Jump to content

Display IP Address, Default Gateway & DNS Servers


Recommended Posts

I have a GUI with buttons. When the IP Address button is pressed, it runs the script (below) and displays the IP Address in a window.

Now, I would like the window to display all of the following information: IP Address, Default Gateway & DNS Servers.

What do I need to add to show them all?

Thanks.

/////////// Start

Func IP1Pressed()

$IP_Address = _RunStdOutRead('ipconfig /all')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Check IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

/////////// End

Link to comment
Share on other sites

Something like this? >>

Function & Example:

#include <Array.au3>
#include <Constants.au3>

Local $aArray = _IPDetails()
If @error = 0 Then
    Local $sData = 'Your IP Address: ' & $aArray[1] & @CRLF & _
            'Your Gateway Address: ' & $aArray[3] & @CRLF & _
            'You DNS Servers: ' & $aArray[4]
    MsgBox($MB_SYSTEMMODAL, '', $sData)
EndIf
_ArrayDisplay($aArray)

Func _IPDetails()
    Local $oWMIService = ObjGet('winmgmts:{impersonationLevel = impersonate}!\\' & '.' & '\root\cimv2')
    Local $oColItems = $oWMIService.ExecQuery('Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True', 'WQL', 0x30), $aReturn[5] = [0]
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            If $oObjectItem.IPAddress(0) == @IPAddress1 Then
                $aReturn[0] = 4
                $aReturn[1] = $oObjectItem.IPAddress(0)
                $aReturn[2] = $oObjectItem.MACAddress
                $aReturn[3] = $oObjectItem.DefaultIPGateway(0)
                $aReturn[4] = _WMIArrayToString($oObjectItem.DNSServerSearchOrder(), ', ') ; You could use _ArrayToString() but I like creating my own Functions especially when I don't need alot of error checking.
            EndIf
        Next
    EndIf
    Return SetError($aReturn[0] = 0, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _WMIArrayToString($aArray, $sDelimeter = '|')
    Local $sString = 'Not Available'
    If UBound($aArray) Then
        For $i = 0 To UBound($aArray) - 1
            $sString &= $aArray[$i] & $sDelimeter
        Next
        $sString = StringTrimRight($sString, StringLen($sDelimeter))
    EndIf
    Return $sString
EndFunc   ;==>_WMIArrayToString
Edited by guinness

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Thanks for you inputs.

I really want to use the program I have and just add a couple of lines to make it display the Gateway Address and DNS Server Addresses after the IP Address.

FYI- I have tried the command @IPAddress1 before and found that sometimes it was not accurate.

(In my script after this line):

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

(would this work if add something like this):

$Gateway = StringRegExpReplace($Gateway, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

$DNS = StringRegExpReplace($DNS, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Check IP Address", StringFormat("Your IP Address is: %s", $IP_Address, $Gateway, $DNS))

//////(I know nothing about programming).

I'd like a window that pops open with:

Your IP Address: xx.xx.xx.xx

Your Gateway Address: xx.xx.xx.xx

You DNS Servers: xx.xx.xx.xx , xx.xx.xx.xx

(or something like that)

Thanks.

Link to comment
Share on other sites

Did you even try my Example? I have modified it a little to show a MsgBox, but I think I have given you enough to work with if I'm honest >>

Example 1:

#include <Array.au3>
#include <Constants.au3>

Local $aArray = _IPDetails()
If @error = 0 Then
    Local $sData = 'Your IP Address: ' & $aArray[1] & @CRLF & _
            'Your Gateway Address: ' & $aArray[3] & @CRLF & _
            'You DNS Servers: ' & $aArray[4]
    MsgBox($MB_SYSTEMMODAL, '', $sData)
EndIf
_ArrayDisplay($aArray)

Func _IPDetails()
    Local $oWMIService = ObjGet('winmgmts:{impersonationLevel = impersonate}!\\' & '.' & '\root\cimv2')
    Local $oColItems = $oWMIService.ExecQuery('Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True', 'WQL', 0x30), $aReturn[5] = [0]
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            If $oObjectItem.IPAddress(0) == @IPAddress1 Then
                $aReturn[0] = 4
                $aReturn[1] = $oObjectItem.IPAddress(0)
                $aReturn[2] = $oObjectItem.MACAddress
                $aReturn[3] = $oObjectItem.DefaultIPGateway(0)
                $aReturn[4] = _WMIArrayToString($oObjectItem.DNSServerSearchOrder(), ', ') ; You could use _ArrayToString() but I like creating my own Functions especially when I don't need alot of error checking.
            EndIf
        Next
    EndIf
    Return SetError($aReturn[0] = 0, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _WMIArrayToString($aArray, $sDelimeter = '|')
    Local $sString = 'Not Available'
    If UBound($aArray) Then
        For $i = 0 To UBound($aArray) - 1
            $sString &= $aArray[$i] & $sDelimeter
        Next
        $sString = StringTrimRight($sString, StringLen($sDelimeter))
    EndIf
    Return $sString
EndFunc   ;==>_WMIArrayToString

Example 2: the idea came from sahsanu for how to present the output.

#include <Array.au3>
#include <Constants.au3>

Local $aArray = _IPDetails()
If @error = 0 Then
    Local $sData = ''
    For $i = 1 To $aArray[0][0]
        $sData &= 'Description: ' & $aArray[$i][0] & @CRLF & 'IP Address: ' & $aArray[$i][1] & @CRLF & 'MAC: ' & _
                $aArray[$i][2] & @CRLF & 'Default Gateway: ' & $aArray[$i][3] & @CRLF & 'DNS Servers: ' & $aArray[$i][4] & @CRLF & @CRLF
    Next
    $sData = StringTrimRight($sData, StringLen(@CRLF & @CRLF))
    MsgBox($MB_SYSTEMMODAL, '', $sData)
EndIf
_ArrayDisplay($aArray)

Func _IPDetails()
    Local $aReturn[1][5] = [[0, 5]], $iCount = 0
    Local $oWMIService = ObjGet('winmgmts:{impersonationLevel = impersonate}!\\' & '.' & '\root\cimv2')
    Local $oColItems = $oWMIService.ExecQuery('Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True', 'WQL', 0x30)
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            $aReturn[0][0] += 1
            $iCount += 1

            If $aReturn[0][0] <= $iCount + 1 Then
                ReDim $aReturn[$aReturn[0][0] * 2][$aReturn[0][1]]
            EndIf

            $aReturn[$iCount][0] = _IsString($oObjectItem.Description)
            $aReturn[$iCount][1] = _IsString($oObjectItem.IPAddress(0))
            $aReturn[$iCount][2] = _IsString($oObjectItem.MACAddress)
            $aReturn[$iCount][3] = _IsString($oObjectItem.DefaultIPGateway(0))
            $aReturn[$iCount][4] = _IsString(_WMIArrayToString($oObjectItem.DNSServerSearchOrder(), ' - ')) ; You could use _ArrayToString() but I like creating my own Functions especially when I don't need alot of error checking.
        Next
        ReDim $aReturn[$aReturn[0][0] + 1][$aReturn[0][1]]
    EndIf
    Return SetError($aReturn[0][0] = 0, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _IsString($sString)
    If IsString($sString) = 0 Then
        $sString = 'Not Available'
    EndIf
    Return $sString
EndFunc   ;==>_IsString

Func _WMIArrayToString($aArray, $sDelimeter = '|')
    Local $sString = 'Not Available'
    If UBound($aArray) Then
        For $i = 0 To UBound($aArray) - 1
            $sString &= $aArray[$i] & $sDelimeter
        Next
        $sString = StringTrimRight($sString, StringLen($sDelimeter))
    EndIf
    Return $sString
EndFunc   ;==>_WMIArrayToString

Plus, when you post code use the [autoit] tags and try to post the whole code instead of bits here and there.

Edited by guinness

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Hi Guinness.

Yes- that works great!

OK, now I have another request. I tried it with a wireless adapter enabled.

Is there a way in the message box to show both the Local Area Adapter and the Wireless Adapter addresses?

Thanks.

Link to comment
Share on other sites

More for Guinness.

Here is my total script - before your suggestion. How do I integrate your script into this little utility to make it all work?

//////////Start

#include <GUIConstants.au3>

; This script requires full Administrative rights

#requireadmin

#AutoIt3Wrapper_UseAnsi=y

Opt("GUICoordMode",2)

Opt("GUIResizeMode", 1)

Opt("GUIOnEventMode", 1)

Select

Case @OSVersion = "WIN_VISTA"

$Parent1 = GUICreate("GBON Tool", 180, 500, 600)

GUICtrlCreateLabel("You have Windows Vista" & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)

GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 20, 100)

GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 20, 100)

GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 20, 100)

GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 20, 100)

GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 20, 100)

GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Properties", -100, 20, 100)

GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 20, 100)

GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case @OSVersion = "WIN_XP"

$Parent1 = GUICreate("GBON!", 165, 650, 780)

GUICtrlCreateLabel("You have Windows XP" & @CRLF & "" & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)

GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 18, 100)

GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 18, 100)

GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 18, 100)

GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 18, 100)

GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 18, 100)

GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Options", -100, 18, 100)

GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 18, 100)

GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case Else

MsgBox(48, "Unsupported OS", "This application is not designed to run on this operating system.")

Exit

EndSelect

; Just idle around

While 1

Sleep(10)

Wend

Func VerPressed()

Run("winver")

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func IP1Pressed()

$IP_Address = _RunStdOutRead('ipconfig /all')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Check IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func ReleasePressed()

$IP_Address = _RunStdOutRead('ipconfig /release')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Release IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func RenewPressed()

$IP_Address = _RunStdOutRead('ipconfig /renew')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Renew IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func FlushPressed()

$IP_Address = _RunStdOutRead('netsh int ip delete arpcache & ipconfig/flushdns')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Flush DNS", StringFormat("%s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func TCPIPPressed()

$IP_Address = _RunStdOutRead('netsh int ip reset resetlog.txt & netsh winsock reset')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Reset TCP/IP & Winsock", StringFormat("%s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

;Function to read from Command Line process.

Func _RunStdOutRead($sRunCmd)

Local $iPID = Run(@ComSpec & ' /c ' & $sRunCmd, @ScriptDir, @SW_HIDE, 4 + 2)

Local $sStdOutRead = ""

While ProcessExists($iPID)

$sStdOutRead &= StdoutRead($iPID)

WEnd

Return $sStdOutRead

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func Ping4Pressed()

$IP_Address = _RunStdOutRead('ping www.google.com')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Ping Out By URL", StringFormat("%s", $IP_Address))

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func InetPressed()

Run("control inetcpl.cpl")

WinWait("Internet Options", "", 5)

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func ServPressed()

$File = @SystemDir & "\services.msc"

Run(@SystemDir & "\mmc.exe " & $File)

EndFunc

; Just idle around

While 1

Sleep(10)

Wend

; END

Func SpecialEvents()

Select

Case @GUI_CTRLID = $GUI_EVENT_CLOSE

Exit

Case @GUI_CTRLID = $GUI_EVENT_MINIMIZE

MsgBox(0, "Window Minimized", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

Case @GUI_CTRLID = $GUI_EVENT_RESTORE

MsgBox(0, "Window Restored", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

EndSelect

EndFunc

///////////////End

Link to comment
Share on other sites

Here is my total script - before your suggestion. How do I integrate your script into this little utility to make it all work?

Hello, next time, please, put your source code between autoit or code tags. Here is your script with guinnes function. I didn't take care about your code but just removed all the no needed whiles you had there.

#include <GUIConstants.au3>
; This script requires full Administrative rights
#requireadmin
#AutoIt3Wrapper_UseAnsi=y

Opt("GUICoordMode",2)
Opt("GUIResizeMode", 1)
Opt("GUIOnEventMode", 1)

Global $aArray = _IPDetails()
Global $sData = "Your IP Address: " & $aArray[1] & @LF & _
        "Your Gateway Address: " & $aArray[3] & @LF & _
        "You DNS Servers: " & $aArray[4]

Select
Case @OSVersion = "WIN_VISTA"
$Parent1 = GUICreate("GBON Tool", 180, 500, 600)
GUICtrlCreateLabel("You have Windows Vista" & @CRLF & "Wait 10 sec. after clicking", 25, 20)
GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)
GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 20, 100)
GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 20, 100)
GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 20, 100)
GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 20, 100)
GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 20, 100)
GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Properties", -100, 20, 100)
GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 20, 100)
GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)
Case @OSVersion = "WIN_XP"
$Parent1 = GUICreate("GBON!", 165, 650, 780)
GUICtrlCreateLabel("You have Windows XP" & @CRLF & "" & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)
GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 18, 100)
GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 18, 100)
GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 18, 100)
GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 18, 100)
GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 18, 100)
GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Options", -100, 18, 100)
GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 18, 100)
GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case Else
MsgBox(48, "Unsupported OS", "This application is not designed to run on this operating system.")
Exit
EndSelect

; Just idle around
While 1
Sleep(1000)
Wend

Func VerPressed()
Run("winver")
EndFunc

Func IP1Pressed()
MsgBox(0, "_IPDetails()", $sData)
;$IP_Address = _RunStdOutRead('ipconfig /all')
;$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")
;MsgBox(64, "Check IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func ReleasePressed()
$IP_Address = _RunStdOutRead('ipconfig /release')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")
MsgBox(64, "Release IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func RenewPressed()
$IP_Address = _RunStdOutRead('ipconfig /renew')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")
MsgBox(64, "Renew IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func FlushPressed()
$IP_Address = _RunStdOutRead('netsh int ip delete arpcache & ipconfig/flushdns')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")
MsgBox(64, "Flush DNS", StringFormat("%s", $IP_Address))
EndFunc

Func TCPIPPressed()
$IP_Address = _RunStdOutRead('netsh int ip reset resetlog.txt & netsh winsock reset')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")
MsgBox(64, "Reset TCP/IP & Winsock", StringFormat("%s", $IP_Address))
EndFunc

;Function to read from Command Line process.
Func _RunStdOutRead($sRunCmd)
Local $iPID = Run(@ComSpec & ' /c ' & $sRunCmd, @ScriptDir, @SW_HIDE, 4 + 2)
Local $sStdOutRead = ""

While ProcessExists($iPID)
$sStdOutRead &= StdoutRead($iPID)
WEnd

Return $sStdOutRead
EndFunc

Func Ping4Pressed()
$IP_Address = _RunStdOutRead('ping www.google.com')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")
MsgBox(64, "Ping Out By URL", StringFormat("%s", $IP_Address))
EndFunc

Func InetPressed()
Run("control inetcpl.cpl")
WinWait("Internet Options", "", 5)
EndFunc

Func ServPressed()
$File = @SystemDir & "\services.msc"
Run(@SystemDir & "\mmc.exe " & $File)
EndFunc

Func SpecialEvents()

Select
Case @GUI_CTRLID = $GUI_EVENT_CLOSE
Exit

Case @GUI_CTRLID = $GUI_EVENT_MINIMIZE
MsgBox(0, "Window Minimized", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

Case @GUI_CTRLID = $GUI_EVENT_RESTORE
MsgBox(0, "Window Restored", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

EndSelect

EndFunc

Func _IPDetails()
    Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")
    Local $oColItems = $oWMIService.ExecQuery("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True", "WQL", 0x30), $aReturn[5] = [4]
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            If $oObjectItem.IPAddress(0) == @IPAddress1 Then
                $aReturn[1] = $oObjectItem.IPAddress(0)
                $aReturn[2] = $oObjectItem.MACAddress
                $aReturn[3] = $oObjectItem.DefaultIPGateway(0)
                $aReturn[4] = _WMIArrayToString($oObjectItem.DNSServerSearchOrder(), ", ") ; You could use _ArrayToString() but I like creating my own Functions especially when I don't need alot of error checking.
            EndIf
        Next
        Return $aReturn
    EndIf
    Return SetError(1, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _WMIArrayToString($aArray, $sDelimeter = "|")
    If IsArray($aArray) = 0 Then
        Return SetError(1, 0, "")
    EndIf
    Local $iUbound = UBound($aArray) - 1, $sString
    For $A = 0 To $iUbound
        $sString &= $aArray[$A] & $sDelimeter
    Next
    Return StringTrimRight($sString, StringLen($sDelimeter))
EndFunc   ;==>_WMIArrayToString
Edited by sahsanu
Link to comment
Share on other sites

Thanks sahsanu- you rock!

Yeh, Thanks! :unsure:

I am little confused as to why you couldn't implement yourself? :> It appears you have a clear understanding of AutoIt. I would recommend having a look at Arrays >> http://www.autoitscript.com/wiki/Arrays as these can be a huge help with coding.

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Thanks.

I have a micron of knowledge about programming. I can spell AutoIt but,

I do not really understand arrays, variables, what the scripts are doing

and all that. (I tried to learn Basic in the early 80's and looked at c#

last year but, decided that I couldn't do it on my own.)

99.9% of my utility came from guys (& gals?) like you on this forum.

Once I see the script- sometimes, I can kind of make out what it is doing

and where I can make a change to make it do what I want. However, I mainly do

cosmetic changes, though.

Mark

Link to comment
Share on other sites

It's probably possible but I don't have enough time right now to write the code.

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Is there a way in the IP Address message box, to show both the Local Area Adapter and the Wireless Adapter addresses?

Below script will show all the network adapters with an ip address configured (I don't really know whether this is what you want):

#include <GUIConstants.au3>
; This script requires full Administrative rights
#requireadmin
#AutoIt3Wrapper_UseAnsi=y

Opt("GUICoordMode",2)
Opt("GUIResizeMode", 1)
Opt("GUIOnEventMode", 1)

Select
Case @OSVersion = "WIN_VISTA"
$Parent1 = GUICreate("GBON Tool", 180, 500, 600)
GUICtrlCreateLabel("You have Windows Vista" & @CRLF & "Wait 10 sec. after clicking", 25, 20)
GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)
GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 20, 100)
GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 20, 100)
GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 20, 100)
GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 20, 100)
GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 20, 100)
GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Properties", -100, 20, 100)
GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 20, 100)
GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)
Case @OSVersion = "WIN_XP"
$Parent1 = GUICreate("GBON!", 165, 650, 780)
GUICtrlCreateLabel("You have Windows XP" & @CRLF & "" & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)
GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 18, 100)
GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 18, 100)
GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 18, 100)
GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 18, 100)
GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 18, 100)
GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Options", -100, 18, 100)
GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 18, 100)
GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case Else
MsgBox(48, "Unsupported OS", "This application is not designed to run on this operating system.")
Exit
EndSelect

; Just idle around
While 1
Sleep(1000)
Wend

Func VerPressed()
Run("winver")
EndFunc

Func IP1Pressed()
MsgBox(64, "IP Addresses",_IPDetails())
EndFunc

Func ReleasePressed()
$IP_Address = _RunStdOutRead('ipconfig /release')
$IP_Address = StringRegExpReplace($IP_Address, '(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).* , '\1')
MsgBox(64, "Release IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func RenewPressed()
$IP_Address = _RunStdOutRead('ipconfig /renew')
$IP_Address = StringRegExpReplace($IP_Address, '(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).* , '\1')
MsgBox(64, "Renew IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func FlushPressed()
$IP_Address = _RunStdOutRead('netsh int ip delete arpcache & ipconfig/flushdns')
$IP_Address = StringRegExpReplace($IP_Address, '(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).* , '\1')
MsgBox(64, "Flush DNS", StringFormat("%s", $IP_Address))
EndFunc

Func TCPIPPressed()
$IP_Address = _RunStdOutRead('netsh int ip reset resetlog.txt & netsh winsock reset')
$IP_Address = StringRegExpReplace($IP_Address, '(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).* , '\1')
MsgBox(64, "Reset TCP/IP & Winsock", StringFormat("%s", $IP_Address))
EndFunc

;Function to read from Command Line process.
Func _RunStdOutRead($sRunCmd)
Local $iPID = Run(@ComSpec & ' /c ' & $sRunCmd, @ScriptDir, @SW_HIDE, 4 + 2)
Local $sStdOutRead = ""

While ProcessExists($iPID)
$sStdOutRead &= StdoutRead($iPID)
WEnd

Return $sStdOutRead
EndFunc

Func Ping4Pressed()
$IP_Address = _RunStdOutRead('ping www.google.com')
$IP_Address = StringRegExpReplace($IP_Address, '(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*  , '\1')
MsgBox(64, "Ping Out By URL", StringFormat("%s", $IP_Address))
EndFunc

Func InetPressed()
Run("control inetcpl.cpl")
WinWait("Internet Options", "", 5)
EndFunc

Func ServPressed()
$File = @SystemDir & "\services.msc"
Run(@SystemDir & "\mmc.exe " & $File)
EndFunc

Func SpecialEvents()

Select
Case @GUI_CTRLID = $GUI_EVENT_CLOSE
Exit

Case @GUI_CTRLID = $GUI_EVENT_MINIMIZE
MsgBox(0, "Window Minimized", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

Case @GUI_CTRLID = $GUI_EVENT_RESTORE
MsgBox(0, "Window Restored", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

EndSelect

EndFunc

Func _IPDetails()
    Local $totalReturn=""
    Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")
    Local $oColItems = $oWMIService.ExecQuery("Select * From Win32_NetworkAdapterConfiguration", "WQL", 0x30), $aReturn[6] = [5]
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
        If IsString($oObjectItem.IPAddress(0)) Then
                If IsString($oObjectItem.Description) Then
                    $aReturn[1] = "Description:" & @TAB & $oObjectItem.Description
                Else
                    $aReturn[1] = "Description:" & @TAB & "Not Available"
                EndIf

                If IsString($oObjectItem.IPAddress(0)) Then
                    $aReturn[2] = "IP Address:" & @TAB & $oObjectItem.IPAddress(0)
                Else
                    $aReturn[2] = "IP Address:" & @TAB & "Not Available"
                EndIf

                If IsString($oObjectItem.DefaultIPGateway(0)) Then
                    $aReturn[3] = "Default Gateway:" & @TAB & $oObjectItem.DefaultIPGateway(0)
                Else
                    $aReturn[3] = "Default Gateway:" & @TAB & "Not Available"
                EndIf

                If IsArray($oObjectItem.DNSServerSearchOrder()) Then
                    $aReturn[4] = "DNS Servers:" & @TAB & _WMIArrayToString($oObjectItem.DNSServerSearchOrder(), " - ")
                Else
                    $aReturn[4] = "DNS Servers:" & @TAB & "Not Available"
                EndIf

                If IsString($oObjectItem.MACAddress) Then
                    $aReturn[5] = "MAC: " & @TAB & @TAB & $oObjectItem.MACAddress
                Else
                    $aReturn[5] = "MAC: " & @TAB & @TAB & "Not Available"
                EndIf

            $totalReturn &= $aReturn[1] & @CRLF & $aReturn[2] & @CRLF & $aReturn[3] &  @CRLF & $aReturn[4] &  @CRLF & $aReturn[5] & @CRLF & @CRLF
            EndIf
        Next
        Return StringTrimRight($totalReturn,4)
    EndIf
    Return SetError(1, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _WMIArrayToString($aArray, $sDelimeter = "|")
    If IsArray($aArray) = 0 Then
        Return SetError(1, 0, "")
    EndIf
    Local $iUbound = UBound($aArray) - 1, $sString
    For $A = 0 To $iUbound
        $sString &= $aArray[$A] & $sDelimeter
    Next
    Return StringTrimRight($sString, StringLen($sDelimeter))
EndFunc   ;==>_WMIArrayToString

Edit: As per below guinness catch. Don't know why but autoit tags didn't like one of the "" on the StringRegExp functions. It is corrected now (I hope so).

Edit2: No, it is not, really autoit tags don't like (dollar sign) and ' , they are eating them so I've put it between code tags that seems to work fine ;-)

Edit3: Ahhhhhhhh, that is crazy, it fails after I refresh the page. I don't know how to solve this, please, in the code add (dollar sign)' at the pattern end on every StringRegExp function.

Edited by sahsanu
Link to comment
Share on other sites

sahsanu - Nice!

Plus wowmarkb, I would recommend checking the SRE as they are missing " at the end, therefore it will fail on runtime!

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

sahsanu - Thanks but, it has errors- lines 101-105 (Lines 99-105 shown below).

Func ReleasePressed()

$IP_Address = _RunStdOutRead('ipconfig /release')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\1")"

MsgBox(64, "Release IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

Func RenewPressed()

//////////end

When I do syntax check, it says this:

>C:\Program Files\AutoIt3\SciTE\..\au3check.exe "C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3"

AutoIt3 Syntax Checker v1.54.8 Copyright © Tylo 2007

C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3(101,105) : ERROR: syntax error (illegal character)

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3(107,105) : ERROR: syntax error (illegal character)

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3(113,105) : ERROR: syntax error (illegal character)

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3(119,105) : ERROR: syntax error (illegal character)

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3(137,105) : ERROR: syntax error (illegal character)

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^

C:\My Book Feb 2011\My GBON Tool\7 May\All IPs.au3 - 5 error(s), 0 warning(s)

////////////////end

Guinness, I tried using an SRE tester online but, I am clueless as to how to make it work. I added a quote on the end of:

line 101 like this:

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;, "\1")"

...but that didn't work.

I did change a couple of lines to the previous script that opens a DOS window and displays all the ipconfig info which is OK.

It would be nice to have a message box open and give only the IP Address, Gateway, & DNS Servers for all Local Area Adapters

& Wireless Adapters so that it won't be information overload to for users when they hit the Check Addresses button, that's all:

////////////start

#include <GUIConstants.au3>

; This script requires full Administrative rights

#requireadmin

#AutoIt3Wrapper_UseAnsi=y

Opt("GUICoordMode",2)

Opt("GUIResizeMode", 1)

Opt("GUIOnEventMode", 1)

Global $aArray = _IPDetails()

Global $sData = "Your IP Address: " & $aArray[1] & @LF & _

"Your Gateway Address: " & $aArray[3] & @LF & _

"You DNS Servers: " & $aArray[4]

Select

Case @OSVersion = "WIN_7"

$Parent1 = GUICreate("GBON Tool", 180, 500, 600)

GUICtrlCreateLabel("You have Windows 7" & @CRLF & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x00CCFF) ; set color (0x33CCCC old color)

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check Addresses", -120, 18, 100, 30)

GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 20, 100)

GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 20, 100)

GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 20, 100)

GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 20, 100)

GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 20, 100)

GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Properties", -100, 20, 100)

GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 20, 100)

GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case @OSVersion = "WIN_VISTA"

$Parent1 = GUICreate("GBON Tool", 180, 530, 600)

GUICtrlCreateLabel("You have Windows Vista" & @CRLF & @CRLF & "Click button and wait 10" & @CRLF & "sec. for window to open", 32, 20)

GUISetBkColor(0x00CCFF) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check Addresses", -118, 18, 100, 30)

GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 20, 100)

GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 20, 100)

GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 20, 100)

GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 20, 100)

GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 20, 100)

GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Properties", -100, 20, 100)

GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 20, 100)

GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case @OSVersion = "WIN_XP"

$Parent1 = GUICreate("GBON! Tool", 180, 500, 600)

GUICtrlCreateLabel("You have Windows XP" & @CRLF & "" & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x00CCFF) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check Addresses", -120, 18, 100, 30)

GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 18, 100)

GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 18, 100)

GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 18, 100)

GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 18, 100)

GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 18, 100)

GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Options", -100, 18, 100)

GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 18, 100)

GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case Else

MsgBox(48, "Unsupported OS", "This application is not designed to run on this operating system.")

Exit

EndSelect

; Just idle around

While 1

Sleep(1000)

Wend

Func VerPressed()

Run("winver")

EndFunc

Func IP1Pressed()

$CMD = "ipconfig /all"

RunWait(@ComSpec & " /k " & $CMD, @WindowsDir, @SW_SHOW)

EndFunc

Func ReleasePressed()

$IP_Address = _RunStdOutRead('ipconfig /release')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Release IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

Func RenewPressed()

$IP_Address = _RunStdOutRead('ipconfig /renew')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Renew IP Address", StringFormat("Your IP Address is: %s", $IP_Address))

EndFunc

Func FlushPressed()

$IP_Address = _RunStdOutRead('netsh int ip delete arpcache & ipconfig/flushdns')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Flush DNS", StringFormat("%s", $IP_Address))

EndFunc

Func TCPIPPressed()

$IP_Address = _RunStdOutRead('netsh int ip reset resetlog.txt & netsh winsock reset')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Reset TCP/IP & Winsock", StringFormat("%s", $IP_Address))

EndFunc

;Function to read from Command Line process.

Func _RunStdOutRead($sRunCmd)

Local $iPID = Run(@ComSpec & ' /c ' & $sRunCmd, @ScriptDir, @SW_HIDE, 4 + 2)

Local $sStdOutRead = ""

While ProcessExists($iPID)

$sStdOutRead &= StdoutRead($iPID)

WEnd

Return $sStdOutRead

EndFunc

Func Ping4Pressed()

$IP_Address = _RunStdOutRead('ping www.google.com')

$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*$", "\1")

MsgBox(64, "Ping Out By URL", StringFormat("%s", $IP_Address))

EndFunc

Func InetPressed()

Run("control inetcpl.cpl")

WinWait("Internet Options", "", 5)

EndFunc

Func ServPressed()

$File = @SystemDir & "\services.msc"

Run(@SystemDir & "\mmc.exe " & $File)

EndFunc

Func SpecialEvents()

Select

Case @GUI_CTRLID = $GUI_EVENT_CLOSE

Exit

Case @GUI_CTRLID = $GUI_EVENT_MINIMIZE

MsgBox(0, "Window Minimized", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

Case @GUI_CTRLID = $GUI_EVENT_RESTORE

MsgBox(0, "Window Restored", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

EndSelect

EndFunc

Func _IPDetails()

Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")

Local $oColItems = $oWMIService.ExecQuery("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True", "WQL", 0x30), $aReturn[5] = [4]

If IsObj($oColItems) Then

For $oObjectItem In $oColItems

If $oObjectItem.IPAddress(0) == @IPAddress1 Then

$aReturn[1] = $oObjectItem.IPAddress(0)

$aReturn[2] = $oObjectItem.MACAddress

$aReturn[3] = $oObjectItem.DefaultIPGateway(0)

$aReturn[4] = _WMIArrayToString($oObjectItem.DNSServerSearchOrder(), " and ") ; You could use _ArrayToString() but I like creating my own Functions especially when I don't need alot of error checking.

EndIf

Next

Return $aReturn

EndIf

Return SetError(1, 0, $aReturn)

EndFunc ;==>_IPDetails

Func _WMIArrayToString($aArray, $sDelimeter = "|")

If IsArray($aArray) = 0 Then

Return SetError(1, 0, "")

EndIf

Local $iUbound = UBound($aArray) - 1, $sString

For $A = 0 To $iUbound

$sString &= $aArray[$A] & $sDelimeter

Next

Return StringTrimRight($sString, StringLen($sDelimeter))

EndFunc ;==>_WMIArrayToString

/////////////////end

Thanks sahsanu & guinness for your continued help.

Link to comment
Share on other sites

Please please when you post code use the

[/autoit][/b] tags. I have fixed the code, but I highly suggest firstly comparing the error version with the update to see what I changed and secondly looking through the Help File, because I know you have taken code from here and there but in the long run it will cause problems sticking bits and pieces together. Also the errors were quite clear in the SciTE output screen.

[b]FIXED:[/b]
[autoit]#include <GUIConstants.au3>
; This script requires full Administrative rights
#requireadmin
#AutoIt3Wrapper_UseAnsi=y

Opt("GUICoordMode",2)
Opt("GUIResizeMode", 1)
Opt("GUIOnEventMode", 1)

MsgBox(64, "IP Addresses",_IPDetails())
Exit

Select
Case @OSVersion = "WIN_VISTA"
$Parent1 = GUICreate("GBON Tool", 180, 500, 600)
GUICtrlCreateLabel("You have Windows Vista" & @CRLF & "Wait 10 sec. after clicking", 25, 20)
GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)
GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 20, 100)
GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 20, 100)
GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 20, 100)
GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 20, 100)
GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 20, 100)
GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Properties", -100, 20, 100)
GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 20, 100)
GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)
Case @OSVersion = "WIN_XP"
$Parent1 = GUICreate("GBON!", 165, 650, 780)
GUICtrlCreateLabel("You have Windows XP" & @CRLF & "" & @CRLF & "Wait 10 sec. after clicking", 25, 20)

GUISetBkColor(0x33CCCC) ; set color

GUISetOnEvent($GUI_EVENT_CLOSE, "SpecialEvents")

$ip1 = GUICtrlCreateButton ("Check IP Address", -120, 18, 100, 30)
GUICtrlSetOnEvent(-1, "IP1Pressed")

$release = GUICtrlCreateButton ("Release IP", -100, 18, 100)
GUICtrlSetOnEvent(-1, "ReleasePressed")

$renew = GUICtrlCreateButton ("Renew IP", -100, 18, 100)
GUICtrlSetOnEvent(-1, "RenewPressed")

$flush = GUICtrlCreateButton ("Flush DNS", -100, 18, 100)
GUICtrlSetOnEvent(-1, "FlushPressed")

$tcpip = GUICtrlCreateButton ("TCP/IP Winsock", -100, 18, 100)
GUICtrlSetOnEvent(-1, "TCPIPPressed")

$ping4 = GUICtrlCreateButton ("Ping Google", -100, 18, 100)
GUICtrlSetOnEvent(-1, "Ping4Pressed")

$inet = GUICtrlCreateButton ("Internet Options", -100, 18, 100)
GUICtrlSetOnEvent(-1, "InetPressed")

$serv = GUICtrlCreateButton ("Check Services", -100, 18, 100)
GUICtrlSetOnEvent(-1, "ServPressed")

GUICtrlCreateLabel("Version 2" & @CRLF & "© Mark Burch, 2011", -100, 20)

GUISetState(@SW_SHOW)

Case Else
MsgBox(48, "Unsupported OS", "This application is not designed to run on this operating system.")
Exit
EndSelect

; Just idle around
While 1
Sleep(1000)
Wend

Func VerPressed()
Run("winver")
EndFunc

Func IP1Pressed()
MsgBox(64, "IP Addresses",_IPDetails())
EndFunc

Func ReleasePressed()
$IP_Address = _RunStdOutRead('ipconfig /release')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;", "\1")
MsgBox(64, "Release IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func RenewPressed()
$IP_Address = _RunStdOutRead('ipconfig /renew')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;", "\1")
MsgBox(64, "Renew IP Address", StringFormat("Your IP Address is: %s", $IP_Address))
EndFunc

Func FlushPressed()
$IP_Address = _RunStdOutRead('netsh int ip delete arpcache & ipconfig/flushdns')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;", "\1")
MsgBox(64, "Flush DNS", StringFormat("%s", $IP_Address))
EndFunc

Func TCPIPPressed()
$IP_Address = _RunStdOutRead('netsh int ip reset resetlog.txt & netsh winsock reset')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;", "\1")
MsgBox(64, "Reset TCP/IP & Winsock", StringFormat("%s", $IP_Address))
EndFunc

;Function to read from Command Line process.
Func _RunStdOutRead($sRunCmd)
Local $iPID = Run(@ComSpec & ' /c ' & $sRunCmd, @ScriptDir, @SW_HIDE, 4 + 2)
Local $sStdOutRead = ""

While ProcessExists($iPID)
$sStdOutRead &= StdoutRead($iPID)
WEnd

Return $sStdOutRead
EndFunc

Func Ping4Pressed()
$IP_Address = _RunStdOutRead('ping www.google.com')
$IP_Address = StringRegExpReplace($IP_Address, "(?i)(?s).*IP.*?(\d+\.\d+\.\d+\.\d+).*{:content:}quot;", "\1")
MsgBox(64, "Ping Out By URL", StringFormat("%s", $IP_Address))
EndFunc

Func InetPressed()
Run("control inetcpl.cpl")
WinWait("Internet Options", "", 5)
EndFunc

Func ServPressed()
$File = @SystemDir & "\services.msc"
Run(@SystemDir & "\mmc.exe " & $File)
EndFunc

Func SpecialEvents()

Select
Case @GUI_CTRLID = $GUI_EVENT_CLOSE
Exit

Case @GUI_CTRLID = $GUI_EVENT_MINIMIZE
MsgBox(0, "Window Minimized", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

Case @GUI_CTRLID = $GUI_EVENT_RESTORE
MsgBox(0, "Window Restored", "ID=" & @GUI_CTRLID & " WinHandle=" & @GUI_WINHANDLE)

EndSelect

EndFunc

Func _IPDetails()
    Local $totalReturn=""
    Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")
    Local $oColItems = $oWMIService.ExecQuery("Select * From Win32_NetworkAdapterConfiguration", "WQL", 0x30), $aReturn[6] = [5]
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
        If IsString($oObjectItem.IPAddress(0)) Then
                If IsString($oObjectItem.Description) Then
                    $aReturn[1] = "Description:" & @TAB & $oObjectItem.Description
                Else
                    $aReturn[1] = "Description:" & @TAB & "Not Available"
                EndIf

                If IsString($oObjectItem.IPAddress(0)) Then
                    $aReturn[2] = "IP Address:" & @TAB & $oObjectItem.IPAddress(0)
                Else
                    $aReturn[2] = "IP Address:" & @TAB & "Not Available"
                EndIf

                If IsString($oObjectItem.DefaultIPGateway(0)) Then
                    $aReturn[3] = "Default Gateway:" & @TAB & $oObjectItem.DefaultIPGateway(0)
                Else
                    $aReturn[3] = "Default Gateway:" & @TAB & "Not Available"
                EndIf

                If IsArray($oObjectItem.DNSServerSearchOrder()) Then
                    $aReturn[4] = "DNS Servers:" & @TAB & _WMIArrayToString($oObjectItem.DNSServerSearchOrder(), " - ")
                Else
                     $aReturn[4] = "DNS Servers:" & @TAB & "Not Available"
                EndIf

                If IsString($oObjectItem.MACAddress) Then
                    $aReturn[5] = "MAC: " & @TAB & @TAB & $oObjectItem.MACAddress
                Else
                    $aReturn[5] = "MAC: " & @TAB & @TAB & "Not Available"
                EndIf

            $totalReturn &= $aReturn[1] & @CRLF & $aReturn[2] & @CRLF & $aReturn[3] &  @CRLF & $aReturn[4] &  @CRLF & $aReturn[5] & @CRLF & @CRLF
            EndIf
        Next
        Return StringTrimRight($totalReturn,4)
    EndIf
    Return SetError(1, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _WMIArrayToString($aArray, $sDelimeter = "|")
    If IsArray($aArray) = 0 Then
        Return SetError(1, 0, "")
    EndIf
    Local $iUbound = UBound($aArray) - 1, $sString
    For $A = 0 To $iUbound
        $sString &= $aArray[$A] & $sDelimeter
    Next
    Return StringTrimRight($sString, StringLen($sDelimeter))
EndFunc   ;==>_WMIArrayToString

Note: I updated my previous _IPDetails() code.

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

A quick question if I may while on the topic,

Is it possible to get an adapters 'name' as in "Local Area Connection" rather than the Description -

OR is there a way to disable/enable and set ip fields using the adapter Description via the WMI as in the example?

(i'm trying to make a full basic/advanced ipconfig UI which has the option of saving presets, which would obviously need these functions and I haven't been able to find any 'stable' ways of doing it)

Edited by katoNkatoNK
Link to comment
Share on other sites

Perhaps this?

Func _GetNetworkID($sAdapter)
    Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")
    Local $oColItems = $oWMIService.ExecQuery('Select * From Win32_NetworkAdapter Where Name = "' & $sAdapter & '"', "WQL", 0x30)
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            Return $oObjectItem.NetConnectionID
        Next
    EndIf
    Return SetError(1, 0, "Unknown")
EndFunc   ;==>_GetNetworkID

Example 3:

#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6
#include <Array.au3>

Global $aArray = _IPDetails(), $sData
_ArrayDisplay($aArray)

For $A = 1 To $aArray[0][0]
    $sData &= "Description: " & $aArray[$A][0] & @CRLF & "IP Address: " & $aArray[$A][1] & @CRLF & "MAC: " & _
            $aArray[$A][2] & @CRLF & "Default Gateway: " & $aArray[$A][3] & @CRLF & "DNS Servers: " & $aArray[$A][4] & @CRLF & "Connection Name: " & _GetNetworkID($aArray[$A][0]) & @CRLF & @CRLF
Next
$sData = StringTrimRight($sData, 4)

MsgBox(0, "_IPDetails()", $sData)

Func _IPDetails()
    Local $iCount = 0
    Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")
    Local $oColItems = $oWMIService.ExecQuery("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True", "WQL", 0x30), $aReturn[1][5] = [[0, 5]]
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            $aReturn[0][0] += 1
            $iCount += 1

            If $aReturn[0][0] <= $iCount + 1 Then
                ReDim $aReturn[$aReturn[0][0] * 2][$aReturn[0][1]]
            EndIf

            $aReturn[$iCount][0] = _IsString($oObjectItem.Description)
            $aReturn[$iCount][1] = _IsString($oObjectItem.IPAddress(0))
            $aReturn[$iCount][2] = _IsString($oObjectItem.MACAddress)
            $aReturn[$iCount][3] = _IsString($oObjectItem.DefaultIPGateway(0))
            $aReturn[$iCount][4] = _IsString(_WMIArrayToString($oObjectItem.DNSServerSearchOrder(), " - ")) ; You could use _ArrayToString() but I like creating my own Functions especially when I don't need alot of error checking.
        Next
        ReDim $aReturn[$aReturn[0][0] + 1][$aReturn[0][1]]
        Return $aReturn
    EndIf
    Return SetError(1, 0, $aReturn)
EndFunc   ;==>_IPDetails

Func _GetNetworkID($sAdapter)
    Local $oWMIService = ObjGet("winmgmts:{impersonationLevel = impersonate}!\\" & "." & "\root\cimv2")
    Local $oColItems = $oWMIService.ExecQuery('Select * From Win32_NetworkAdapter Where Name = "' & $sAdapter & '"', "WQL", 0x30)
    If IsObj($oColItems) Then
        For $oObjectItem In $oColItems
            Return $oObjectItem.NetConnectionID
        Next
    EndIf
    Return SetError(1, 0, "Unknown")
EndFunc   ;==>_GetNetworkID

Func _IsString($sString)
    If IsString($sString) Then
        Return $sString
    EndIf
    Return "Not Available"
EndFunc   ;==>_IsString

Func _WMIArrayToString($aArray, $sDelimeter = "|")
    If IsArray($aArray) = 0 Then
        Return SetError(1, 0, "Not Available")
    EndIf
    Local $iUbound = UBound($aArray) - 1, $sString
    For $A = 0 To $iUbound
        $sString &= $aArray[$A] & $sDelimeter
    Next
    Return StringTrimRight($sString, StringLen($sDelimeter))
EndFunc   ;==>_WMIArrayToString

Note: For some reason its a little slow, but I'm not a WMI Expert!

Edited by guinness

UDF List:

 
_AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples...

Updated: 22/04/2018

Link to comment
Share on other sites

Thank you for the quick reply :unsure:

I actually forgot about 'ConnectionID' after having a look through WMI parameters, but a full working example is much appreciated!!

I do have another question..for interests sake

Is it possible to do all the functions as if i were to do it in a command line such as the 'netsh' parameters and the other relevant adapter functions in WMI or something else without needing a mass of code?

If not what would be the most reliable way of doing all the 'netsh' commands or the like, if other than cmd prompt?

(I don't expect you to code up anything for a reply but ofc it would be helpful, or even just a mass of references :> )

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...