s_SmtpServer = "Mail1"
$s_FromName = "Emergency Alert (UDI)"
$s_FromAddress = alerts@domain.com
$s_ToAddress = "alerts@domain.com"
$s_Subject = "********* EMERGENCY ALERT *********"
Dim $as_Body[2]
$as_Body[0] = "Attention all employees. Office Alert,"
$as_Body[1] = "please proceed in an orderly  fashion to the safest exit. Thank you"
$Response = _INetSmtpMail ($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject, $as_Body, @ComputerName, -1);

Share this post


Link to post
Share on other sites



And what's your question?


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

I am not sure how to incorporate this into what i have now. I want to create a script the allows me to click a drop down list and choose the FROM and TO email addresses.

Share this post


Link to post
Share on other sites

Still no question. But I would suggest you read the GUI part of the AutoIt docu. This should give you a good start.


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

It ain't pretty, but it will get you started. Like water said, you need to do some reading in the help file. Also, search the forum for Koda. It is a graphical designer.

#AutoIt3Wrapper_icon=alert.ico
#include <INet.au3>
#include <GUIConstants.au3>
#include <array.au3>
 
#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 437, 175)
$Label1 = GUICtrlCreateLabel("From:", 16, 16, 30, 17)
$Combo1 = GUICtrlCreateCombo("", 16, 40, 305, 25)
GUICtrlSetData($Combo1, "Emergency Alert (UDI)&senderaddress1@domain.com|Emergency Alert (UDI)&senderaddress2@domain2.com", "Emergency Alert (UDI)&senderaddress1@domain.com")
$Label2 = GUICtrlCreateLabel("To:", 16, 88, 20, 17)
$Combo2 = GUICtrlCreateCombo("", 16, 112, 305, 25)
GUICtrlSetData($Combo2, "emailaddress1@domain.com|emailaddress2@domain2.com", "emailaddress1@domain.com")
$Button1 = GUICtrlCreateButton("Send", 336, 72, 75, 25, 0)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
 
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1
            _SendMail()
    EndSwitch
WEnd
 
Func _SendMail()
$temp = GUICtrlRead($Combo1)
$s_FromAddress = StringSplit($temp, "&")
_ArrayDisplay($s_FromAddress)
$begin=MsgBox(0x4, "Emergency Alerts(UDI)", "Are you sure you want to proceed?")
if $begin = 7 then exit
$s_SmtpServer = "Mail1"
;$s_FromName = "Emergency Alert (UDI)"
;$s_FromAddress = alerts@domain.com
;$s_ToAddress = "alerts@domain.com"
$s_Subject = "********* EMERGENCY ALERT *********"
Dim $as_Body[2]
$as_Body[0] = "Attention all employees. Office Alert,"
$as_Body[1] = "please proceed in an orderly  fashion to the safest exit. Thank you"
$Response = _INetSmtpMail ($s_SmtpServer, $s_FromAddress[1], $s_FromAddress[2], $s_ToAddress, $s_Subject, $as_Body, @ComputerName, -1);
EndFunc

#include <ByteMe.au3>

Share this post


Link to post
Share on other sites

#6 ·  Posted (edited)

this is one i use, it allows for compessing files and then will send them as an attachment to a given email address from which ever email you put down...

Will need tweaking to fit your needs.. but works well...

;#AutoIt3Wrapper_icon=Icons\email.ico
;  idea from
; http://www.autoitscript.com/forum/topic/23860-smtp-mailer-that-supports-html-and-attachments/
;##################################
; Include
;##################################
#Include<file.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
;##################################
; Variables
;##################################
FileCopy("C:\Save\*.*", @ScriptDir & "\Resumes_&_Cover_Letters")
Global $PIC_GUI_3 = @ScriptDir & '\Tech.bmp'
Local  $GUI_SS_DEFAULT_PIC
Local $oIE, $GUIActiveX, $email2, $GUI_Button_File, $GUI_Button_send, $GUI_Button_Home
    Local $msg, $iItems, $aDrive, $aButtons, $oHTTP, $email21
 
    $oIE = ObjCreate("Shell.Explorer.2")
    ; Create a simple GUI for our output
    GUICreate("Email Sender", 640, 580, (@DesktopWidth - 640) / 2, (@DesktopHeight - 580) / 2, BitOR($WS_OVERLAPPEDWINDOW, $WS_CLIPSIBLINGS, $WS_CLIPCHILDREN))
GUISetBkColor(0x0000FF)
GUICtrlCreatePic($PIC_GUI_3,0,0,800,600, BitOR($GUI_SS_DEFAULT_PIC, $WS_CLIPSIBLINGS))
$GUIActiveX = GUICtrlCreateObj ($oIE, -215, 0, 855, 550)
    $email2 = GUICtrlCreateButton("Email Address To Send To", 10, 555, 180, 20)
    ;$GUI_Button_CD = GUICtrlCreateButton("CD", 95, 560, 80, 20)
    $GUI_Button_File = GUICtrlCreateButton("Attach File/s", 200, 555, 135, 20)
    $GUI_Button_Home = GUICtrlCreateButton("Home", 345, 555, 135, 20)
    $GUI_Button_send = GUICtrlCreateButton("Send && Exit", 495, 555, 135, 20)
    GUISetState()      ;Show GUI
    $oIE.navigate(@ScriptDir & "\Resumes_&_Cover_Letters")
 
    ; Waiting for user to close the window
    While 1
        $msg = GUIGetMsg()
        Select
   Case $msg = $GUI_EVENT_CLOSE
FileDelete("C:\temp\resume\*.*")
FileDelete("C:\temp\resume\7za.exe")
FileDelete("C:\temp\*.*")
DirRemove("C:\temp\", 1)
                ExitLoop
            Case $msg = $email2
               $email21=InputBox("Email", "Enter Email Address To Send To", "")
            Case $msg = $GUI_Button_File
               DirCreate("C:\temp\resume")
      Send("^c")
      $oIE.navigate("C:\temp\resume")
      Send("^v")
      FileCopy(@ScriptDir & "\7zip\7za.exe", "C:\temp\*.*")
ShellExecuteWait(@ScriptDir & "\7zip\testing.exe")
      $oIE.navigate(@ScriptDir & "\Resumes_&_Cover_Letters")
            Case $msg = $GUI_Button_Home
                $oIE.navigate(@ScriptDir & "\Resumes_&_Cover_Letters")
            Case $msg = $GUI_Button_send
                ExitLoop
        EndSelect
    WEnd
    GUIDelete()
 
;###FILL IN THIS INFO###
;$Name = InputBox("Email", "Enter Your Name", "")
;$User = InputBox("Email", "Enter Username", "")
;$Pass = InputBox("Email", "Enter Password", "", "*")
$email1 = InputBox("Email", "Enter Your Email Address", "")
$email2 = InputBox("Email", "Enter Email Address To Send To", "")
;$Subject = InputBox("Email", "Enter The Subject", "")
 
$SmtpServer = "smtp.aol.com";             ; address for the smtp-server to use - REQUIRED
$FromName = "-NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY- -NEOMA NO REPLY--NEOMA NO REPLY- -NEOMA NO REPLY-";($Name)                     ; name from who the email was sent
$FromAddress = ($email1) ; address from where the mail should come
$ToAddress = ($email21)   ; destination address of the email - REQUIRED
$Subject = "Here's Your Email";($Subject)                  ; subject from the email - can be anything you want it to be
$Body = "Heres Your Files..."                             ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:\temp\Your_Files.zip"                    ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""    ; address for cc - leave blank if not needed
$BccAddress = "";""  ; address for bcc - leave blank if not needed
$Importance = "Normal"                ; Send message priority: "High", "Normal", "Low"
$Username = "username";($User)                  ; username for the account used from where the mail gets sent - REQUIRED
$Password = "************";($Pass)               ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 587;26                            ; port used for sending the mail
$ssl = 0                                ; enables/disables secure socket layer sending - put to 1 if using httpS
;~ $IPPort=465                        ; GMAIL port used for sending the mail
;~ $ssl=1                              ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS
;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl)
If @error Then
;   MsgBox(0, "Error sending message", "Error code:" & @error & "  Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 993, $ssl = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~        ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
FileDelete("C:\temp\resume\*.*")
FileDelete("C:\temp\resume\7za.exe")
FileDelete("C:\temp\*.*")
DirRemove("C:\temp\", 1)
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 then $IPPort = 25
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    If $ssl Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    EndIf
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail=""
FileDelete("C:\temp\resume\*.*")
FileDelete("C:\temp\resume\7za.exe")
FileDelete("C:\temp\*.*")
DirRemove("C:\temp\", 1)
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc
;----------------------------- End _Email_Sender -----------------------------------------
Edited by bb01

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0