Altor

Curl, JSON and CouchDB sintax error

8 posts in this topic

#1 ·  Posted (edited)

Hi all:

I have a small problem with Curl syntax to send a POST to a CouchDB database.

I want send this:

-H Content-type: application/json -X POST http://127.0.0.1:5984/test -d {"title": "pencil"}

but this code does not work:

$code ='curl.exe -H Content-type: application/json -X POST http://127.0.0.1:5984/test -d {"title": "pencil"}'
Run(@ComSpec & " /k " & $code,"",@SW_HIDE)

but to work I have to format the line like this:

$code = 'curl -H "Content-Type: application/json" -X POST "http://127.0.0.1:5984/test" -d "{\"title\":\"pencil\"}"'
Run(@ComSpec & " /k " & $code,"",@SW_HIDE)

my question is whether this is the most correct way to write the correct code using the additional signs "  and  \   or is there some other more elegant way to do the same.

Thank's

Edited by Altor

Share this post


Link to post
Share on other sites

That looks correct to me. Copy and paste the following code to your browser's console...

var obj = {
    title: 'pencil'
}
console.log(JSON.stringify(JSON.stringify(obj)));

 


_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 04/09/2015

Share this post


Link to post
Share on other sites

Thanks guinness for your reply

In this way the code is much clearer and well structured.

What is not is how to use this code within a Autoit script, I guess it may need some UDF Json as OO_JSON.UDF

Thanks

 

Share this post


Link to post
Share on other sites

@Altor,

if you need to pass very elaborate input and/or process very elaborate output, then perhaps a JSON UDF is the best choice. but for a simple input as in your example, the easiest method is what you have already discovered: put it all in a Run().

Note #1: curl.exe is an external executable, so you do not need to use @comspec (unless /k for debugging is useful).

Note #2: when you put a JSON value, inside the HTTP content, inside a curl command-line switch, inside an AutoIt string... well, some non-standard escaping is inevitable. so yes, escape the double-quotes with a backslash. although prone to errors, for short input that is still the easiest way.

Share this post


Link to post
Share on other sites

Thanks orbs for the recommendations.

More effectively with curl it seems simple but is a little confusing if in the same line of code you need to input 10 or more registers. In the example I just put one record for simplicity the code.

It seems that the solution is to go copy and pasting. The problem that you have to be very careful because if you let some character no works and i'll go crazy for seeking the error.

Would be wonderful there was an CouchDB UDF......but  I think it is not very popular bd system than others SQL bd.

Thanks

Share this post


Link to post
Share on other sites

I would rather do this in some Node application if I were you, because JSON is supported natively, plus search npm for CouchDB.


_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 04/09/2015

Share this post


Link to post
Share on other sites

#7 ·  Posted (edited)

Ok guinnes, I did not know the  Node Package Manager and it seems a very interesting utility. I am going to study and I'll see if I can be helpful.

Thanks

Edited by Altor

Share this post


Link to post
Share on other sites

If you understand JavaScript then you should be fine.


_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 04/09/2015

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • islandspapand
      By islandspapand
      Hi All
      i am currently trying to add a function to my project that can send SMS, i have gone with Twilio for the sms service that use a REST API.
      I have never worked with an API before, and could use some help.
      I can get my function working with using cURL.exe and copy past command from the website with the following code. And thats great unfortunately i am have issue with character like æøå when sending a SMS appears like a box or ?. this does not happen if i do it from the website so it looks like a Unicode issue in curl.exe.
      I have done some searching on the forum and understand that i should be able to implement this curl command with the WinHTTP UDF from @trancexx so i don't need a third part exe and it might fix my charater issue.
      Unfortunately i really don't understand how i am to change curl commands to the WinHTTP and i was hoping some good maybe give me an example i could learn from.
      Thanks in advanced
      i have removed the AuthToken number from the script.
      _SendSMS("00000000","SomeOne","SMS body info") Func _SendSMS($SendTo,$SendFrom,$Msgtxt) $AccountSID = "ACbb765b3180d5938229eff8b8f63ed1bc" $AuthToken = "Auth Token number" $Data = '"https://api.twilio.com/2010-04-01/Accounts/'&$AccountSID&'/Messages.json"'& _ '-X POST \ --data-urlencode "To=+45'&$SendTo&'" \ --data-urlencode "From='&$SendFrom&'" \ --data-urlencode "Body='&$Msgtxt&'" \ -u '&$AccountSID&':'&$AuthToken&'' ShellExecute(@ScriptDir&"\curl.exe","-k "&$Data) ;~ curl 'https://api.twilio.com/2010-04-01/Accounts/ACbb765b3180d5938229eff8b8f63ed1bc/Messages.json' -X POST \ ;~ --data-urlencode 'To=+4500000000' \ ;~ --data-urlencode 'From=Reception' \ ;~ --data-urlencode 'Body=Test Body' \ ;~ -u ACbb765b3180d5938229eff8b8f63ed1bc:[AuthToken] EndFunc  
       
    • Ward
      By Ward
      Introduction
      JSON (Javascript Object Notation) is a popular data-interchange format and supported by a lot of script languages. On AutoIt, there is already a >JSON UDF written by Gabriel Boehme. It is good but too slow, and not supports unicode and control characters very well. So I write a new one (and of course, fast one as usual).

      I use a machine code version of JSON parser called "jsmn". jsmn not only supports standard JSON, but also accepts some non-strict JSON string. See below for example.
       
      Important Update!!
      I rename the library from jsmn.au3 to json.au3. All function names are changed, too.
       
      Decoding Function
      Json_Decode($Json) $Json can be a standard or non-standard JSON string. For example, it accepts:
      { server: example.com port: 80 message: "this looks like a config file" } The most JSON data type will be decoded into corresponding AutoIt variable, including 1D array, string, number, true, false, and null. JSON object will be decoded into "Windows Scripting Dictionary Object" retuned from ObjCreate("Scripting.Dictionary"). AutoIt build-in functions like IsArray, IsBool, etc. can be used to check the returned data type. But for Object and Null, Json_IsObject() and Json_IsNull() should be used.

      If the input JSON string is invalid, @Error will be set to $JSMN_ERROR_INVAL. And if the input JSON string is not finish (maybe read from stream?), @Error will be set to $JSMN_ERROR_PART.

      Encoding Function
      Json_Encode($Data, $Option = 0, $Indent = "\t", $ArraySep = ",\r\n", $ObjectSep = ",\r\n", $ColonSep = ": ") $Data can be a string, number, bool, keyword(default or null), 1D arrry, or "Scripting.Dictionary" COM object. Ptr will be converted to number, Binary will be converted to string in UTF8 encoding. Other unsupported types like 2D array, dllstruct or object will be encoded into null.

      $Option is bitmask consisting following constant:
      $JSON_UNESCAPED_ASCII ; Don't escape ascii charcters between chr(1) ~ chr(0x1f) $JSON_UNESCAPED_UNICODE ; Encode multibyte Unicode characters literally $JSON_UNESCAPED_SLASHES ; Don't escape / $JSON_HEX_TAG ; All < and > are converted to \u003C and \u003E $JSON_HEX_AMP ; All &amp;amp;amp;amp;s are converted to \u0026 $JSON_HEX_APOS ; All ' are converted to \u0027 $JSON_HEX_QUOT ; All " are converted to \u0022 $JSON_PRETTY_PRINT ; Use whitespace in returned data to format it $JSON_STRICT_PRINT ; Make sure returned JSON string is RFC4627 compliant $JSON_UNQUOTED_STRING ; Output unquoted string if possible (conflicting with $JSMN_STRICT_PRINT) Most encoding option have the same means like PHP's json_enocde() function. When $JSON_PRETTY_PRINT is set, output format can be change by other 4 parameters ($Indent, $ArraySep, $ObjectSep, and $ColonSep). Because these 4 output format parameters will be checked inside Jsmn_Encode() function, returned string will be always accepted by Jsmn_Decode(). $JSON_UNQUOTED_STRING can be used to output unquoted string that also accetped by Jsmn_Decode().

      $JSON_STRICT_PRINT is used to check output format setting and avoid non-standard JSON output. So this option is conflicting with $JSON_UNQUOTED_STRING.

      Get and Put Functions
      Json_Put(ByRef $Var, $Notation, $Data, $CheckExists = False) Json_Get(ByRef $Var, $Notation) These functions helps user to access object or array more easily. Both dot notation and square bracket notation can be supported. Json_Put() by default will create non-exists objects and arrays. For example:
      Local $Obj Json_Put($Obj, ".foo", "foo") Json_Put($Obj, ".bar[0]", "bar") Json_Put($Obj, ".test[1].foo.bar[2].foo.bar", "Test") Local $Test = Json_Get($Obj, '["test"][1]["foo"]["bar"][2]["foo"]["bar"]') ; "Test" Object Help Functions
      Json_ObjCreate() Json_ObjPut(ByRef $Object, $Key, $Value) Json_ObjGet(ByRef $Object, $Key) Json_ObjDelete(ByRef $Object, $Key) Json_ObjExists(ByRef $Object, $Key) Json_ObjGetCount(ByRef $Object) Json_ObjGetKeys(ByRef $Object) Json_ObjClear(ByRef $Object) These functions are just warps of "Scripting.Dictionary" COM object. You can use these functions if you are not already familiar with it.
       
      == Update 2013/05/19 ==
       
      * Add Jsmn_Encode() option "$JSMN_UNESCAPED_ASCII". Now the default output of Json_Encode() is exactly the same as PHP's json_encode() function (for example, chr(1) will be encoded into u0001).
      $JSON_UNESCAPED_ASCII ; Don't escape ascii charcters between chr(1) ~ chr(0x1f)  
      == Update 2015/01/08 ==
      * Rename the library from jsmn.au3 to json.au3. All function names are changed, too.
      * Add Json_Put() and Json_Get()
      * Add Null support
      * Using BinaryCall.au3 to loading the machine code.
       
      == Update 2018/01/13=   Jos
      * Add JsonDump() to list all Json Keys and their values to easily figure out what they are.

      JSMN.zip
      JSMN.zip
      Json.zip
      Json(2018.01.13).zip
    • jesus40
      By jesus40
      Hello friends, i have a working curl command that show informations about my account on binance.com, but_it dont work with autoit code without curl.exe.
      I want to do it without curl, because the whole process much Slower_ with StdoutRead (I want get the response in variable.)
      My Curl command in Autoit:
      This 2 are works, but_ i would like to do it without curl.exe
      $apikey="XYZ" sCommand = @ScriptDir & '\curl.exe -k -H "X-MBX-APIKEY: ' & $apikey & '" -X GET "https://api.binance.com/api/v3/account?' & $request the same in .bat  file
      curl.exe -k -H "X-MBX-APIKEY: XYZ" -X GET "https://api.binance.com/api/v3/account?timestamp=1514917812000&signature=85bdee77e53cd521e1d5229fbfb459d53799c42b3fa4596d73f1520fad5f965a" (I use curl with -k option which allows curl to make insecure connections, because there is problem with the sites certificate, (cURL error 60))
       
      I tried many variations, this is the latest... I cant get the same response.
      curl $error message (I changed ): {"code":-2015,"msg":"Invalid API-key, IP, or permissions for action."}
      autoit version $error message (Response code:400): Mandatory parameter 'timestamp' was not sent, was empty/null, or malformed.
       
      $request = $query & '&signature=' & $signature $oHTTP = ObjCreate("winhttp.winhttprequest.5.1") $oHTTP.Open("GET", "https://api.binance.com/api/v3/account", False) $oHTTP.SetRequestHeader("X-MBX-APIKEY", $apikey) $oHTTP.Send($request) $oReceived = $oHTTP.ResponseText $oStatusCode = $oHTTP.Status If $oStatusCode <> 200 then MsgBox(4096, "Response code", $oStatusCode) EndIf  
      thanks
    • jesus40
      By jesus40
      Hello friends, I need help getting data from json. I read json from url into a variable.
      Is possible to get volume_USD value etc.  where product_id= "ETH-BTC", ? So I want get "37421.69109185" as variable.
      I think is better keeping it in the memory as variable. Or easier to convert it to db or csv?
       
       
      #include <Inet.au3> #include <json.au3> $URL="https://api.abucoins.com/products/stats" $data = _INetGetSource($URL) MsgBox("","",$data) $object=json_decode($data) local $i=0 while 1 $message=json_get($object,'[product_id]');???????????????????????????????? MsgBox("","volume_USD",$message) $i=$i+1 WEnd  
      the json structure is here:
      https://api.abucoins.com/products/stats
      [ { "product_id": "ETH-BTC", "last": "0.05202015", "open": "0.05009375", "high": "0.05250000", "low": "0.04872420", "volume": "47.77440456", "volume_BTC": 2.48523169, "volume_USD": 37421.69109185, "volume_7d": "364.40240341", "volume_30d": "3555.83377072", "change": "3.85" }, { "product_id": "LTC-BTC", "last": "0.01737490", "open": "0.01744636", "high": "0.01779000", "low": "0.01658091", "volume": "67.62762830", "volume_BTC": 1.17502328, "volume_USD": 17941.95920676, "volume_7d": "611.57893068", "volume_30d": "3881.57766044", "change": "-0.41" }, { "product_id": "ETC-BTC", "last": "0.00191846", "open": "0.00189001", "high": "0.00198000", "low": "0.00162741", "volume": "66.48327742", "volume_BTC": 0.12754551, "volume_USD": 1947.54976323, "volume_7d": "738.94495089", "volume_30d": "4090.74712156", "change": "1.51" }, { "product_id": "ZEC-BTC", "last": "0.03466163", "open": "0.03365452", "high": "0.03466163", "low": "0.03295811", "volume": "33.40101560", "volume_BTC": 1.15773364, "volume_USD": 17677.95599574, "volume_7d": "191.15953471", "volume_30d": "887.70158297", "change": "2.99" } ]  
       
    • satanico64
      By satanico64
      hi guys !
      how are you ? fine ? yeahhh
      Here is my problem:
      I have 2 autoit applications, a.exe and b.exe
      In a.exe, i call b.exe with a json as parameter:
      FileWrite("N:\+++ Dev\ClientServeur\FolderMonitor.nca", "lejson in A:" & Json_Encode($json_tmp)& @CRLF) Run(@ScriptDir & "\FolderMonitor.exe " & Json_Encode($json_tmp) )                        
              In program B:
      ;Firstline of program: FileWrite("N:\+++ Dev\ClientServeur\FolderMonitor.nca", @CRLF & "json in B:" & $CmdLine[1] & @CRLF)        
              Output:
                     
              lejson in A:{"DOSSIERS":{"Dossier_Hidden":"N:\\+++ Dev\\ClientServeur\\","Dossier_du_script":"N:\\+++ Dev\\ClientServeur\\","Fichier_Historique":"N:\\+++ Dev\\ClientServeur\\Historique.log","Fichier_DEBUG":"N:\\+++ Dev\\ClientServeur\\FolderMonitor.nca"}}
              json in B  :{DOSSIERS:{Dossier_Hidden:N:\\+++ Dev\\ClientServeur\\,Dossier_du_script:N:\\+++ Dev\\ClientServeur\\,Fichier_Historique:N:\\+++ Dev\\ClientServeur\\Historique.log,Fichier_DEBUG:N:\\+++ Dev\\ClientServeur\\FolderMonitor.nca}}
      As you see, i lost my quote in my json so it's au problem to parse my json.
      I use THIS library
      I tried different type of encoding (ex JSON_STRICT_PRINT), but i don't think that it's the problem. Maybe i'm wrong
       
      thanks
      Nicolas.