Jump to content
Xavia

how do I determine a certain driver is present? [SOLVED]

Recommended Posts

Xavia

for example if the driver Intel(R) Technology Access TAP Driver (NDIS 6.30) is there, a message box will prompt that the driver is there, but if its not there the message box will prompt that the driver is not present.

I am slowly dying trying to figure this out.

 

*note: this script will be used in different pcs so it may vary if there is a driver or not

aaaa.png

Edited by Xavia

Share this post


Link to post
Share on other sites
water

; Generated by AutoIt Scriptomatic

$wbemFlagReturnImmediately = 0x10
$wbemFlagForwardOnly = 0x20
$colItems = ""
$strComputer = "localhost"

$Output=""
$Output = $Output & "Computer: " & $strComputer  & @CRLF
$Output = $Output & "==========================================" & @CRLF
$objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\")
$colItems = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapter", "WQL", _
                                          $wbemFlagReturnImmediately + $wbemFlagForwardOnly)

If IsObj($colItems) then
   For $objItem In $colItems
      $Output = $Output & "AdapterType: " & $objItem.AdapterType & @CRLF
      $Output = $Output & "AdapterTypeId: " & $objItem.AdapterTypeId & @CRLF
      $Output = $Output & "AutoSense: " & $objItem.AutoSense & @CRLF
      $Output = $Output & "Availability: " & $objItem.Availability & @CRLF
      $Output = $Output & "Caption: " & $objItem.Caption & @CRLF
      $Output = $Output & "ConfigManagerErrorCode: " & $objItem.ConfigManagerErrorCode & @CRLF
      $Output = $Output & "ConfigManagerUserConfig: " & $objItem.ConfigManagerUserConfig & @CRLF
      $Output = $Output & "CreationClassName: " & $objItem.CreationClassName & @CRLF
      $Output = $Output & "Description: " & $objItem.Description & @CRLF
      $Output = $Output & "DeviceID: " & $objItem.DeviceID & @CRLF
      $Output = $Output & "ErrorCleared: " & $objItem.ErrorCleared & @CRLF
      $Output = $Output & "ErrorDescription: " & $objItem.ErrorDescription & @CRLF
      $Output = $Output & "GUID: " & $objItem.GUID & @CRLF
      $Output = $Output & "Index: " & $objItem.Index & @CRLF
      $Output = $Output & "InstallDate: " & WMIDateStringToDate($objItem.InstallDate) & @CRLF
      $Output = $Output & "Installed: " & $objItem.Installed & @CRLF
      $Output = $Output & "InterfaceIndex: " & $objItem.InterfaceIndex & @CRLF
      $Output = $Output & "LastErrorCode: " & $objItem.LastErrorCode & @CRLF
      $Output = $Output & "MACAddress: " & $objItem.MACAddress & @CRLF
      $Output = $Output & "Manufacturer: " & $objItem.Manufacturer & @CRLF
      $Output = $Output & "MaxNumberControlled: " & $objItem.MaxNumberControlled & @CRLF
      $Output = $Output & "MaxSpeed: " & $objItem.MaxSpeed & @CRLF
      $Output = $Output & "Name: " & $objItem.Name & @CRLF
      $Output = $Output & "NetConnectionID: " & $objItem.NetConnectionID & @CRLF
      $Output = $Output & "NetConnectionStatus: " & $objItem.NetConnectionStatus & @CRLF
      $Output = $Output & "NetEnabled: " & $objItem.NetEnabled & @CRLF
      $strNetworkAddresses = $objItem.NetworkAddresses(0)
      $Output = $Output & "NetworkAddresses: " & $strNetworkAddresses & @CRLF
      $Output = $Output & "PermanentAddress: " & $objItem.PermanentAddress & @CRLF
      $Output = $Output & "PhysicalAdapter: " & $objItem.PhysicalAdapter & @CRLF
      $Output = $Output & "PNPDeviceID: " & $objItem.PNPDeviceID & @CRLF
      $strPowerManagementCapabilities = $objItem.PowerManagementCapabilities(0)
      $Output = $Output & "PowerManagementCapabilities: " & $strPowerManagementCapabilities & @CRLF
      $Output = $Output & "PowerManagementSupported: " & $objItem.PowerManagementSupported & @CRLF
      $Output = $Output & "ProductName: " & $objItem.ProductName & @CRLF
      $Output = $Output & "ServiceName: " & $objItem.ServiceName & @CRLF
      $Output = $Output & "Speed: " & $objItem.Speed & @CRLF
      $Output = $Output & "Status: " & $objItem.Status & @CRLF
      $Output = $Output & "StatusInfo: " & $objItem.StatusInfo & @CRLF
      $Output = $Output & "SystemCreationClassName: " & $objItem.SystemCreationClassName & @CRLF
      $Output = $Output & "SystemName: " & $objItem.SystemName & @CRLF
      $Output = $Output & "TimeOfLastReset: " & WMIDateStringToDate($objItem.TimeOfLastReset) & @CRLF
      if Msgbox(1,"WMI Output",$Output) = 2 then ExitLoop
      $Output=""
   Next
Else
   Msgbox(0,"WMI Output","No WMI Objects Found for class: " & "Win32_NetworkAdapter" )
Endif


Func WMIDateStringToDate($dtmDate)

    Return (StringMid($dtmDate, 5, 2) & "/" & _
    StringMid($dtmDate, 7, 2) & "/" & StringLeft($dtmDate, 4) _
    & " " & StringMid($dtmDate, 9, 2) & ":" & StringMid($dtmDate, 11, 2) & ":" & StringMid($dtmDate,13, 2))
EndFunc

This little script (generated by Scriptomatic - which can be found in the Example Scripts forum) generates a list of adapters. Modify this to your needs and check for the required adapter.

  • Like 1

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2018-10-19 - Version 1.4.10.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (2018-10-31 - Version 1.3.4.1) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
 
Tutorials:

ADO - Wiki

 

Share this post


Link to post
Share on other sites
Xavia

 

expandcollapsepopup
; Generated by AutoIt Scriptomatic

$wbemFlagReturnImmediately = 0x10
$wbemFlagForwardOnly = 0x20
$colItems = ""
$strComputer = "localhost"

$Output=""
$Output = $Output & "Computer: " & $strComputer  & @CRLF
$Output = $Output & "==========================================" & @CRLF
$objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\")
$colItems = $objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapter", "WQL", _
                                          $wbemFlagReturnImmediately + $wbemFlagForwardOnly)

If IsObj($colItems) then
   For $objItem In $colItems
      $Output = $Output & "AdapterType: " & $objItem.AdapterType & @CRLF
      $Output = $Output & "AdapterTypeId: " & $objItem.AdapterTypeId & @CRLF
      $Output = $Output & "AutoSense: " & $objItem.AutoSense & @CRLF
      $Output = $Output & "Availability: " & $objItem.Availability & @CRLF
      $Output = $Output & "Caption: " & $objItem.Caption & @CRLF
      $Output = $Output & "ConfigManagerErrorCode: " & $objItem.ConfigManagerErrorCode & @CRLF
      $Output = $Output & "ConfigManagerUserConfig: " & $objItem.ConfigManagerUserConfig & @CRLF
      $Output = $Output & "CreationClassName: " & $objItem.CreationClassName & @CRLF
      $Output = $Output & "Description: " & $objItem.Description & @CRLF
      $Output = $Output & "DeviceID: " & $objItem.DeviceID & @CRLF
      $Output = $Output & "ErrorCleared: " & $objItem.ErrorCleared & @CRLF
      $Output = $Output & "ErrorDescription: " & $objItem.ErrorDescription & @CRLF
      $Output = $Output & "GUID: " & $objItem.GUID & @CRLF
      $Output = $Output & "Index: " & $objItem.Index & @CRLF
      $Output = $Output & "InstallDate: " & WMIDateStringToDate($objItem.InstallDate) & @CRLF
      $Output = $Output & "Installed: " & $objItem.Installed & @CRLF
      $Output = $Output & "InterfaceIndex: " & $objItem.InterfaceIndex & @CRLF
      $Output = $Output & "LastErrorCode: " & $objItem.LastErrorCode & @CRLF
      $Output = $Output & "MACAddress: " & $objItem.MACAddress & @CRLF
      $Output = $Output & "Manufacturer: " & $objItem.Manufacturer & @CRLF
      $Output = $Output & "MaxNumberControlled: " & $objItem.MaxNumberControlled & @CRLF
      $Output = $Output & "MaxSpeed: " & $objItem.MaxSpeed & @CRLF
      $Output = $Output & "Name: " & $objItem.Name & @CRLF
      $Output = $Output & "NetConnectionID: " & $objItem.NetConnectionID & @CRLF
      $Output = $Output & "NetConnectionStatus: " & $objItem.NetConnectionStatus & @CRLF
      $Output = $Output & "NetEnabled: " & $objItem.NetEnabled & @CRLF
      $strNetworkAddresses = $objItem.NetworkAddresses(0)
      $Output = $Output & "NetworkAddresses: " & $strNetworkAddresses & @CRLF
      $Output = $Output & "PermanentAddress: " & $objItem.PermanentAddress & @CRLF
      $Output = $Output & "PhysicalAdapter: " & $objItem.PhysicalAdapter & @CRLF
      $Output = $Output & "PNPDeviceID: " & $objItem.PNPDeviceID & @CRLF
      $strPowerManagementCapabilities = $objItem.PowerManagementCapabilities(0)
      $Output = $Output & "PowerManagementCapabilities: " & $strPowerManagementCapabilities & @CRLF
      $Output = $Output & "PowerManagementSupported: " & $objItem.PowerManagementSupported & @CRLF
      $Output = $Output & "ProductName: " & $objItem.ProductName & @CRLF
      $Output = $Output & "ServiceName: " & $objItem.ServiceName & @CRLF
      $Output = $Output & "Speed: " & $objItem.Speed & @CRLF
      $Output = $Output & "Status: " & $objItem.Status & @CRLF
      $Output = $Output & "StatusInfo: " & $objItem.StatusInfo & @CRLF
      $Output = $Output & "SystemCreationClassName: " & $objItem.SystemCreationClassName & @CRLF
      $Output = $Output & "SystemName: " & $objItem.SystemName & @CRLF
      $Output = $Output & "TimeOfLastReset: " & WMIDateStringToDate($objItem.TimeOfLastReset) & @CRLF
      if Msgbox(1,"WMI Output",$Output) = 2 then ExitLoop
      $Output=""
   Next
Else
   Msgbox(0,"WMI Output","No WMI Objects Found for class: " & "Win32_NetworkAdapter" )
Endif


Func WMIDateStringToDate($dtmDate)

    Return (StringMid($dtmDate, 5, 2) & "/" & _
    StringMid($dtmDate, 7, 2) & "/" & StringLeft($dtmDate, 4) _
    & " " & StringMid($dtmDate, 9, 2) & ":" & StringMid($dtmDate, 11, 2) & ":" & StringMid($dtmDate,13, 2))
EndFunc

 

This little script (generated by Scriptomatic - which can be found in the Example Scripts forum) generates a list of adapters. Modify this to your needs and check for the required adapter.

​Thanks Water~

Share this post


Link to post
Share on other sites
water

:)


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2018-10-19 - Version 1.4.10.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (2018-10-31 - Version 1.3.4.1) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
 
Tutorials:

ADO - Wiki

 

Share this post


Link to post
Share on other sites
argumentum

 

expandcollapsepopup
; Generated by AutoIt Scriptomatic
...
      $strNetworkAddresses = $objItem.NetworkAddresses(0)
....
      $strPowerManagementCapabilities = $objItem.PowerManagementCapabilities(0)
This little script (generated by Scriptomatic - which can be found in the Example Scripts forum) generates a list of adapters. Modify this to your needs and check for the required adapter.

​I am fixing up the code of the original scriptomatic and in case of an array, it just shows the first entry. In the original HTA code it uses a function called "_join" that did not get translated to au3. In the updates I've made, I've included this function.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×