Jump to content
Sign in to follow this  
kneze

ComboBox

Recommended Posts

kneze

Hi

i do some tests with ComboBox. It works if i use only ComboBox in a form with one Button to run selection.

If i try to add additional Button something goes wrong.

I would like to select from ComboBox an entry and push button run to execute the chosen entry. This works fine.

But if i press button 2 or Button 3 nothing happens. I don't know how i change the code that other Button on the same form

also work.

Could you give me a sugestion how can i do this ?

Thanks.

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

$Form1 = GUICreate("Form1", 419, 241, 437, 263)
$Button_run = GUICtrlCreateButton("run", 318, 198, 67, 31)
$Button_1 = GUICtrlCreateButton("Button2", 18, 132, 121, 25)
$Button_2 = GUICtrlCreateButton("Button3", 18, 162, 121, 25)
$Combo1 = GUICtrlCreateCombo("Combo1", 42, 24, 175, 25, BitOR($CBS_DROPDOWN,$CBS_AUTOHSCROLL))
GUICtrlSetData($Combo1, "|Choice 1|Choice 2|Choice 3|choice 4")
GUISetState(@SW_SHOW)

While 1
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            Exitloop
  
        Case $msg = $Button_run
            Local $readCombo = GuiCtrlRead($Combo1)
            Select
              
            Case $readCombo = "Choice 1"
        MsgBox(0,"","Choice 1")
    
      Case $readCombo = "Choice 2"
           MsgBox(0,"","Choice 2")
    
   Case $readCombo = "Choice 3"
        MsgBox(0,"","Choice 3")
    
      Case $readCombo = "Choice 4"
                 MsgBox(0,"","Choice 4")
  
   EndSelect
    EndSelect
WEnd
func terminate()                                                                     ;exit
    Exit 0
EndFunc
Edited by kneze

Share this post


Link to post
Share on other sites
guinness

Did you create this? Because you have to monitor when GUIGetMsg returns the button ID, like you did with the run button, which is why I asked you did you create this?

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

$Form1 = GUICreate("Form1", 419, 241, 437, 263)
$Button_run = GUICtrlCreateButton("run", 318, 198, 67, 31)
$Button_1 = GUICtrlCreateButton("Button2", 18, 132, 121, 25)
$Button_2 = GUICtrlCreateButton("Button3", 18, 162, 121, 25)
$Combo1 = GUICtrlCreateCombo("Combo1", 42, 24, 175, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL))
GUICtrlSetData($Combo1, "|Choice 1|Choice 2|Choice 3|choice 4")
GUISetState(@SW_SHOW)

While 1
    $iMsg = GUIGetMsg()
    Select
        Case $iMsg = $GUI_EVENT_CLOSE
            ExitLoop

        Case $iMsg = $Button_run
            Local $readCombo = GUICtrlRead($Combo1)
            Select

                Case $readCombo = "Choice 1"
                    MsgBox(0, "", "Choice 1")

                Case $readCombo = "Choice 2"
                    MsgBox(0, "", "Choice 2")

                Case $readCombo = "Choice 3"
                    MsgBox(0, "", "Choice 3")

                Case $readCombo = "Choice 4"
                    MsgBox(0, "", "Choice 4")

            EndSelect

        Case $iMsg = $Button_1
            MsgBox(0, "", "Button 1")

        Case $iMsg = $Button_2
            MsgBox(0, "", "Button 2")
    EndSelect
WEnd

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites
BrewManNH

Buttons 2 and 3 don't do anything because you have no code in there to make them do anything, it isn't magic. You have working code for your run button, and you couldn't figure out how to do the same for the other 2?

Because I'm feeling generous, I modified your script to include message boxes for buttons 2 and 3.

#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

$Form1 = GUICreate("Form1", 419, 241, 437, 263)
$Button_run = GUICtrlCreateButton("run", 318, 198, 67, 31)
$Button_1 = GUICtrlCreateButton("Button2", 18, 132, 121, 25)
$Button_2 = GUICtrlCreateButton("Button3", 18, 162, 121, 25)
$Combo1 = GUICtrlCreateCombo("Combo1", 42, 24, 175, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL))
GUICtrlSetData($Combo1, "|Choice 1|Choice 2|Choice 3|choice 4")
GUISetState(@SW_SHOW)

While 1
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            ExitLoop

        Case $msg = $Button_run
            Local $readCombo = GUICtrlRead($Combo1)
            Select

                Case $readCombo = "Choice 1"
                    MsgBox(0, "", "Choice 1")

                Case $readCombo = "Choice 2"
                    MsgBox(0, "", "Choice 2")

                Case $readCombo = "Choice 3"
                    MsgBox(0, "", "Choice 3")

                Case $readCombo = "Choice 4"
                    MsgBox(0, "", "Choice 4")

        EndSelect
    Case $msg = $Button_1
        MsgBox(64, "Button pressed", "You pressed button 2")
    Case $msg = $Button_2
        MsgBox(64, "Button pressed", "You pressed button 3")
    EndSelect
WEnd
Func terminate() ;exit
    Exit 0
EndFunc   ;==>terminate

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
guinness

thanks BrewManNH it works.

Didn't mine?

UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×