Jump to content

Recommended Posts

Hi there

I just downloaded the 3.3.8.0, uninstalled all previous installed AutoIt Versions and installed the new 3.3.8.0!

Now I just have a problem using all SQLite commands.

The SQLite_Startup fails, because it can't find any DLL.

In the SQLite.dll.au3 there is no data for a DLL.

Am I missing something?

What do I have to do that I can use the SQLite commands again?

(Sorry for my bad english)

Thanks in advance

Veronesi

; -----------------------------------------

Edit: I added SQLite to the title so the right people will look at the topic. M23

Edited by Melba23
Title clarity
Link to post
Share on other sites

IIRC there was a discussion about SQLite and 3.3.8.0. You have to download SQLite yourself.

I will post the link as soon as I find the thread.

Edit:

Edited by water

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2021-06-05 - Version 1.5.4.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2021-06-14 - Version 1.6.5.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki, WebDriver - Wiki

 

Link to post
Share on other sites

No use the 32-bit version (sqlite3.dll) for x86 builds, the 64-bit version (sqlite3_x64.dll) for x64 builds.

You can download the up-to-date DLLs from the AutoIt download directory for SQLite.

Edit:

There are currently two SQLite DLL releases in the repository. One is v3.7.2 without FTS and RTREE support compiled. The other is the latest 3.7.9 with both FTS and RTEE support. The files without an explicit version number are copies of this latest version (now 3.7.9).

For those who wonder which SQLite version to download and use, here's what I recommend: get the copies without version number, they are up-to-date and include these useful extensions.

Download only once the 32- and/or 64-bit DLL depending on your intention to use x86 and/or x64 and store it/them in a fixed place.

Then pass the DLL name to _SQLite_Startup and set ForceLocal to 1. That will make you sure that you use the right DLL and also will prevent any downloading of the obsolete and less complete 3.7.2 version. The reason is that the automated download targets v3.7.2 file(s) instead of the copy without version string.

That should work (I don't have the possibility to test it right now).

FileInstall the DLL if you need to distribute the application to avoid loading the repository.

Edited by jchd

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Link to post
Share on other sites

I've just edited my post above while you replied!

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Link to post
Share on other sites
  • 2 weeks later...

I had this problem :

C:\Program Files (x86)\AutoIt3\Beta\Includesqlite.au3(2,13) : ERROR: missing separator character after keyword.

#IgnoreFunc __SQLite_Inline_Version

in a old program when i tried to compile with V 3.3.8 .

But the only way I resolved is to move the #include <SQLite.au3> in the first position among my includes:

#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Icon=Iconeairelemental.ico
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
; aRIA  -> a.dvanced R.apporto I.nterventi A.genti
#include <SQLite.au3>   ; this include and..
#include <SQLite.dll.au3>  ; and this moved here from version 3.3.8
;include da Koda
#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GuiListView.au3>
;include da NSC
;#include <SQLite.au3>   ; this include and..
;#include <SQLite.dll.au3>  ; and this moved UP from version 3.3.8
#include <date.au3>
#include <GuiTab.au3>
#include <Google Maps.au3>
#include <INet.au3>
#include <DateTimeConstants.au3>
#include <_SQL.au3>   ; lo uso per la prima volta nella funzione importautenti()
#include <GuiDateTimePicker.au3> ;uso anche le ore/minuti negli interventi

why ? why? why?

Link to post
Share on other sites

The SQLite UDF is not the culprit here.

The issue is with ExitLoop at line 7112 of GuiListView. Due to a bug already reported (#2073) you need to insert any dummy instruction there.

For instance, insert "Local $Dummy" at line 7113 of GuiListView.au3

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By t0nZ
      Code to read a Spiceworks Database and export text data files in INI format.
      Focused on exporting data about PC inventory and useful to migrate to another inventory system.
      Tested with a SQLite DB from Spiceworks latest (and LAST on premise) version - (7.5.00107.30 ott 2019)
      It creates one  text file for every single machine.
       
      ;Spiceworks Db Exporter ; ;- NSC - t0nZ 2021 ;code to read a Spiceworks Database and export text data files in INI format. ;focused on exporting data about PC inventory. ;useful to migrate to another inventory system. ;tested with a SQLite DB from Spiceworks latest (and LAST on premise) version - (7.5.00107.30 ott 2019) ;It creates one text files for every single machine. ; --> please adapt paths to your environment. #include <SQLite.au3> #include <String.au3> #include <File.au3> dataINIfromDBspiceworks() #Region spiceworks immport Func dataINIfromDBspiceworks() ConsoleWrite("start import from db Spiceworks" & @CRLF) Local $dbspicepath = "C:\scambio" Local $dbspice = "spiceworks_prod.db" ; =====================>>>>> START SQL DLL _SQLite_Startup() ;======================<<<<<<<<<<<<<<<<<<< _SQLite_Open($dbspicepath & '\' & $dbspice) ;- Local $aCPdata Local $hQuery Local $recordcount = 0 Local $salvarec = 0 ;------------------------------------------------ Local $spiceQuery = "SELECT serial_number," & _ "server_name," & _ "manufacturer," & _ "(model || '-' || raw_model)," & _ "processor_type," & _ "raw_processor_type," & _ "processor_architecture," & _ "raw_processor_type," & _ "number_of_processors," & _ "'speed'," & _ "CAST (memory AS FLOAT) / 1073741824," & _ "current_user," & _ "domain," & _ "network_adapters.dns_domain," & _ "'logon'," & _ "operating_system," & _ "os_architecture," & _ "version," & _ "'lang'," & _ "('C:;Fixed;' || (CAST (disks.size AS FLOAT) / 1048576) || ';' || (CAST (disks.free_space AS FLOAT) / 1048576) )," & _ "devices.ip_address," & _ "'(0.0.0.0)'," & _ "'(0.0.0.0)'," & _ "'(0.0.0.0)'," & _ "'(0.0.0.0)'," & _ "network_adapters.gateway," & _ "(network_adapters.description ||' - '|| network_adapters.name)," & _ "devices.mac_address," & _ "devices.updated_on," & _ "user_tag " & _ "FROM devices " & _ "inner JOIN " & _ "network_adapters ON network_adapters.computer_id = devices.id " & _ "inner JOIN " & _ "disks ON disks.computer_id = devices.id " & _ "WHERE disks.name = 'C:' " & _ "ORDER BY devices.updated_on DESC;" _SQLite_Query(-1, $spiceQuery, $hQuery) While _SQLite_FetchData($hQuery, $aCPdata) = $SQLITE_OK writeINI($aCPdata) $recordcount += 1 If $recordcount = $salvarec + 10 Then $salvarec = $recordcount ConsoleWrite($recordcount & " processed records " & @CRLF) EndIf WEnd ;________________________________________________ _SQLite_Close() _SQLite_Shutdown() EndFunc ;==>dataINIfromDBspiceworks Func writeINI($aCPdata) Local $folderdataINI = "c:\scambio\ini" If Not FileExists($folderdataINI) Then DirCreate($folderdataINI) $aCPdata[28] = StringRegExpReplace($aCPdata[28], "[\D]", "") ; this "2021-04-17 02:34:16" to that "20210417023416 Local $cpini = $folderdataINI & "\" & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini" If FileExists($folderdataINI & "\" & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini") Then FileDelete($folderdataINI & "\" & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini") ; deleted previous files ! ConsoleWrite("deleted: " & "cp_" & $aCPdata[28] & "_" & $aCPdata[0] & "_.ini" & @CRLF) EndIf ;Section Unique :serial, computer name Local $aSectionUnique[2][2] = [["serial", $aCPdata[0]], ["computername", $aCPdata[1]]] IniWriteSection($cpini, "UNIQUE", $aSectionUnique, 0) ;Section Machine :manufacturer,model,cpuname,cpuid,cpuarc,cpuvendor,cpucores,cpuspeed,RAM,disk1capacity,disk1used Local $aSectionMachine[9][2] = [["manufacturer", $aCPdata[2]], ["model", $aCPdata[3]], ["cpuname", $aCPdata[4]], ["cpuid", $aCPdata[5]], ["cpuarc", $aCPdata[6]], ["cpuvendor", $aCPdata[7]], ["cpucores", $aCPdata[8]], ["cpuspeed", $aCPdata[9]], ["ram", $aCPdata[10]]] IniWriteSection($cpini, "MACHINE", $aSectionMachine, 0) ;Section User : username,domain,DNSdomain,logonServer Local $aSectionUser[4][2] = [["username", $aCPdata[11]], ["domain", $aCPdata[12]], ["DNSdomain", $aCPdata[13]], ["logonServer", $aCPdata[14]]] IniWriteSection($cpini, "USER", $aSectionUser, 0) ;Section OS : OSver, OSarch, OSbuild, OSlang Local $aSectionOS[4][2] = [["OSver", $aCPdata[15]], ["OSarch", $aCPdata[16]], ["OSbuild", $aCPdata[17]], ["OSlang", $aCPdata[18]]] IniWriteSection($cpini, "OS", $aSectionOS, 0) ;Section Disks: username,domain,DNSdomain,logonServer Local $aSectionDrives[1][2] = [["drives", $aCPdata[19]]] IniWriteSection($cpini, "DRIVES", $aSectionDrives, 0) ;Section network:localIP1,localIP2,localIP3,localIP4,publicIP,GW,adapter,mac Local $aSectionNetwork[8][2] = [["localIP1", $aCPdata[20]], ["localIP2", $aCPdata[21]], ["localIP3", $aCPdata[22]], ["localIP4", $aCPdata[23]], ["publicIP", $aCPdata[24]], ["GW", $aCPdata[25]], ["adapter", $aCPdata[26]], ["mac", $aCPdata[27]]] IniWriteSection($cpini, "NETWORK", $aSectionNetwork, 0) ;Section PLUS :date, groupid Local $aSectionPlus[2][2] = [["date", $aCPdata[28]], ["groupid", $aCPdata[29]]] IniWriteSection($cpini, "PLUS", $aSectionPlus, 0) EndFunc ;==>writeINI #EndRegion spiceworks import  
      Spiceworks on premise, now pretty abadonware, has a non crypted SQLite DB usually located in:
      c:\Program Files (x86)\Spiceworks\db\spiceworks_prod.db The query was the difficult part (at least for me), and I export in INI format because it was part of my effort to migrate from Spiceworks to a custom made system (Computer Plucker see this post) where I already parse .INI files in a custom MySQL and/or SQLite DB.
       
    • By benners
      I am trying to normalise a database to remove duplicate info. I am using SQLite Expert to design the database and test sql queries.
      The database is going to store information about setup installers, such as paths, installer specific info, users to install for, type and category of installer blah, blah.
      I have attached the database thus far and the tables function are as follows:-
      category - stores text describing the general usage the installer comes under, such as Browser, Compression etc. installer - this is the main table that has relationships with the other tables and stores info about the installer file, install order etc. installer_user - a link table. Stores the user or computer to install the program for or on. package - stores the type of installer, NSIS, Inno  Nullsoft etc. platform - the OS architecture the installer file is compiled for. postinstall - a list of activities to perform when the main install has finished. postinstall_user - a link table. Stores the users\computers that are allowed to run the post install actions user - a list of computers or usernames. I might separate into two tables, undecided yet. Now there wil be one program that deals with the installation side and another that acts as a front end for editing the database suchs as adding new files, removing old files etc.
      The idea with the editing side is to be able to delete an installer from the installer table say with the id of 1 and all other pertinent information in the other tables will also be deleted. The same goes for deleting a user. All the fields relating to that user will be removed.
      I have managed to get that part working for the most part. If I delete either a user or installer, the related info in the installer_user and postinstall tables are removed but since I added the postinstall_user table to link usernames to the postinstall action, this is where I get the foreign key error. If someone can explain why, I am sure it is an obvious reason for someone who knows what they are doing 😄
      Cheers
      Installer - Copy.db
    • By dmob
      So I am trying to implement an archive system of sorts for my (SQLite) DB app. I wrote a function to attach a separate (archive) DB and
      sync the columns with main DB. If archive DB file does not exist, create file with _SQLiteOpen then close the file (and thus connection) with SQLite_Close.
      This works as intended, however, after the create operation, all subsequent _SQLite_* functions returned a "Library misuse error".
      After a little digging I found the problem in the _SQLite_Close function: it clears the "last opened database" handle even when there still is a live
      DB connection open. All other functions then "think" there is no DB connection active. I hacked two functions in the UDF for a quick fix:

      In _SQLite_Close: Change
      ... $__g_hDB_SQLite = 0 __SQLite_hDel($__g_ahDBs_SQLite, $hDB) Return $iRval[0] to:
      $__g_hDB_SQLite = __SQLite_hDel($__g_ahDBs_SQLite, $hDB) Return $iRval[0] and in Func __SQLite_hDel changed
      Func __SQLite_hDel(ByRef $ahLists, $hGeneric) Local $iElement = _ArraySearch($ahLists, $hGeneric) If $iElement > 0 Then _ArrayDelete($ahLists, $iElement) EndFunc ;==>__SQLite_hDel to:
      Func __SQLite_hDel(ByRef $ahLists, $hGeneric) Local $iElement = _ArraySearch($ahLists, $hGeneric) If $iElement > 0 Then _ArrayDelete($ahLists, $iElement) Return $ahLists[UBound($ahLists)-1] ; Return last opened db EndIf Return 0 EndFunc ;==>__SQLite_hDel so it preserves last opened DB again.
       
      My archive function now works great
      I'm not sure if this should be classified as a bug, but I believe so...
      Hope this helps someone before
    • By argumentum
      #include <SQLite.au3> ;-- When SQLite is compiled with the JSON1 extensions it provides builtin tools ;-- for manipulating JSON data stored in the database. ;-- This is a gist showing SQLite return query as a JSON object. ;-- https://www.sqlite.org/json1.html Example() Func Example() _SQLite_Startup() ; "<your path>\sqlite3.dll", False, 1) ; https://www.autoitscript.com/autoit3/docs/libfunctions/_SQLite_Startup.htm _SQLite_Open() ; ...if you can not run this due to errors, get the latest DLL from https://www.sqlite.org/ If _SQLite_Exec(-1, "CREATE TABLE users (id INTEGER PRIMARY KEY NOT NULL, full_name TEXT NOT NULL, email TEXT NOT NULL, created DATE NOT NULL );") Then Return 4 If _SQLite_Exec(-1, 'INSERT INTO users VALUES ' & _ '(1, "Bob McFett", "bmcfett@hunters.com", "32-01-01"),' & _ '(2, "Angus O''Vader","angus.o@destroyers.com", "02-03-04"),' & _ '(3, "Imperator Colin", "c@c.c", "01-01-01");') Then Return 5 ; -- Get query data as a JSON object using the ; -- json_group_object() [1] and json_object() [2] functions. _SQLite_GetTable2d_ArrayToConsole("SELECT" & _ " json_group_object(" & _ " email," & _ " json_object('full_name', full_name, 'created', created)" & _ " ) AS json_result" & _ " FROM (SELECT * FROM users WHERE created > ""02-01-01"");") ; {"bmcfett@hunters.com":{"full_name":"Bob McFett","created":"32-01-01"},"angus.o@destroyers.com":{"full_name":"Angus O'Vader","created":"02-03-04"}} ; -- Get query data as a JSON object using the ; -- json_group_array() function to maintain order. _SQLite_GetTable2d_ArrayToConsole("SELECT" & _ " json_group_array(" & _ " json_object('full_name', full_name, 'created', created)" & _ " ) AS my_json_result_OrAnythingReally" & _ " FROM (SELECT * FROM users ORDER BY created);") ; [{"full_name":"Imperator Colin","created":"01-01-01"},{"full_name":"Angus O'Vader","created":"02-03-04"},{"full_name":"Bob McFett","created":"32-01-01"}] ;-- Links ;-- [1] https://www.sqlite.org/json1.html#jgroupobject ;-- [2] https://www.sqlite.org/json1.html#jobj ; example found at https://gist.github.com/akehrer/481a38477dd0518ec0086ac66e38e0e2 EndFunc ;==>Example Func _SQLite_GetTable2d_ArrayToConsole($sSQL, $hDB = -1) Local $aResult, $iRows, $iColumns If _SQLite_GetTable2d($hDB, $sSQL, $aResult, $iRows, $iColumns) Then ConsoleWrite("! SQLite Error: " & _SQLite_ErrCode($hDB) & @CRLF & "! " & _SQLite_ErrMsg($hDB) & @CRLF) Else _SQLite_Display2DResult($aResult) EndIf ConsoleWrite(@CRLF) EndFunc ;==>_SQLite_GetTable2d_ArrayToConsole Based on this example, you can build your own query. 
      The code has all the explanations.
      Enjoy  
    • By argumentum
      #include <SQLite.au3> ;~ #include <SQLite.dll.au3> Local $hQuery, $aRow, $aNames _SQLite_Startup() ConsoleWrite("_SQLite_LibVersion=" & _SQLite_LibVersion() & @CRLF) _SQLite_Open() ; open :memory: Database _SQLite_Exec(-1, "CREATE TABLE aTest (A,B int not null unique ,C text);") _SQLite_Exec(-1, "INSERT INTO aTest(a,b,c) VALUES ('c','2','World');") _SQLite_Exec(-1, "INSERT INTO aTest(a,b,c) VALUES ('b','3',' ');") _SQLite_Exec(-1, "INSERT INTO aTest(a,b,c) VALUES ('a','1','Hello');") _SQLite_Query(-1, "SELECT _ROWID_,* FROM aTest ORDER BY a;", $hQuery) _SQLite_FetchTypes($hQuery, $aNames) ; Read out Column Types ConsoleWrite(StringFormat(" %-10s %-10s %-10s %-10s ", $aNames[0], $aNames[1], $aNames[2], $aNames[3]) & @CRLF) _SQLite_FetchNames($hQuery, $aNames) ; Read out Column Names ConsoleWrite(StringFormat(" %-10s %-10s %-10s %-10s ", $aNames[0], $aNames[1], $aNames[2], $aNames[3]) & @CRLF) While _SQLite_FetchData($hQuery, $aRow) = $SQLITE_OK ConsoleWrite(StringFormat(" %-10s %-10s %-10s %-10s ", $aRow[0], $aRow[1], $aRow[2], $aRow[3]) & @CRLF) WEnd _SQLite_Exec(-1, "DROP TABLE aTest;") _SQLite_Close() _SQLite_Shutdown() ; Output: ; INTEGER int text ; rowid A B C ; 3 a 1 Hello ; 2 b 3 ; 1 c 2 World Func _SQLite_FetchTypes($hQuery, ByRef $aTypes) Dim $aTypes[1] If __SQLite_hChk($hQuery, 3, False) Then Return SetError(@error, 0, $SQLITE_MISUSE) Local $avDataCnt = DllCall($__g_hDll_SQLite, "int:cdecl", "sqlite3_column_count", "ptr", $hQuery) If @error Then Return SetError(1, @error, $SQLITE_MISUSE) ; DllCall error If $avDataCnt[0] <= 0 Then Return SetError(-1, 0, $SQLITE_DONE) ReDim $aTypes[$avDataCnt[0]] Local $avColName For $iCnt = 0 To $avDataCnt[0] - 1 $avColName = DllCall($__g_hDll_SQLite, "wstr:cdecl", "sqlite3_column_decltype16", "ptr", $hQuery, "int", $iCnt) If @error Then Return SetError(2, @error, $SQLITE_MISUSE) ; DllCall error $aTypes[$iCnt] = $avColName[0] Next Return $SQLITE_OK EndFunc ;==>_SQLite_FetchTypes  If you wanna build a proper JSON string, you may want to know if is {"int":123} or {"text":"123"}
      and for that, this can help, obviously only when declared in the SQLite table.
×
×
  • Create New...