Maarten90

WM_Notify with multiple listviews

16 posts in this topic

Hey all,

 

I was trying to get my WM_NOTIFY function to work on two separate listviews, but when I add my second listview, the script just hangs.
 

Original that works:

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)

    Local $hWndFrom, $iCode, $tNMHDR, $hWndListView
    $hWndListView = $CheckResultsView
    If Not IsHWnd($CheckResultsView) Then $hWndListView = GUICtrlGetHandle($CheckResultsView)

    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndFrom == $CheckResultsView
            Switch $iCode

                Case $NM_DBLCLK  ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                   Local $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)

                   $Index = DllStructGetData($tInfo, "Index")

                   $subitemNR = DllStructGetData($tInfo, "SubItem")


                   ; make sure user clicks on the listview & only the activate
                   If $Index <> -1 Then



                        ;Col item 2 index
                        $item2 = StringSplit(_GUICtrlListView_GetItemTextString($CheckResultsView, $subitemNR),'|')
                        $item2= $item2[2]

                        Ticket_ShowTicketID($item2)


                   EndIf


            EndSwitch

    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

My attempt at making my second listview work:

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)

    Local $hWndFrom, $iCode, $tNMHDR, $hWndListView
    $hWndListView = $CheckResultsView
    If Not IsHWnd($CheckResultsView) Then $hWndListView = GUICtrlGetHandle($CheckResultsView)

    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndFrom == $CheckResultsView
            Switch $iCode

                Case $NM_DBLCLK  ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                   Local $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)

                   $Index = DllStructGetData($tInfo, "Index")

                   $subitemNR = DllStructGetData($tInfo, "SubItem")


                   ; make sure user clicks on the listview & only the activate
                   If $Index <> -1 Then



                        ;Col item 2 index
                        $item2 = StringSplit(_GUICtrlListView_GetItemTextString($CheckResultsView, $subitemNR),'|')
                        $item2= $item2[2]

                        Ticket_ShowTicketID($item2)


                   EndIf


            EndSwitch

        Case $hWndFrom == $incident_ShowTicket_InteractionView
            Switch $iCode

                Case $NM_DBLCLK  ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                   MsgBox(0, "", "Hi!")


            EndSwitch

    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

It just hangs when ran, only a part of the UI is displayed when the last code is used. Why does this happen? Thanks in advance!

Share this post


Link to post
Share on other sites



#2 ·  Posted (edited)

It looks like you didn't get the handle for the second ListView like you did for your first one. 

P.S. a testable script would be nice, too. ;)

 

Edited by MikahS
1 person likes this

Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Share this post


Link to post
Share on other sites

Please check my ADCU example script here. It handles two listviews.

1 person likes this

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

It looks like you didn't get the handle for the second ListView like you did for your first one. 

P.S. a testable script would be nice, too. ;)

 

Attached. When you open hd.au3, you'll find the WM_Notify function at the end of the script. 

script.rar

 

@water

Thanks for your reply, I just c/p'd your WM_Notify and made some changes to it to make it work for my script. But I could not get it to work sadly. Its a nice script you have there which I am sure, I'm going to use. Thanks!

Edited by Maarten90

Share this post


Link to post
Share on other sites

Thank you for including the script. I shall have a look and let you know what I find.

1 person likes this

Snips & Scripts


My Snips: graphCPUTemp ~ getENVvars
My Scripts: Short-Order Encrypter - message and file encryption V1.6.1 ~ AuPad - Notepad written entirely in AutoIt V1.9.4

Feel free to use any of my code for your own use.                                                                                                                                                           Forum FAQ

 

Share this post


Link to post
Share on other sites

Start by removing the MsgBox(). As the helpfile says for GUIRegisterMsg():

Warning: blocking of running user functions which executes window messages with commands such as "MsgBox()" can lead to unexpected behavior, the return to the system should be as fast as possible !!!

1 person likes this

Share this post


Link to post
Share on other sites

#7 ·  Posted (edited)

I struggled with this for quite a bit until I came up with this, works wonderfully (the code was originally posted somewhere else for one listview, I think.  No idea who to credit).  Note the switch for each $lstView (originally $lstApproved, $lstDeclined, $lstMisc) that get assigned to $hWndListView, $hWndListView2, $hWndListView.  From there, its a matter of the $iCode, and then the Case for each thing that can happen.  Add code as needed.  Im my Case, when they doubleclick, it calls ShowTXNFile() with some parameters.

 

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
    #forceref $hWnd, $iMsg, $iwParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $hWndListView2, $hWndListView3, $tInfo

    $hWndListView = $lstApproved
    If Not IsHWnd($lstApproved) Then $hWndListView = GUICtrlGetHandle($lstApproved)
    $hWndListView2 = $lstDeclined
    If Not IsHWnd($lstDeclined) Then $hWndListView2 = GUICtrlGetHandle($lstDeclined)
    $hWndListView3 = $lstMisc
    If Not IsHWnd($lstMisc) Then $hWndListView3 = GUICtrlGetHandle($lstMisc)

    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndListView
            Switch $iCode
                Case $LVN_COLUMNCLICK ; A column was clicked
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _GUICtrlListView_SortItems($hWndFrom, DllStructGetData($tInfo, "SubItem"))
                    _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_DELETEITEM ; An item is about to be deleted
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _DebugPrint("$LVN_DELETEITEM" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_HOTTRACK ; Sent by a list-view control when the user moves the mouse over an item
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    ListView_HOTTRACK(DllStructGetData($tInfo, "SubItem"))
                    ; _DebugPrint("$LVN_HOTTRACK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                    ; "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                    ; "-->Code:" & @TAB & $iCode & @CRLF & _
                    ; "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                    ; "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                    ; "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                    ; "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                    ; "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                    ; "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                    ; "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                    ; "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    Return 0 ; allow the list view to perform its normal track select processing.
                    ;Return 1 ; the item will not be selected.
                Case $LVN_KEYDOWN ; A key has been pressed
                    $tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
                    _DebugPrint("$LVN_KEYDOWN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @CRLF & _
                            "-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
                    ; No return value
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ShowTXNFile($FinalLoadedTXNInfo,_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_Ref),_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_Date))
;~                  ShowTXNFile(_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_FilePTR),_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_FullTXNData))
                    _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_KILLFOCUS ; The control has lost the input focus
                    _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ;Return 1 ; not to allow the default processing
                    Return 0 ; allow the default processing
                Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_SETFOCUS ; The control has received the input focus
                    _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
            EndSwitch
        Case $hWndListView2
            Switch $iCode
                Case $LVN_COLUMNCLICK ; A column was clicked
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _GUICtrlListView_SortItems($hWndFrom, DllStructGetData($tInfo, "SubItem"))
                    _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_DELETEITEM ; An item is about to be deleted
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _DebugPrint("$LVN_DELETEITEM" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_HOTTRACK ; Sent by a list-view control when the user moves the mouse over an item
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    ListView_HOTTRACK(DllStructGetData($tInfo, "SubItem"))
                    ; _DebugPrint("$LVN_HOTTRACK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                    ; "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                    ; "-->Code:" & @TAB & $iCode & @CRLF & _
                    ; "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                    ; "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                    ; "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                    ; "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                    ; "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                    ; "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                    ; "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                    ; "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    Return 0 ; allow the list view to perform its normal track select processing.
                    ;Return 1 ; the item will not be selected.
                Case $LVN_KEYDOWN ; A key has been pressed
                    $tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
                    _DebugPrint("$LVN_KEYDOWN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @CRLF & _
                            "-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
                    ; No return value
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ShowTXNFile($FinalLoadedTXNInfo,_GUICtrlListView_GetItemText($lstDeclined, DllStructGetData($tInfo, "Index"),$C_Ref),_GUICtrlListView_GetItemText($lstDeclined, DllStructGetData($tInfo, "Index"),$C_Date))
                    _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_KILLFOCUS ; The control has lost the input focus
                    _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ;Return 1 ; not to allow the default processing
                    Return 0 ; allow the default processing
                Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_SETFOCUS ; The control has received the input focus
                    _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
            EndSwitch
        Case $hWndListView3
            Switch $iCode
                Case $LVN_COLUMNCLICK ; A column was clicked
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _GUICtrlListView_SortItems($hWndFrom, DllStructGetData($tInfo, "SubItem"))
                    _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_DELETEITEM ; An item is about to be deleted
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _DebugPrint("$LVN_DELETEITEM" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_HOTTRACK ; Sent by a list-view control when the user moves the mouse over an item
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    ListView_HOTTRACK(DllStructGetData($tInfo, "SubItem"))
                    ; _DebugPrint("$LVN_HOTTRACK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                    ; "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                    ; "-->Code:" & @TAB & $iCode & @CRLF & _
                    ; "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                    ; "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                    ; "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                    ; "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                    ; "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                    ; "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                    ; "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                    ; "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    Return 0 ; allow the list view to perform its normal track select processing.
                    ;Return 1 ; the item will not be selected.
                Case $LVN_KEYDOWN ; A key has been pressed
                    $tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
                    _DebugPrint("$LVN_KEYDOWN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @CRLF & _
                            "-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
                    ; No return value
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->Value:" & @TAB & _GUICtrlListView_GetItemText($lstMisc, DllStructGetData($tInfo, "Index"),DllStructGetData($tInfo, "SubItem")) & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ShowTXNFile($FinalLoadedTXNInfo,_GUICtrlListView_GetItemText($lstMisc, DllStructGetData($tInfo, "Index"),$C_Ref),_GUICtrlListView_GetItemText($lstMisc, DllStructGetData($tInfo, "Index"),$C_Date))
                    _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_KILLFOCUS ; The control has lost the input focus
                    _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ;Return 1 ; not to allow the default processing
                    Return 0 ; allow the default processing
                Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_SETFOCUS ; The control has received the input focus
                    _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
            EndSwitch
    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

 

Edited by kaisies
1 person likes this

Share this post


Link to post
Share on other sites

#8 ·  Posted (edited)

I struggled with this for quite a bit until I came up with this, works wonderfully (the code was originally posted somewhere else for one listview, I think.  No idea who to credit).  Note the switch for each $lstView (originally $lstApproved, $lstDeclined, $lstMisc) that get assigned to $hWndListView, $hWndListView2, $hWndListView.  From there, its a matter of the $iCode, and then the Case for each thing that can happen.  Add code as needed.  Im my Case, when they doubleclick, it calls ShowTXNFile() with some parameters.

 

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
    #forceref $hWnd, $iMsg, $iwParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $hWndListView2, $hWndListView3, $tInfo

    $hWndListView = $lstApproved
    If Not IsHWnd($lstApproved) Then $hWndListView = GUICtrlGetHandle($lstApproved)
    $hWndListView2 = $lstDeclined
    If Not IsHWnd($lstDeclined) Then $hWndListView2 = GUICtrlGetHandle($lstDeclined)
    $hWndListView3 = $lstMisc
    If Not IsHWnd($lstMisc) Then $hWndListView3 = GUICtrlGetHandle($lstMisc)

    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndListView
            Switch $iCode
                Case $LVN_COLUMNCLICK ; A column was clicked
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _GUICtrlListView_SortItems($hWndFrom, DllStructGetData($tInfo, "SubItem"))
                    _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_DELETEITEM ; An item is about to be deleted
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _DebugPrint("$LVN_DELETEITEM" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_HOTTRACK ; Sent by a list-view control when the user moves the mouse over an item
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    ListView_HOTTRACK(DllStructGetData($tInfo, "SubItem"))
                    ; _DebugPrint("$LVN_HOTTRACK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                    ; "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                    ; "-->Code:" & @TAB & $iCode & @CRLF & _
                    ; "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                    ; "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                    ; "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                    ; "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                    ; "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                    ; "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                    ; "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                    ; "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    Return 0 ; allow the list view to perform its normal track select processing.
                    ;Return 1 ; the item will not be selected.
                Case $LVN_KEYDOWN ; A key has been pressed
                    $tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
                    _DebugPrint("$LVN_KEYDOWN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @CRLF & _
                            "-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
                    ; No return value
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ShowTXNFile($FinalLoadedTXNInfo,_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_Ref),_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_Date))
;~                  ShowTXNFile(_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_FilePTR),_GUICtrlListView_GetItemText($lstApproved, DllStructGetData($tInfo, "Index"),$C_FullTXNData))
                    _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_KILLFOCUS ; The control has lost the input focus
                    _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ;Return 1 ; not to allow the default processing
                    Return 0 ; allow the default processing
                Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_SETFOCUS ; The control has received the input focus
                    _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
            EndSwitch
        Case $hWndListView2
            Switch $iCode
                Case $LVN_COLUMNCLICK ; A column was clicked
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _GUICtrlListView_SortItems($hWndFrom, DllStructGetData($tInfo, "SubItem"))
                    _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_DELETEITEM ; An item is about to be deleted
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _DebugPrint("$LVN_DELETEITEM" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_HOTTRACK ; Sent by a list-view control when the user moves the mouse over an item
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    ListView_HOTTRACK(DllStructGetData($tInfo, "SubItem"))
                    ; _DebugPrint("$LVN_HOTTRACK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                    ; "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                    ; "-->Code:" & @TAB & $iCode & @CRLF & _
                    ; "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                    ; "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                    ; "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                    ; "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                    ; "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                    ; "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                    ; "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                    ; "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    Return 0 ; allow the list view to perform its normal track select processing.
                    ;Return 1 ; the item will not be selected.
                Case $LVN_KEYDOWN ; A key has been pressed
                    $tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
                    _DebugPrint("$LVN_KEYDOWN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @CRLF & _
                            "-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
                    ; No return value
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ShowTXNFile($FinalLoadedTXNInfo,_GUICtrlListView_GetItemText($lstDeclined, DllStructGetData($tInfo, "Index"),$C_Ref),_GUICtrlListView_GetItemText($lstDeclined, DllStructGetData($tInfo, "Index"),$C_Date))
                    _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_KILLFOCUS ; The control has lost the input focus
                    _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ;Return 1 ; not to allow the default processing
                    Return 0 ; allow the default processing
                Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_SETFOCUS ; The control has received the input focus
                    _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
            EndSwitch
        Case $hWndListView3
            Switch $iCode
                Case $LVN_COLUMNCLICK ; A column was clicked
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _GUICtrlListView_SortItems($hWndFrom, DllStructGetData($tInfo, "SubItem"))
                    _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_DELETEITEM ; An item is about to be deleted
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    _DebugPrint("$LVN_DELETEITEM" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    ; No return value
                Case $LVN_HOTTRACK ; Sent by a list-view control when the user moves the mouse over an item
                    $tInfo = DllStructCreate($tagNMLISTVIEW, $ilParam)
                    ListView_HOTTRACK(DllStructGetData($tInfo, "SubItem"))
                    ; _DebugPrint("$LVN_HOTTRACK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                    ; "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                    ; "-->Code:" & @TAB & $iCode & @CRLF & _
                    ; "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _
                    ; "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                    ; "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                    ; "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                    ; "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                    ; "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                    ; "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                    ; "-->Param:" & @TAB & DllStructGetData($tInfo, "Param"))
                    Return 0 ; allow the list view to perform its normal track select processing.
                    ;Return 1 ; the item will not be selected.
                Case $LVN_KEYDOWN ; A key has been pressed
                    $tInfo = DllStructCreate($tagNMLVKEYDOWN, $ilParam)
                    _DebugPrint("$LVN_KEYDOWN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->VKey:" & @TAB & DllStructGetData($tInfo, "VKey") & @CRLF & _
                            "-->Flags:" & @TAB & DllStructGetData($tInfo, "Flags"))
                    ; No return value
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->Value:" & @TAB & _GUICtrlListView_GetItemText($lstMisc, DllStructGetData($tInfo, "Index"),DllStructGetData($tInfo, "SubItem")) & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ShowTXNFile($FinalLoadedTXNInfo,_GUICtrlListView_GetItemText($lstMisc, DllStructGetData($tInfo, "Index"),$C_Ref),_GUICtrlListView_GetItemText($lstMisc, DllStructGetData($tInfo, "Index"),$C_Date))
                    _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_KILLFOCUS ; The control has lost the input focus
                    _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ;Return 1 ; not to allow the default processing
                    Return 0 ; allow the default processing
                Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode & @CRLF & _
                            "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _
                            "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _
                            "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _
                            "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _
                            "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _
                            "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _
                            "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _
                            "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _
                            "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags"))
                    ; No return value
                Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key
                    _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
                Case $NM_SETFOCUS ; The control has received the input focus
                    _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _
                            "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _
                            "-->Code:" & @TAB & $iCode)
                    ; No return value
            EndSwitch
    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

 

Thanks so much for this! I implemented this, and ofcourse I made some changes to fit my needs, but with two listview, is still get a GUI that loads for 50% and then hangs (need to kill via taskmanager to exit)

After the changes my WM_NOTIFY looks like this:

 

 
Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
    #forceref $hWnd, $iMsg, $iwParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $hWndListView2, $hWndListView3, $tInfo
    $hWndListView = $CheckResultsView
    If Not IsHWnd($CheckResultsView) Then $hWndListView = GUICtrlGetHandle($CheckResultsView)
    $hWndListView2 = $incident_ShowTicket_InteractionView
    If Not IsHWnd($incident_ShowTicket_InteractionView) Then $hWndListView2 = GUICtrlGetHandle($incident_ShowTicket_InteractionView)
    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndListView
            Switch $iCode
                Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    $Index = DllStructGetData($tInfo, "Index")
                   $subitemNR = DllStructGetData($tInfo, "SubItem")

                   ; make sure user clicks on the listview & only the activate
                   If $Index <> -1 Then
 
                        ;Col item 2 index
                        $item2 = StringSplit(_GUICtrlListView_GetItemTextString($CheckResultsView, $subitemNR),'|')
                        $item2= $item2[2]
                        Ticket_ShowTicketID($item2)

                   EndIf
                    ; No return value
            EndSwitch
        Case $hWndListView2
            Switch $iCode
                Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
                    ConsoleWrite("test")
            EndSwitch
    EndSwitch
    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY
[/code]

@AdmiralAlkex

I got rid of that MSGBox, but it sadly doesnt change anything. Thanks for the help :) .

Edited by Maarten90

Share this post


Link to post
Share on other sites

If you comment out the WM_NOTIFY GUIRegisterMsg, does the script still hang?  At a quick glance, your WM_NOTIFY looks OK, and shouldn't hang the program (although I don't know what Ticket_ShowTicketID() does.

 

Side note.. a ticket system?  Fun :D  been rolling around a framework in my head for one myself.

1 person likes this

Share this post


Link to post
Share on other sites

If you comment out the WM_NOTIFY GUIRegisterMsg, does the script still hang?  At a quick glance, your WM_NOTIFY looks OK, and shouldn't hang the program (although I don't know what Ticket_ShowTicketID() does.

 

Side note.. a ticket system?  Fun :D  been rolling around a framework in my head for one myself.

When I comment the guiregistermsg , it doesnt hang anymore. And yes, a ticket system. Just for fun at the moment.

Share this post


Link to post
Share on other sites

When I comment the guiregistermsg , it doesnt hang anymore. And yes, a ticket system. Just for fun at the moment.

cool, so it's the WM_Notify for sure.  At this point I could guess a bunch of times, but posting your full code is typically best way to get past an error :)

Share this post


Link to post
Share on other sites

cool, so it's the WM_Notify for sure.  At this point I could guess a bunch of times, but posting your full code is typically best way to get past an error :)

Code has already been posted, see my second post :)

Share this post


Link to post
Share on other sites

Code has already been posted, see my second post :)

Let me rephrase, it is customary to post a runnable script, rather than have someone create a GUI on the fly to meet your bug checking criteria :)

Share this post


Link to post
Share on other sites

Here is just one of many ways to accomplish your goal.

#Include <StructureConstants.au3>
#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>

Global $fPCEDblClck = False;a global flag to trigger internal message handler
Global $hMainGui = GUICreate("SomeTitle",240,200)
Global $idListView1 = GUICtrlCreateListView("Column A|Column B",-1,-1,120,200)
Global $idListView2 = GUICtrlCreateListView("Column A|Column B",120,-1,120,200)
Global $dLVhWnd,$dLVIndex,$dLVSubItem
GUISetState()
GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")
__LoadListViews()
While 1
    $Msg = GUIGetMsg(1)
    Switch $Msg[1]
        Case $hMainGui
            Switch $Msg[0]
                Case $GUI_EVENT_CLOSE
                    GUIDelete($hMainGui)
                    Exit
            EndSwitch
    EndSwitch
    If $fPCEDblClck Then __SomeFunction(); if the flag = True Then call your function/s
WEnd

Func __SomeFunction()
    $fPCEDblClck = False;reset flag first
    ConsoleWrite("ListView Handle: " & $dLVhWnd & @CRLF)
    ConsoleWrite("ListView Index: " & $dLVIndex & @CRLF)
    ConsoleWrite("SubItem: " & $dLVSubItem  & @CRLF)
EndFunc

Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)
    #forceref $hWnd, $iMsg, $iwParam
    Local $hWndFrom, $iCode, $tNMHDR
    $tNMHDR = DllStructCreate($tagNMHDR, $ilParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $iCode
        Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button
            $tInfo = DllStructCreate($tagNMITEMACTIVATE, $ilParam)
            $dLVhWnd = $hWndFrom
            $dLVIndex = DllStructGetData($tInfo, "Index")
            $dLVSubItem = DllStructGetData($tInfo, "SubItem")
            $fPCEDblClck = True
    EndSwitch
    Return $GUI_RUNDEFMSG;return back to Autoit message handler
EndFunc   ;==>WM_NOTIFY

Func __LoadListViews()
    For $i = 0 To 9
        GUICtrlCreateListViewItem($i,$idListView1)
        GUICtrlCreateListViewItem($i,$idListView2)
    Next
EndFunc

 

Share this post


Link to post
Share on other sites

#15 ·  Posted (edited)

Maarten90,

Example of handling multiple columns in multiple listviews...

#include <GUIConstantsEx.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <StaticConstants.au3>
#include <StructureConstants.au3>
#include <GuiListView.au3>
#include <array.au3>

Local $gui010 = GUICreate('Listview Example', 600, 400)
Local $lv010 = GUICtrlCreateListView('', 10, 10, 280, 380)
_GUICtrlListView_SetExtendedListViewStyle($lv010, $LVS_EX_GRIDLINES)
Local $hlv010 = GUICtrlGetHandle($lv010)

Local $lv020 = GUICtrlCreateListView('', 300, 10, 280, 180)
_GUICtrlListView_SetExtendedListViewStyle($lv020, $LVS_EX_GRIDLINES)
Local $hlv020 = GUICtrlGetHandle($lv020)

Local $lv030 = GUICtrlCreateListView('', 300, 200, 280, 190)
_GUICtrlListView_SetExtendedListViewStyle($lv030, $LVS_EX_GRIDLINES)
Local $hlv030 = GUICtrlGetHandle($lv030)

Local $iNumCol = 5
For $1 = 1 To $iNumCol

    _GUICtrlListView_AddColumn($hlv010, $1)
    _GUICtrlListView_AddColumn($hlv020, $1)
    _GUICtrlListView_AddColumn($hlv030, $1)
Next

For $1 = 1 To 10
    _GUICtrlListView_AddItem($hlv010, Random(1, 100, 1))
    _GUICtrlListView_AddItem($hlv020, Random(1, 100, 1))
    _GUICtrlListView_AddItem($hlv030, Random(1, 100, 1))
    For $2 = 1 To _GUICtrlListView_GetColumnCount($hlv010)
        _GUICtrlListView_AddSubItem($hlv010, $1 - 1, Random(1, 100, 1), $2)
    Next
    For $2 = 1 To _GUICtrlListView_GetColumnCount($hlv020)
        _GUICtrlListView_AddSubItem($hlv020, $1 - 1, Random(1, 100, 1), $2)
    Next
    For $2 = 1 To _GUICtrlListView_GetColumnCount($hlv030)
        _GUICtrlListView_AddSubItem($hlv030, $1 - 1, Random(1, 100, 1), $2)
    Next
Next

Local $lv_dummy = GUICtrlCreateDummy()

GUISetState()

GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

Local $aRET[3], $str



While 1
    Switch GUIGetMsg()
        Case $gui_event_close
            Exit
        Case $lv_dummy
            Switch $aRET[0]
                Case $lv010
                    $str = '$lv010'
                Case $lv020
                    $str = '$lv020'
                Case $lv030
                    $str = '$lv030'
            EndSwitch

            ConsoleWrite(_GUICtrlListView_GetItemText($aRET[0], $aRET[1], $aRET[2]) & ' returned from Listview = ' & _
                    $str & @CRLF)
    EndSwitch

WEnd



Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam)

    Local $tNMHDR = DllStructCreate($tagNMHDR, $ilParam), $aTMP[2]

    Switch $tNMHDR.Code
        Case $nm_dblclk

            ; detect DBL_CLK and action the listview dummy control
            $aRET[0] = $tNMHDR.IDFrom

            $aTMP = _GUICtrlListView_SubItemHitTest(GUICtrlGetHandle($aRET[0]))
            $aRET[1] = $aTMP[0]
            $aRET[2] = $aTMP[1]
            GUICtrlSendToDummy($lv_dummy)
    EndSwitch



    Return $GUI_RUNDEFMSG
EndFunc   ;==>WM_NOTIFY

kylomas

Edited by kylomas

Forum Rules         Procedure for posting code

"I like pigs.  Dogs look up to us.  Cats look down on us.  Pigs treat us as equals."

- Sir Winston Churchill

Share this post


Link to post
Share on other sites

Let me rephrase, it is customary to post a runnable script, rather than have someone create a GUI on the fly to meet your bug checking criteria :)

I'm tarded, found your post with your script, and found your issue.  On line 95 you are calling:

GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")

And then after that you are doing stuff (creating GUI, I think.. I'm not a GUI Expert) which causes WM_NOTIFY to fire.  This causes your script to hang because you haven't created your second listview, so it looks for something that isn't there, and freaks out.

Change this on line 37:

Global $searchresult, $incident_add_save_agent, $incident_add_save_category, $incident_add_save_company, $incident_add_save_contact, $incident_add_save_status, $incident_add_companyname2, $incident_add_save_priority, $incident_add_t_companyname

to this:

Global $searchresult, $incident_add_save_agent, $incident_add_save_category, $incident_add_save_company, $incident_add_save_contact, $incident_add_save_status, $incident_add_companyname2, $incident_add_save_priority, $incident_add_t_companyname, $incident_ShowTicket_InteractionView = 9999, $CheckResultsView= 9998

And your problem will go away.

 

Also, this is the common practice for multiple GUI windows (Basically just assign them all different [and high] numbers), prior to them being displayed or if you GUIDelete, so you aren't firing:

$iMsg = GUIGetMsg()
    Switch $iMsg

On something while deleting it, causing crazy behavior.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now