Jump to content

Issues with WS_EX_ACCEPTFILES and GUI_DROPACCEPTED


Recommended Posts

Hi all,

I've been looking around the forum and testing different ways of getting a 'drop zone' to work in my script, but I can't seem to get any response from the event listener. Code compiles perfectly. Chaning the control from a label to an input- or edit-field doesn't change its behaviour, still no response when a file is dropped on there...

It might just be that I am overlooking a simple detail, so I'm hoping for an extra pair of eyes here or there who can spot why this isn't working as it should. 

I have another 3500+ lines script where I have basically the same bit of code, and it seems to work in there without problems.

So, here it goes:

Global $DD_GUI = GUICreate("DicomDrop",200,200,-1,-1,BitOR($WS_SYSMENU,$WS_POPUP),$WS_EX_ACCEPTFILES)
GUISetBkColor(0x030303,$DD_GUI)

$DD_GUI_DRAGLABEL = GUICtrlCreateLabel("",0,0,32,32,-1, $GUI_WS_EX_PARENTDRAG)
$DD_GUI_DRAGIMAGE = GUICtrlCreateIcon(@ScriptFullPath,201,0,0,32,32)

$DD_GUI_TITLELABEL = GUICtrlCreateLabel("DicomDrop",50,10,100,20,$SS_CENTER)
GUICtrlSetFont($DD_GUI_TITLELABEL,8,$FW_SEMIBOLD,$GUI_FONTNORMAL,"Verdana")
GUICtrlSetColor($DD_GUI_TITLELABEL,0xFFFFFF)

$DD_GUI_CLOSE = GUICtrlCreateButton("X",174,4,24,24,$BS_FLAT)
GUICtrlSetBkColor($DD_GUI_CLOSE,0x030303)
GUICtrlSetColor($DD_GUI_CLOSE,0xFFFFFF)

Global $DD_GUI_DROPZONE = GUICtrlCreateLabel("",10,42,180,148)
GUICtrlSetState(-1,8)
GUICtrlSetBkColor($DD_GUI_DROPZONE,0x181818)

GUISetState(@SW_SHOW,$DD_GUI)

Local $DD_MSG = 0
While 1
    $DD_MSG = GUIGetMsg()
    Select
        Case $DD_MSG = $GUI_EVENT_CLOSE
            ConsoleWrite(@CRLF & "Debug -- Closed by GUI_EVENT_CLOSE")
            DD_EXIT()
        Case $DD_MSG = $GUI_EVENT_DROPPED
                If @GUI_DropId = $DD_GUI_DROPZONE Then
                    Local $DroppedFile = @GUI_DragFile
                    GUIDelete()
                    ConsoleWrite(@CRLF & "Debug -- Dropped file : " & $DroppedFile)
                EndIf
        Case $DD_MSG = $DD_GUI_CLOSE
            ConsoleWrite(@CRLF & "Debug -- Closed by DD_GUI_CLOSEIMAGE")
            DD_EXIT()
    EndSelect
WEnd

Func DD_EXIT()
    GUIDelete($DD_GUI)
    Exit
EndFunc

If anyone has any idea whatsoever, please let me know 🙂

Thanks in advance and kind regards,

Jan

Link to post
Share on other sites
  • Moderators

jantograaf,

Your script as posted runs (when the required includes are added) without problem for me - I get the dropped filename written to the console for every drop.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

Hi @Melba23,

Thanks for the quick reply! 🙂 

This was the scenario I was afraid of (since my code seemed correct). So, just to be 'complete', I have included all the includes I'm using right now. Overkill, I know, but I included all includes from the other script as the drop zone works in that one...

#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_Outfile=DicomDrop.exe
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_UseUpx=y
#AutoIt3Wrapper_Res_Icon_Add=drag.ico,201
#AutoIt3Wrapper_Res_Icon_Add=close.ico,202
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiIPAddress.au3>
#include <StaticConstants.au3>
#include <TabConstants.au3>
#include <WindowsConstants.au3>
#include <Constants.au3>
#include <MsgBoxConstants.au3>
#include <GuiEdit.au3>
#include <WinAPIProc.au3>
#include <WinAPISys.au3>
#include <Array.au3>
#include <FontConstants.au3>
#include <AutoItConstants.au3>
#include <ColorConstants.au3>
#include <InetConstants.au3>
#include "WinHttp.au3"
#include <Network.au3>
#include <StringConstants.au3>
#include <File.au3>
#include <Misc.au3>
#include <GuiComboBox.au3>
#include <GUIComboBoxEx.au3>
#include <FileConstants.au3>
#include <GUIListView.au3>
#include <GUITab.au3>
#include <GUIListBox.au3>
#include <GuiButton.au3>
#include <XML.au3>
#include <SliderConstants.au3>
#include <json.au3>

Anything obvious missing as far as you can see?

Kind regards,

Jan

Link to post
Share on other sites
1 minute ago, Nine said:

Shouldn't you exit after GUIDelete ?

Haha, I missed that line, since it came from the other program (where the drop zone does work). But actually that GuiDelete() should be erased there and will be replaced by the call to the function that will process the dropped file. Thanks anyway 😉 

Link to post
Share on other sites

So, meanwhile, I've tested it here on multiple PC's, and it seems to work on some and not work on others. All of them are Windows 10 x64 however, and they should be configured basically in the same way. Could it be that it has something to do with usernames/permissions? I'm completely baffled right now, this should work without a problem and it doesn't. 😪

Link to post
Share on other sites
  • Moderators

jantograaf,

My machine is also Win10 x64 and as I said earlier, the script ran perfectly for me.

But searching for "Win10 drag and drop problem" shows that this a relatively common event, possibly linked to Explorer becoming corrupted during Windows updates.  Various sites listed propose fixes - none of those I investigated appear to be likely to damage your machine or your data - so it might be worth trying some of them and seeing if you can resolve your problem. Please let us know if you do find a solution.

M23

Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Link to post
Share on other sites

The script works fine

Global $DD_GUI = GUICreate("DicomDrop",200,200,-1,-1,0x00CF0000,0x00000018)
GUISetBkColor(0x030303,$DD_GUI)
$DD_GUI_DRAGLABEL = GUICtrlCreateLabel("",0,0,32,32,-1, 0x00100000)
$DD_GUI_DRAGIMAGE = GUICtrlCreateIcon(@ScriptFullPath,201,0,0,32,32)
$DD_GUI_TITLELABEL = GUICtrlCreateLabel("DicomDrop",50,10,100,20,0x1)
GUICtrlSetFont($DD_GUI_TITLELABEL,8,600,0,"Verdana")
GUICtrlSetColor($DD_GUI_TITLELABEL,0xFFFFFF)
$DD_GUI_CLOSE = GUICtrlCreateButton("X",174,4,24,24,0x8000)
GUICtrlSetBkColor($DD_GUI_CLOSE,0x030303)
GUICtrlSetColor($DD_GUI_CLOSE,0xFFFFFF)
Global $DD_GUI_DROPZONE = GUICtrlCreateLabel("",10,42,180,148)
GUICtrlSetState(-1,8)
GUICtrlSetBkColor($DD_GUI_DROPZONE,0xC8C9D2)
GUISetState(@SW_SHOW)
Local $DD_MSG = 0
While 1
$DD_MSG = GUIGetMsg()
Select
Case $DD_MSG = -3
ConsoleWrite(@CRLF & "Debug -- Closed by GUI_EVENT_CLOSE")
DD_EXIT()
Case $DD_MSG = -13
If @GUI_DropId = $DD_GUI_DROPZONE Then
Local $DroppedFile = @GUI_DragFile
GUICtrlSetData($DD_GUI_DROPZONE,$DroppedFile)
MsgBox(262144, '', $DroppedFile & @CR & '' & @CR & '' & @CR & '')
;GUIDelete()
ConsoleWrite(@CRLF & "Debug -- Dropped file : " & $DroppedFile)
EndIf
Case $DD_MSG = $DD_GUI_CLOSE
ConsoleWrite(@CRLF & "Debug -- Closed by DD_GUI_CLOSEIMAGE")
DD_EXIT()
EndSelect
WEnd
Func DD_EXIT()
GUIDelete($DD_GUI)
Exit
EndFunc

 

Link to post
Share on other sites

Every time I had a drag/drop problem it came from elevation issues. 

If the GUI was running as admin and the explorer process was not then it would not have enough permissions to drag a file.

If it is working on some machines and not others I wonder if it may be a UAC setting or some other process creating a difference in the rights.

 

You can go so far as to run the GUI as admin, and manually run a file explorer process as admin and it will work, but when they are mixed it creates issues. 

Link to post
Share on other sites
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By XGamerGuide
      I'm trying to assign a faint text in the background to an input field that disappears after the input has started. This should have a certain color such as gray.
    • By Bruceway
      Hi All, 
      I am trying to mark out the middle square of this Magnify Routine "window on right" (stolen from M23 - Thanks) - I assume the DllCall is overwriting the boxes. But wherever I try and redraw, they won't stay on the Magnify Window. Can anyone advise, bet way to keep boxes around the middle square.
      Please be kind with my code, it is ripped from a MUCH bigger exe.
      The "half" transparent window, is for dragging to where you want it, and the buttons are for more precise placement.
      #include <WindowsConstants.au3> #include <StaticConstants.au3> #include <GUIConstantsEx.au3> #include <WinAPI.au3> Global $hMag_GUI, $hMagDC, $hDeskDC, $hPen, $oObj, $aWinPos[2], $iLast_Mouse_X = 0, $iLast_Mouse_Y = 0 Global $pWindowCaptureX, $pWindowCaptureY Global $pWindowMagWinX, $pWindowMagWinY #Region - GUI3 ; *** Grabber/Picker Window Global $hGUI3 = GUICreate("Capture", 150, 150, $pWindowCaptureX, $pWindowCaptureY, $WS_EX_TOOLWINDOW) Global $Pic1 = GUICtrlCreatePic("", 70, 40, 10, 10, BitOR($GUI_SS_DEFAULT_PIC,$WS_BORDER)) Global $hButtonUp = GUICtrlCreateButton("U", 65, 60, 20, 20) Global $hButtonDown = GUICtrlCreateButton("D", 65, 100, 20, 20) Global $hButtonLeft = GUICtrlCreateButton("L", 40, 80, 20, 20) Global $hButtonRight = GUICtrlCreateButton("R", 90, 80, 20, 20) Global $hButtonOK = GUICtrlCreateButton("OK", 60, 80, 30, 20) #EndRegion - GUI3 #Region - GUI4 Global $hGUI4 = GUICreate("MagWin", 250, 250, 325, 195) Global $hButtonMOK = GUICtrlCreateButton("OK", 45, 140, 30, 20) Global $hButtonMUp = GUICtrlCreateButton("U", 50, 120, 20, 20) Global $hButtonMDown = GUICtrlCreateButton("D", 50, 160, 20, 20) Global $hButtonMLeft = GUICtrlCreateButton("L", 25, 140, 20, 20) Global $hButtonMRight = GUICtrlCreateButton("R", 75, 140, 20, 20) Global $hLabelWindow = GUICtrlCreateLabel("Window", 5, 185, 44, 15) Global $hLabelWindowText = GUICtrlCreateLabel("", 60, 185, 176, 15) Global $hLabelCheck = GUICtrlCreateLabel("Check", 5, 205, 44, 15) Global $hLabelCheckText = GUICtrlCreateLabel("", 60, 205, 176, 15) Global $hLabelScreen = GUICtrlCreateLabel("Screen", 5, 225, 44, 15) Global $hLabelScreenText = GUICtrlCreateLabel("", 60, 225, 176, 15) #EndRegion - GUI4 ;GUISetState(@SW_HIDE, $hGUI1) GUISetState(@SW_SHOW, $hGUI3) GUISetState(@SW_SHOW, $hGUI4) WinSetTrans($hGUI3, "", 100) $hMag_GUI = WinGetHandle("MagWin") ; Get device context for Mag GUI $hMagDC = _WinAPI_GetDC($hMag_GUI) If @error Then Exit ; Get device context for desktop $hDeskDC = _WinAPI_GetDC(0) If @error Then _WinAPI_ReleaseDC($hMag_GUI, $hMagDC) Exit EndIf ; Create pen $hPen = _WinAPI_CreatePen($PS_SOLID, 5, 0x7E7E7E) $oObj = _WinAPI_SelectObject($hMagDC, $hPen) ; Loop until the user exits. ; *** Static Window While 1 ; Reset position Local $aWinPos = WinGetPos("Capture") If $aWinPos[0] <> $iLast_Mouse_X Or $aWinPos[1] <> $iLast_Mouse_Y Then ; Redraw Mag GUI _FOEA_Loupe($aWinPos) ;~ Local $TWPx = $aWinPos[0]+81 ;+81 Top Left Corner; +85 Middle ;~ Local $TWPy = $aWinPos[1]+75 ;+75 Top Left Corner; +80 Middle ;~ ;*** WINDOW COORDS = x+81 & y+75 (top left of picker square) GUISetState(@SW_HIDE, $hGUI3) Local $output1 = PixelCheckSum($aWinPos[0]+81, $aWinPos[1]+75, $aWinPos[0]+91, $aWinPos[1]+85) Local $output2 = PixelCheckSum($aWinPos[0]+73, $aWinPos[1]+66, $aWinPos[0]+83, $aWinPos[1]+76) If $aWinPos[0] < 1440 Then GUICtrlSetData($hLabelWindowText, $aWinPos[0]+81 & "(" & $aWinPos[0]+81+1440 &")," & $aWinPos[1]+75 & " : " & $output1) GUICtrlSetData($hLabelCheckText, $aWinPos[0]+73 & "(" & $aWinPos[0]+73+1440 & ")," & $aWinPos[1]+66 & " : " & $output2) GUICtrlSetData($hLabelScreenText, "W: " & $aWinPos[0]+73 & "(" & $aWinPos[0]+73+1440 &")," & $aWinPos[1]+66 & " C: " & $aWinPos[0]+81 & "," & $aWinPos[1]+75) Else GUICtrlSetData($hLabelWindowText, $aWinPos[0]+81-1440 & "(" & $aWinPos[0]+81 &")," & $aWinPos[1]+75 & " : " & $output1) GUICtrlSetData($hLabelCheckText, $aWinPos[0]+89-1440 & "(" & $aWinPos[0]+89 &")," & $aWinPos[1]+84 & " : " & $output2) GUICtrlSetData($hLabelScreenText, "W: " & $aWinPos[0]+73-1440 & "(" & $aWinPos[0]+73 & ")," & $aWinPos[1]+66 & " C: " & $aWinPos[0]+81 & "," & $aWinPos[1]+75) ;GUICtrlSetData($hLabel2, $aWinPos[1]+75) EndIf GUISetState(@SW_SHOW, $hGUI3) $iLast_Mouse_X = $aWinPos[0] $iLast_Mouse_Y = $aWinPos[1] $pWindowCaptureX = $aWinPos[0] $pWindowCaptureY = $aWinPos[1] ; *** Box ; Tried it here - doesn't work ;~ Global $Graphic = GUICtrlCreateGraphic(176, 55, 2, 20) ;~ Global $Graphic = GUICtrlCreateGraphic(194, 55, 2, 20) ;~ Global $Graphic = GUICtrlCreateGraphic(176, 55, 20, 2) ;~ Global $Graphic = GUICtrlCreateGraphic(176, 73, 20, 2) ;~ Global $Graphic = GUICtrlCreateGraphic(0, 0, 1, 1) EndIf Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Local $aWinPos = WinGetPos("MagWin") $pWindowMagWinX = $aWinPos[0] $pWindowMagWinY = $aWinPos[1] ;GUISetState(@SW_HIDE, $hGUI3) GUIDelete($hGUI3) ; Clear up Mag GUI _WinAPI_SelectObject($hMagDC, $oObj) _WinAPI_DeleteObject($hPen) _WinAPI_ReleaseDC(0, $hDeskDC) _WinAPI_ReleaseDC($hMag_GUI, $hMagDC) ;GUISetState(@SW_HIDE, $hMag_G GUIDelete($hGUI4) GUIDelete($hMag_GUI) ExitLoop Case $hButtonMOK GUISetState(@SW_HIDE, $hGUI3) Local $aWinPos = WinGetPos("Capture") Local $TWPx = $aWinPos[0]+81 ;+81 Top Left Corner; +85 Middle Local $TWPy = $aWinPos[1]+75 ;+75 Top Left Corner; +80 Middle ;*** WINDOW COORDS = x+81 & y+75 (top left of picker square) If $aWinPos[0] > 1440 Then $aWinPos[0] = $aWinPos[0]-1440 $TWPx = $TWPx-1440 EndIf Local $output0 = PixelCheckSum($TWPx-8, $TWPy-9, $TWPx-8+10, $TWPy+1) ;_FOEA_WinAPI_DrawRect(LRChecksum($TWPx-8), $TWPy-9, LRChecksum($TWPx-8)+10, $TWPy+1, 0xFFFFFF, 50) MsgBox($MB_SYSTEMMODAL, "Results ", _ "Window Coords" & @CRLF & _ $TWPx & "(" & $TWPx+1440 & "), " & $TWPy & @CRLF & _ "Checksum0: " & $output0 & @CRLF) GUISetState(@SW_SHOW, $hGUI3) WinActivate($hGUI3, "Capture") Case $hButtonMUp _FOEA_ButtonMUp() Case $hButtonMDown _FOEA_ButtonMDown() Case $hButtonMRight _FOEA_ButtonMRight() Case $hButtonMLeft _FOEA_ButtonMLeft() EndSwitch WEnd Func _FOEA_Loupe($aWinPos) Local $iX, $iY DllCall("gdi32.dll", "int", "StretchBlt", _ "int", $hMagDC, "int", 10, "int", 10, "int", 110, "int", 110, _ "int", $hDeskDC, "int", $aWinPos[0]+68, "int", $aWinPos[1]+61, "int", 20, "int", 20, _ "long", $SRCCOPY) DllCall("gdi32.dll", "int", "StretchBlt", _ "int", $hMagDC, "int", 130, "int", 10, "int", 110, "int", 110, _ "int", $hDeskDC, "int", $aWinPos[0]+70, "int", $aWinPos[1]+63, "int", 7, "int", 7, _ "long", $SRCCOPY) ; Appears initially - then disappears... Global $Graph1 = GUICtrlCreateGraphic(170, 57, 8, 16, $SS_WHITERECT) Global $Graph2 = GUICtrlCreateGraphic(170, 73, 31, 8, $SS_WHITERECT) Global $Graph3 = GUICtrlCreateGraphic(193, 57, 8, 16, $SS_WHITERECT) Global $Graph4 = GUICtrlCreateGraphic(170, 49, 31, 8, $SS_WHITERECT) ; This apears to be needed to stop the Magnify window moving Global $Graph5 = GUICtrlCreateGraphic(0, 0, 1, 1) ;Tried this too - no difference GUISetState(@SW_SHOW, $Graph1) GUISetState(@SW_SHOW, $Graph2) GUISetState(@SW_SHOW, $Graph3) GUISetState(@SW_SHOW, $Graph4) EndFunc ;==>Loupe Func _FOEA_ButtonMUp() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0], $aWinPos[1]-1) EndFunc Func _FOEA_ButtonMDown() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0], $aWinPos[1]+1) EndFunc Func _FOEA_ButtonMRight() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0]+1, $aWinPos[1]) EndFunc Func _FOEA_ButtonMLeft() Local $aWinPos = WinGetPos("Capture") WinMove($hGUI3, "Capture", $aWinPos[0]-1, $aWinPos[1]) EndFunc  
    • By XGamerGuide
      I'm trying to display a GIF. However, the GUI should not be visible. Here is an attempt that doesn't work:
      $sGIF = "MyGIF.gif" #Include <IE.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <WINAPI.au3> #include <SendMessage.au3> Global Const $SC_DRAGMOVE = 0xF012 HotKeySet("{ESC}", "_Exit") $hGui = GUICreate("Test", 400, 300, -1, -1, $WS_POPUP, $WS_EX_LAYERED) GUISetBkColor(0xABCDEF) $oIE = _IECreateEmbedded() GUICtrlCreateObj($oIE, 10, 10, 380, 280) _WinAPI_SetLayeredWindowAttributes($hGUI, 0xABCDEF, 250) _IENavigate($oIE, $sGIF) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_PRIMARYDOWN _SendMessage($hGUI, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndSwitch WEnd Func _Exit() Exit  
    • By kcvinu
      Hi all,
      I am creating a GUI library in Nim with win32 API functions. Even though the syntax is similar to Python, coding is almost similar to C in Nim. 
      I can change the back color of the button in NM_CUSTOMDRAW. But I can't change the button text color. here is my pseudo code.  
      proc setBtnBackColor*(me : Button, lp: LPNMCUSTOMDRAW ) = if lp.uItemState and CDIS_SELECTED : #------------------ btn clicked # Here i am changing the button color with SelectObject & FillRect. elif lp.uItemState and CDIS_HOT : # ----------------Mouse over # Here i am changing the button's mouse hover color with SelectObject & FillRect. else: # -------------------------Default color set # Here i am changing the button's default color with SelectObject & FillRect. # Here i tried---> SetTextColor(lp.hdc, RGB(102, 255, 51) ) #------- But no luck. #------------------------------------------------------------------------- Please guide me. What i am doing wrong here ?  I am returning "CDRF_SKIPDEFAULT" after calling this function.
      Note : I am using subclassed button. So when the parent window receives WM_NOTIFY message, it sends that to my button's WndProc. There i am handling the message.
    • By paw
      I use SetSoundDevice to control my audio devices but the UI was either
       
      blurry like this:
      or unusable like this:

      so I made this horrible thing to add scaling to the GUI:
      #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Change2CUI=y #AutoIt3Wrapper_Res_HiDpi=y #AutoIt3Wrapper_AU3Check_Parameters=-w 3 -w 4 -w 5 #AutoIt3Wrapper_Run_Au3Stripper=y #Au3Stripper_Parameters=/sf /sv /rm #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** #include <File.au3> ;~ _convertGUI("") If $CmdLine[0] <> 0 Then _convertGUI($CmdLine[1]) Func _convertGUI($sFilePath) If $sFilePath <> "" Then Local $aArray = FileReadToArray($sFilePath) Else ;TEST DATA Local $aArray[6] = ['$H_Res_Language = GUICtrlCreateProgress(5, 120, 210 + 25, 480, 20, BitOR($GUI_SS_DEFAULT_COMBO, $CBS_SIMPLE)) ; $CBS_DROPDOWNLIST)', _ 'Local $h_Ok = GUICtrlCreateButton("Ok", 72, 224, 81, 33, 0)', _ 'GUICreate($Warning_TiTle, 700, 310, -1, -1, $WS_SIZEBOX + $WS_SYSMENU + $WS_MINIMIZEBOX)', _ 'GUICtrlCreateLabel("Output type: ", 30, 130, 65, 20) ;, $SS_RIGHT)', _ '$H_FieldNameEdit = GUICtrlCreateEdit($INP_FieldNameEdit, 100,260+25, 500, 150 - 25) ;comment', 'Local $H_CANCEL = GUICtrlCreateGraphic("Cancel", 224, 224, 97, 33, 0)'] EndIf Local $hTimer = TimerInit(), $iGUIElementCount = 0, $sResult = "", $sFileName = "", $sDrive = "", $sDir = "", $sExtension = "" If @Compiled Then _PathSplit($sFilePath, $sDrive, $sDir, $sFileName, $sExtension) $sFileName = StringRegExpReplace($sFilePath, "^.*\\", "") EndIf For $i = 0 To (UBound($aArray) - 1) If StringRegExp($aArray[$i], "GUICtrlCreate|GUICreate") Then $sResult = _splitComma($aArray[$i]) If Not @error Then $aArray[$i] = $sResult $iGUIElementCount += 1 EndIf Next ConsoleWrite("t = " & TimerDiff($hTimer) & " GUI elements = " & $iGUIElementCount & " lines = " & (UBound($aArray) - 1) & @CRLF) If $sFileName <> "" Then Local $hFile = FileOpen("edited." & $sFileName, 2) _FileWriteFromArray("edited." & $sFileName, $aArray) FileClose($hFile) EndIf Exit EndFunc ;==>_convertGUI Func _splitComma($sString) Local $sSplitResult = "", $sTrimmedR = "", $sTrimmedL = "" Local $aSplit = StringSplit($sString, ',') If Not @error Then $sTrimmedR = "" $sTrimmedL = "" For $j = 1 To $aSplit[0] If StringRegExp($aSplit[1], "(?:.GUICtrlCreateGraphic|GUICtrlCreateProgress|GUICtrlCreateSlider|GUICtrlCreateTab|GUICtrlCreateTreeView)") Then If $j = 1 Then While StringLeft($aSplit[$j], 1) <> '(' $sTrimmedL &= StringLeft($aSplit[$j], 1) $aSplit[$j] = StringTrimLeft($aSplit[$j], 1) WEnd $aSplit[$j] = StringTrimLeft($aSplit[$j], 1) EndIf EndIf If $j = $aSplit[0] Then While StringRight($aSplit[$j], 1) <> ')' $sTrimmedR &= StringRight($aSplit[$j], 1) $aSplit[$j] = StringTrimRight($aSplit[$j], 1) WEnd $aSplit[$j] = StringTrimRight($aSplit[$j], 1) EndIf If StringRegExp($aSplit[$j], "[0-9]") And $aSplit[$j] <> -1 And $aSplit[$j] <> 0 And $aSplit[$j] <> 1 And Not StringInStr($aSplit[$j], ')') Then If StringRegExp($aSplit[$j], "\-|\+") Then ;put parenthesis around + or - $aSplit[$j] = '(' & $aSplit[$j] & ")*$g_DPI" Else $aSplit[$j] = $aSplit[$j] & "*$g_DPI" EndIf EndIf If $j < $aSplit[0] Then $sSplitResult &= $aSplit[$j] & ',' ElseIf $j = $aSplit[0] Then $sSplitResult &= $aSplit[$j] & ')' Else $sSplitResult &= $aSplit[$j] EndIf Next If $sTrimmedR <> "" Then $sSplitResult &= StringReverse($sTrimmedR) If $sTrimmedL <> "" Then $sSplitResult = $sTrimmedL & '(' & $sSplitResult Else SetError(1) Return EndIf ConsoleWrite($sSplitResult & @CRLF) Return $sSplitResult EndFunc ;==>_splitComma
      And now it looks good: 
      but it doesn't work on everything, for example the "GUICtrlCreateLabel("Output type: ", 30, 130, 65, 20) ;, $SS_RIGHT)" (from the autoit3wrapper gui)
      because the comment contains a parenthesis and it would break completely if there were variables as parameters..
      Is there some kind of parser around that I could use instead or maybe someone who has already done something like this?
×
×
  • Create New...