Jump to content
kevin42036

Rerun section until last line is read and run report

Recommended Posts

kevin42036

Hi All,

I am new to AutoIt and programming in general so any help would be greatly appreciated! 

I am trying to create a script mainly using MouseClick and WinWait in order to automate some web processes. However, due to the lag time of the web pages and fields, sometimes my script does not run properly and I need to rerun it. I am trying to create a script that will check to see if the final line of the script was properly executed and if not, rerun the program and increase a count. Ultimately I would like some sort of report that tells me how many times it took to run to completion and total time. 

Does anyone have any suggestions as to which functions I can use to accomplish this? I am also open to any suggestions on a better process to ensure that my program runs to completion.

Thanks in advance!

Kevin

Share this post


Link to post
Share on other sites
JLogan3o13

@kevin42036 It is a little difficult to assist without seeing your script. If you post what you've written you'll go a long way to helping us help you.

 


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites
careca

In general, because i use firefox, for your case i have to recommend FF.au3 and mozrepl extension in firefox to enable comunication.

Then you can get all sorts of information about the page. if you base your report on the mouseclick and winwait, i guess the only way is to get any error from winwait, if it timeouts or something.

What have you done so far?


Spoiler

Paster - Main function is to paste text, but has more functions. (No longer mantained, switched to String Trigger)

Renamer - Rename files and folders, remove portions of text from the filename etc.

GPO Tool - Export/Import Group policy settings.

BeatsPlayer - Music player.

Params Tool - Right click an exe to see it's parameters or execute them.

String Trigger - Triggers pasting text or applications or internet links on specific strings.

Inconspicuous - Hide files in plain sight, not fully encrypted.

Regedit Control - Registry browsing history, quickly jump into any saved key.

Time4Shutdown - Write the time for shutdown in minutes.

Power Profiles Tool - Set a profile as active, delete, duplicate, export and import.

Firefox Profile Backup - Backup/restore previously saved profile.

Finished Task Shutdown - Shuts down pc when specified window/Wndl/process closes.

NetworkSpeedShutdown - Shuts down pc if download speed goes under "X" Kb/s.

IUIAutomation - Topic with framework and examples

Au3Record.exe

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • BogdanNicolescu
      By BogdanNicolescu
      While 1 / / / A whole bunch of codes found in help and here: https://www.autoitscript.com/autoit3/docs/ / / / WEnd OR:

       
      HotKeySet("{ESC}", "Terminate") While 1 MouseClick("Right",674,422) MouseClick("Left",673,447) Sleep(2000) / / / A whole bunch of codes found in help and here: https://www.autoitscript.com/autoit3/docs/ / / / MouseClick("Left",675,339) SLeep(3000) WEnd Func Terminate()     Exit 0 EndFunc  
      Sorry if i should't let this here to be found by newbies like me -.-'
    • MrCheese
      By MrCheese
      Hi guys,
       
      Wondering, is there a better way, likely to use 'for...next' to add a letter to each range, by moving right -> along a range of columns in excel.
      I currently use this, but its clunky.
      If $run = 1 Then $range = "B6:B41" If $run = 2 Then $range = "C6:C41" If $run = 3 Then $range = "D6:D41" If $run = 4 Then $range = "E6:E41" If $run = 5 Then $range = "F6:F41" If $run = 6 Then $range = "G6:G41" If $run = 7 Then $range = "H6:H41" If $run = 8 Then $range = "I6:I41" If $run = 9 Then $range = "J6:J41" If $run = 10 Then $range = "K6:K41" If $run = 11 Then $range = "L6:L41" If $run = 12 Then $range = "M6:M41" If $run = 13 Then $range = "N6:N41" If $run = 14 Then $range = "O6:O41" If $run = 15 Then $range = "P6:P41" If $run = 16 Then $range = "Q6:Q41" If $run = 17 Then $range = "R6:R41" If $run = 18 Then $range = "S6:S41" If $run = 19 Then $range = "T6:T41" If $run = 20 Then $range = "U6:U41" If $run = 21 Then $range = "V6:V41" If $run = 22 Then $range = "W6:W41" If $run = 23 Then $range = "X6:X41" If $run = 24 Then $range = "Y6:Y41" If $run = 25 Then $range = "Z6:Z41" If $run = 26 Then $range = "AA6:AA41" If $run = 27 Then $range = "AB6:AB41" If $run = 28 Then $range = "AC6:AC41" If $run = 29 Then $range = "AD6:AD41" If $run = 30 Then $range = "AE6:AE41" If $run = 31 Then $range = "AF6:AF41" If $run = 32 Then $range = "AG6:AG41" If $run = 33 Then $range = "AH6:AH41" If $run = 34 Then $range = "AI6:AI41" If $run = 35 Then $range = "AJ6:AJ41" If $run = 36 Then $range = "AK6:AK41" If $run = 37 Then $range = "AL6:AL41" If $run = 38 Then $range = "AM6:AM41" If $run = 39 Then $range = "AN6:AN41" If $run = 40 Then $range = "AO6:AO41" If $run = 41 Then $range = "AP6:AP41" If $run = 42 Then $range = "AQ6:AQ41" If $run = 43 Then $range = "AR6:AR41" If $run = 44 Then $range = "AS6:AS41" If $run = 45 Then $range = "AT6:AT41" If $run = 46 Then $range = "AU6:AU41" If $run = 47 Then $range = "AV6:AV41" If $run = 48 Then $range = "AW6:AW41" If $run = 49 Then $range = "AX6:AX41" If $run = 50 Then $range = "AY6:AY41"  
      Normally, if it was going down the rows, i'd use this:
       
      For $i = 0 To UBound($iRowCount) - 1 $row = $i + 1 $range = "B"&$row&":B"&$row+1 Next  
      so something like this, but i don't know how to code sequential columns:
      For $i = 0 To UBound($iColCount) - 1 $col = $i + 1 $range = $col&"1:"&$col&"40" Next  
      If I don't make sense, let me know.
      Any help would be great. thanks
    • KING_NK
      By KING_NK
      #RequireAdmin
      Global $x=0
      Global $y=0
      Func Start()
      While 1
      AutoItSetOption('MouseCoordMode',0)
      AutoItSetOption('SendKeyDelay',10)
      WinActivate('XXX')
      MouseClick('Primary',852,62,1,10)
      sleep(2200)
      MouseClick('Primary',880,196,1,10)
      Send('260',0)      -----------------------> $a as 260
      MouseClick('Primary',880,196,1,0)
      sleep(2200)
      MouseClick('Primary',1019,194,1,10)
      Sleep(2200)
      Send('98',0) ------------------------->$b as 98
      sleep(1000)
      Wend
      EndFunc
       
       
      I want to use Different number in every loop in the place of $a and  $b.
      Is it possble?If it possible Kindly help me
    • amphoric
      By amphoric
      Hi,
      I am struggling converting my 1D array to a 2D array and then showing that in my List View. Below is my current code, where I would like to take the array from the input box, and have that displayed as a list within the list view this is a list of computer names, and then update the 2nd column of each line once I have ran a ping and a registry change on each computer name, with either 'Completed' and 'Failed'
      I have checked out the AutoIt Arrays page here: https://www.autoitscript.com/wiki/Arrays , but unfortunately I cannot get my head around it. Any help would be greatly appreciated.
      I hope this makes sense.
      Thanks
       
      #include <Date.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <MsgBoxConstants.au3> #include <GUIListBox.au3> #include <GuiListView.au3> #Region ### $Form1 = GUICreate("Title", 515, 533, -1, -1) GUISetBkColor(0xFFFFFF) $Pic2 = GUICtrlCreatePic("Images\pic.jpg", 16, 16, 212, 28) $Label1 = GUICtrlCreateLabel("Label", 240, 16, 271, 33, $SS_CENTER) GUICtrlSetFont(-1, 17, 800, 0, "") $Combo1 = GUICtrlCreateCombo("", 256, 406, 241, 25, BitOR($GUI_SS_DEFAULT_COMBO,$CBS_SIMPLE)) $Label2 = GUICtrlCreateLabel("Please select the location", 45, 401, 210, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $ChangeButton = GUICtrlCreateButton("Change", 286, 487, 75, 25) $RePromptButton = GUICtrlCreateButton("Re-prompt User", 366, 487, 139, 25) $Checkbox1 = GUICtrlCreateCheckbox("I have ensured that my selection is correct.", 10, 487, 273, 25) GUICtrlSetFont(-1, 10, 400, 0, "") $ManLocation = GUICtrlCreateLabel("Please enter the location:", 59, 448, 189, 20, $SS_RIGHT) GUICtrlSetFont(-1, 10, 800, 0, "") GUICtrlSetState(-1, $GUI_HIDE) $ManLocInput = GUICtrlCreateInput("", 256, 445, 241, 24) GUICtrlSetState(-1, $GUI_HIDE) $Label5 = GUICtrlCreateLabel("for this device:", 138, 418, 109, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Label3 = GUICtrlCreateLabel("Asset Number:", 98, 72, 107, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Input1 = GUICtrlCreateInput("", 215, 69, 241, 24) $AddMulti = GUICtrlCreateLabel("Add Multiple Assets", 356, 55, 98, 13, $SS_RIGHT) GUICtrlSetFont(-1, 8, 400, 6, "") GUICtrlSetColor(-1, 0x808080) GUICtrlSetCursor (-1, 0) $List1 = GUICtrlCreateListView("", 16, 104, 481, 278) $Add = GUICtrlCreateButton("Add", 461, 68, 35, 25) GUISetState(@SW_SHOW) #EndRegion ### ;### StartForm ### $FormaMultiple = GUICreate("Title", 277, 418, -1, -1) GUISetBkColor(0xFFFFFF) $Label1 = GUICtrlCreateLabel("Please add 1 asset number per line.", 8, 11, 253, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $OK = GUICtrlCreateButton("OK", 56, 375, 75, 25) $Edit1 = GUICtrlCreateEdit("", 20, 40, 233, 329) $Cancel = GUICtrlCreateButton("Cancel", 136, 375, 75, 25) GUISetState(@SW_HIDE) ;### EndForm ### ;### Add List View Columns START ### ;### Add List View Columns END ### ;### Read Locations START ### ;Read the LOCAL ini file SECTIONS Global $aSections = IniReadSectionNames("Locations.ini") ;If the above succeeded, convert the array to a string with each item separated by a | (pipe) and set the default selected item to $aSections[1] If(Not @Error) Then GUICtrlSetData($Combo1, _ArraytoString($aSections, "|", 1), $aSections[1]) ;### Read Locations END ### ;### Require Admin START ### ;#RequireAdmin ;### Require Admin END ### While 1 $nMsg = GUIGetMsg() ;### Data Validation START ### ;Set Checkbox = ENABLE/DISABLE if not GUICtrlRead($Combo1) = "" AND GUICtrlRead($Combo1) = "Not In List" then if not GUICtrlRead($ManLocInput) = "" Then If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) Else If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) EndIf Else if GUICtrlRead($Combo1) = "" Then If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) Else If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) EndIf EndIf ;Set Button = ENABLE/DISABLE If GUICtrlRead($Checkbox1) = 1 Then If Not ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_ENABLE) Else If ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_DISABLE) EndIf ;### Data Validation END ### Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Add Case $AddMulti GUISetState(@SW_SHOW, $FormaMultiple) Case $Cancel GUISetState(@SW_HIDE, $FormaMultiple) Case $OK $sText = GUICtrlRead($Edit1) $aText = StringSplit($sText, @CRLF, 1) $bText = _ArrayToString($aText, ";", 1, -1) $cText = StringStripWS($bText, $STR_STRIPALL ) $dText = StringReplace($cText,";;",";") GUICtrlSetData($Input1, $dText) GUICtrlSetData($Edit1, "") GUISetState(@SW_HIDE, $FormaMultiple) For $i = 1 To $aText[0] Next Case $Combo1 ; If the combo is actioned Switch GUICtrlRead($Combo1) Case "Not In List" ; Show the manual input controls GUICtrlSetState($ManLocation, $GUI_SHOW) GUICtrlSetState($ManLocInput, $GUI_SHOW) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") Case Else ; Hide them GUICtrlSetState($ManLocation, $GUI_HIDE) GUICtrlSetState($ManLocInput, $GUI_HIDE) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") EndSwitch Case $ChangeButton ChangeReg() Case $RePromptButton RemoveReg() EndSwitch WEnd Func ChangeReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & " Changed to: " & GUICtrlRead($Combo1)) Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg Func RemoveReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & "CLEARED") Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg1  
    • 0Ethan0
      By 0Ethan0
      Ahoy Autoit Community!
      After many trials and errors I am unable to solve a problem I am facing and would appreciate any kind of input or better yet a solution 
      The Premise: An embeded slideshow viewer that runs after double-clicking an item in a ListView (each item will generate a different slideshow images).
      The Setup: GUI with a ListView Control and a simple exit button.
      The Issue: Once double clicked the slide plays however the GUI "locks"/non responsive until the slide is over. Same thing if I click on the "Test" button.
      The Culprit: I believe since it's in the images loop it can't accept any other commands until that loop is over.
      The Wish: I want to be able to use the GUI functions (selecting other items, clicking on button etc.) while the slideshow plays.
      The Code (stripped and simplified as much as I could):
      #include <GuiListView.au3> #include <File.au3> #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) HotKeySet("{Esc}", "_Exit") Global $c=0 Global $ssGDI[3], $ssGraphic[2], $ssImage Global Const $bg_color = "000000" Global Const $ssW = 480, $ssH = 320 Global $aFiles = _FileListToArrayRec("d:\testStage\", "*.jpg;*.png;*.bmp;*.gif;*.JPG;*.PNG;*.BMP;*.GIF", $FLTAR_FILES, $FLTAR_NORECUR ,$FLTAR_SORT ,$FLTAR_FULLPATH ) $guiW = 1200 $guiH = 726 $mainWindow = GUICreate("Slideshow Viewer", $guiW, $guiH, -1, -1, $WS_POPUP) $Button1 = GUICtrlCreateButton("Exit", 0, 0, 50, 50) GUICtrlSetOnEvent($Button1, "_Exit") $Button1 = GUICtrlCreateButton("Test", 60, 0, 50, 50) GUICtrlSetOnEvent($Button1, "Test") Global $ListView = GUICtrlCreateListView("Entry Name|Category", 5, 75, 195, 280) _GUICtrlListView_SetColumnWidth ($ListView, 0, 100) _GUICtrlListView_SetColumnWidth ($ListView, 1, 100) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_GRIDLINES, $LVS_EX_GRIDLINES) GUICtrlSendMsg($ListView, $LVM_SETEXTENDEDLISTVIEWSTYLE, $LVS_EX_FULLROWSELECT, $LVS_EX_FULLROWSELECT) GUICtrlCreateListViewItem("Name 1|Category 1", $ListView) GUICtrlCreateListViewItem("Name 2|Category 2", $ListView) screenshotWidgetInit($ssW,$ssH, 690, 100) GUISetState(@SW_SHOW, $mainWindow) GUIRegisterMsg($WM_NOTIFY, "WM_Notify_Events") While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE _Exit() EndSwitch WEnd Func Test() For $k = 1 To UBound($aFiles) - 1 screenshotWidgetTransition($aFiles[$k]) Next EndFunc Func ListView_Click() ConsoleWrite("Left Click") EndFunc Func ListView_DoubleClick() ConsoleWrite("Double Left Click") Test() EndFunc Func WM_Notify_Events($hWndGUI, $MsgID, $wParam, $lParam) #forceref $hWndGUI, $MsgID, $wParam Local $tagNMHDR, $event, $hwndFrom, $code $tagNMHDR = DllStructCreate("int;int;int", $lParam) If @error Then Return $event = DllStructGetData($tagNMHDR, 3) Select Case $wParam = $ListView Select Case $event = $NM_CLICK ListView_Click () Case $event = $NM_DBLCLK ListView_DoubleClick () EndSelect EndSelect Return $GUI_RUNDEFMSG EndFunc Func screenshotWidgetTransition($image, $delay = 0, $speed = 1, $sleep = 2000) Local $a, $d = $c, $iX, $iY $ssImage = _GDIPlus_ImageLoadFromFile($image) $iX = _GDIPlus_ImageGetWidth($ssImage) $iY = _GDIPlus_ImageGetHeight($ssImage) $FDesktop=$ssH/$ssW $Fact =1 If $iX > $ssW And $FDesktop > ($iY/$iX) Then $Fact=$ssW/$iX ElseIf $iY > $ssH Then $Fact=$ssH/$iY EndIf $H1 = Round(($Fact * $iY),0) $W1 = Round(($Fact * $iX),0) _GDIPlus_GraphicsDrawImageRect($ssGraphic[$d], $ssImage,($ssW - $W1)/2, ($ssH - $H1) / 2,$W1,$H1) WinSetTrans($ssGDI[$d], "", 0) WinSetOnTop($ssGDI[$d], "", 1) For $a = 0 To 254 Step $speed WinSetTrans($ssGDI[$d], "", $a) Sleep($delay) Next WinSetTrans($ssGDI[$d], "", 254) WinSetOnTop($ssGDI[Not ($d)], "", 0) WinSetTrans($ssGDI[Not ($d)], "", 0) _GDIPlus_GraphicsClear($ssGraphic[Not ($d)]) $c = 1 - $d _GDIPlus_ImageDispose ($ssImage) ; very important to realease the pics Sleep($sleep) EndFunc ;==>screenshotWidgetTransition Func screenshotWidgetInit($ssW,$ssH,$ssX,$ssY) $ssGDI[2] = GUICreate("", $ssW, $ssH, $ssX, $ssY, $WS_POPUP, $WS_EX_MDICHILD, $mainWindow) $ssGDI[0] = GUICreate("", $ssW, $ssH, 3, 3, $WS_POPUP, $WS_EX_MDICHILD, $ssGDI[2]) $ssGDI[1] = GUICreate("", $ssW, $ssH, 3, 3, $WS_POPUP, $WS_EX_MDICHILD, $ssGDI[2]) ; GUISetBkColor("0x" & $bg_color, $ssGDI[2]) GUISetState(@SW_SHOW, $ssGDI[2]) GUISetState(@SW_SHOW, $ssGDI[0]) GUISetState(@SW_SHOW, $ssGDI[1]) WinSetTrans($ssGDI[0], "", 0) WinSetTrans($ssGDI[1], "", 0) _GDIPlus_Startup() $ssGraphic[0] = _GDIPlus_GraphicsCreateFromHWND($ssGDI[0]) $ssGraphic[1] = _GDIPlus_GraphicsCreateFromHWND($ssGDI[1]) _GDIPlus_GraphicsClear($ssGraphic[0], "0xFF" & $bg_color) _GDIPlus_GraphicsClear($ssGraphic[1], "0xFF" & $bg_color) EndFunc ;==>screenshotWidgetInit Func _Exit() _GDIPlus_ImageDispose($ssImage) _GDIPlus_GraphicsDispose($ssGraphic[0]) _GDIPlus_GraphicsDispose($ssGraphic[1]) GUIDelete($ssGDI[0]) GUIDelete($ssGDI[1]) GUIDelete($ssGDI[2]) _GDIPlus_Shutdown() Exit EndFunc ;==>_Exit I hope someone can shed light on this; perhaps a different approach is needed?
      Thank you in advance!
      P.S.
      The script is patched from different scripts of different users in the forum - thank you again users!
×