I Have clicked on save as option to save a file, while doing that I need to rename a file appending with sysdate. I have searched in google find the below one line of code:
FileMove("C:\somefile.txt", "C:\somefile1.txt"), When I am trying to append with sysdate. It is not happening. Please help me out with the small issue.
I'm struggling to launch a VBS file via autoit using RunWait. Due to the nature of the deployment tool I am using for said script, I only know that the .vbs files will be in the same directory as my AutoIt-generated .exe, but not what that path will be. The path will look something like this:
This is generated during deployment and I have no way of predicting the path - therefore, I am not sure how to call back to "same directory" in order to successfully launch the .vbs.
This line is as close as I have gotten - this fires off the cmd window, but it closes immediately with out information, and the .vbs is not launched.
RunWait (@ComSpec & " /c" & 'cscript.exe WORKPLEASE.vbs ALL /Q /NoCancel') I thought /c might be the problem, but leaving out the /c element causes me not to even see the momentary CMD window flash by. Any help will be greatly appreciated, and thanks in advance.
Hope someone can help as quotes within quotes is always confusing. I am creating a silent install of printer software and want to call via runwait comspec line.
The call within a cmd line is below
samsung.exe /s /n"Samsung SL-M3220ND" /p"xxx"
xxx will be stored as a variable $PrinterIP which would be as example 10.10.10.20 I need to use a variable as i am doign this for a business and need it to be based on the store i install at that has a specific IP range.
I started with the below as 2 possibilities but no luck..
RunWait(@ComSpec & "/c " & "samsung.exe /s /n""Samsung SL-M3220ND"" /p""" & $PrinterIP ") RunWait(@ComSpec & "/c " & "samsung.exe /s /n'Samsung SL-M3220ND' /p'" & $PrinterIP '") but i cant get it to compile as i have errors on the line.. thanks in advance.
I've written several scripts with the following sequence:
Execute a program using Run w/stdout+stderr captured Typically processes all the files in one directory tree to populate a second tree Execute a second program (also with Run) to monitor the products of the first program and Display a progress bar (percentage of output files complete) Also monitor the first program's process and exit when it terminates The script then calls ProcessWaitClose (no timeout) on the first program's process and Checks the first program's results Kills the monitor program if it hasn't already exited on its own. Sometimes, ProcessWaitClose returns 1 with @error = 0 and @extended = 0xCCCCCCCC (actually, 0xFFFFFFFFCCCCCCCC), which seems ambiguous: the documentation says that @error = non-zero and @extended = 0xCC... means an invalid PID (unclear what the return value is), and 1 is returned for non-existent processes (but no mention of @extended). The 1/0/0xCC... result seems to occur when the first program exits very quickly (with or without an error). Since the exit value is not available, the script scans the program's output and tries to determine whether it ran successfully. This has gotten complicated and unreliable.
I've now implemented a much simpler approach that works for most cases:
Modify the monitor program so that it ignores the other program's process (the monitor always gets killed by the script anyway) Execute the monitor program first using Run, then execute the processing program with RunWait When RunWait returns, the child process exit value is available, so the script can ignore its output (which isn't available anyway) If the monitor program is still running, kill it. Remaining Issue
However, there are still a couple of cases where it's necessary to get both the exit value from the processing program and its output. Since RunWait doesn't capture stdout and stderr for the parent script, it's looking like I'll have to call RunWait and redirect the 2 streams to a temp file and then scan it. Also, to do the redirect, I think I'll have to use @ComSpec to execute the processing program, which adds an undesired layer.
Does anybody have a better (cleaner) way to handle these cases?
I'm too stupid to see my mistake:
To investigate the internal "dictionary" of TIFF files I'd like to read in the files in binary mode and to check, if there are more than one pages "in" this TIFF.
Notepad++, "View as Hex" is presenting the first bytes as "49 49 2a 20 08 20 20 20 12" for the TIF attached to this posting
The "TIFF Header Format" is easy:
Offset 00h, 2 Byte = Byte Order, "II"=intel, "MM"=motorola. (I = 0x49)
Offset 02h, 2 Byte = Version Nr.
Offset 04h, 4 Byte = pointer to first IFD entry
Description of TIFF header: https://www.awaresystems.be/imaging/tiff/faq.html#q3
Howto read and analyse the binary content correctly? This is my messy, not operational code:
$sampleTiff="H:\daten\tif\11\11\111111.TIF" $h=FileOpen($sampleTiff,16) $content=FileRead($h) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $content = ' & $content & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console FileClose($h) $type=VarGetType($content) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $type = ' & $type & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console $ToString=BinaryToString($content) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $ToString = ' & $ToString & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console ConsoleWrite(@CRLF & @CRLF) $content=StringTrimLeft($content,2) ; cut off the leading "0x" ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $content = ' & $content & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console for $i = 1 to 8 step 8 $next=StringMid($content,$i,2) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $next = ' & $next & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console $Chr=BinaryToString($next) ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $Chr = ' & $Chr & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console ConsoleWrite(@CRLF & "---" & @CRLF) Next Regards, Rudi.