Jump to content
Sign in to follow this  
ozmike

HotKeySetEx.UDF Mouse hot keys for autoit

Recommended Posts

Hi 

Here is a UDF which has the much requested hotkeys for mouse clicks. Autoit's hotkeyset doesn't support mouse clicks. one of the main differences with AHK (i think). 

; This UDF extends AutoIT HotKeySet by adding the much requested Mouse Button Clicks

; HotKeySet (autoIT) only does KEYBOARD
; HotKeySetEx Does both KEYBOARD and MOUSE!

simple interface

HotKeySetEx("{RCLICK}", "myfun") ; Right Click mouse hot key
HotKeySetEx("{RDCLICK}", "myfun") ; Right double click mouse hot key
HotKeySetEx("{F1}", "myfun") ; normal hot key
; new function call replaces @HotKeyPressed
;   getLastHotKey() =  eg {RCLICK} or {F1}

See MouseTrapEvent for supported events.

;                   single clicks
;                   LClick - left button click (Primary)
;                   MClick - middle button click (Wheel click)
;                   RClick - right button click (Secondary)
;                   XClick1 - Xtra button 1 click (usually 'back navigaton')
;                   XClick2 - Xtra button 2 click (usually 'forward navigaton')

;                   double clicks 
;                   LDClick - left button (Primary)
;                   MDClick - middle button  (Wheel click)
;                   RDClick - right button  (Secondary)
;                   XDClick1 - Xtra button 1  (usually 'back navigaton')
;                   XDClick2 - Xtra button 2  (usually 'forward navigaton')

;                   psuedo double clicks ('chords') -
;                   XClick12 - Xtra button 1&2 pressed at the same time.
;                   
;                   OTHER EVENTS you'll have to work out yourself eg mouse wheel scroll - see code.

This UDF is based on MouseTrapEvent which is based on MouseSetEvent. 

New events for scroll and drag could be added see MouseTrapEvent code.

enjoy 

Version two fixed left and middle double, click. Note there is a bug if you set a double click, you should set a single click as it get blocked (my apols).

HotKeySetExV2.zip

HotKeySetEx.zip

Edited by ozmike

Share this post


Link to post
Share on other sites

ozmike,

In future please do not spam the forum with links to your new UDF - particularly when all but one of the threads in which you posted dated from 5 years ago or more. I have deleted all but the most recent. :naughty:

And do not bother to argue - this has been the policy here since before I joined. ;)

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Hi 

Here is a UDF which has the much requested hotkeys for mouse clicks. Autoit's hotkeyset doesn't support mouse clicks. one of the main differences with AHK (i think). 

; This UDF extends AutoIT HotKeySet by adding the much requested Mouse Button Clicks

; HotKeySet (autoIT) only does KEYBOARD
; HotKeySetEx Does both KEYBOARD and MOUSE!

simple interface

HotKeySetEx("{RCLICK}", "myfun") ; Right Click mouse hot key
HotKeySetEx("{RDCLICK}", "myfun") ; Right double click mouse hot key
HotKeySetEx("{F1}", "myfun") ; normal hot key
; new function call replaces @HotKeyPressed
;   getLastHotKey() =  eg {RCLICK} or {F1}

See MouseTrapEvent for supported events.

;                   single clicks
;                   LClick - left button click (Primary)
;                   MClick - middle button click (Wheel click)
;                   RClick - right button click (Secondary)
;                   XClick1 - Xtra button 1 click (usually 'back navigaton')
;                   XClick2 - Xtra button 2 click (usually 'forward navigaton')

;                   double clicks 
;                   LDClick - left button (Primary)
;                   MDClick - middle button  (Wheel click)
;                   RDClick - right button  (Secondary)
;                   XDClick1 - Xtra button 1  (usually 'back navigaton')
;                   XDClick2 - Xtra button 2  (usually 'forward navigaton')

;                   psuedo double clicks ('chords') -
;                   XClick12 - Xtra button 1&2 pressed at the same time.
;                   
;                   OTHER EVENTS you'll have to work out yourself eg mouse wheel scroll - see code.

This UDF is based on MouseTrapEvent which is based on MouseSetEvent. 

New events for scroll and drag could be added see MouseTrapEvent code.

enjoy 

holy f**k your'e my savior men ill try this, hope to see more udf from you thanks..


ill get to that... i still need to learn and understand a lot of codes graduated.gif

Correct answer, learn to walk before you take on that marathon.

Share this post


Link to post
Share on other sites

holy f**k your'e my savior men ill try this, hope to see more udf from you thanks..

It appears the user has just taken UDFs by other authors and merged together. It would have been polite if they had linked back to the original threads.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan_555
      Hi, 
      here is a configurable HotKey Gui script, which i wrote for my current Project:
      #include <Array.au3> #include <ComboConstants.au3> #include <GuiComboBox.au3> #include <GUIConstantsEx.au3> #include <String.au3> #include <WindowsConstants.au3> #include <Array.au3> Global $snip_inifile = @ScriptDir & "\" & "hotkeygui.ini" ;If $HKSTRING is changed, make sure to adjust the $z number in the SetHotkeyKeys function. Local $HKSTRING = "[;][#;Win][!;Alt][+;Shift][^;Ctrl][0;0][1;1][2;2][3;3][4;4][5;5][6;6][7;7][8;8][9;9][a;a][b;b][c;c][d;d][e;e][f;f][g;g][h;h][i;i][j;j][k;k][l;l][m;m][n;n][o;o][p;p][q;q][r;r][s;s][t;t][u;u][v;v][w;w][x;x][y;y][z;z][{PAUSE};Pause][{BREAK};Break][{HOME};Home/Pos1][{END};END][{PGUP};Page UP][{PGDN};Page Down][{F1};F1][{F2};F2][{F3};F3][{F4};F4][{F5};F5][{F6};F6][{F7};F7][{F8};F8][{F9};F9][{F10};F10][{F11};F11][{F12};F12][{SPACE};Space]" Local $HKT = _StringBetween($HKSTRING, "[", "]") Global $HK, $HKS Global $h_HotkeyTestInput Dim $HK[0][2] ;Hotkey keys+names Dim $HKS[6] ;Hotkey (ini)settings 0-3 combo boxes, 4 = Redirect the hotkey test to the input box, 5=Current Hotkey Set. For $x = 0 To UBound($HKT) - 1 ;Make an array including the text from HKSTRING _ArrayAdd($HK, $HKT[$x], 0, ";") Next $HKT = "" $HKSTRING = "" SetHotkeyKeys(0) ;Set the initial hotkey SetHotkeyKeys(1) ;Open the config-gui while 1 ;Test the hotkey. Output is in the console. Exit through traymenue. sleep (10) WEnd Func SetHotkeyKeys($showgui = 0) ;$showgui 0 = Set the saved hotkeys, 1 = Show gui to change the settings Local $a, $b, $c, $z $z=4 ;$z of the text from $HK will go in to c1-c3, the rest goes to c4 $HKS[0] = IniRead($snip_inifile, "hotkey", "0", "4") $HKS[1] = IniRead($snip_inifile, "hotkey", "1", "0") $HKS[2] = IniRead($snip_inifile, "hotkey", "2", "0") $HKS[3] = IniRead($snip_inifile, "hotkey", "3", "12") $HKS[4] = 0 $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z + 1][0] If $showgui = 1 Then $HKS[4] = 1 #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Hotkey Config", 317, 79, -1, -1, $WS_POPUP + $WS_CAPTION) $C1 = GUICtrlCreateCombo("", 4, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C2 = GUICtrlCreateCombo("", 82, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C3 = GUICtrlCreateCombo("", 161, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $C4 = GUICtrlCreateCombo("", 239, 50, 72, 25, BitOR($CBS_DROPDOWNLIST, $CBS_AUTOHSCROLL)) $Label1 = GUICtrlCreateLabel("Please set a hotkey to use. Note: Not all combos may work.", 4, 30, 300, 17) $Button1 = GUICtrlCreateButton("Set + Save", 4, 4, 70, 23) $h_HotkeyTestInput = GUICtrlCreateInput("Test", 82, 5, 150, 21) $Button2 = GUICtrlCreateButton("Exit", 239, 5, 72, 23) _GUICtrlComboBox_SetMinVisible($C4, 60) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### For $x = 0 To UBound($HK) - 1 If $x <= $z Then _GUICtrlComboBox_AddString($C1, $HK[$x][1]) _GUICtrlComboBox_AddString($C2, $HK[$x][1]) _GUICtrlComboBox_AddString($C3, $HK[$x][1]) Else _GUICtrlComboBox_AddString($C4, $HK[$x][1]) EndIf Next _GUICtrlComboBox_SetCurSel($C1, $HKS[0]) _GUICtrlComboBox_SetCurSel($C2, $HKS[1]) _GUICtrlComboBox_SetCurSel($C3, $HKS[2]) _GUICtrlComboBox_SetCurSel($C4, $HKS[3]) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE, $Button2 GUIDelete($Form1) ExitLoop Case $Button1 $HKS[0] = _GUICtrlComboBox_GetCurSel($C1) ;Read the combo - boxes $HKS[1] = _GUICtrlComboBox_GetCurSel($C2) $HKS[2] = _GUICtrlComboBox_GetCurSel($C3) $HKS[3] = _GUICtrlComboBox_GetCurSel($C4) HotKeySet($HKS[5]) ;Clear the Old Hotkey $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z +1][0] ;Assemble the hotkey string, use $z+1 ! If HotKeySet($HKS[5], "DoHotkey") = 0 Then MsgBox(0, "Hotkey", "Err: Could not set. " & $HKS[5]) ;Set the hotkey or display a message IniWrite($snip_inifile, "hotkey", "0", $HKS[0]) ;Save the hotkey to the ini file IniWrite($snip_inifile, "hotkey", "1", $HKS[1]) IniWrite($snip_inifile, "hotkey", "2", $HKS[2]) IniWrite($snip_inifile, "hotkey", "3", $HKS[3]) EndSwitch WEnd EndIf If $HKS[4] = 0 Then ;Function was called with 0 $HKS[5] = $HK[$HKS[0]][0] & $HK[$HKS[1]][0] & $HK[$HKS[2]][0] & $HK[$HKS[3] + $z + 1][0] If HotKeySet($HKS[5], "DoHotkey") = 0 Then MsgBox(0, "Hotkey", "Err: Could not set. " & $HKS[5]) Else $HKS[4] = 0 EndIf EndFunc ;==>SetHotkeyKeys Func DoHotkey() If $HKS[4] = 0 Then ;Main function ConsoleWrite("PRESS" & @CRLF) Else ;Gui test code: GUICtrlSetData($h_HotkeyTestInput, "Hotkey ! " & @hour & ":" & @min & ":" & @SEC) EndIf EndFunc ;==>DisplayActiveProcess This script uses only 1 hotkey, and saves it  into an ini file.
      To load and use the saved Hotkey from the ini use: SetHotkeyKeys(0) 
      And to open the configuration window, use SetHotkeyKeys(1). 
      Have fun.
    • By Jamestay97
      Hello! Thanks you for looking at my post
      **No source code I'm sorry work related can't copy information**
      I've been using autoit for about 1 year. 
      I'm having trouble automating a click on an internet explorer web page and I've tried a lot of examples from help pages and forums already. The object I'm trying to click on isnt always in the same spot so I can't use mouse click or control click, I have tried to use the different get collection options and clickbyname, or index or get object. I'm just struggling. 
      Description of object I'm trying to click -- 
      HTML Code looks like <a ng-click.. "Click Here" it appears it's just a click able object named "click here" that opens a hidden window by running a script inside the web page. I'm not able to grab the information from the window unless it's open so I have to automate this click somehow. 
       
      I understand it's difficult to assist without having something to look at, I apologize for that sincerely and appreciate and assistance and suggestions. 
    • By Bhooshan
      I need to mute an ongoing call on Microsoft teams without activating the window. Teams allows us to mute using shortcut key Ctrl+Shift+m but only when the window is active.
      # Used set option as ongoing call can be with any person which leads to change in Title Name.
      AutoItSetOption ( "WinTitleMatchMode", 2 ) 
      # I am not clear with the control ID which will be good to use here and also the key combination of ^M       
      ControlSend ( "Microsoft Teams", "", "[CLASS:Intermediate D3D Window; INSTANCE:1]", "{ctrl down}")
       
      Can anyone help...!!! 
       

    • By MrCreatoR
      This UDF allows to set an events handler for Mouse device.
       
      The beginning...
      I searched for a way to disable the Mouse Primary click, and be able to call some function when the click event is received...
      Big thanks to amel27 for this one, i only organized the whole stuff to UDF style.
       
      Example:
      #include <GUIConstantsEx.au3> #include "MouseOnEvent.au3" HotKeySet("{ESC}", "_Quit") _Example_Intro() _Example_Limit_Window() Func _Example_Intro() MsgBox(64, "Attention!", "Let's set event function for mouse wheel *scrolling* up and down", 5) ;Set event function for mouse wheel *scrolling* up/down and primary button *down* action (call our function when the events recieved) _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event") Sleep(3000) ;UnSet the events _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT) _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT) _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ToolTip("") MsgBox(64, "Attention!", "Now let's disable Secondary mouse button up action, and call our event function.", 5) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", 0, 1) Sleep(5000) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) ToolTip("") EndFunc Func _Example_Limit_Window() Local $hGUI = GUICreate("MouseOnEvent UDF Example - Restrict events on specific window") GUICtrlCreateLabel("Try to click on that specific GUI window", 40, 40, 300, 30) GUICtrlSetFont(-1, 12, 800) GUICtrlCreateLabel("Press <ESC> to exit", 10, 10) GUISetState() _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event", $hGUI) ;A little(?) bugie when you mix different events :( ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $GUI_EVENT_PRIMARYDOWN MsgBox(0, "", "Should not be shown ;)") EndSwitch WEnd _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) EndFunc Func _MouseWheel_Events($iEvent) Switch $iEvent Case $MOUSE_WHEELSCROLLDOWN_EVENT ToolTip("Wheel Mouse Button (scrolling) DOWN Blocked") Case $MOUSE_WHEELSCROLLUP_EVENT ToolTip("Wheel Mouse Button (scrolling) UP Blocked") EndSwitch Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MousePrimaryDown_Event() ToolTip("Primary Mouse Button Down Blocked") Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MouseSecondaryUp_Event() ToolTip("Secondary Mouse Button Up Blocked") EndFunc Func _Quit() Exit EndFunc  
      Available Events Constants:
       
      ------------------------------------------
      CHANGELOG:
      Download:
      Attached:     MouseOnEvent_2.4.zip
      Old version:
      MouseOnEvent.zip - v2.3
      MouseOnEvent_2.1.zip
      MouseOnEvent_2.0.zip
      MouseOnEvent_UDF_1.9.zip
      MouseSetOnEvent_UDF_1.8.zip
      MouseSetOnEvent_UDF_1.7.zip
      MouseSetOnEvent_UDF_1.6.zip
      MouseSetOnEvent_UDF_1.5.zip
      MouseSetOnEvent_UDF_1.4.zip
      MouseSetOnEvent_UDF_1.3.zip
      Previous downloads: 146 + 200 + 804
      MouseOnEvent.zip
      MouseOnEvent.zip
    • By nacerbaaziz
      good morning all.
      first lit me give you all a thinks to your help
      you're help me allot thank you all.
      sirs today i've a new problem
      it's not a problem but thing i want to add it to blind accessability.
      the ListBox can send a notification when the user send a double click on it items
      but as we know that the blind users can't use the mouse for that they use the keybord to navigate.
      as we know that the enter replace the double click on the keybord
      for that i need when the user send a inter above any listBox item the list send a double click notification.
      i know some of you tell me that i can use the  GUISetAccelerators function
      but the enter has a other tasks such as leav a blanc line on edits and activate the defaultButton and other tasks.
      that what i need and i hope that you can help me
      this is a simple example.
      #include <GUIConstantsEx.au3> #include <StructureConstants.au3> #include <MsgBoxConstants.au3> #include <WindowsConstants.au3> #include <ListBoxConstants.au3> Example() Func Example() Local $sMESSAGE = "The following buttons have been clicked" GUICreate("My GUI list") ; will create a dialog box that when displayed is centered Local $idButton_Add = GUICtrlCreateButton("Add", 64, 32, 75, 25) Local $idButton_Clear = GUICtrlCreateButton("Clear", 64, 72, 75, 25) global $idMylist = GUICtrlCreateList("buttons that have been clicked", 176, 32, 121, 97) GUICtrlSetLimit(-1, 200) ; to limit horizontal scrolling GUICtrlSetData(-1, $sMESSAGE) global $DummyList = GUICtrlCreateDummy() GUICtrlSendToDummy($DummyList, 1) Local $idButton_Close = GUICtrlCreateButton("my closing button", 64, 160, 175, 25) GUIRegisterMsg($WM_command, "WM_command") GUISetState(@SW_SHOW) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $idButton_Add GUICtrlSetData($idMylist, "You clicked button No1|") Case $idButton_Clear GUICtrlSetData($idMylist, "") Case $idButton_Close MsgBox($MB_SYSTEMMODAL, "", "the closing button has been clicked", 2) Exit case $DummyList $g_iTemp = GUICtrlRead($DummyList) if $g_iTemp = $LBN_DBLCLK then ;$LBN_DBLCLK then msgBox(64, "", "") endIf GUICtrlSendToDummy($DummyList, 0) EndSwitch WEnd EndFunc ;==>Example Func WM_command($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg Local $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = $lParam $iCode = BitShift($wParam, 16) ; Hi Word Switch $hWndFrom Case GUICtrlGetHandle($idMylist) Switch $iCode Case $LBN_SELCHANGE, $LBN_DBLCLK, $LBN_SELCANCEL, $LBN_SETFOCUS GUICtrlSendToDummy($DummyList, $iCode) case else ;GUICtrlSendToDummy($DummyTreeview, 1) EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc  
×
×
  • Create New...