Jump to content
UEZ

AutoIt Windows Screenshooter v1.84 Build 2019-08-18

Recommended Posts

Here a small tool I wrote to make screenshots from non minimized windows and selectable regions on desktop!

Thank you.

BTW. I can't get screenshot by this from ProgDVB window and use in this case.


The point of world view

Share this post


Link to post
Share on other sites

I don't have a ProgDVB card to test it yet only an USB DVB-T card! I will test it for DVB-T and when it is not working I will have a look to your code!

Thanks for the hint!

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

I don't have a ProgDVB card

ProgDVB is "Universelle und leistungsfähige Software für digitales Fernsehen und zum Hören von Radioprogrammen."

See here - progDVB

ProgDVB works with DVB-S,DVB-S2,DVB-T & DVB-C

This pic was created by my script now from France 24.

post-9395-0-80129100-1291808623_thumb.jp


The point of world view

Share this post


Link to post
Share on other sites

I update the code a little bit.

Although the interest is rather low have a look to post#1 if you like.

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Made some updates.

Maybe your are interested maybe not - you decide!

Last update for now!

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Thanks again UEZ! I'm still studying your GDI+ scripts :x. I have made a game for my son (with numbers on the buttons) and now I'm trying to somehow split a given image into small ones (a matrix) and then randomly put them on the buttons (like a shuffled puzzle). DON'T TELL ME THE SOLUTION! When I'll give up, I'll shout.

M.I.

Share this post


Link to post
Share on other sites

Another update. Read change log and additional information on 1st post if you like for more information.

Have a look to the About intro part - maybe you will like it :x

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Here an update with some small improvement.

I'm not happy with the method to make screenshots of maximized windows because of the black frame!

Maybe somebody knows a better way to do it...

Br,

UEZ

PS: for the Intro part press on the left upper icon from the window and select About... :)


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Here an update with some small improvements.

I'm not happy with the method to make screenshots of maximized windows because of the black frame and not taking screenshots properly from GDI+ windows!

DllCall("User32.dll", "int", "PrintWindow", "hwnd", $hWnd, "handle", $hMemDC, "int", 0) ist not the best choice...

Maybe somebody knows a better way to do it...

Br,

UEZ

PS: for the Intro part press on the left upper icon from the window and select About... :)

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

This is the last update for this code, unless I or you find some bugs, etc.

Read the change log (history) on 1st post for more details.

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Actually I didn't want to post an update but I detected a memory leak. If you display any screenshot the memory of the bitmap wasn't freed up. :)

It should be fixed now.

Further I added a zoom preview window when you want to grab the screen more precisely.

Br,

UEZ


Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

I like this, Great work, only thing I see causing a problem is that, (for me at least) it freezes and crashes, if you do not use the exit button.

AMD Athlon II

32 bit Win 7

Thanks for your feedback! :)

Hmm, odd. I cannot reproduce the freezes and/or crashes. Does it crash/freeze after or before fade out when you close the program?

Exit button and X button calling the same exit function. ;)

Someone else with same problem?

Br,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

When using the window close x it imediately freezes the screen for a while (between 5 and 30 seconds I've observed) then fades out and I get the windows notice that its stopped working, and should I debug, look online for solution, or close the program.


AutoIt Absolute Beginners    Require a serial    Pause Script    Video Tutorials by Morthawt   ipify 

Monkey's are, like, natures humans.

Share this post


Link to post
Share on other sites

This is the exit function from line 1489:

Func _Exit()
;g1
    DllCall("user32.dll", "int", "UnhookWindowsHookEx", "hwnd", $hM_Hook[0])
    $hM_Hook[0] = 0
    DllCallbackFree($hKey_Proc)
    $hKey_Proc = 0
;g2
    GUISetOnEvent($GUI_EVENT_PRIMARYDOWN, "")
    DllClose($dll)
;g3
    _WinAPI_DeleteObject ($hBitmap_s)
    _WinAPI_DeleteDC($hMemDC)
    _WinAPI_DeleteObject($memBitmap)
    _WinAPI_ReleaseDC(0, $hDC_Region)
    _WinAPI_DeleteDC($hDC_Region)
;g4
    _GDIPlus_GraphicsDispose($hImageContext)
    _GDIPlus_BitmapDispose($hBackImage)
    _GDIPlus_BitmapDispose($vBitmap)
    _GDIPlus_BitmapDispose($undo)
    _GDIPlus_MatrixDispose($hMatrix)
    _GDIPlus_BrushDispose($hBrush_Clear)
    _GDIPlus_BitmapDispose($hBmp)
    _GDIPlus_GraphicsDispose($hContext)
    _GDIPlus_BitmapDispose($hBuffer_Bmp)
    _GDIPlus_GraphicsDispose($hGraphic)
    _GDIPlus_Shutdown()
;g5
    _WinAPI_AnimateWindow($hGUI, BitOR($AW_BLEND,  $AW_HIDE), 750)
;g6
    GUIDelete($hGUI)
    Exit
EndFunc   ;==>_Exit

Can you uncomment g1 and g3 block and try again?

Btw, I update the code again.

Thanks,

UEZ

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By UEZ
      This project has been discontinued!
       
      Here a small tool I wrote to update my Sysinternal tools collection without the need to download always the whole package or visiting the site to check for updates. I know that there are several tools available (also some tools written in AutoIt) but here another one for the collection. It was good exercise for me to code it.
       
       
        
       
       
      Some files from cannot be downloaded although they are visible on the web site!
       
      Here the download link of the source code only: AutoIt Sysinternal Tools Synchronizer v0.99.5 build 2020-07-04 beta.7z  (1509 downloads previously)
      -=> Requires AutoIt version 3.3.13.20 or higher / tested on Win8.1 real machine and some VMs: Win7 / Vista / Win10
       
      Compiled exe only: @MediaFire
       
      Just select the Sysinternal Tools folder or create one and press the synchronize button to download the selected items. Click on AutoIt label (near to left upper corner) to open menu.
       
      Special thanks to LarsJ, Melba23 and mesale0077 for their help. 
       
      I've still some ideas to implement which are more gimmick related, so it is not finished yet...
      If you want to add your language please check out #Region Language. Thanks. 
       
      Please report any bug or if you have any suggestions.
       
      The language of the tool tip from each of the executable in the left list view were automatically created using Google translator and weren't checked for correctness.
       
      Br,
      UEZ
    • By Bilgus
      This is an update or derivative work of Beege 's Scrolling Line Graph UDF
      https://www.autoitscript.com/forum/topic/109599-scrolling-line-graph-udf
       
      I noticed a few issues for my use case with the UDF one being that adding a sample required updating the waveform
      High CPU usage went hand in hand with that requirement
      Another issue was just how long updating took to complete
      I've hopefully rectified that with this version
       
      There are a few changes (only 1 line per graph for instance)
      The addition of a function AddSample (uses graphics paths to speed up drawing samples on update) Gridlines are only generated once A sample finished line can be added UpdateGraph allows you to compress the discarded portion of the graph (it looks kinda cool but uses more CPU) Lower Cpu usage Uses real Control Ids - it is a label control underneath so you get click events and can display text when control is disabled Example (Waveform.au3)
       
      Example 2 (peak.au3)
      UDF
      Updated:
      Previous Downloads [38 / 38/ 0]
      SSLG.au3 waveform.au3 Peak.au3
    • By FengHuangWuShen
      So I was playing with INet and downloading files and made a simple video downloader, or it can even be used for any file really.
      Just follow the reference section in INet_Settings.ini , and then run the script.
       
      Main Script <snip>
      INet_Settings.ini  URL - The target URL of the video you're trying to grab Data - This is the starting string, and ending string reference to look for the download URL itself. Settings - Only setting here currently, is the delay in which to wait for the file to download ### Reference for Start and End points for various websites <snip>
      Credits to : https://www.autoitscript.com/forum/profile/31965-progandy/  for the URL Encode and Decode.
    • By UEZ
      I was inspired by a CSS example to create a procedural graphic without any shader or ray tracing technique.
      Here the result using GDI+ only:

       
      Blue Orb.au3
      ;Inspired from https://codepen.io/bradleytaunt/details/VwvzKyb ;Coded by UEZ build 2020-05-07 #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> If @OSBuild < 7600 Then Exit MsgBox(BitOR($MB_TOPMOST, $MB_ICONERROR), "ERROR", "This demo requires GDIPlus v1.1", 10) _GDIPlus_Startup() Global Const $iW = 1200, $iH = 700, $iSize_globe = 450 Global Const $hGUI = GUICreate("GDI+ Procedural Gfx / Blue Orb v1.20 by UEZ", $iW, $iH, -1, -1, $WS_POPUP, $WS_EX_TOPMOST) Global Const $hCanvas = _GDIPlus_GraphicsCreateFromHWND($hGUI) Global Const $hImage = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Global Const $hGfx = _GDIPlus_ImageGetGraphicsContext($hImage) _GDIPlus_GraphicsSetSmoothingMode($hGfx, $GDIP_SMOOTHINGMODE_ANTIALIAS8X8) ;~ _GDIPlus_GraphicsSetCompositingQuality($hGfx, $GDIP_COMPOSITINGQUALITYHIGHQUALITY) _GDIPlus_GraphicsSetInterpolationMode($hGfx, $GDIP_INTERPOLATIONMODE_HIGHQUALITYBICUBIC) _GDIPlus_GraphicsSetPixelOffsetMode($hGfx, $GDIP_PIXELOFFSETMODE_HALF) ;draw background Global Const $hBrush_bg = _GDIPlus_LineBrushCreate($iW / 2, 0, $iW / 2, $iH / 2, 0xFF1E88E5, 0xFF1565C0, 2) _GDIPlus_LineBrushSetSigmaBlend ($hBrush_bg, 0.95, 1) ;create blurry edge _GDIPlus_GraphicsFillRect($hGfx, 0, 0, $iW, $iH, $hBrush_bg) ;draw blurred text Global Const $hImage_text = _GDIPlus_BitmapCreateFromScan0($iW, $iH / 2) Global Const $hGfx_text = _GDIPlus_ImageGetGraphicsContext($hImage_text) Global Const $hPath_text = _GDIPlus_PathCreate() Global Const $hFamily = _GDIPlus_FontFamilyCreate("Impact") Global Const $hStringFormat = _GDIPlus_StringFormatCreate() Global Const $hBrush_txt = _GDIPlus_LineBrushCreate($iW / 2, 0, $iW / 2, $iH / 2, 0xE0FFFFFF, 0xA01A237E) ;_GDIPlus_BrushCreateSolid(0xF02E86FB) _GDIPlus_LineBrushSetSigmaBlend($hBrush_txt, 0.66, 1) Global Const $hPen_txt = _GDIPlus_PenCreate(0x801A237E, 1) _GDIPlus_StringFormatSetAlign($hStringFormat, 1) _GDIPlus_StringFormatSetLineAlign($hStringFormat, 1) _GDIPlus_GraphicsSetSmoothingMode($hGfx_text, $GDIP_SMOOTHINGMODE_ANTIALIAS8X8) _GDIPlus_GraphicsSetTextRenderingHint($hGfx_text, $GDIP_TextRenderingHintAntialias) _GDIPlus_GraphicsSetPixelOffsetMode($hGfx_text, $GDIP_PIXELOFFSETMODE_HALF) _GDIPlus_GraphicsSetCompositingQuality($hGfx_text, $GDIP_COMPOSITINGQUALITYHIGHQUALITY) Global $tLayout = _GDIPlus_RectFCreate() $tLayout.width = $iW $tLayout.height = $iH / 2 $tLayout.y = -$iH * 0.05 _GDIPlus_PathAddString($hPath_text, "AutoIt rulez!", $tLayout, $hFamily, 0, $iW / 8, $hStringFormat) _GDIPlus_GraphicsFillPath($hGfx_text, $hPath_text, $hBrush_txt) _GDIPlus_GraphicsDrawPath($hGfx_text, $hPath_text, $hPen_txt) Global Const $hEffect_blur_text = _GDIPlus_EffectCreateBlur(20) _GDIPlus_BitmapApplyEffect($hImage_text, $hEffect_blur_text) _GDIPlus_GraphicsDrawImageRect($hGfx, $hImage_text, 0, 0, $iW, $iH / 2) ;draw shadow of the text Global Const $hBrush_txt_shadow = _GDIPlus_BrushCreateSolid(0x40000000) _GDIPlus_GraphicsClear($hGfx_text, 0) _GDIPlus_PathReset($hPath_text) $tLayout.width = $iW $tLayout.height = $iH / 2 $tLayout.y = 0 _GDIPlus_PathAddString($hPath_text, "AutoIt rulez!", $tLayout, $hFamily, 0, $iW / 8, $hStringFormat) _GDIPlus_GraphicsFillPath($hGfx_text, $hPath_text, $hBrush_txt_shadow) Global Const $hEffect_blur_text_shadow = _GDIPlus_EffectCreateBlur(60) _GDIPlus_BitmapApplyEffect($hImage_text, $hEffect_blur_text_shadow) _GDIPlus_GraphicsDrawImageRect($hGfx, $hImage_text, 0, $iH * 0.55, $iW, $iH / 8) ;draw shadow Global Const $iW_shadow1 = $iSize_globe * 0.85, $iH_shadow1 = $iSize_globe * 0.1, $iW_shadow2 = $iSize_globe * 0.60, _ $iW_shadow_Img = $iW_shadow1 * 2, $iH_shadowImg = $iH_shadow1 * 4 Global Const $hImage_shadow = _GDIPlus_BitmapCreateFromScan0($iW_shadow_Img, $iH_shadowImg) Global Const $hGfx_shadow = _GDIPlus_ImageGetGraphicsContext($hImage_shadow) _GDIPlus_GraphicsSetSmoothingMode($hGfx_shadow, $GDIP_SMOOTHINGMODE_ANTIALIAS8X8) Global Const $hBrush_shadow = _GDIPlus_BrushCreateSolid(0x66000000) _GDIPlus_GraphicsFillEllipse($hGfx_shadow, ($iW_shadow_Img - $iW_shadow1) / 2, ($iH_shadowImg / 4 + $iH_shadow1), $iW_shadow1, $iH_shadow1, $hBrush_shadow) _GDIPlus_BrushSetSolidColor($hBrush_shadow, 0xB3000000) _GDIPlus_GraphicsFillEllipse($hGfx_shadow, ($iW_shadow_Img - $iW_shadow2) / 2, ($iH_shadowImg / 4 + $iH_shadow1), $iW_shadow2, $iH_shadow1, $hBrush_shadow) Global Const $hEffect_blur_shadow = _GDIPlus_EffectCreateBlur(32) _GDIPlus_BitmapApplyEffect($hImage_shadow, $hEffect_blur_shadow) _GDIPlus_GraphicsDrawImageRect($hGfx, $hImage_shadow, ($iW - $iW_shadow_Img) / 2, $iH / 2 + $iH_shadow1 * 2.20, $iW_shadow_Img, $iH_shadowImg) ;draw globe Global Const $hPath_globe = _GDIPlus_PathCreate() _GDIPlus_PathAddEllipse($hPath_globe, ($iW - $iSize_globe) / 2, ($iH - $iSize_globe) / 2, $iSize_globe, $iSize_globe) Global Const $hLBrush_globe1 = _GDIPlus_LineBrushCreate($iW / 2, ($iH - $iSize_globe) / 2, $iW / 2, ($iH + $iSize_globe) / 2, 0, 0, 1) Global $aInterpolations[5][2] $aInterpolations[0][0] = 4 $aInterpolations[1][0] = 0xFFFFFFFF $aInterpolations[1][1] = 0 $aInterpolations[2][0] = 0xFFEEEEEE $aInterpolations[2][1] = 0.10 $aInterpolations[3][0] = 0xFF2E86FB $aInterpolations[3][1] = 0.50 $aInterpolations[4][0] = 0xFF1A237E $aInterpolations[4][1] = 1.0 _GDIPlus_LineBrushSetPresetBlend($hLBrush_globe1, $aInterpolations) _GDIPlus_GraphicsFillPath($hGfx, $hPath_globe, $hLBrush_globe1) Global Const $iSize_globe2 = $iSize_globe * 0.85, $iSize_globe2_Img = $iSize_globe2 * 1.5 Global Const $hImage_globe2 = _GDIPlus_BitmapCreateFromScan0($iSize_globe2_Img, $iSize_globe2_Img) Global Const $hGfx_globe2 = _GDIPlus_ImageGetGraphicsContext($hImage_globe2) Global Const $hBrush_globe2 = _GDIPlus_BrushCreateSolid(0x7F000000) ;draw shadow and blur it Global Const $px = ($iSize_globe2_Img - $iSize_globe2) / 2, $py = ($iSize_globe2_Img - $iSize_globe2) / 2 _GDIPlus_GraphicsFillEllipse($hGfx_globe2, $px, $py + ($iSize_globe - $iSize_globe2) * 0.25, $iSize_globe2, $iSize_globe2, $hBrush_globe2) Global Const $hEffect_blur_shadow2 = _GDIPlus_EffectCreateBlur(15) _GDIPlus_BitmapApplyEffect($hImage_globe2, $hEffect_blur_shadow2) ;draw 2nd smaller globe and blur it, too Global Const $hLBrush_globe2 = _GDIPlus_LineBrushCreate($iW / 2, $py, $iW / 2, $py + $iSize_globe2, 0, 0) Dim $aInterpolations[4][2] $aInterpolations[0][0] = 3 $aInterpolations[1][0] = 0xFFFFFFFF $aInterpolations[1][1] = 0 $aInterpolations[2][0] = 0xFF2E86FB $aInterpolations[2][1] = 0.60 $aInterpolations[3][0] = 0xFF283593 $aInterpolations[3][1] = 1.0 _GDIPlus_LineBrushSetPresetBlend($hLBrush_globe2, $aInterpolations) _GDIPlus_GraphicsFillEllipse($hGfx_globe2, $px, $py, $iSize_globe2, $iSize_globe2, $hLBrush_globe2) Global Const $hImage_globe2_blur = _Blur($hImage_globe2, $iSize_globe, $iSize_globe) ;windows gdi+ blur doesn't work properly _GDIPlus_GraphicsDrawImageRect($hGfx, $hImage_globe2_blur, ($iW - $iSize_globe2_Img) / 2 - ($iSize_globe - $iSize_globe2) / 8, ($iH - $iSize_globe2_Img) / 2, $iSize_globe2_Img, $iSize_globe2_Img) GUISetState() _GDIPlus_GraphicsDrawImageRect($hCanvas, $hImage, 0, 0, $iW, $iH) ;~ _GDIPlus_ImageSaveToFile($hImage, @ScriptDir & "\Blue Orb v1.20.png") ;clean-up ressources _GDIPlus_FontFamilyDispose($hFamily) _GDIPlus_StringFormatDispose($hStringFormat) _GDIPlus_EffectDispose($hEffect_blur_text) _GDIPlus_EffectDispose($hEffect_blur_text_shadow) _GDIPlus_EffectDispose($hEffect_blur_shadow) _GDIPlus_EffectDispose($hEffect_blur_shadow2) _GDIPlus_PathDispose($hPath_text) _GDIPlus_PathDispose($hPath_globe) _GDIPlus_PenDispose($hPen_txt) _GDIPlus_BrushDispose($hBrush_txt) _GDIPlus_BrushDispose($hBrush_txt_shadow) _GDIPlus_BrushDispose($hBrush_bg) _GDIPlus_BrushDispose($hLBrush_globe1) _GDIPlus_BrushDispose($hLBrush_globe2) _GDIPlus_BrushDispose($hBrush_globe2) _GDIPlus_ImageDispose($hImage) _GDIPlus_ImageDispose($hImage_text) _GDIPlus_ImageDispose($hImage_shadow) _GDIPlus_ImageDispose($hImage_globe2) _GDIPlus_ImageDispose($hImage_globe2_blur) _GDIPlus_GraphicsDispose($hCanvas) _GDIPlus_GraphicsDispose($hGfx_text) _GDIPlus_GraphicsDispose($hGfx_shadow) _GDIPlus_GraphicsDispose($hGfx_globe2) _GDIPlus_Shutdown() Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete($hGUI) Exit Func _Blur($hBitmap, $iW, $iH, $fScale = 0.0525, $dx1 = 0, $dy1 = 0, $dx2 = 0, $dy2 = 0, $qual = 6) ; by eukalyptus Local $hBmpSmall = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Local $hGfxSmall = _GDIPlus_ImageGetGraphicsContext($hBmpSmall) _GDIPlus_GraphicsSetPixelOffsetMode($hGfxSmall, $GDIP_PIXELOFFSETMODE_HALF) Local $hBmpBig = _GDIPlus_BitmapCreateFromScan0($iW, $iH) Local $hGfxBig = _GDIPlus_ImageGetGraphicsContext($hBmpBig) _GDIPlus_GraphicsSetPixelOffsetMode($hGfxBig, $GDIP_PIXELOFFSETMODE_HALF) _GDIPlus_GraphicsScaleTransform($hGfxSmall, $fScale, $fScale) _GDIPlus_GraphicsSetInterpolationMode($hGfxSmall, $qual) _GDIPlus_GraphicsScaleTransform($hGfxBig, 1 / $fScale, 1 / $fScale) _GDIPlus_GraphicsSetInterpolationMode($hGfxBig, $qual) _GDIPlus_GraphicsDrawImageRect($hGfxSmall, $hBitmap, 0, $dx1, $iW, $iH + $dy1) _GDIPlus_GraphicsDrawImageRect($hGfxBig, $hBmpSmall, 0, $dx2, $iW, $iH + $dy2) _GDIPlus_BitmapDispose($hBmpSmall) _GDIPlus_GraphicsDispose($hGfxSmall) _GDIPlus_GraphicsDispose($hGfxBig) Return $hBmpBig EndFunc ;==>_Blur  
      I hope you like it.
       
      Feel free to post your examples here, too. 
    • By UEZ
      Here a little script to load a TGA image file and create a GDI+ bitmap. Currently supported TGA formats are  1/8/15/16/24 and 32-bit.
      As v0.85 is written completely in AutoIt, it might take some time to convert larger 8/15/16/24/32-bit images. ☕
       
      _GDIPlus_TGAImageLoadFromFile.au3 UDF
      v0.85 without assembler acceleration code but with RLE support:
      ;Coded by UEZ #AutoIt3Wrapper_UseX64=n #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <WinAPIFiles.au3> ; #FUNCTION# ==================================================================================================================== ; Name ..........: _GDIPlus_TGAImageLoadFromFile ; Description ...: Loads a TGA compressed (RLE) / uncompressed image file (1/8/15/16/24/32-bit) and converts it to a GDI+ bitmap format. ; Syntax ........: _GDIPlus_TGAImageLoadFromFile($sFile[, $bPrintInfo = False.]) ; Parameters ....: $sFile - TGA file name to load from disk. ; $bPrintInfo - [optional] Prints some information about the TGA image to console. Default is False. ; Return values .: Success: GDI+ bitmap handle ; Failure: error 1 - file cannot be opened ; error 2 - TGA image is not in one of these formats: 1/8/15/16/24/32-bit ; error 3 - unsupported TGA image type ; error 4 - unable to read file to struct ; error 5 - unknown TGA pixel depth ; error 6 - return bitmap cannot be created ; Version .......: v0.85 build 2019-11-08 beta ; Author ........: UEZ ; Remarks .......: 8/15/16/24/32-bit images might be slow on converting ^^ ; Related .......: _GDIPlus_BitmapCreateFromScan0, _GDIPlus_ImageRotateFlip, DllStructCreate, _WinAPI_CreateFile, _WinAPI_SetFilePointer ; Link ..........: https://www.loc.gov/preservation/digital/formats/fdd/fdd000180.shtml, http://www.fileformat.info/format/tga/egff.htm ; Example .......: Yes ; =============================================================================================================================== Func _GDIPlus_TGAImageLoadFromFile($sFile, $bPrintInfo = False) Local Const $hFile = _WinAPI_CreateFile($sFile, 2, 2) If Not $hFile Then Return SetError(1, 0, 0) Local Const $tagTGAHeader = "align 1;byte idLength;byte colormapType;byte imageType;word firstEntryIndex;word colormapLength;byte colormapEntrySize;word xOrigin;word yOrigin;word width;word height;byte pixelDepth;byte imageDescriptor" Local Const $tagTGAFooter = "dword extAreaOffset;dword devDirOffset;byte imageID[18]" Local Const $tagTGAExtention = "align 1;word extSize;byte authorName[41];byte authorComments[324];word timeM;word timeD;word timeY;word timeHr;word timeMin;word timeSec;byte jobName[41];word jobTimeHr;word jobTimeMin;word jobTimeSec;byte swID[41];word swVersionNr;byte swVersionLetter;long keyColor;word pxAspectRatioNum;word pxAspectRatioDom;word gammaNum;word gammaDom;dword colCorrOffset;dword postStampOffset;dword scanLineOffset;byte attribType" Local Const $tTGAHeader = DllStructCreate($tagTGAHeader) Local $tTGAFooter = DllStructCreate($tagTGAFooter) Local Const $tTGAExtention = DllStructCreate($tagTGAExtention) Local $dwBytesRead, $tTGAImageID, $tagTGAImageID, $iColorValuesStartPos = 0 _WinAPI_ReadFile($hFile, $tTGAHeader, DllStructGetSize($tTGAHeader), $dwBytesRead) $iColorValuesStartPos += $dwBytesRead If $tTGAHeader.idLength > 0 Then $tagTGAImageID = "byte imageID[" & $tTGAHeader.idLength & "]" $tTGAImageID = DllStructCreate($tagTGAImageID) _WinAPI_ReadFile($hFile, $tTGAImageID, $tTGAHeader.idLength, $dwBytesRead) $iColorValuesStartPos += $dwBytesRead EndIf Local Const $iPxDepth = $tTGAHeader.pixelDepth If Not BitOR($iPxDepth = 32, $iPxDepth = 24, $iPxDepth = 16, $iPxDepth = 15, $iPxDepth = 8, $iPxDepth = 1) Then _WinAPI_CloseHandle($hFile) Return SetError(2, 0, 0) EndIf #cs ImageType Image Data Type Colormap Encoding 0 No image data included in file No No 1 Colormapped image data Yes No 2 Truecolor image data No No 3 Monochrome image data No No 9 Colormapped image data Yes Yes 10 Truecolor image data No Yes 11 Monochrome image data No Yes #ce If Not BitOR($tTGAHeader.imageType = 0x01, $tTGAHeader.imageType = 0x02, $tTGAHeader.imageType = 0x03, $tTGAHeader.imageType = 0x09, $tTGAHeader.imageType = 0x0A, $tTGAHeader.imageType = 0x0B) Then _WinAPI_CloseHandle($hFile) Return SetError(3, 0, 0) EndIf Local $iW = $tTGAHeader.width, $iH = $tTGAHeader.height, $colorwidth = $tTGAHeader.colormapEntrySize / 8, _ $colorTblSize = $tTGAHeader.colormapLength * $colorwidth Local $dwBufferSize = FileGetSize($sFile) Local $tSrcBmp = DllStructCreate("ubyte color[" & $dwBufferSize & "]") _WinAPI_ReadFile($hFile, $tSrcBmp, $dwBufferSize, $dwBytesRead) _WinAPI_SetFilePointer($hFile, -26, $FILE_END) _WinAPI_ReadFile($hFile, $tTGAFooter, 26, $dwBytesRead) Local $sFooter = StringTrimRight(BinaryToString($tTGAFooter.imageID), 1), $iOffset = 0, $iOffset2, $iOffset3 If Not StringCompare($sFooter, "TRUEVISION-XFILE.") Then ;read extension information to struct if available $iOffset = $tTGAFooter.extAreaOffset _WinAPI_SetFilePointer($hFile, $iOffset, $FILE_BEGIN) _WinAPI_ReadFile($hFile, $tTGAExtention, 0x01EF, $dwBytesRead) Else $tTGAFooter.extAreaOffset = 0 EndIf _WinAPI_CloseHandle($hFile) If $dwBytesRead = 0 Then Return SetError(4, _WinAPI_GetLastError(), 0) Local $bRLE = BitOR($tTGAHeader.imageType = 0x09, $tTGAHeader.imageType = 0x0A, $tTGAHeader.imageType = 0x0B) If $bPrintInfo Then ConsoleWrite("idLength: " & $tTGAHeader.idLength & @CRLF) ConsoleWrite("colormapType: " & $tTGAHeader.colormapType & @CRLF) ConsoleWrite("imageType: " & $tTGAHeader.imageType & @CRLF) ConsoleWrite("firstEntryIndex: " & $tTGAHeader.firstEntryIndex & @CRLF) ConsoleWrite("colormapLength: " & $tTGAHeader.colormapLength & @CRLF) ConsoleWrite("colormapEntrySize: " & $tTGAHeader.colormapEntrySize & @CRLF) ConsoleWrite("xOrigin: " & $tTGAHeader.xOrigin & @CRLF) ConsoleWrite("yOrigin: " & $tTGAHeader.yOrigin & @CRLF) ConsoleWrite("width: " & $tTGAHeader.width & @CRLF) ConsoleWrite("height: " & $tTGAHeader.height & @CRLF) ConsoleWrite("pixelDepth: " & $iPxDepth & @CRLF) ConsoleWrite("imageDescriptor: " & $tTGAHeader.imageDescriptor & @CRLF) If $tTGAHeader.idLength > 0 Then ConsoleWrite("ImageID: " & RemoveNullChars($tTGAImageID.imageID) & @CRLF) If $iOffset Then ConsoleWrite("authorName: " & RemoveNullChars($tTGAExtention.authorName) & @CRLF) ConsoleWrite("authorComments: " & RemoveNullChars($tTGAExtention.authorComments) & @CRLF) ConsoleWrite("jobName: " & RemoveNullChars($tTGAExtention.jobName) & @CRLF) ConsoleWrite("swID: " & RemoveNullChars($tTGAExtention.swID) & @CRLF) EndIf ConsoleWrite("RLE packed: " & $bRLE & @CRLF) EndIf Local Static $tDestBmp ;must be static otherwise bitmap data might get corrupted or in worst case script will crash Local $stride, $iPixelFormat Switch $iPxDepth Case 1 ;1-bit $iPixelFormat = $GDIP_PXF01INDEXED $stride = BitAND(($iW * 1) + 1, BitNOT(1)) $tDestBmp = DllStructCreate("uint color[" & $stride * $iH & "];") Case 8, 24 $iPixelFormat = $GDIP_PXF24RGB $stride = BitAND(($iW * 3) + 3, BitNOT(3)) $tDestBmp = DllStructCreate("ubyte color[" & $stride * $iH & "];") Case 15, 16 $iPixelFormat = $GDIP_PXF16RGB555 $stride = BitAND(($iW * 2) + 2, BitNOT(2)) $tDestBmp = DllStructCreate("ubyte color[" & $stride * $iH & "];") Case 32 $iPixelFormat = $GDIP_PXF32ARGB $stride = $iW * 4 $tDestBmp = DllStructCreate("ubyte color[" & $stride * $iH & "];") Case Else Return SetError(5, 0, 0) EndSwitch If Mod($stride, 4) <> 0 Then $stride += 4 - Mod($stride, 4) Local Const $hBitmap = _GDIPlus_BitmapCreateFromScan0($iW, $iH, $iPixelFormat, $stride, $tDestBmp) If @error Or Not $hBitmap Then Return SetError(6, @error, 0) Local $c, $q, $x, $y, $t1, $t2, $t3, $t4, $col, $red, $green, $blue, $alpha, $iLen, $iStart, $iEnd, $iLength, $iWW Local Const $hDLL = DllOpen("msvcrt.dll") Switch $iPxDepth Case 1 ;1-bit For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + BitShift($t1, 3), "uint", $stride) Next Case 8 ;8-bit ;if a color table is available, just use it If $tTGAHeader.colormapType = 1 Then Local $tMapColorTbl = DllStructCreate("ubyte bgr[" & $colorTblSize & "]", DllStructGetPtr($tSrcBmp, "color") + $tTGAHeader.firstEntryIndex) Switch $bRLE Case 0 For $y = 0 To ($iH - 1) $iOffset = $y * $iW + $colorTblSize $iOffset2 = $y * $stride For $x = 0 To ($iW - 1) $t1 = $iOffset2 + $x * 3 $t2 = $tSrcBmp.color($iOffset + $x + 1) * $colorwidth Switch $colorwidth Case 3, 4 $tDestBmp.color($t1 + 1) = $tMapColorTbl.bgr($t2 + 1) $tDestBmp.color($t1 + 2) = $tMapColorTbl.bgr($t2 + 2) $tDestBmp.color($t1 + 3) = $tMapColorTbl.bgr($t2 + 3) Case 2 ;convert from RGB555 to RGB $col = BitOR(BitShift($tMapColorTbl.bgr($t2 + 2), -8), $tMapColorTbl.bgr($t2 + 1)) ;RGB555 $tDestBmp.color($t1 + 1) = BitShift(BitAND($col, 0x001F), -3) ;B $tDestBmp.color($t1 + 2) = BitShift(BitShift(BitAND($col, 0x03E0), 5), -3) ;G $tDestBmp.color($t1 + 3) = BitShift(BitShift(BitAND($col, 0x7C00), 10), -3) ;R EndSwitch Next Next Case Else ;RLE encoded TGA images $c = 0 $x = 0 $y = 0 $iOffset = $colorTblSize + 1 $iStart = Int($iColorValuesStartPos + $colorTblSize) $iEnd = $tTGAFooter.extAreaOffset > 0 ? $tTGAFooter.extAreaOffset : $dwBufferSize $iLength = $iEnd - $iStart - 1 $iWW = $iW - 1 $t3 = $colorwidth = 2 ? 2 : 3 While $c <= $iLength $iOffset2 = Int($tSrcBmp.color($iOffset + $c)) $iLen = BitAND($iOffset2, 0x7F) + 1 If BitAND($iOffset2, 0x80) Then ; check for packet format ;run length packet format $c += 1 $iOffset3 = Int($tSrcBmp.color($iOffset + $c)) * $t3 $t2 = $y * $stride For $q = 1 To $iLen $t1 = $t2 + $x * 3 Switch $colorwidth Case 3, 4 $tDestBmp.color($t1 + 1) = $tMapColorTbl.bgr($iOffset3 + 1) $tDestBmp.color($t1 + 2) = $tMapColorTbl.bgr($iOffset3 + 2) $tDestBmp.color($t1 + 3) = $tMapColorTbl.bgr($iOffset3 + 3) Case 2 ;convert from RGB555 to RGB $col = BitOR(BitShift($tMapColorTbl.bgr($iOffset3 + 2), -8), $tMapColorTbl.bgr($iOffset3 + 1)) ;RGB555 $tDestBmp.color($t1 + 1) = BitShift(BitAND($col, 0x001F), -3) ;B $tDestBmp.color($t1 + 2) = BitShift(BitShift(BitAND($col, 0x03E0), 5), -3) ;G $tDestBmp.color($t1 + 3) = BitShift(BitShift(BitAND($col, 0x7C00), 10), -3) ;R EndSwitch $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf Next $c += 1 Else ;raw packet format $c += 1 $t2 = $y * $stride For $q = 1 To $iLen $iOffset3 = Int($tSrcBmp.color($iOffset + $c)) * $t3 $t1 = $t2 + $x * 3 Switch $colorwidth Case 3, 4 $tDestBmp.color($t1 + 1) = $tMapColorTbl.bgr($iOffset3 + 1) $tDestBmp.color($t1 + 2) = $tMapColorTbl.bgr($iOffset3 + 2) $tDestBmp.color($t1 + 3) = $tMapColorTbl.bgr($iOffset3 + 3) Case 2 ;convert from RGB555 to RGB $col = BitOR(BitShift($tMapColorTbl.bgr($iOffset3 + 2), -8), $tMapColorTbl.bgr($iOffset3 + 1)) ;RGB555 $tDestBmp.color($t1 + 1) = BitShift(BitAND($col, 0x001F), -3) ;B $tDestBmp.color($t1 + 2) = BitShift(BitShift(BitAND($col, 0x03E0), 5), -3) ;G $tDestBmp.color($t1 + 3) = BitShift(BitShift(BitAND($col, 0x7C00), 10), -3) ;R EndSwitch $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf $c += 1 Next EndIf WEnd EndSwitch Else ;convert it to grayscale Switch $bRLE Case 0 For $y = 0 To $iH - 1 $iOffset = $y * $iW + $colorTblSize $iOffset2 = $y * $stride For $x = 0 To $iW - 1 $t1 = $iOffset + $x - 2 $t2 = $iOffset2 + $x * 3 $blue = $tSrcBmp.color($t1 + 1) $green = $tSrcBmp.color($t1 + 2) $red = $tSrcBmp.color($t1 + 3) $col = $red $col = $col < 0 ? 0 : $col > 255 ? 255 : $col $tDestBmp.color($t2 + 1) = $col $tDestBmp.color($t2 + 2) = $col $tDestBmp.color($t2 + 3) = $col Next Next Case Else $c = 0 $x = 0 $y = 0 $iOffset = $colorTblSize + 1 $iStart = Int($iColorValuesStartPos + $colorTblSize) $iEnd = $tTGAFooter.extAreaOffset > 0 ? $tTGAFooter.extAreaOffset : $dwBufferSize $iLength = $iEnd - $iStart - 1 $iWW = $iW - 1 While $c <= $iLength $iOffset2 = Int($tSrcBmp.color($iOffset + $c)) $iLen = BitAND($iOffset2, 0x7F) + 1 If BitAND($iOffset2, 0x80) Then ; check for packet format ;run length packet format $c += 1 $iOffset3 = Int($tSrcBmp.color($iOffset + $c)) * 3 $blue = $iOffset3 $green = $iOffset3 + 1 $red = $iOffset3 + 2 $col = ($red + $green + $blue) / 9 $col = $col < 0 ? 0 : $col > 255 ? 255 : $col $t2 = $y * $stride For $q = 1 To $iLen $t1 = $t2 + $x * 3 $tDestBmp.color($t1 + 1) = $col $tDestBmp.color($t1 + 2) = $col $tDestBmp.color($t1 + 3) = $col $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf Next $c += 1 Else ;raw packet format $c += 1 $t2 = $y * $stride For $q = 1 To $iLen $iOffset3 = Int($tSrcBmp.color($iOffset + $c)) * 3 $blue = $iOffset3 $green = $iOffset3 + 1 $red = $iOffset3 + 2 $col = ($red + $green + $blue) / 9 $col = $col < 0 ? 0 : $col > 255 ? 255 : $col $t1 = $t2 + $x * 3 $tDestBmp.color($t1 + 1) = $col $tDestBmp.color($t1 + 2) = $col $tDestBmp.color($t1 + 3) = $col $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf $c += 1 Next EndIf WEnd EndSwitch EndIf Case 15, 16, 24, 32 ;15/16/24/32-bit, as the bitmap format is the same we can use memcpy to copy the pixel data directly to the memory. ;Exeptions are 15/16/24-bit images whose width is not a divider of 4! If BitOR($iPxDepth = 15, $iPxDepth = 16, $iPxDepth = 24) Then If BitOR(Mod($iW, 4), $bRLE) Then Switch $iPxDepth Case 15, 16 Switch $bRLE Case 0 $t4 = $iW * 2 For $y = 0 To ($iH - 1) $iOffset = $y * $t4 $iOffset2 = $y * $stride For $x = 0 To ($iW - 1) $t3 = $x * 2 $t1 = $iOffset + $t3 $t2 = $iOffset2 + $t3 ;RGB555 $tDestBmp.color($t2 + 1) = $tSrcBmp.color($t1 + $colorTblSize + 1) $tDestBmp.color($t2 + 2) = $tSrcBmp.color($t1 + $colorTblSize + 2) Next Next Case Else $c = 0 $x = 0 $y = 0 $iStart = Int($iColorValuesStartPos + $colorTblSize) $iEnd = $tTGAFooter.extAreaOffset > 0 ? $tTGAFooter.extAreaOffset : $dwBufferSize $iLength = $iEnd - $iStart - 1 $iWW = $iW - 1 While $c <= $iLength $iOffset2 = Int($tSrcBmp.color($colorTblSize + $c + 1)) $iLen = BitAND($iOffset2, 0x7F) + 1 If BitAND($iOffset2, 0x80) Then ; check for packet format ;run length packet format $c += 1 $t3 = $y * $stride For $q = 1 To $iLen $t1 = $t3 + $x * 2 $t2 = $colorTblSize + $c $tDestBmp.color($t1 + 1) = $tSrcBmp.color($t2 + 1) $tDestBmp.color($t1 + 2) = $tSrcBmp.color($t2 + 2) $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t3 = $y * $stride EndIf Next $c += 2 Else ;raw packet format $c += 1 $t3 = $y * $stride For $q = 1 To $iLen $t1 = $t3 + $x * 2 $t2 = $colorTblSize + $c $tDestBmp.color($t1 + 1) = $tSrcBmp.color($t2 + 1) $tDestBmp.color($t1 + 2) = $tSrcBmp.color($t2 + 2) $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t3 = $y * $stride EndIf $c += 2 Next EndIf WEnd EndSwitch Case 24 Switch $bRLE Case 0 $t4 = $iW * 3 For $y = 0 To $iH - 1 $iOffset = $y * $t4 $iOffset2 = $y * $stride For $x = 0 To ($iW - 1) $t3 = $x * 3 $t1 = $iOffset + $t3 $blue = $tSrcBmp.color($t1 + 1) $green = $tSrcBmp.color($t1 + 2) $red = $tSrcBmp.color($t1 + 3) $t2 = $iOffset2 + $t3 $tDestBmp.color($t2 + 1) = $blue $tDestBmp.color($t2 + 2) = $green $tDestBmp.color($t2 + 3) = $red Next Next Case Else $c = 0 $x = 0 $y = 0 $iStart = Int($iColorValuesStartPos + $colorTblSize) $iEnd = $tTGAFooter.extAreaOffset > 0 ? $tTGAFooter.extAreaOffset : $dwBufferSize $iLength = $iEnd - $iStart - 1 $iWW = $iW - 1 While $c <= $iLength $iOffset2 = Int($tSrcBmp.color($c + 1)) $iLen = BitAND($iOffset2, 0x7F) + 1 If BitAND($iOffset2, 0x80) Then ; check for packet format ;run length packet format $c += 1 $blue = $tSrcBmp.color($c + 1) $green = $tSrcBmp.color($c + 2) $red = $tSrcBmp.color($c + 3) $t2 = $y * $stride For $q = 1 To $iLen $t1 = $t2 + $x * 3 $tDestBmp.color($t1 + 1) = $blue $tDestBmp.color($t1 + 2) = $green $tDestBmp.color($t1 + 3) = $red $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf Next $c += 3 Else ;raw packet format $c += 1 $t2 = $y * $stride For $q = 1 To $iLen $blue = $tSrcBmp.color($c + 1) $green = $tSrcBmp.color($c + 2) $red = $tSrcBmp.color($c + 3) $t1 = $t2 + $x * 3 $tDestBmp.color($t1 + 1) = $blue $tDestBmp.color($t1 + 2) = $green $tDestBmp.color($t1 + 3) = $red $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf $c += 3 Next EndIf WEnd EndSwitch EndSwitch Else For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + $t1, "uint", $stride) Next EndIf Else Switch $bRLE Case 0 For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + $t1, "uint", $stride) Next Case Else $c = 0 $x = 0 $y = 0 $iStart = Int($iColorValuesStartPos + $colorTblSize) $iEnd = $tTGAFooter.extAreaOffset > 0 ? $tTGAFooter.extAreaOffset : $dwBufferSize $iLength = $iEnd - $iStart - 1 $iWW = $iW - 1 While $c <= $iLength $iOffset2 = Int($tSrcBmp.color($c + 1)) $iLen = BitAND($iOffset2, 0x7F) + 1 If BitAND($iOffset2, 0x80) Then ; check for packet format ;run length packet format $c += 1 $blue = $tSrcBmp.color($c + 1) $green = $tSrcBmp.color($c + 2) $red = $tSrcBmp.color($c + 3) $alpha = $tSrcBmp.color($c + 4) $t2 = $y * $stride For $q = 1 To $iLen $t1 = $t2 + $x * 4 $tDestBmp.color($t1 + 1) = $blue $tDestBmp.color($t1 + 2) = $green $tDestBmp.color($t1 + 3) = $red $tDestBmp.color($t1 + 4) = $alpha $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf Next $c += 4 Else ;raw packet format $c += 1 $t2 = $y * $stride For $q = 1 To $iLen $blue = $tSrcBmp.color($c + 1) $green = $tSrcBmp.color($c + 2) $red = $tSrcBmp.color($c + 3) $alpha = $tSrcBmp.color($c + 4) $t1 = $t2 + $x * 4 $tDestBmp.color($t1 + 1) = $blue $tDestBmp.color($t1 + 2) = $green $tDestBmp.color($t1 + 3) = $red $tDestBmp.color($t1 + 4) = $alpha $x += 1 If $x > $iWW Then $x = 0 $y += 1 $t2 = $y * $stride EndIf $c += 4 Next EndIf WEnd EndSwitch EndIf EndSwitch DllClose($hDLL) ;TGA image is stored bottom up in file. Need to flip it. If BitAND($tTGAHeader.imageDescriptor, 0x30) <> 0x20 Then _GDIPlus_ImageRotateFlip($hBitmap, $GDIP_Rotate180FlipX) $tSrcBmp = 0 Return $hBitmap EndFunc ;==>_GDIPlus_TGAImageLoadFromFile ; #INTERNAL_USE_ONLY# =========================================================================================================== ; Name ..........: RemoveNullChars ; Description ...: Converts a null terminated binary string to a string ; Author ........: UEZ ; =============================================================================================================================== Func RemoveNullChars($bin) Local $a = StringRegExp($bin, "[[:xdigit:]+]{2}", 3), $s, $i If @error Then Return $s For $i = 0 To UBound($a) - 1 If $a[$i] = "00" Then ExitLoop $s &= Chr(Dec($a[$i])) Next Return $s EndFunc ;==>RemoveNullChars ;------------- Example ------------- Global $sFile = FileOpenDialog("Select a TGA file", "", "TGA image(*.tga)") If @error Then Exit _GDIPlus_Startup() Global $endtime, $timer = TimerInit() Global $hImage = _GDIPlus_TGAImageLoadFromFile($sFile, True) If @error Then ConsoleWrite(@error & " / " & @extended & @CRLF) _GDIPlus_Shutdown() Exit EndIf $endtime = TimerDiff($timer) ;~ _GDIPlus_ImageSaveToFile($hImage, @ScriptDir & "\Converted.png") ;~ ShellExecute(@ScriptDir & "\Converted.png") Global $iW = _GDIPlus_ImageGetWidth($hImage), $iH = _GDIPlus_ImageGetHeight($hImage) Global $hGui = GUICreate("TGA Image Loader by UEZ", $iW, $iH) GUISetState() Global $hGraphics = _GDIPlus_GraphicsCreateFromHWND($hGui) _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $iW, $iH) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE _GDIPlus_BitmapDispose($hImage) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() Exit Case $GUI_EVENT_RESTORE _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $iW, $iH) EndSwitch WEnd  
      v0.80 with assembler acceleration (thanks to AndyG for Assembleit2) but without RLE support yet:
      ;Coded by UEZ #AutoIt3Wrapper_Compile_Both=y #AutoIt3Wrapper_UseX64=n #include <GDIPlus.au3> #include <GUIConstantsEx.au3> #include <Memory.au3> #include <WinAPIFiles.au3> ; #FUNCTION# ==================================================================================================================== ; Name ..........: _GDIPlus_TGAImageLoadFromFile ; Description ...: Loads an uncompressed TGA image file (1/8/15/16/24/32-bit) and converts it to a GDI+ bitmap format. ; Syntax ........: _GDIPlus_TGAImageLoadFromFile($sFile[, $bPrintInfo = False.]) ; Parameters ....: $sFile - TGA file name to load from disk. ; $bPrintInfo - [optional] Prints some information about the TGA image to console. Default is False. ; Return values .: Success: GDI+ bitmap handle ; Failure: error 1 - file cannot be opened ; error 2 - TGA image is not in one of these formats: 1/8/15/16/24/32-bit ; error 3 - unsupported TGA image type ; error 4 - unable to read file to struct ; error 5 - unknown TGA pixel depth ; error 6 - return bitmap cannot be created ; Version .......: v0.80 build 2019-10-23 beta ; Author ........: UEZ - thanks to AndyG for Assembleit2 ; Remarks .......: No RLE compressed TGA image support yet! ; Related .......: _GDIPlus_BitmapCreateFromScan0, _GDIPlus_ImageRotateFlip, DllStructCreate, _WinAPI_CreateFile, _WinAPI_SetFilePointer ; Link ..........: https://www.loc.gov/preservation/digital/formats/fdd/fdd000180.shtml, http://www.fileformat.info/format/tga/egff.htm ; Example .......: Yes ; =============================================================================================================================== Func _GDIPlus_TGAImageLoadFromFile($sFile, $bPrintInfo = False) Local Const $hFile = _WinAPI_CreateFile($sFile, 2, 2) If Not $hFile Then Return SetError(1, 0, 0) Local Const $tagTGAHeader = "align 1;byte idLength;byte colormapType;byte imageType;word firstEntryIndex;word colormapLength;byte colormapEntrySize;word xOrigin;word yOrigin;word width;word height;byte pixelDepth;byte imageDescriptor" Local Const $tagTGAFooter = "dword extAreaOffset;dword devDirOffset;byte imageID[18]" Local Const $tagTGAExtention = "align 1;word extSize;byte authorName[41];byte authorComments[324];word timeM;word timeD;word timeY;word timeHr;word timeMin;word timeSec;byte jobName[41];word jobTimeHr;word jobTimeMin;word jobTimeSec;byte swID[41];word swVersionNr;byte swVersionLetter;long keyColor;word pxAspectRatioNum;word pxAspectRatioDom;word gammaNum;word gammaDom;dword colCorrOffset;dword postStampOffset;dword scanLineOffset;byte attribType" Local Const $tTGAHeader = DllStructCreate($tagTGAHeader) Local Const $tTGAFooter = DllStructCreate($tagTGAFooter) Local Const $tTGAExtention = DllStructCreate($tagTGAExtention) Local $dwBytesRead, $tTGAImageID, $tagTGAImageID _WinAPI_ReadFile($hFile, $tTGAHeader, DllStructGetSize($tTGAHeader), $dwBytesRead) If $tTGAHeader.idLength > 0 Then $tagTGAImageID = "byte imageID[" & $tTGAHeader.idLength & "]" $tTGAImageID = DllStructCreate($tagTGAImageID) _WinAPI_ReadFile($hFile, $tTGAImageID, $tTGAHeader.idLength, $dwBytesRead) EndIf Local Const $iPxDepth = $tTGAHeader.pixelDepth If Not BitOR($iPxDepth = 32, $iPxDepth = 24, $iPxDepth = 16, $iPxDepth = 15, $iPxDepth = 8, $iPxDepth = 1) Then _WinAPI_CloseHandle($hFile) Return SetError(2, 0, 0) EndIf #cs ImageType Image Data Type Colormap Encoding 0 No image data included in file No No 1 Colormapped image data Yes No 2 Truecolor image data No No 3 Monochrome image data No No 9 Colormapped image data Yes Yes 10 Truecolor image data No Yes 11 Monochrome image data No Yes #ce If Not BitOR($tTGAHeader.imageType = 0x01, $tTGAHeader.imageType = 0x02, $tTGAHeader.imageType = 0x03) Then _WinAPI_CloseHandle($hFile) Return SetError(3, 0, 0) EndIf Local $iW = $tTGAHeader.width, $iH = $tTGAHeader.height, $bytesPerPixel = $iPxDepth / 8, $colorwidth = $tTGAHeader.colormapEntrySize / 8, _ $colorTblSize = $tTGAHeader.colormapLength * $colorwidth If $tTGAHeader.colormapEntrySize < 24 Then $bytesPerPixel = 4 Local Const $dwBufferSize = FileGetSize($sFile) Local $tSrcBmp = DllStructCreate("ubyte color[" & $dwBufferSize + $colorTblSize & "]") _WinAPI_ReadFile($hFile, $tSrcBmp, $dwBufferSize + $colorTblSize, $dwBytesRead) _WinAPI_SetFilePointer($hFile, -26, $FILE_END) _WinAPI_ReadFile($hFile, $tTGAFooter, 26, $dwBytesRead) Local $sFooter = StringTrimRight(BinaryToString($tTGAFooter.imageID), 1), $iOffset = 0, $iOffset2 If Not StringCompare($sFooter, "TRUEVISION-XFILE.") Then ;read extension information to struct if available $iOffset = $tTGAFooter.extAreaOffset _WinAPI_SetFilePointer($hFile, $iOffset, $FILE_BEGIN) _WinAPI_ReadFile($hFile, $tTGAExtention, 0x01EF, $dwBytesRead) EndIf _WinAPI_CloseHandle($hFile) If $dwBytesRead = 0 Then Return SetError(4, _WinAPI_GetLastError(), 0) If $bPrintInfo Then ConsoleWrite("idLength: " & $tTGAHeader.idLength & @CRLF) ConsoleWrite("colormapType: " & $tTGAHeader.colormapType & @CRLF) ConsoleWrite("imageType: " & $tTGAHeader.imageType & @CRLF) ConsoleWrite("firstEntryIndex: " & $tTGAHeader.firstEntryIndex & @CRLF) ConsoleWrite("colormapLength: " & $tTGAHeader.colormapLength & @CRLF) ConsoleWrite("colormapEntrySize: " & $tTGAHeader.colormapEntrySize & @CRLF) ConsoleWrite("xOrigin: " & $tTGAHeader.xOrigin & @CRLF) ConsoleWrite("yOrigin: " & $tTGAHeader.yOrigin & @CRLF) ConsoleWrite("width: " & $tTGAHeader.width & @CRLF) ConsoleWrite("height: " & $tTGAHeader.height & @CRLF) ConsoleWrite("pixelDepth: " & $iPxDepth & @CRLF) ConsoleWrite("imageDescriptor: " & $tTGAHeader.imageDescriptor & @CRLF) If $tTGAHeader.idLength > 0 Then ConsoleWrite("ImageID: " & RemoveNullChars($tTGAImageID.imageID) & @CRLF) If $iOffset Then ConsoleWrite("authorName: " & RemoveNullChars($tTGAExtention.authorName) & @CRLF) ConsoleWrite("authorComments: " & RemoveNullChars($tTGAExtention.authorComments) & @CRLF) ConsoleWrite("jobName: " & RemoveNullChars($tTGAExtention.jobName) & @CRLF) ConsoleWrite("swID: " & RemoveNullChars($tTGAExtention.swID) & @CRLF) EndIf EndIf Local Static $tDestBmp ;must be static otherwise bitmap data might get corrupted or in worst case script will crash Local $stride, $iPixelFormat Switch $iPxDepth Case 1 ;1-bit $iPixelFormat = $GDIP_PXF01INDEXED $stride = BitAND(($iW * 1) + 1, BitNOT(1)) $tDestBmp = DllStructCreate("uint color[" & $stride * $iH + 1 & "];") Case 8, 24 $iPixelFormat = $GDIP_PXF24RGB $stride = BitAND(($iW * 3) + 3, BitNOT(3)) $tDestBmp = DllStructCreate("uint color[" & $stride * $iH + 1 & "];") Case 15, 16 $iPixelFormat = $GDIP_PXF16RGB555 $stride = BitAND(($iW * 2) + 2, BitNOT(2)) $tDestBmp = DllStructCreate("uint color[" & $stride * $iH + 1 & "];") Case 32 $iPixelFormat = $GDIP_PXF32ARGB $stride = $iW * 4 $tDestBmp = DllStructCreate("uint color[" & $stride * $iH + 1 & "];") Case Else Return SetError(5, 0, 0) EndSwitch If Mod($stride, 4) <> 0 Then $stride += 4 - Mod($stride, 4) Local Const $hBitmap = _GDIPlus_BitmapCreateFromScan0($iW, $iH, $iPixelFormat, $stride, $tDestBmp) If @error Or Not $hBitmap Then Return SetError(6, @error, 0) Local $fTimer = TimerInit() Local $x, $x1, $y, $t1 Local Const $hDLL = DllOpen("msvcrt.dll") Local Const $tagParam = "ptr tSrcBmp;ptr tDestBmp;dword strideSrc;dword strideDest;dword w;dword h;dword colorTblSize;dword t1;dword t2" Local $tParam If @AutoItX64 Then $tParam = _DLLStructCreate64($tagParam) Else $tParam = DLLStructCreate($tagParam) EndIf $tParam.tSrcBmp = DllStructGetPtr($tSrcBmp) $tParam.tDestBmp = DllStructGetPtr($tDestBmp) $tParam.strideDest = $stride $tParam.w = ($iW - 1) $tParam.h = ($iH - 1) $tParam.colorTblSize = $colorTblSize Switch $iPxDepth Case 1 ;1-bit For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + BitShift($t1, 3), "uint", $stride) Next Case 8 ;8-bit ConsoleWrite("Using Assembler code to speed-up..." & @CRLF) ;if a color table is available, just use it If $tTGAHeader.colormapType = 1 Then Local $tMapColorTbl = DllStructCreate("ubyte bgr[" & $colorTblSize & "]", DllStructGetPtr($tSrcBmp, "color") + $tTGAHeader.firstEntryIndex) Local $tParam2, $tagParam2 = "align 1;ptr tSrcBmp;ptr tDestBmp;ptr colormap;dword strideSrc;dword strideDest;dword w;dword h;dword colorTblSize;dword colorwidth;dword t1;dword t2;byte r5;byte g5;byte b5;" If @AutoItX64 Then $tParam2 = _DLLStructCreate64($tagParam2) Else $tParam2 = DllStructCreate($tagParam2) EndIf $tParam2.tSrcBmp = DllStructGetPtr($tSrcBmp) $tParam2.tDestBmp = DllStructGetPtr($tDestBmp) $tParam2.colormap = DllStructGetPtr($tMapColorTbl) $tParam2.strideSrc = $iW $tParam2.strideDest = $stride $tParam2.colorwidth = $colorwidth $tParam2.w = ($iW - 1) $tParam2.h = ($iH - 1) $tParam2.colorTblSize = $colorTblSize Switch @AutoItX64 Case False Local Const $bBinASM8cm_x86 = Binary("0x608B7C242431C990909090909090909089C8F7670C03471C89472489C8F7671089472831DB8B472401D8030789C231C08A02F767208B570801C28B32B803000000F7E303472803470489C5837F200275476689F26683E21F66C1E20388572E6689F26681E2E00366C1EA0566C1E20388572D6689F26681E2007C66C1EA0A66C1E20388572C31C00A472CC1E0080A472DC1E0080A472E89C6897500433B5F147684413B4F180F8665FFFFFF61C20400") Local $tBinASM8cm_x86 = DllStructCreate("ubyte asm[" & BinaryLen($bBinASM8cm_x86) & "]") $tBinASM8cm_x86.asm = $bBinASM8cm_x86 DllCallAddress("none", DllStructGetPtr($tBinASM8cm_x86), "ptr", DllStructGetPtr($tParam2)) Case Else Local Const $bBinASM8cm_x64 = Binary("0x575653554989CF41BE000000009090904489F041F7671841034728418947304489F041F7671C418947344531ED418B47304401E84903074889C24831C08A0241F7672C498B57104801C2448B0A4831C048C7C00300000041F7E541034734490347084989C041837F2C02755A4831D2664489CA6683E21F66C1E2034188573A4831D2664489CA6681E2E00366C1EA0566C1E203418857394831D2664489CA6681E2007C66C1EA0A66C1E2034188573831C0410A4738C1E008410A4739C1E008410A473A4189C145890841FFC5453B6F200F8657FFFFFF41FFC6453B77240F862DFFFFFF5D5B5E5FC20800") Local $tBinASM8cm_x64 = _DLLStructCreate64("ubyte asm[" & BinaryLen($bBinASM8cm_x64) & "]") $tBinASM8cm_x64.asm = $bBinASM8cm_x64 DllCallAddress("none", DllStructGetPtr($tBinASM8cm_x64), "ptr", DllStructGetPtr($tParam2)) EndSwitch Else ;convert it 1:1 directly Switch @AutoItX64 Case False $tParam.strideSrc = $iW $tParam.colorTblSize -= 2 Local Const $bBinASM8_x86 = Binary("0x8B7C2404BB00000000B900000000909089C8F7670889471C89C8F7670C8947208B471C01D8034718030789C252B803000000F7E30347200347045A8B328930433B5F1076DB31DB413B4F1476C3C20400") Local $tBinASM8_x86 = DllStructCreate("ubyte asm[" & BinaryLen($bBinASM8_x86) & "]") $tBinASM8_x86.asm = $bBinASM8_x86 DllCallAddress("none", DllStructGetPtr($tBinASM8_x86), "ptr", DllStructGetPtr($tParam)) Case Else $tParam.strideSrc = $iW Local Const $bBinASM8_x64 = Binary("0x575653554989CF49836F2002BB00000000B9000000009090909090909090909089C841F767104989C289C841F767144989C34D89D04901D84D0347204D030748C7C00300000048F7E34C01D8490347084D8B08448908FFC3413B5F1876D44831DBFFC1413B4F1C76B75D5B5E5FC20800") Local $tBinASM8_x64 = _DLLStructCreate64("ubyte asm[" & BinaryLen($bBinASM8_x64) & "]") $tBinASM8_x64.asm = $bBinASM8_x64 DllCallAddress("none", DllStructGetPtr($tBinASM8_x64), "ptr", DllStructGetPtr($tParam)) EndSwitch EndIf Case 15, 16, 24, 32 ;15/16/24/32-bit, as the bitmap format is the same we can use memcpy to copy the pixel data directly to the memory. ;Exeptions are 15/16/24-bit images whose width is not a divider of 4! If BitOR($iPxDepth = 15, $iPxDepth = 16, $iPxDepth = 24) And Mod($iW, 4) Then ConsoleWrite("Using Assembler code to speed-up..." & @CRLF) Switch $iPxDepth Case 15, 16 $tParam.strideSrc = $iW * 2 Switch @AutoItX64 Case False Local Const $bBinASM1516_x86 = Binary("0x8B7C2404BB00000000B900000000909089C8F7670889471C89C8F7670C894720B802000000F7E35003471C034718030789C2580347200347048B32668930433B5F1076DC31DB413B4F1476C4C20400") Local $tBinASM1516_x86 = DllStructCreate("ubyte asm[" & BinaryLen($bBinASM1516_x86) & "]") $tBinASM1516_x86.asm = $bBinASM1516_x86 DllCallAddress("none", DllStructGetPtr($tBinASM1516_x86), "ptr", DllStructGetPtr($tParam)) Case Else Local Const $bBinASM1516_x64 = Binary("0x575653554989CFBB00000000B90000000090909090909090909090909090909089C841F767104989C189C841F767144989C25389D8D1E04C89D24801C2490357084D89C84901C04D0347204D0307498B00488902FFC3FFC3413B5F1876D55BFFC1413B4F1C76B95D5B5E5FC20800") Local $tBinASM1516_x64 = _DLLStructCreate64("ubyte asm[" & BinaryLen($bBinASM1516_x64) & "]") $tBinASM1516_x64.asm = $bBinASM1516_x64 DllCallAddress("none", DllStructGetPtr($tBinASM1516_x64), "ptr", DllStructGetPtr($tParam)) EndSwitch Case 24 $tParam.strideSrc = $iW * 3 Switch @AutoItX64 Case False Local Const $bBinASM24_x86 = Binary("0x8B7C2404BB00000000B900000000909089C8F7670889471C89C8F7670C894720B803000000F7E35003471C034718030789C2580347200347048B328930433B5F1076DD31DB413B4F1476C5C20400") Local $tBinASM24_x86 = DllStructCreate("ubyte asm[" & BinaryLen($bBinASM24_x86) & "]") $tBinASM24_x86.asm = $bBinASM24_x86 DllCallAddress("none", DllStructGetPtr($tBinASM24_x86), "ptr", DllStructGetPtr($tParam)) Case Else Local Const $bBinASM24_x64 = Binary("0x575653554989CF4831C990909090909089C841F767104989C189C841F767144989C24831DB48C7C00300000048F7E34C89D24801C2490357084D89C84901C04D0347204D0307498B00488902FFC3FFC3413B5F1876CFFFC1413B4F1C76B25D5B5E5FC20800") Local $tBinASM24_x64 = _DLLStructCreate64("ubyte asm[" & BinaryLen($bBinASM24_x64) & "]") $tBinASM24_x64.asm = $bBinASM24_x64 DllCallAddress("none", DllStructGetPtr($tBinASM24_x64), "ptr", DllStructGetPtr($tParam)) EndSwitch EndSwitch Else For $y = 0 To $iH - 1 $t1 = $y * $stride DllCall($hDLL, "ptr:cdecl", "memcpy", "ptr", DllStructGetPtr($tDestBmp) + $t1, "ptr", DllStructGetPtr($tSrcBmp) + $t1, "uint", $stride) Next EndIf EndSwitch ConsoleWrite(TimerDiff($fTimer) & " ms" & @CRLF) DllClose($hDLL) ;TGA image is stored bottom up in file. Need to flip it. If BitAND($tTGAHeader.imageDescriptor, 0x30) <> 0x20 Then _GDIPlus_ImageRotateFlip($hBitmap, $GDIP_Rotate180FlipX) $tSrcBmp = 0 Return $hBitmap EndFunc ;==>_GDIPlus_TGAImageLoadFromFile ; #INTERNAL_USE_ONLY# =========================================================================================================== ; Name ..........: RemoveNullChars ; Description ...: Converts a null terminated binary string to a string ; Author ........: UEZ ; =============================================================================================================================== Func RemoveNullChars($bin) Local $a = StringRegExp($bin, "[[:xdigit:]+]{2}", 3), $s, $i If @error Then Return $s For $i = 0 To UBound($a) - 1 If $a[$i] = "00" Then ExitLoop $s &= Chr(Dec($a[$i])) Next Return $s EndFunc ;==>RemoveNullChars ; #INTERNAL_USE_ONLY# =========================================================================================================== ; Name ..........: _DLLStructCreate64 ; Description ...: Creates a struct for x64 assembler code execution ; Author ........: AndyG ; =============================================================================================================================== Func _DLLStructCreate64($struct) ;align auf 16-byte Adresse Local $temp = DllStructCreate($struct) Local $tempsize = DllStructGetSize($temp) + 64 Local $ptr = DllStructGetPtr($struct) Local $a1 = Mod(Number($ptr), 64) Local $temp = 0 Local $mem = _MemVirtualAlloc($ptr + $a1, $tempsize, $MEM_COMMIT, $PAGE_EXECUTE_READWRITE) Local $mem_dllstructcreate64_internal = $mem Local $a2 = Mod(Number($mem), 64) ;rest div 16 adresse = offset Local $sstruct = DllStructCreate($struct, (Number($mem) - $a2 + 64)) Return $sstruct ;auf 16 alingned pointer EndFunc ;==>_DLLStructCreate64 Global $sFile = FileOpenDialog("Select a TGA file", "", "TGA image(*.tga)") If @error Then Exit _GDIPlus_Startup() Global $hImage = _GDIPlus_TGAImageLoadFromFile($sFile, True) If @error Then ConsoleWrite(@error & " / " & @extended & @CRLF) _GDIPlus_Shutdown() Exit EndIf ;save result ;~ _GDIPlus_ImageSaveToFile($hImage, @ScriptDir & "\Converted.png") ;~ ShellExecute(@ScriptDir & "\Converted.png") Global $iW = _GDIPlus_ImageGetWidth($hImage), $iH = _GDIPlus_ImageGetHeight($hImage) Global $hGui = GUICreate("TGA Image Loader by UEZ", $iW, $iH) GUISetState() Global $hGraphics = _GDIPlus_GraphicsCreateFromHWND($hGui) _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $iW, $iH) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE _GDIPlus_BitmapDispose($hImage) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() Exit Case $GUI_EVENT_RESTORE _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $iW, $iH) EndSwitch WEnd  
      Here my rookie assembler code ^^:
      #cs _ASM8cm_x86 use32 define tSrcBmp dword[edi] define tDestBmp dword[edi + 04] define colortable dword[edi + 08] define strideSrc dword[edi + 12] define strideDest dword[edi + 16] define w dword[edi + 20] define h dword[edi + 24] define colorTblSize dword[edi + 28] define colorwidth dword[edi + 32] define iOffset dword[edi + 36] define iOffset2 dword[edi + 40] define r5 byte[edi + 44] define g5 byte[edi + 45] define b5 byte[edi + 46] pushad ;~ _ASMDBG_() mov edi, dword[esp + 36] ;pointer to the struct xor ecx, ecx; y = 0 align 16 _y: mov eax, ecx mul strideSrc add eax, colorTblSize mov iOffset, eax ;iOffset = y * $strideSrc + $colorTblSize mov eax, ecx mul strideDest mov iOffset2, eax ;iOffset2 = y * $strideDest xor ebx, ebx ;x = 0 _x: mov eax, iOffset add eax, ebx ;iOffset + x add eax, tSrcBmp mov edx, eax ;edx = iOffset + x + tSrcBmp xor eax, eax mov al, byte[edx] ;get index from color table mul colorwidth ;multiply it with colorwidth -> eax = index of the color table mov edx, colortable add edx, eax mov esi, dword[edx] ;get the color from the color table mov eax, 3 mul ebx ; add eax, iOffset2 ; add eax, tDestBmp ;$x * 3 + iOffset2 + tDestBmp = t1 mov ebp, eax cmp colorwidth, 2 jne _col_rgb mov dx, si ;BitShift(BitAND($col, 0x001F), -3) ;B and dx, 0x001F shl dx, 3 mov b5, dl mov dx, si ;BitShift(BitShift(BitAND($col, 0x03E0), 5), -3) ;G and dx, 0x03E0 shr dx, 5 shl dx, 3 mov g5, dl mov dx, si ;BitShift(BitShift(BitAND($col, 0x7C00), 10), -3) ;R and dx, 0x7C00 shr dx, 10 shl dx, 3 mov r5, dl xor eax, eax ;eax = 0 or al, r5 ;generate rgb value from rgb555 shl eax, 8 or al, g5 shl eax, 8 or al, b5 mov esi, eax _col_rgb: mov dword[ebp], esi ;write to destination inc ebx cmp ebx, w jbe _x inc ecx cmp ecx, h jbe _y ;~ _ASMDBG_() popad ret ;4 #ce _ASM8cm_x86 #cs _ASM8cm_x64 use64 define tSrcBmp qword[r15] define tDestBmp qword[r15 + 08] define colortable qword[r15 + 16] define strideSrc dword[r15 + 24] define strideDest dword[r15 + 28] define w dword[r15 + 32] define h dword[r15 + 36] define colorTblSize dword[r15 + 40] define colorwidth dword[r15 + 44] define iOffset dword[r15 + 48] define iOffset2 dword[r15 + 52] define r5 byte[r15 + 56] define g5 byte[r15 + 57] define b5 byte[r15 + 58] define x r13d define y r14d push rdi push rsi push rbx push rbp mov qword r15, rcx mov y, 0 align 16 _y: mov eax, y mul strideSrc add eax, colorTblSize mov iOffset, eax ;iOffset = y * $strideSrc + $colorTblSize mov eax, y mul strideDest mov iOffset2, eax ;iOffset2 = y * $strideDest xor x, x ;x = 0 _x: mov eax, iOffset add eax, x ;iOffset + x add rax, tSrcBmp mov rdx, rax ;edx = iOffset + x + tSrcBmp xor rax, rax mov al, byte[rdx] ;get index from color table mul colorwidth ;multiply it with colorwidth -> eax = index of the color table mov rdx, colortable add rdx, rax mov r9d, dword[rdx] ;get the color from the color table xor rax, rax mov rax, 3 mul x ; add eax, iOffset2 ; add rax, tDestBmp ;$x * 3 + iOffset2 + tDestBmp = t1 mov r8, rax cmp colorwidth, 2 jne _col_rgb xor rdx, rdx mov dx, r9w ;BitShift(BitAND($col, 0x001F), -3) ;B and dx, 0x001F shl dx, 3 mov b5, dl xor rdx, rdx mov dx, r9w ;BitShift(BitShift(BitAND($col, 0x03E0), 5), -3) ;G and dx, 0x03E0 shr dx, 5 shl dx, 3 mov g5, dl xor rdx, rdx mov dx, r9w ;BitShift(BitShift(BitAND($col, 0x7C00), 10), -3) ;R and dx, 0x7C00 shr dx, 10 shl dx, 3 mov r5, dl xor eax, eax ;eax = 0 or al, r5 ;generate rgb value from rgb555 shl eax, 8 or al, g5 shl eax, 8 or al, b5 mov r9d, eax _col_rgb: mov dword[r8], r9d ;write to destination inc x cmp x, w jbe _x inc y cmp y, h jbe _y pop rbp pop rbx pop rsi pop rdi ret 8 #ce #cs _ASM8_x86 use32 pushad mov edi, dword[esp + 36] ;pointer to the struct define tSrcBmp dword[edi] define tDestBmp dword[edi + 04] define strideSrc dword[edi + 08] define strideDest dword[edi + 12] define w dword[edi + 16] define h dword[edi + 20] define colorTblSize dword[edi + 24] define iOffset dword[edi + 28] define iOffset2 dword[edi + 32] mov ecx, 0 ; y align 16 _y: mov eax, ecx mul strideSrc add eax, colorTblSize mov iOffset, eax ;iOffset = y * $strideSrc + $colorTblSize mov eax, ecx mul strideDest mov iOffset2, eax ;iOffset2 = y * $strideDest xor ebx, ebx ;x = 0 _x: mov ebp, iOffset sub ebp, 2 add ebp, ebx add ebp, tSrcBmp ;ebp = t1 mov eax, 3 mul ebx add eax, iOffset2 add eax, tDestBmp ;eax = t2 mov esi, dword[ebp] ;get the color from source bitmap mov dword[eax], esi ;write to destination inc ebx cmp ebx, w jbe _x inc ecx cmp ecx, h jbe _y popad ret ;4 #ce _ASM8_x86 #cs _ASM8_x64 use64 push rdi push rsi push rbx push rbp define tSrcBmp qword[r15] define tDestBmp qword[r15 + 08] define strideSrc [r15 + 16] define strideDest [r15 + 20] define w [r15 + 24] define h [r15 + 28] define colorTblSize [r15 + 32] define iOffset [r15 + 36] define iOffset2 [r15 + 40] mov qword r15, rcx sub qword colorTblSize, 2 mov ebx, 0 ;w - 1 mov ecx, 0 ;h - 1 align 16 _y: mov eax, ecx mul dword strideSrc mov r10, rax ;r10 = y * $strideSrc mov eax, ecx mul dword strideDest mov r11, rax ;r11 = y * $strideDest _x: mov r8, r10 add r8, rbx add r8, colorTblSize add r8, tSrcBmp ;r8 = t1 mov rax, 3 mul rbx add rax, r11 add rax, tDestBmp ;eax = t2 mov r9, [r8] ;get the color from source bitmap mov dword[rax], r9d ;write to destination inc ebx cmp ebx, w jbe _x xor rbx, rbx inc ecx cmp ecx, h jbe _y pop rbp pop rbx pop rsi pop rdi ret 8 #ce _ASM8_x64 #cs _ASM1516_x86 use32 mov edi, dword[esp + 4] ;pointer to the struct define tSrcBmp ptr[edi] define tDestBmp ptr[edi + 04] define strideSrc dword[edi + 08] define strideDest dword[edi + 12] define w dword[edi + 16] define h dword[edi + 20] define colorTblSize dword[edi + 24] define iOffset dword[edi + 28] define iOffset2 dword[edi + 32] mov ebx, 0 ; x mov ecx, 0 ; y align 16 _y: mov eax, ecx mul strideSrc mov iOffset, eax ;iOffset = y * $strideSrc mov eax, ecx mul strideDest mov iOffset2, eax ;iOffset2 = y * $strideDest _x: mov eax, 2 mul ebx ;x * 2 push eax add eax, iOffset add eax, colorTblSize add eax, tSrcBmp mov edx, eax ;edx = t1 pop eax ;restore x * 2 add eax, iOffset2 add eax, tDestBmp ;eax = t2 mov esi, dword[edx] ;get the color from source bitmap mov word[eax], si ;write to destination inc ebx cmp ebx, w jbe _x xor ebx, ebx inc ecx cmp ecx, h jbe _y ret ;4 #ce _ASM1516_x86 #cs _ASM1516_x64 use64 ;~ define tSrcBmp dword[r15 + 0] ;~ define tDestBmp dword[r15 + 8] ;~ define strideS dword[r15 + 16] ;~ define strideD dword[r15 + 20] ;~ define width dword[r15 + 24] ;~ define height dword[r15 + 28] ;~ define colorTblSize dword[r15 + 32] ;~ define t1 dword[r15 + 36] ;not needed ;~ define t2 dword[r15 + 40] ;not needed push rdi push rsi push rbx push rbp mov qword r15, rcx mov ebx, 0 ;dword[r15 + 24] ;ebx = w - 1 mov ecx, 0 ;dword[r15 + 28] ;ecx = h - 1 align 16 _y: mov eax, ecx mul dword[r15 + 16] mov r9, rax mov eax, ecx mul dword[r15 + 20] mov r10, rax push rbx _x: mov eax, ebx shl eax, 1 mov rdx, r10 add rdx, rax add rdx, [r15 + 8] mov r8, r9 add r8, rax add r8, [r15 + 32] add r8, [r15] mov rax, [r8] mov [rdx], rax inc ebx inc ebx cmp ebx, dword[r15 + 24] jbe _x pop rbx inc ecx cmp ecx, dword[r15 + 28] jbe _y pop rbp pop rbx pop rsi pop rdi ret 8 #ce _ASM1516_x64 #cs _ASM24_x86 use32 mov edi, dword[esp + 4] ;pointer to the struct define tSrcBmp dword[edi] define tDestBmp dword[edi + 04] define strideSrc dword[edi + 08] define strideDest dword[edi + 12] define w dword[edi + 16] define h dword[edi + 20] define colorTblSize dword[edi + 24] define iOffset dword[edi + 28] define iOffset2 dword[edi + 32] mov ebx, 0 ; x mov ecx, 0 ; y align 16 _y: mov eax, ecx mul strideSrc mov iOffset, eax ;iOffset = y * $strideSrc mov eax, ecx mul strideDest mov iOffset2, eax ;iOffset2 = y * $strideDest _x: mov eax, 3 mul ebx ;x * 3 push eax add eax, iOffset add eax, colorTblSize add eax, tSrcBmp mov edx, eax ;edx = t1 pop eax ;restore x * 3 add eax, iOffset2 add eax, tDestBmp ;eax = t2 mov esi, dword[edx] ;get the color from source bitmap mov dword[eax], esi ;write to destination inc ebx cmp ebx, w jbe _x xor ebx, ebx inc ecx cmp ecx, h jbe _y ret ;4 #ce _ASM24_x86 #cs _ASM24_x64 use64 ;~ define tSrcBmp dword[r15 + 0] ;~ define tDestBmp dword[r15 + 8] ;~ define strideS dword[r15 + 16] ;~ define strideD dword[r15 + 20] ;~ define width dword[r15 + 24] ;~ define height dword[r15 + 28] ;~ define colorTblSize dword[r15 + 32] ;~ define t1 dword[r15 + 36] ;not needed ;~ define t2 dword[r15 + 40] ;not needed push rdi push rsi push rbx push rbp mov qword r15, rcx xor rcx, rcx align 16 _y: mov eax, ecx mul dword[r15 + 16] mov r9, rax mov eax, ecx mul dword[r15 + 20] mov r10, rax xor rbx, rbx _x: mov rax, 3 mul rbx mov rdx, r10 add rdx, rax add rdx, [r15 + 8] mov r8, r9 add r8, rax add r8, [r15 + 32] add r8, [r15] mov rax, [r8] mov [rdx], rax ;copy 64 bits inc ebx inc ebx cmp ebx, dword[r15 + 24] jbe _x inc ecx cmp ecx, dword[r15 + 28] jbe _y pop rbp pop rbx pop rsi pop rdi ret 8 #ce _ASM24_x64  
      If you find a TGA image which is in scope of this script but doesn't convert it properly, please report it here.
      Thanks.
×
×
  • Create New...