Sign in to follow this  
Followers 0
DrAhmed

[Solved] Get stream size

4 posts in this topic

#1 ·  Posted (edited)

Hey

I was looking for methode to get the stream size of a picture from memory , wihtout need to write stream data to disk the then use filegetsize 

Thats what I am trying to do

#include <gdiplus.au3>
#include <memory.au3>
#include <staticconstants.au3>

_GDIPlus_Startup()

Global $ghGDIPDLL = $__g_hGDIPDll

While 1

$data = Desk_Stream(50)
$data2 = StringSplit($data, "|")

$My_Stream_Size = $data2[0]
$My_Stream = $data2[1]

;.
;..
;... 

    Sleep(1000)
WEnd

_GDIPlus_Shutdown()



Func Desk_Stream($Q)

    Local $hHBmp = _ScreenCapture_Capture("") ;create a GDI bitmap by capturing my desktop

    Local $hBitmap = _GDIPlus_BitmapCreateFromHBITMAP($hHBmp) ;convert GDI bitmap to GDI+ bitmap

    Local $hBitmap_Scaled = _GDIPlus_ImageResize($hBitmap, @DesktopWidth / 2, @DesktopHeight / 2) ;resize image

    $sStream_Data = _GDIPlus_StreamImage2BinaryString($hBitmap_Scaled, $sQ, False, '') ;coded by UEZ 2013 build 2014-01-25; based on the code

    ;release resources otherwise memory leak
    _WinAPI_DeleteObject($hHBmp)
    _GDIPlus_ImageDispose($hBitmap)
    _GDIPlus_ImageDispose($hBitmap_Scaled)
    
    
      Local $data_size = GetStreamSize($sStream_Data)


    Return $data_size & "|" & $sStream_Data 
EndFunc   ;==>Desk_Stream



Func _GDIPlus_StreamImage2BinaryString($hBitmap, $iQuality, $bSave, $sFilename) ;coded by UEZ 2013 build 2014-01-25; based on the code by Andreik
    Local $sImgCLSID, $tGUID, $tParams, $tData
    $sFormat = "JPG"

    $sImgCLSID = _GDIPlus_EncodersGetCLSID($sFormat)
    $tGUID = _WinAPI_GUIDFromString($sImgCLSID)
    $tData = DllStructCreate("int Quality")
    DllStructSetData($tData, "Quality", $iQuality) ;quality 0-100
    Local $pData = DllStructGetPtr($tData)
    $tParams = _GDIPlus_ParamInit(1)
    _GDIPlus_ParamAdd($tParams, $GDIP_EPGQUALITY, 1, $GDIP_EPTLONG, $pData)


    Local $hStream = _WinAPI_CreateStreamOnHGlobal() ;http://msdn.microsoft.com/en-us/library/ms864401.aspx
    If @error Then Return SetError(2, 0, 0)
    _GDIPlus_ImageSaveToStream($hBitmap, $hStream, DllStructGetPtr($tGUID), DllStructGetPtr($tParams))
    If @error Then Return SetError(3, 0, 0)

    Local $hMemory = _WinAPI_GetHGlobalFromStream($hStream) ;http://msdn.microsoft.com/en-us/library/aa911736.aspx
    If @error Then Return SetError(4, 0, 0)
    Local $iMemSize = _MemGlobalSize($hMemory)
    If Not $iMemSize Then Return SetError(5, 0, 0)
    Local $pMem = _MemGlobalLock($hMemory)
    $tData = DllStructCreate("byte[" & $iMemSize & "]", $pMem)
    Local $bData = DllStructGetData($tData, 1)
    _WinAPI_ReleaseStream($hStream) ;http://msdn.microsoft.com/en-us/library/windows/desktop/ms221473(v=vs.85).aspx

    _MemGlobalFree($hMemory)

    Return $bData

EndFunc   ;==>_GDIPlus_StreamImage2BinaryString

Func GetStreamSize($data) ; ??

EndFunc

 

Edited by DrAhmed

Share this post


Link to post
Share on other sites



I think you have what you need inside your own code:

Local $iMemSize = _MemGlobalSize($hMemory)

So you could use $GetStreamSize = _MemGlobalSize($bData)

I'm not sure but I think it probably work.

Another way is to analyze RGB data of the image, I don't know if _GDIPlus can do that.

Interesting information here:
http://www.scantips.com/basics1d.html

Regards
Alien.

1 person likes this

Share this post


Link to post
Share on other sites
4 hours ago, DrAhmed said:

Local $data_size = GetStreamSize($sStream_Data)

This should do it:

Local $data_size = GetStreamSize($sStream_Data)
MsgBox(0, "", BinaryLen($data_size) & " bytes")

 

2 people like this

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites
1 hour ago, UEZ said:

This should do it:

Local $data_size = GetStreamSize($sStream_Data)
MsgBox(0, "", BinaryLen($data_size) & " bytes")

 

Oh I missed that .. It works great , thanks man :) 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • fatpig
      By fatpig
      Dear AutoIT Community.
      I am currently working on a program that will display lots of images in a scroll down GUI.
      I create the GUI based on the number of images, which works fine.
      But all images I place using GuiCtrlCreatePic above a threshold of around 32000 pixels (cant say exactly) are placed at negative locations and finally will reach 0 again
      and will then populate on top of the images placed there before.
      For $i = 1 To $Images[0] ; Get picture dimensions $hImage = _GDIPlus_ImageLoadFromFile($ImgRep & $Images[$i]) $iX = _GDIPlus_ImageGetWidth($hImage) $iY = _GDIPlus_ImageGetHeight($hImage) _GDIPlus_ImageDispose($hImage) ; Resize & place images in GUI $Pic[$i] = GUICtrlCreatePic($ImgRep & $Images[$i], $Spacer, Round($yPos, 0), $MaxImgWidth, $MaxImgWidth * ($iY / $iX)) $yPos = $yPos + $MaxImgWidth * ($iY / $iX) + $Spacer $log = $log & "|" & $yPos $currentlut = $Images[1] Next I have found a limit at 32767 pixels for some GUI elements when googling around.
      Can someone tell me how to circumvent that?
      thanks!
      cheers
      Felix
    • Skeletor
      By Skeletor
      MS Splash Screens
      The office 2016/17 office suite has made many people turn heads with its functions and especially their splash screen.
      I now present to you, the MS Style Splash Screen. For Rookies, Novices and anyone who wants a ready made splash screen for your gui application.

      You can now download it and also try it out yourself.
      You have three colors to choose from:
      Blue
      Red
      Green
      All three colours are from the famous programs.
      I also included the KODA form to you can have freedom with this splash screen.
      Note: the KODA form does not have the three colours as well as the correct blue. 

      Have fun and enjoy.
      Note:
      I will update the splash to add the automated 3 dots animation at a later stage. 
       
       
    • DeathChicken
      By DeathChicken
      If possible please add or edit the comments to explain how this works.
       
      ;includes functions from other things
      #include <GDIPlus.au3>
      #include <ScreenCapture.au3>
      ;hotkeys
      HotKeySet("{ESC}", _exit)
      HotKeySet("{F1}", _scan)
      ;global variables
      Global $win_title                    ;name of the window
      Global $area_x                        ;
      Global $area_y                        ;
      Global $area_w                       ;
      Global $area_h                        ;
      Global $cursor                         ;
      Global $rect_file                      ;
      Global $hbmpscreen              ;
      Global $i=  1043                      ;moves the rect
      Global $ii=    378                      ;moves the rect
      Global $x=1044                        ;inner rect offset
      Global $y=501                          ;inner rect offset
      Global $hbmprect                    ;image inside rect
      Global $hscreen                        ;image whole screen
                                         
      _GDIPlus_Startup()                    ;?
      ;display hotkeys on screen
      ToolTip("Press F1 to scan | Press ESC to Exit",0,0)
                                          ;infinite loop to keep prog running
      While 1
          Sleep(100)
      WEnd
      Func _scan()
      ;~ reads your screen area:
      _read()
      ;~ converts screen captured into bmp
      _convert()
      ;~ .  Loads converted bmp to be read
      _loadBMP()
      ;~ compares the bmp of your scanned screen to the actual screen that is being displayed
      _compare()
      EndFunc
                                          ;reads screen
      Func _read()
          $hscreen = _ScreenCapture_CaptureWnd("", WinGetHandle($win_title), $area_x, $area_y, $area_x + $area_w, $area_y + $area_h, $cursor)
      EndFunc
                                          ;converts screen into bmp
      Func _convert()
          _GDIPlus_BitmapCreateFromHBITMAP($hscreen)
      EndFunc
                                          ;loads converted screen
      Func _loadBMP()
      _GDIPlus_BitmapCreateFromFile($rect_file)
      EndFunc
                                          ;compares savedBMP to current screen
      Func _compare()
      ;If(                              below code                                     ) = (                   below code           ) Then
      If _GDIPlus_BitmapGetPixel($hbmpscreen, ($i + $x) - $area_x, ($ii + $y) - $area_y) = _GDIPlus_BitmapGetPixel($hbmprect, $x, $y) Then
      ;display message box titled found with a message of found
      MsgBox("","","found")
      ;if above is not correct then
      EndIf
      EndFunc
                                          ;exit func
      Func _exit()
          Exit
      EndFunc
    • GordonFreeman
      By GordonFreeman
      Hi, i searched some topics but cannot found a simple way to do that:
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> $Form1 = GUICreate("Form1", 615, 438, 192, 124) GUISetState(@SW_SHOW) ; I tried this but user reported that it work in 2006, not seems work actually $filemenu = GUICtrlCreateMenu ("&File") $fileitem = GUICtrlCreateMenuitem ("Open",$filemenu) GuiCtrlSetImage($fileitem, "shell32.dll", 4) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Also tried:
      #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> $Form1 = GUICreate("Form1", 615, 438, 192, 124) GUISetState(@SW_SHOW) $filemenu = TrayCreateMenu("&File") $fileitem = TrayCreateItem("Open",$filemenu) ;GuiCtrlSetImage($fileitem, "shell32.dll", 4) ;GuiCtrlSetImage(TrayItemGetHandle($fileitem), "shell32.dll", 4) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd Well.. thanks in advance!
       
      Ok. I found this working example from Yashied. If i cannot find a simple then i will go with it
      #Include <GUIConstantsEx.au3> #Include <GUIMenu.au3> #Include <Constants.au3> #Include <WinAPI.au3> #Include <WindowsConstants.au3> Opt('MustDeclareVars', 1) Global $hMenu, $hForm, $hFile = 1000, $idNew, $idExit $hForm = GUICreate('Menu', 400, 300) $hFile = _GUICtrlMenu_CreateMenu() _GUICtrlMenu_InsertMenuItem ($hFile, 0, ' &Favorites', $idNew) _GUICtrlMenu_InsertMenuItem ($hFile, 1, '', 0) _GUICtrlMenu_InsertMenuItem($hFile, 2, ' E&xit', $idExit) $hMenu = _GUICtrlMenu_CreateMenu() _GUICtrlMenu_InsertMenuItem($hMenu, 0, '&File', 0, $hFile) _GUICtrlMenu_SetMenu($hForm, $hMenu) _GUICtrlMenu_SetItemBmp($hFile, 0, _CreateBitmapFromIcon(_WinAPI_GetSysColor($COLOR_MENU), @SystemDir & '\shell32.dll', 43, 16, 16)) _GUICtrlMenu_SetItemBmp($hFile, 2, _CreateBitmapFromIcon(_WinAPI_GetSysColor($COLOR_MENU), @SystemDir & '\shell32.dll', 27, 16, 16)) GUISetState() Do Until GUIGetMsg() = $GUI_EVENT_CLOSE Func _CreateBitmapFromIcon($iBackground, $sIcon, $iIndex, $iWidth, $iHeight) Local $hDC, $hBackDC, $hBackSv, $hIcon, $hBitmap $hDC = _WinAPI_GetDC(0) $hBackDC = _WinAPI_CreateCompatibleDC($hDC) $hBitmap = _WinAPI_CreateSolidBitmap(0, $iBackground, $iWidth, $iHeight) $hBackSv = _WinAPI_SelectObject($hBackDC, $hBitmap) $hIcon = _WinAPI_PrivateExtractIcon($sIcon, $iIndex, $iWidth, $iHeight) If Not @error Then _WinAPI_DrawIconEx($hBackDC, 0, 0, $hIcon, 0, 0, 0, 0, $DI_NORMAL) _WinAPI_DestroyIcon($hIcon) EndIf _WinAPI_SelectObject($hBackDC, $hBackSv) _WinAPI_ReleaseDC(0, $hDC) _WinAPI_DeleteDC($hBackDC) Return $hBitmap EndFunc ;==>_CreateBitmapFromIcon Func _WinAPI_PrivateExtractIcon($sIcon, $iIndex, $iWidth, $iHeight) Local $hIcon, $tIcon = DllStructCreate('hwnd'), $tID = DllStructCreate('hwnd') Local $Ret = DllCall('user32.dll', 'int', 'PrivateExtractIcons', 'str', $sIcon, 'int', $iIndex, 'int', $iWidth, 'int', $iHeight, 'ptr', DllStructGetPtr($tIcon), 'ptr', DllStructGetPtr($tID), 'int', 1, 'int', 0) If (@error) Or ($Ret[0] = 0) Then Return SetError(1, 0, 0) EndIf $hIcon = DllStructGetData($tIcon, 1) If ($hIcon = Ptr(0)) Or (Not IsPtr($hIcon)) Then Return SetError(1, 0, 0) EndIf Return $hIcon EndFunc ;==>_WinAPI_PrivateExtractIcon Ok, i noticed that is a pain create submenu with _GUICtrlMenu_CreatePopup to do like in Tray, and Tray better located, then i need images/icon with Tray functions, some workaround?? 
    • SimTheNo1
      By SimTheNo1
      I am busy with building a solution for change monitoring of VOIP call program and to be properly automated means among others need for some limited OCR functionality. Current works of others are way too much overkill for this case what makes the need to build it myself. But to do it properly I significantly have to increase my knowledge about digital graphics management.
      For now I already have discovered here and there some mind blowing  Autoit miracles what can be achieved with Windows own possibilities to manipulate that what is output to the monitor. And as far I can judge there are 2 options to process graphics without use of any external libraries like ImageMagick, FreeImage and so on. These are:
       WinAPI  GDIPlus It is for me quite obvious to have various holes in general understanding of graphics and it is once more very clear what advantages gives consistent general study in 1 or another official institutions like University.  Cause there you are introduced into certain domain of knowledge in a way which usually has been perfected over long period of time. So you are not overloaded by stuff which requires a certain amount of information to be initially clear for you. For example, before starting to solve physics you first learn to read, count and so on and then move to subjects like physics.
      Though in my case opportunity to study in such educational system I had only for 8 years, from my 7th to 15th year of age in the country that was falling apart now Ukraine but used to be USSR, was all what it was. After have immigrated to Netherlands possibilities to study further haven't occur. And this therefor causes often various implications when going deep in that or another field of practical knowledge acquiring for any needed physical result, like programming to perform enormous amount of tasks. In this particular case automating VOIP call program.
      Anyway, right now I think the best direction to move is to concentrate on as basic as possible image management and if someone would maybe explain in general what is a pixel will definitely help. Particularly I am very curious about how to do picture manipulations in Autoit. Especially would help a lot to produce eventually following functions:
      createImage($imageFileName, $width, $height, $color) readImagePixel($imageFileName, $x, $y)  writeImagePixel($imageFileName, $x, $y) I do not know exactly how image is handled in computer but preferably above mentioned functions should deal with so far possible origin of graphics creation on computer. But nevertheless I definitely would love to hear any proposition for solution.
      The problem with explaining screenshots:
       VOIPConnect full Window  Part of Window with control to monitor for changes  Exact location of area where actual changes occur and have to be processed  It comes down to a rectangle of approximately 51 pixel wide and 7 pixel high. In fact if I get to learn as far as to be able exactly read, write and compare 2 images consistently across different computers I could narrow down then even further the area to watch as little as a square of 2-5 pixels wide. 
      To finish here is last detail about particularly no need for ultra fast solution at all. This because it is needed only once when it is first run on a new computer and to have to wait few minutes while it is being set instead of just a few seconds make no sence.
      This is it and what I too think to do beside this very particular case is to purify out beautiful generic Autoit functions for core image manipulation by using WinAPI or/and GDIPlus.