Jump to content
Sign in to follow this  
Newb

[Solved]Select statement with true/false return value always returns false

Recommended Posts

Newb

I'm a bit ashamed of asking this but....

I can't figure out why a simple select statement which checks a variable which contains mouse coordinates doesn't work while used with a Select Statement, while it works with an If-Else conditional statement. Select statements always returns false or 0.

This isn't working

Func StartIt()
    If CanIStart() Then
        MsgBox(0, "jj", "Start " & CanIStart())
    Else
        MsgBox(0, "Kk", "NoStart" & CanIStart())
    EndIf

EndFunc   ;==>StartIt

Func CanIStart()
    Select
        Case UBound($M1Pos)<1
            Return False
        Case UBound($M2Pos)<1
            Return False
        Case UBound($M3Pos)<1
            Return False
        Case UBound($M4Pos)<1
            Return False
    EndSelect
EndFunc   ;==>CanIStart

 

While this does the job pretty well

Func StartIt()
    If CanIStart() Then
        MsgBox(0, "jj", "Start " & CanIStart())
    Else
        MsgBox(0, "Kk", "NoStart" & CanIStart())
    EndIf

EndFunc   ;==>StartIt

Func CanIStart()
    If UBound($M1Pos)<1 Then
        Return False
    ElseIf UBound($M2Pos)<1 Then
        Return False
    ElseIf UBound($M3Pos)<1 Then
        Return False
    ElseIf UBound($M4Pos)<1 Then
        Return False
    Else
        Return True
    EndIf
EndFunc   ;==>CanIStart

 

 

Thanks
 

Edited by Newb

I'm a compulsive poster. When I post something, come to read it at least 5 minutes later after the posting, because I will edit it. I edited even this signature a few minutes later after I wrote it.

Share this post


Link to post
Share on other sites
Newb

Ok shame on me for not noticing. Sorry and thank you


I'm a compulsive poster. When I post something, come to read it at least 5 minutes later after the posting, because I will edit it. I edited even this signature a few minutes later after I wrote it.

Share this post


Link to post
Share on other sites
Exit

@Newb    glad to help. Please mark the thread as solved, ... and perhaps a 'like this' to my answer.

  • Like 1

My UDFs, Abbrevs and Snippets
If you like my post, just click the like button :) 

Share this post


Link to post
Share on other sites
Newb

Done. Thanks

  • Like 2

I'm a compulsive poster. When I post something, come to read it at least 5 minutes later after the posting, because I will edit it. I edited even this signature a few minutes later after I wrote it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Ambient
      By Ambient
      I am trying to build a list from a query run against a sybase db. This part works fine. My problem is this, I want to display values in a list depending 
      on the value of certain fields  i.e. See below which works for two. Unfortunately, I need it to work for 3 values.  I don't know how I can do this for 3.  I did try doing a select case but I was getting errors.
       
      i.e. if value =0  then "Card Check" if Value = - Then "Card Spend" Else "Money Added"
      The below immediate iif works brilliantly for two but as I say I need to build this with 3 different values. 
       
       
      $idItem = GUICtrlCreateListViewItem( _iif($adoRs.Fields("TransactionAmount").value =0, "Card check","Money Added") 
       
      Any help appreciated.
    • Fr33b0w
      By Fr33b0w
      Func z009() If FileExists("search\009\009.au3") Then #include <search\009\009.au3> EndIf EndFunc This wont work...  Is there any workarround for this or I should do it in a different way?
       
    • damon
      By damon
      @JLogan3o13 I apologize, I did not think of it that way.  I have attached all the code and the Ini File information.  Please let me know if I need to add anything else to help understand what is happening.  thank you.
       
       
       
      Guys, I apologize in advance as I did not search for my answer before posting.  I just could not figure out a way to search that made since so I decided to go ahead and post my question.
       
      Getting to it.
      Background: this is being used to validate file names before moving to a new location.  though i have not included all the code, below is what i am having a problem with.
       I have an ini file that i am reading values from. Func ConfigDefineVars() -- I read the value of $ValidationRDA and everything is good then I set 
      $CaseRDALocationCheck = '$SplitFile[$ValidationRDALocation]' <> $ValidationRDA
      the code that will be used in the select case in Func FileSplitCount().  The problem i have is that even though the numbers = each other they are not recognizing as =.  
      This is what i am getting in my log file i create.
      2017-12-04 14:09:53 : RDA was 2403 should have been 2403:
      If I move $SplitFile[$ValidationRDALocation] <> $ValidationRDA to the Case line under the function it works correctly.
       
      I think this has to do with my use of ' ' around the '$SplitFile[$ValidationRDALocation]' but  i don't know what option i have in Func ConfigDefineVars I am not ready to define $SplitFile.  I have tried adding it to my Global Vars at the top of my script but that did not seem to help.
      There will be more fail this is just the first one in the select case.
       
      Any help or ideas would be greatly appreciated.
       
      thanks,
      Damon
      Example of a filename used.
      DWRSSD-37087-95-026.%-064.00-Tatum Family %-%-1230 Academy Rd-%-PERM-TRUE-2403.pdf
      This file will fail on the 95, it should be 095.  The problem i am getting is with the 2403 it fails even though the ini file value ValidationRDA = 2403 
       
       
      Ini File:
      [SSD_FolderPaths]
      pendingFolder=C:\Users\bg01152\Desktop\SSD Test\pending
      reviewFolder=C:\Users\bg01152\Desktop\SSD Test\review
      completedFolder=C:\Users\bg01152\Desktop\SSD Test\Completed
      FileNetProperties=DocumentTitle,ZipCode,County,MapAndGroupID,ParcelID,PropertyOwner,Subdivision,StreetAddress,LotNumber,DocumentType,Approved,RDANumber
      ValidationDocumentTitle=DWRSSD
      ValidationDocumentTitleLocation=1
      ValidationCountyCodeLocation=3
      ValidationRDA=2403
      ValidationRDALocation=12
      Validation3=TRUE
      Validation3Location=11
      Validation4=PERM
      Validation4Location=10
       
       
      #include <Array.au3> #include <File.au3> #include <MsgBoxConstants.au3> ;------------Global Vars --------------------- Global $SplitFile, $aFileList, $FileLog, $dFolder, $sFolder, $cFolder, $ConfigFile, $t Global $ValidationDocumentTitle, $ValidationDocumentTitleLocation, $ValidationCountyCodeLocation, $ValidationRDA Global $ValidationRDALocation, $Validation3, $Validation3Location, $Validation4, $Validation4Location, $FileNetPropertiesSplit Global $CaseCountyCheck, $CaseRDALocationCheck, $CaseValidation3LocationCheck, $CaseValidation4LocationCheck, $SplitFile ;;--------------------------------Check and Read Config files-------------------------------- $SysConfigFile = @ScriptDir & "\SysConfig.ini" ;----------------PreCheck for Config File-------------- If FileExists ($SysConfigFile) <> 1 Then Exit EndIf ;----------------End PreCheck-------------------------- $FileNetEXE = @ScriptDir & "\" & IniRead ($SysConfigFile, "FileNetUploader","FileName","") $delimiter = IniRead ($SysConfigFile, "FileInformation", "Delimiter","") $Filter = IniRead ($SysConfigFile, "FileInformation", "Filter", "") $ConfigFile = @ScriptDir & "\Config.ini" ;----------------PreCheck for Config File-------------- If FileExists ($ConfigFile) <> 1 Then Exit EndIf ;----------------End PreCheck-------------------------- ;;-------------------------------------------------------------------------------------------- $Sections = IniReadSectionNames ($ConfigFile) ;MsgBox (0,"test", $Sections[0] & @CRLF & $Sections[1] & @CRLF & $Sections[2] & @CRLF & $Sections[3] & @CRLF & $Sections[4]);TESTING ONLY - DELETE WHEN DONE $p = 0 Do $t = 0 ;used for precheck $p = $p + 1 ConfigDefineVars($Sections[$p]) ;MsgBox(0,"ConfigDefineVars", $sFolder & @CRLF & $dFolder & @CRLF & $cFolder);TESTING ONLY - DELETE WHEN DONE PreCheck($dFolder, $sFolder, $cFolder) ;Runs a Pre-check to make sure folder structure exists before running the program If $t = 0 Then ;MsgBox(0,"PreCheck Run", "Running next functions");TESTING ONLY - DELETE WHEN DONE ListArray($sFolder, $Filter) ;Puts File Names in String Array ;_ArrayDisplay ($aFileList, $Sections[$p]) If $t = 0 Then FileSplitCount($dFolder, $aFileList) ;Takes filename String Array and splits by $delimiter ;MsgBox(0,"PreCheck Run2", "Running split function");TESTING ONLY - DELETE WHEN DONE Else ;MsgBox(0,"PreCheck Run2", "Skipping split function");TESTING ONLY - DELETE WHEN DONE EndIf Else ;MsgBox(0,"PreCheck Run", "Skipping next functions");TESTING ONLY - DELETE WHEN DONE EndIf Until $p = $Sections[0] ExitScript() ;Exit script Function Func ConfigDefineVars($SectionsNum);Defines Variables from config file Sections $sFolder = IniRead ($ConfigFile, $SectionsNum, "pendingFolder","") ;Pending Folder, Folder that is awaiting the process $dFolder = IniRead ($ConfigFile, $SectionsNum, "reviewFolder","") ;Review Folder, Files that did not pass validation check and division needs to review $cFolder = IniRead ($ConfigFile, $SectionsNum, "completedFolder","") ;Completed Folder, Once process is completed this would be location files get moved to $FileNetProperties = IniRead ($ConfigFile, $SectionsNum, "FileNetProperties","") $FileNetPropertiesSplit = StringSplit ($FileNetProperties,",") $ValidationDocumentTitle = IniRead ($ConfigFile, $SectionsNum, "ValidationDocumentTitle","") $ValidationDocumentTitleLocation = IniRead ($ConfigFile, $SectionsNum, "ValidationDocumentTitleLocation","") $ValidationCountyCodeLocation = IniRead ($ConfigFile, $SectionsNum, "ValidationCountyCodeLocation","") $ValidationRDA = IniRead ($ConfigFile, $SectionsNum, "ValidationRDA","") $ValidationRDALocation = IniRead ($ConfigFile, $SectionsNum, "ValidationRDALocation","") $Validation3 = IniRead ($ConfigFile, $SectionsNum, "Validation3","") $Validation3Location = IniRead ($ConfigFile, $SectionsNum, "Validation3Location","") $Validation4 = IniRead ($ConfigFile, $SectionsNum, "Validation4","") $Validation4Location = IniRead ($ConfigFile, $SectionsNum, "Validation4Location","") If $ValidationCountyCodeLocation = 999 Then $CaseCountyCheck = 1 <> 1 Else ;MsgBox (0,"test of county code", "location = " &$ValidationCountyCodeLocation) $CaseCountyCheck = StringLen('$SplitFile[$ValidationCountyCodeLocation]') <> 3 ; Checks for 3 digit County Code EndIf If $ValidationRDALocation = 999 Then $CaseRDALocationCheck = 1 <> 1 Else $CaseRDALocationCheck = '$SplitFile[$ValidationRDALocation]' <> $ValidationRDA ; Checks for 4 Digit RDA EndIf If $Validation3Location = 999 Then $CaseValidation3LocationCheck = 1 <> 1 Else $CaseValidation3LocationCheck = '$SplitFile[$Validation3Location]' <> $Validation3 ; Checks that Approved = True EndIf If $Validation4Location = 999 Then $CaseValidation4LocationCheck = 1 <> 1 Else $CaseValidation3LocationCheck = '$SplitFile[$Validation4Location]' <> $Validation4 ; Checks that Document Type = PERM EndIf EndFunc Func ValidationCheck ($check1) $blank = StringLen ($check1) If $check1 Then EndIf EndFunc Func PreCheck($dFolder, $sFolder, $cFolder) ;----------------PreCheck for Destination Folder-------------- If FileExists ($dFolder) <> 1 Then $t = 1 Return Else $FileLog = FileOpen($dFolder & "\FileLog.log", 1) EndIf ;----------------End PreCheck-------------------------- ;----------------PreCheck for Source Folder-------------- If FileExists ($sFolder) <> 1 Then _FileWriteLog($FileLog, "Path to Pending Folder -- " & $sFolder & " -- does not exist") $t = 1 Return EndIf ;----------------End PreCheck-------------------------- ;----------------PreCheck for Completed Folder--------- If FileExists ($cFolder) <> 1 Then _FileWriteLog($FileLog, "Path to Completed Folder -- " & $cFolder & " -- does not exist") $t = 1 Return EndIf ;----------------End PreCheck-------------------------- EndFunc Func ListArray($sFolder, $Filter) $aFileList = _FileListToArray($sFolder, $Filter, 1) ;Create an array of files from the source folder filtering by filetype ;in the config.ini files for the specified section If @error = 1 Then ;MsgBox($MB_SYSTEMMODAL, "", "Path was invalid.") _FileWriteLog($FileLog, "Path to File(s) is Invalid") $t = 1 Return EndIf If @error = 4 Then ;MsgBox($MB_SYSTEMMODAL, "", "No file(s) were found.") _FileWriteLog($FileLog, "No File(s) were found, exiting.") $t = 1 Return EndIf EndFunc ;==>ListArray  
       
       
       
    • hcI
      By hcI
      Hello
      Today I'm working on listbox but there might be something that I'm missing...
      I made a little script that allow the user to swap 2 items for the listbox. So the user select for example the 3rd item, press the button "Up" and it switch with the 2nd one, same with the "Down" button that switch with the 4th one.
      But when I select the 3rd item and switch it the item become unselected and I would like to select it again after the manipulation :
      As you can see in the comment of the script, _GUICtrlListBox_SetSel don't highlight/select them once the swap process is done..
      What am I missing ?
    • chacoya121
      By chacoya121
      can anyone help me plz
      how can you put mouseclick in if statement or is it possible
      example:
      if Mouseclick = "left" then Tooltip(" you click left mouse") thank you
×