AndyS19 Posted August 11, 2017 Share Posted August 11, 2017 I have a listview with 3 columns and I want to set the 3rd column's color based on the item's 'Param' value, but even though I set up for the 3rd column, the entire row always gets the color. My test code is below, but here is the pertinent code: expandcollapse popupFunc WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam) #forceref $hWnd, $iMsg, $iwParam, $ilParam Local $hWndFrom, $iCode, $tNMHDR $tNMHDR = DllStructCreate($tagNMHDR, $ilParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hListView Switch $iCode Case $NM_CUSTOMDRAW Local $iDrawStage, $tCustDraw $tCustDraw = DllStructCreate($tagNMLVCUSTOMDRAW, $ilParam) $iDrawStage = DllStructGetData($tCustDraw, 'dwDrawStage') Switch $iDrawStage Case BitOR(0, $CDDS_ITEMPREPAINT) ;, $CDDS_SUBITEM) setItemColor($tCustDraw, $hWndFrom) Return $CDRF_NOTIFYSUBITEMDRAW EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func setItemColor($tCustDraw, $hWnd) Local $iIndex, $color, $iSubitem $iIndex = DllStructGetData($tCustDraw, 'dwItemSpec') ; item number $color = _GUICtrlListView_GetItemParam($hWnd, $iIndex) $iSubitem = DllStructGetData($tCustDraw, 'iSubItem') ; Here, I want to only change the color of the 3rd col, and not the 1st and 2nd cols DllStructSetData($tCustDraw, 'iSubItem', 2) ; always use the 3rd column (the 'sample' col) logmsg("+++: setItemColor($tCustDraw, 0x" & Hex($hWnd) & ") entered ... " _ & ", $iIndex = " & $iIndex & ", $iSubItem = " & $iSubitem & ", $color = " & Hex($color)) DllStructSetData($tCustDraw, 'clrText', $color) ; set the Text color DllStructSetData($tCustDraw, 'clrTextBk', bitnot($color)) ; set the background color EndFunc ;==>setItemColor Func logmsg($msg, $lnum = @ScriptLineNumber) ConsoleWrite("+++:" & $lnum & ": " & $msg & @CRLF) EndFunc ;==>logmsg Here is the full test code: expandcollapse popup#include-once ;#cs #NoTrayIcon #AutoIt3Wrapper_UseUpx=n #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 #AutoIt3Wrapper_UseX64=N Opt("GUICloseOnESC", 1) ; ESC closes GUI? (0 = no, 1 = yes) Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Opt('MustDeclareVars', 1) OnAutoItExitRegister("_test_exit") Opt("GUIEventOptions", 1) ;0=default, 1=just notification, 2=GuiCtrlRead tab index Opt("WinTitleMatchMode", -2) ;1=start, 2=subStr, 3=exact, 4=advanced, -1 to -4=Nocase #include <GuiListBox.au3> #include <ListViewConstants.au3> #include <GuiListView.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <ColorConstants.au3> Global $__MCP_obj, $__MCP_GUI_hWnd, $idListView, $hListView Global $hMainWin test() Exit Func test() $hMainWin = GUICreate("Test window", 120, 100, @DesktopWidth / 2, -1) GUICtrlCreateButton("Hwnd", 10, 10, 40, 20) GUICtrlSetOnEvent(-1, "handle_1stTEST_btn") GUICtrlCreateButton("ID", 50, 10, 40, 20) GUICtrlSetOnEvent(-1, "handle_2ndTEST_btn") GUISetOnEvent($GUI_EVENT_CLOSE, "_test_exit") GUISetState(@SW_SHOW) While (1) Sleep(17) WEnd EndFunc ;==>test Func _myColorPicker($obj) logmsg("+++: $obj = 0x" & Hex($obj) & @CRLF) Local $flags = 0 Local $ww, $wh, $x, $y, $w, $h $__MCP_obj = $obj $ww = 350 $wh = 500 $x = 200 $y = 150 $__MCP_GUI_hWnd = GUICreate("myColorPicker", $ww, $wh, $x, $y, $flags) $x = 10 $y = 10 $w = 150 $h = 20 GUICtrlCreateButton("Set caller's color", $x, $y, $w, $h) GUICtrlSetOnEvent(-1, "__MCP_handle_SetColor_btn") $y += $h + 5 $w = $ww - 25 $h = $wh - 100 $idListView = GUICtrlCreateListView("", $x, $y, $w, $h, -1, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT)) $hListView = GUICtrlGetHandle($idListView) $x = $ww / 2 - 50 $y = $wh - 60 $w = 100 $h = 25 GUICtrlCreateButton("Quit Popup", $x, $y, $w, $h) GUICtrlSetOnEvent(-1, "__MCP_handle_QUIT_btn") GUICtrlSetFont($idListView, 8.5, -1, -1, "courier new") _GUICtrlListView_AddColumn($idListView, "Name", 100) _GUICtrlListView_AddColumn($idListView, "Value", 100) _GUICtrlListView_AddColumn($idListView, "Sample", 100) _GUICtrlListView_SetColumnWidth($idListView, 0, 100) _GUICtrlListView_SetColumnWidth($idListView, 1, 80) logmsg("+++: $idListView = " & $idListView) logmsg("+++: $hListView = 0x" & Hex($hListView)) __MCP_populateListView($hListView) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") GUISetState(@SW_SHOW, $__MCP_GUI_hWnd) EndFunc ;==>_myColorPicker Func WM_NOTIFY($hWnd, $iMsg, $iwParam, $ilParam) #forceref $hWnd, $iMsg, $iwParam, $ilParam Local $hWndFrom, $iCode, $tNMHDR $tNMHDR = DllStructCreate($tagNMHDR, $ilParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hListView Switch $iCode Case $NM_CUSTOMDRAW Local $iDrawStage, $tCustDraw $tCustDraw = DllStructCreate($tagNMLVCUSTOMDRAW, $ilParam) $iDrawStage = DllStructGetData($tCustDraw, 'dwDrawStage') Switch $iDrawStage Case BitOR(0, $CDDS_ITEMPREPAINT) ;, $CDDS_SUBITEM) setItemColor($tCustDraw, $hWndFrom) Return $CDRF_NOTIFYSUBITEMDRAW EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func setItemColor($tCustDraw, $hWnd) Local $iIndex, $color, $iSubitem $iIndex = DllStructGetData($tCustDraw, 'dwItemSpec') ; item number $color = _GUICtrlListView_GetItemParam($hWnd, $iIndex) $iSubitem = DllStructGetData($tCustDraw, 'iSubItem') ; Here, I want to only change the color of the 3rd col, and not the 1st and 2nd cols DllStructSetData($tCustDraw, 'iSubItem', 2) ; always use the 3rd column (the 'sample' col) logmsg("+++: setItemColor($tCustDraw, 0x" & Hex($hWnd) & ") entered ... " _ & ", $iIndex = " & $iIndex & ", $iSubItem = " & $iSubitem & ", $color = " & Hex($color)) DllStructSetData($tCustDraw, 'clrText', $color) ; set the Text color DllStructSetData($tCustDraw, 'clrTextBk', bitnot($color)) ; set the background color EndFunc ;==>setItemColor Func logmsg($msg, $lnum = @ScriptLineNumber) ConsoleWrite("+++:" & $lnum & ": " & $msg & @CRLF) EndFunc ;==>logmsg Func __MCP_exit() GUIDelete($__MCP_GUI_hWnd) EndFunc ;==>__MCP_exit Func __MCP_handle_SetColor_btn() If (IsHWnd($__MCP_obj)) Then GUISetBkColor($COLOR_BLUE, $__MCP_obj) Else GUICtrlSetBkColor($__MCP_obj, $COLOR_BLUE) EndIf EndFunc ;==>__MCP_handle_SetColor_btn Func __MCP_populateListView($hWnd) Local $text, $parts, $iIndex Local Static $aItems[] = [ _ "BLACK | " & $CLR_BLACK & "|" & "", _ "BLUE | " & $CLR_BLUE & "|" & "", _ "RED | " & $CLR_RED & "|" & "", _ "WHITE | " & $CLR_WHITE & "|" & "", _ "YELLOW | " & $CLR_YELLOW & "|" & "" _ ] _GUICtrlListView_BeginUpdate($hWnd) _GUICtrlListView_DeleteAllItems($hWnd) For $ndx = 0 To UBound($aItems) - 1 $text = $aItems[$ndx] $parts = StringSplit($text, "|", 2) $parts[0] = StringStripWS($parts[0], 3) $parts[2] = StringStripWS($parts[2], 3) $iIndex = _GUICtrlListView_AddItem($hWnd, $parts[0], -1, $parts[1]) _GUICtrlListView_AddSubItem($hWnd, $iIndex, Hex($parts[1]), 1) _GUICtrlListView_AddSubItem($hWnd, $iIndex, $parts[0], 2) Next _GUICtrlListView_EndUpdate($hWnd) EndFunc ;==>__MCP_populateListView Func __MCP_handle_QUIT_btn() GUIDelete($__MCP_GUI_hWnd) EndFunc ;==>__MCP_handle_QUIT_btn Func handle_1stTEST_btn() _myColorPicker($hMainWin) EndFunc ;==>handle_1stTEST_btn Func handle_2ndTEST_btn() _myColorPicker(@GUI_CtrlId) EndFunc ;==>handle_2ndTEST_btn Func _test_exit() Exit EndFunc ;==>_test_exit  Link to comment Share on other sites More sharing options...
Danyfirex Posted August 14, 2017 Share Posted August 14, 2017 hello. Something like this should work...  expandcollapse popup#include <GUIConstantsEx.au3> #include <GuiImageList.au3> #include <GuiListView.au3> #include <WindowsConstants.au3> #include <GuiListView.au3> Global $oListView = 0 Example() Func Example() Local $hImage ; Create GUI GUICreate("ListView Add SubItem", 400, 300) $oListView = GUICtrlCreateListView("", 2, 2, 394, 268, -1, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES)) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") GUISetState(@SW_SHOW) ; Add columns _GUICtrlListView_InsertColumn($oListView, 0, "Column 1", 100) _GUICtrlListView_InsertColumn($oListView, 1, "Column 2", 100) _GUICtrlListView_InsertColumn($oListView, 2, "Column 3", 100) Local $aItems[] = [ _ "BLACK | " & $CLR_BLACK & "|" & "", _ "BLUE | " & $CLR_BLUE & "|" & "", _ "RED | " & $CLR_RED & "|" & "", _ "WHITE | " & $CLR_WHITE & "|" & "", _ "YELLOW | " & $CLR_YELLOW & "|" & "" _ ] _GUICtrlListView_BeginUpdate($oListView) _GUICtrlListView_DeleteAllItems($oListView) For $ndx = 0 To UBound($aItems) - 1 $text = $aItems[$ndx] $parts = StringSplit($text, "|", 2) $parts[0] = StringStripWS($parts[0], 3) $parts[2] = StringStripWS($parts[2], 3) $iIndex = _GUICtrlListView_AddItem($oListView, $parts[0], -1, $parts[1]) _GUICtrlListView_AddSubItem($oListView, $iIndex, Hex($parts[1]), 1) _GUICtrlListView_AddSubItem($oListView, $iIndex, $parts[0], 2) Next _GUICtrlListView_EndUpdate($oListView) ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>Example Func WM_NOTIFY($hWnd, $Msg, $wParam, $lParam) Local $tNMHDR, $hWndFrom, $iCode $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = DllStructGetData($tNMHDR, "hWndFrom") $iCode = DllStructGetData($tNMHDR, "Code") $g_hListView = GUICtrlGetHandle($oListView) Switch $hWndFrom Case $g_hListView Switch $iCode Case $NM_CUSTOMDRAW Local $tCustDraw = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) Local $iDrawStage = DllStructGetData($tCustDraw, "dwDrawStage") If $iDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If $iDrawStage = $CDDS_ITEMPREPAINT Then Return $CDRF_NOTIFYSUBITEMDRAW Local $iSubItem = DllStructGetData($tCustDraw, "iSubItem") Local $iItem = DllStructGetData($tCustDraw, "dwItemSpec") Local $iColor = $CLR_BLACK If $iSubItem = 2 Then $iColor = ("0x" & _GUICtrlListView_GetItemText($g_hListView, $iItem, 1)) Else $iColor = $CLR_BLACK EndIf DllStructSetData($tCustDraw, "clrText", $iColor) Return $CDRF_NEWFONT EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Saludos Skysnake 1  Danysys.com     AutoIt...  UDFs: VirusTotal API 2.0 UDF - libZPlay UDF - Apps: Guitar Tab Tester - VirusTotal Hash Checker Examples: Text-to-Speech ISpVoice Interface - Get installed applications - Enable/Disable Network connection  PrintHookProc - WINTRUST - Mute Microphone Level - Get Connected NetWorks - Create NetWork Connection ShortCut   Link to comment Share on other sites More sharing options...
AndyS19 Posted August 19, 2017 Author Share Posted August 19, 2017 Perfect! Â I was struggling with 'BugFix's rather extensive UDF code, but this addresses my issue exactly. Â Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now