Jump to content

Recommended Posts

This works:

Local $json[]
Local $map[]
$map['test'] = 'hello'
Local $array[5] = [1, 2, 3, 4, 5]
$json["data"] = $map
$json["data"]["arr"] = $array
ConsoleWrite(($json["data"]["arr"])[1] & @CRLF)

 

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites
1 minute ago, water said:
 

This works:

Local $json[]
Local $map[]
$map['test'] = 'hello'
Local $array[5] = [1, 2, 3, 4, 5]
$json["data"] = $map
$json["data"]["arr"] = $array
ConsoleWrite(($json["data"]["arr"])[1] & @CRLF)

 

Awesome! But how i can set the value for the array element then?

Local $json[]
Local $map[]
$map['test'] = 'hello'
Local $array[5] = [1, 2, 3, 4, 5]
$json["data"] = $map
$json["data"]["arr"] = $array
ConsoleWrite(($json["data"]["arr"])[1] & @CRLF)
($json["data"]["arr"])[1]=0
ConsoleWrite(($json["data"]["arr"])[1] & @CRLF)

 

Link to post
Share on other sites

You need to extract the array, modify it and then re-assign it to the map:

Local $json[]
Local $map[]
$map['test'] = 'hello'
Local $array[5] = [1, 2, 3, 4, 5]
$json["data"] = $map
$json["data"]["arr"] = $array
ConsoleWrite(($json["data"]["arr"])[1] & @CRLF)
$aTemp = $json.data.arr
$aTemp[1] = "X"
$json.data.arr = $aTemp
ConsoleWrite(($json["data"]["arr"])[1] & @CRLF)

 

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

:)

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2022-02-19 - Version 1.6.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
OutlookEX (2021-11-16 - Version 1.7.0.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX_GUI (2021-04-13 - Version 1.4.0.0) - Download
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
PowerPoint (2021-08-31 - Version 1.5.0.0) - Download - General Help & Support - Example Scripts - Wiki
Task Scheduler (NEW 2022-07-28 - Version 1.6.0.1) - Download - General Help & Support - Wiki

Standard UDFs:
Excel - Example Scripts - Wiki
Word - Wiki

Tutorials:
ADO - Wiki
WebDriver - Wiki

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By TheAlienDoctor
      Hi, I was looking into creating a script that would detect if a file exists, then move it (and in some cases rename it, depending on the file) as well as write to a log file.
      The issue is, there is a lot of files that need to be moved, sometimes some files will exist and others won't depending on the use-case. However if a file does exist, it will always be going into the same directory with the same name.
      Currently I have an array nested inside of the array, with each array inside that array having both the old and new directory, and then a For loop to actually run through and do the file transferring. The issue I am having is how to call the Array inside of the array, because how do I specify  which the old directory is and which the new is?
      Global $FileTransfer[2000] = [Global $Dir1[2] = ["original dir 1", "new dir 1"], Global $Dir2[2] = ["original dir 2", "new dir 2"]] For $FileTransfer = [0] To [1] Step +1 If FileExists({original dir}) Then FileMove({original dir}, new dir, 1) FileOpen("log.latest.txt", 1) FileWrite("log.latest.txt", "{original dir} found, moved it to new dir." & @CRLF) FileClose("log.latest.txt") Else FileOpen("log_latest.txt", 1) FileWrite("log_latest.txt", "{original dir} not found, ignoreing it." & @CRLF) FileClose("log_latest.txt") EndIf Next I have put what I want the old and new directory to be for each array in {}, so hopefully its easier to tell which part is working and whats not.

      I am still reasonably new to AutoIT, any help is appreciated. Thankyou
    • By arunkw
      I have a spreadsheet - daily routine which has two columns: activity and time as shown here
      | Activity             | Time     | |----------------------|----------| | Sleep               |  6:00 am | | Toilet              |  6:15 am | | Get ready for gym  |  6:30 am | | Exercise            |  7:50 am | | ... more things      |  9:00 pm | | ... still more       | 10:45 pm | | Sleep               |  6:00 am |   I wanted to find out, say in C1 which activity is current for me using now() I.e., if it’s 6:45am on my watch, it should show me Exercise  in C1 Thanks to Adam D. PE, this formula works like magic to get the result =VLOOKUP(MOD(NOW(),1),{B2:B,A2:A},2,1)   Now, I want to reproduce same result in autoit, how to do that? To have easy solution say, I copy-paste spreadsheet data in array directly in code, right? Use for loop and run the above vlookup function and show the answer using tooltip. How to achieve this? please help.  
    • By goku200
      I have an Autoit script that lists files from a folder into an array list. Is there a way to separate the filenames by an underscore and include the id, version, name and date into separate columns in Excel.
      Example of filename:
      12345_v1.0_TEST Name [12345]_01.01.2022.html
      12345 would be in one column
      v1.0 would be in another column
      TEST Name [12345] would be in another column
      01.01.2022 would be in another column
      .html would be in another column
      Note: filenames always change each day.
      Here is my code that lists the files into column C and then writes the column Headers into Column D, E, F, G. Just need some help with separating them into columns by the _ delimiter
       
    • By t0nZ
      I was searching for a way to highlight zones (regions, provinces, counties, etc) on a map, and I don't need  super precise maps so I wrote this script, based on picking up black and white maps (2 colors BW .png or .gif tested) and filling them with colors, writing down a sqlite database to associate zones with names (and other data as well), and reuse the map and the DB to display data, in my example reading a simple .txt file.
      It's all based on this thread  and this other thread.

      So I have two modes:
      The Map "creation mode" : you provide a map image and you start to pick up colors, set "upper level" region/state, and by clicking on a region you fill it and you name it, and all the data are saved on a sqlite DB (auto-created) when you have the map image and a DB with the correct associations, you can switch the "mode" to "show" (as by .ini file) and the script tries to read a "datafile" showing the zone names listed in datafile. The code:
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Icon=Icone\mapFlooder.ico #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** ;MAP Flooder ;(C) NSC 2021 #include <GUIConstants.au3> #include <_GOLLOG.au3> #include <SQLite.au3> #include <SQLite.dll.au3> #include <Misc.au3> #include <GDIPlus.au3> Opt("mousecoordmode", 2) Global $prgname = "MAP Flooder", $ver = "V.0.7", $Buttoncolor = "0xFF00FF", $MPini = @ScriptDir & "\MapFlooder.ini", $btest Global $dbfullpath, $dbtable, $dbFields, $mapfile, $FloodMode, $datafile Global $HDC, $hBrush, $hGraphics, $obj_orig Global $Pic1, $gui, $width, $height, $bColor, $realtimeCoords, $lastclickcoords, $inputSup, $zonecountNum,$labeltest #Region program Gollog(">>>>>> Start MAP Flooder " & $ver) ctrlini() Gui() SQLiteDBcreate() If $FloodMode = "createdb" Then Gollog("CreateDB Mode") DBFlooder() Else Gollog("Show MAP mode") MapShow("show") EndIf Close() #EndRegion program #Region funcS Func Gui() _GDIPlus_Startup() $Pic1 = _GDIPlus_BitmapCreateFromFile($mapfile) $width = _GDIPlus_ImageGetWidth($Pic1) $height = _GDIPlus_ImageGetHeight($Pic1) If $FloodMode = "createdb" Then $gui = GUICreate($prgname & " " & $ver, $width + 150, $height) $labelLoadedMap = GUICtrlCreateLabel("Loaded Map", $width + 10, 5) $labelLoadedMap2 = GUICtrlCreateLabel(_FileToFileName($mapfile), $width + 10, 25) $labeldim = GUICtrlCreateLabel("Width*Height", $width + 10, 45) $labeldim2 = GUICtrlCreateLabel($width & " * " & $height, $width + 10, 65) $lastclickcoordslabel = GUICtrlCreateLabel("Last Click Coords", $width + 10, 100) $lastclickcoords = GUICtrlCreateLabel("xx - xx", $width + 10, 120, 180, 20) $realtimeCoordslabel = GUICtrlCreateLabel("Real Time Coords", $width + 10, 140) $realtimeCoords = GUICtrlCreateLabel("Real Time Coords", $width + 10, 160, 80, 20) $SuPzonelabel = GUICtrlCreateLabel("Supzone (region-state)", $width + 10, 200) $inputSup = GUICtrlCreateInput("sup", $width + 10, 220, 80, 20) $bColor = GUICtrlCreateButton($Buttoncolor, $width + 10, 250, 130, 30) GUICtrlSetBkColor($bColor, $Buttoncolor) $zonecountlabel = GUICtrlCreateLabel("Done Zone Count:", $width + 10, 320, 100, 20) $zonecountNum = GUICtrlCreateLabel("x", $width + 10, 340, 100, 20) $btest = GUICtrlCreateButton("TEST MAP", $width + 10, 380, 130, 30) $labeltest = GUICtrlCreateLabel("", $width + 10, 420, 130, 30) Else $gui = GUICreate($prgname & " " & $ver, $width, $height) EndIf GUISetState() $HDC = _WinAPI_GetDC($gui) $hGraphics = _GDIPlus_GraphicsCreateFromHDC($HDC) _GDIPlus_GraphicsDrawImageRect($hGraphics, $Pic1, 0, 0, $width, $height) EndFunc ;==>Gui Func MapShow($showmode) ; reading a simple text file with zone names, searching for names in DB and fill the map using stored coordinates If $showmode = "show" Then Local $aLines = FileReadToArray($datafile) Local $iLineCount = @extended EndIf If $showmode = "test" Then $iLineCount = 1 If @error Then MsgBox(48, "MapFlooder", "There was an error reading the data file. @error: " & @error) ; Gollog("There was an error reading the data file. @error: " & @error) Close() Else Gollog("start filling zones") _SQLite_Startup() _SQLite_Open($dbfullpath) ; open Database with zone definitions Local $hQuery, $aRow For $i = 0 To $iLineCount - 1 If $showmode = "show" Then _SQLite_Query(-1, "SELECT * FROM " & $dbtable & " where zone = '" & $aLines[$i] & "' ORDER BY zone ASC;", $hQuery) ; the query EndIf If $showmode = "test" Then _SQLite_Query(-1, "SELECT * FROM " & $dbtable & " ORDER BY zone ASC;", $hQuery) ; the query EndIf While _SQLite_FetchData($hQuery, $aRow) = $SQLITE_OK $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $aRow[2]) ; fill color read from DB $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) DllCall("gdi32.dll", "int", "FloodFill", "int", $HDC, "int", $aRow[3], "int", $aRow[4], "int", 0x000000) If $showmode = "test" Then GUICtrlSetData($labeltest,$aRow[0]) Sleep(200) GUISetState() EndIf WEnd _SQLite_QueryFinalize($hQuery) Next _SQLite_Close() _SQLite_Shutdown() EndIf While 1 $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then ExitLoop WEnd EndFunc ;==>MapShow Func DBFlooder() $zonecount = 0 While 1 $mp = MouseGetPos() GUICtrlSetData($realtimeCoords, $mp[0] & " - " & $mp[1]) $msg = GUIGetMsg() If $msg = $GUI_EVENT_CLOSE Then ExitLoop If $msg = $bColor Then colorP() If $msg = $btest Then MapShow("Test") If $mp[0] < $width And $mp[1] < $height And _IsPressed("01") And WinActive($gui) Then $mp = MouseGetPos() GUICtrlSetData($lastclickcoords, $mp[0] & " - " & $mp[1]) $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $Buttoncolor) ; fill color ok $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) DllCall("gdi32.dll", "int", "FloodFill", "int", $HDC, "int", $mp[0], "int", $mp[1], "int", 0x000000) Local $Zone = InputBox("Map Floode", "Zone ?") If $Zone = "" Or @error = 1 Then ; when manage wrong click, possibility to repeat ; set 'temp' color to highlight the 'wrong' click $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", 0x4ccfc6) ; fill color wrong $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) DllCall("gdi32.dll", "int", "FloodFill", "int", $HDC, "int", $mp[0], "int", $mp[1], "int", 0x000000) ; restore color $hBrush = DllCall("gdi32.dll", "long", "CreateSolidBrush", "int", $Buttoncolor) ; fill color ok $obj_orig = DllCall("gdi32.dll", "int", "SelectObject", "int", $HDC, "int", $hBrush[0]) Else _SQLite_Startup() _SQLite_Open($dbfullpath) ; open Database Local $SupZone = GUICtrlRead($inputSup) Local $data = '"' & $Zone & '","' & $SupZone & '","' & $Buttoncolor & '",' & $mp[0] & "," & $mp[1] _SQLite_Exec(-1, "INSERT INTO " & $dbtable & "(" & $dbFields & ") VALUES (" & $data & ");") If @error = -1 Then GOLLOG("Error insert record") MsgBox(48, "Error", "insert record") EndIf $zonecount += 1 GUICtrlSetData($zonecountNum, $zonecount) _SQLite_Close() _SQLite_Shutdown() EndIf EndIf WEnd EndFunc ;==>DBFlooder Func Close() Gollog("<<<<<<< closing...") _WinAPI_ReleaseDC($gui, $HDC) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_Shutdown() Exit EndFunc ;==>Close Func SQLiteDBcreate() ;complete path e filename If Not FileExists($dbfullpath) Then GOLLOG("perform SQLite DB creation") Local $dbfolder = _FileToFilePath($dbfullpath) ;Local $dbfile = _FileToFileName($dbfullpath) If Not FileExists($dbfolder) Then DirCreate($dbfolder) ; =====================>>>>> START SQL DLL _SQLite_Startup() _SQLite_Open($dbfullpath) ; open Database ; creating first table If _SQLite_Exec(-1, "CREATE TABLE " & $dbtable & " (" & $dbFields & ");") = $SQLITE_OK Then GOLLOG("DB table - " & $dbtable & " - creation ok") Else GOLLOG("Error creating DB table : " & @error) EndIf _SQLite_Close() _SQLite_Shutdown() Else Gollog("DB already exist") EndIf EndFunc ;==>SQLiteDBcreate ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFilePath ; Description ...: Returns a folder path from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFilePath($sPath) ; Parameters ....: $sPath - a string value. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFilePath($sPath) Local $sReturn = StringLeft($sPath, StringInStr($sPath, "\", 0, -1) - 1) Return ($sReturn) EndFunc ;==>_FileToFilePath ; #FUNCTION# ==================================================================================================================== ; Name ..........: _FileToFileName ; Description ...: Returns a filename from a FQPN (Fully Qualified Path Name) ; Syntax ........: _FileToFileName($sPath[, $bIncludeExtension = True]) ; Parameters ....: $sPath - a string value. ; $bIncludeExtension - [optional] a boolean value. Default is True. ; Return values .: Success - String ; Failure - Empty string as returned from StringLeft() ; Author ........: Sam Coates ; =============================================================================================================================== Func _FileToFileName($sPath, $bIncludeExtension = True) Local $sReturn = StringTrimLeft($sPath, StringInStr($sPath, "\", 0, -1)) If $bIncludeExtension = False Then $sReturn = StringLeft($sReturn, StringInStr($sReturn, ".", 0, -1) - 1) Return ($sReturn) EndFunc ;==>_FileToFileName Func colorP() ; modified for BGR color GOLLOG("Color Picker") Local $color = _ChooseColor(2) If $color = -1 Then GOLLOG("no color selected") Else Local $sCr = Hex($color, 6) Local $RGB_Buttoncolor = '0x' & StringMid($sCr, 1, 2) & StringMid($sCr, 3, 2) & StringMid($sCr, 5, 2) GUICtrlSetBkColor($bColor, $RGB_Buttoncolor) ; BGR color $Buttoncolor = '0x' & StringMid($sCr, 5, 2) & StringMid($sCr, 3, 2) & StringMid($sCr, 1, 2) GUICtrlSetData($bColor, $Buttoncolor) GOLLOG("new color " & $Buttoncolor & " selected") EndIf EndFunc ;==>colorP Func ctrlini() ;ini read If FileExists($MPini) Then GOLLOG("found: " & $MPini) $mapfile = IniRead($MPini, "map", "mapfile", "") $datafile = IniRead($MPini, "map", "datafile", "") $dbfullpath = IniRead($MPini, "db", "dbfullpath", "") $dbtable = IniRead($MPini, "db", "dbtable", "") $dbFields = IniRead($MPini, "db", "dbfields", "") $FloodMode = IniRead($MPini, "mode", "mode", "") Else GOLLOG($MPini & " NOT found..") Close() EndIf EndFunc ;==>ctrlini #EndRegion funcS All the needed files plus some example (image maps and DBs)
      Link to all demo files
      To test, copy all in a single folder and adjust the mapflooder.ini, also you can add to you includes the _gollog.au3 (used for log, you can avoid it deleting all Gollog() lines)
       
       
       
       
       
    • By mLipok
      Usually when I collect data from DataBase I need to give EndUser a possibility to select rows which should be taken in the processing loop.
      I was searching on the forum and I'm not able to find any UDF or even example of how to select data from array.
      I have my own solutions but I think they are not worth posting on the forum as it is very old code and I am looking for a better solution.

      Could anybody point me to some examples/solutions ?

      Thank you in advance.
      @mLipok
×
×
  • Create New...