careca Posted June 1, 2020 Share Posted June 1, 2020 Hi all, im looking for a way to edit subitems and what happens is only the subitem 0 is editable. This is the example from the help file for _GUICtrlListView_GetEditControl expandcollapse popup#include <GUIConstantsEx.au3> #include <GuiImageList.au3> #include <GuiListView.au3> #include <WindowsConstants.au3> Global $g_hListView, $g_idMemo Example() Func Example() Local $hGui, $hImage $hGui = GUICreate("ListView Get Edit Control", 400, 300, Default, Default, Default, $WS_EX_CLIENTEDGE) $g_hListView = _GUICtrlListView_Create($hGui, "", 2, 2, 394, 118, BitOR($LVS_EDITLABELS, $LVS_REPORT)) $g_idMemo = GUICtrlCreateEdit("", 2, 124, 396, 174, 0) _GUICtrlListView_SetExtendedListViewStyle($g_hListView, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_DOUBLEBUFFER)) GUISetState(@SW_SHOW) ; Load images $hImage = _GUIImageList_Create() _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap(GUICtrlGetHandle($g_hListView), 0xFF0000, 16, 16)) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap(GUICtrlGetHandle($g_hListView), 0x00FF00, 16, 16)) _GUIImageList_Add($hImage, _GUICtrlListView_CreateSolidBitMap(GUICtrlGetHandle($g_hListView), 0x0000FF, 16, 16)) _GUICtrlListView_SetImageList($g_hListView, $hImage, 1) ; Add columns _GUICtrlListView_AddColumn($g_hListView, "Column 1", 100) _GUICtrlListView_AddColumn($g_hListView, "Column 2", 100) _GUICtrlListView_AddColumn($g_hListView, "Column 3", 100) ; Add items _GUICtrlListView_AddItem($g_hListView, "Row 1: Col 1", 0) _GUICtrlListView_AddSubItem($g_hListView, 0, "Row 1: Col 2", 1) _GUICtrlListView_AddSubItem($g_hListView, 0, "Row 1: Col 3", 2) _GUICtrlListView_AddItem($g_hListView, "Row 2: Col 1", 1) _GUICtrlListView_AddSubItem($g_hListView, 1, "Row 2: Col 2", 1) _GUICtrlListView_AddItem($g_hListView, "Row 3: Col 1", 2) ; Monitor the WM_NOTIFY message. GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") _GUICtrlListView_EditLabel($g_hListView, 0) MemoWrite("Edit Handle: 0x" & Hex(_GUICtrlListView_GetEditControl($g_hListView)) & _ " IsPtr = " & IsPtr(_GUICtrlListView_GetEditControl($g_hListView)) & " IsHWnd = " & IsHWnd(_GUICtrlListView_GetEditControl($g_hListView))) ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>Example Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $tInfo, $hWndListView = $g_hListView If Not IsHWnd($g_hListView) Then $hWndListView = GUICtrlGetHandle($g_hListView) $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iIDFrom = DllStructGetData($tNMHDR, "IDFrom") $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hWndListView Switch $iCode Case $LVN_BEGINLABELEDITA, $LVN_BEGINLABELEDITW ; Start of label editing for an item $tInfo = DllStructCreate($tagNMLVDISPINFO, $lParam) _DebugPrint("$LVN_BEGINLABELEDIT" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Mask:" & @TAB & DllStructGetData($tInfo, "Mask") & @CRLF & _ "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->State:" & @TAB & DllStructGetData($tInfo, "State") & @CRLF & _ "-->StateMask:" & @TAB & DllStructGetData($tInfo, "StateMask") & @CRLF & _ "-->Image:" & @TAB & DllStructGetData($tInfo, "Image") & @CRLF & _ "-->Param:" & @TAB & DllStructGetData($tInfo, "Param") & @CRLF & _ "-->Indent:" & @TAB & DllStructGetData($tInfo, "Indent") & @CRLF & _ "-->GroupID:" & @TAB & DllStructGetData($tInfo, "GroupID") & @CRLF & _ "-->Columns:" & @TAB & DllStructGetData($tInfo, "Columns") & @CRLF & _ "-->pColumns:" & @TAB & DllStructGetData($tInfo, "pColumns")) Return False ; Allow the user to edit the label ; ;Return True ; Prevent the user from editing the label Case $LVN_COLUMNCLICK ; A column was clicked $tInfo = DllStructCreate($tagNMLISTVIEW, $lParam) _DebugPrint("$LVN_COLUMNCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _ "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _ "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _ "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _ "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _ "-->Param:" & @TAB & DllStructGetData($tInfo, "Param")) ; No return value Case $LVN_ENDLABELEDITA, $LVN_ENDLABELEDITW ; The end of label editing for an item $tInfo = DllStructCreate($tagNMLVDISPINFO, $lParam) If (DllStructGetData($tInfo, "Text") <> 0) Then Local $tBuffer = DllStructCreate("char Text[" & DllStructGetData($tInfo, "TextMax") & "]", DllStructGetData($tInfo, "Text")) _DebugPrint("$LVN_ENDLABELEDIT" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Mask:" & @TAB & DllStructGetData($tInfo, "Mask") & @CRLF & _ "-->Item:" & @TAB & DllStructGetData($tInfo, "Item") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->State:" & @TAB & DllStructGetData($tInfo, "State") & @CRLF & _ "-->StateMask:" & @TAB & DllStructGetData($tInfo, "StateMask") & @CRLF & _ "-->Text:" & @TAB & DllStructGetData($tBuffer, "Text") & @CRLF & _ "-->TextMax:" & @TAB & DllStructGetData($tInfo, "TextMax") & @CRLF & _ "-->Image:" & @TAB & DllStructGetData($tInfo, "Image") & @CRLF & _ "-->Param:" & @TAB & DllStructGetData($tInfo, "Param") & @CRLF & _ "-->Indent:" & @TAB & DllStructGetData($tInfo, "Indent") & @CRLF & _ "-->GroupID:" & @TAB & DllStructGetData($tInfo, "GroupID") & @CRLF & _ "-->Columns:" & @TAB & DllStructGetData($tInfo, "Columns") & @CRLF & _ "-->pColumns:" & @TAB & DllStructGetData($tInfo, "pColumns")) Return True ; If Text is empty the return value is ignored EndIf Case $NM_CLICK ; Sent by a list-view control when the user clicks an item with the left mouse button $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) _DebugPrint("$NM_CLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _ "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _ "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _ "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _ "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _ "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _ "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags")) ; No return value Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _ "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _ "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _ "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _ "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _ "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _ "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags")) ; No return value Case $NM_KILLFOCUS ; The control has lost the input focus _DebugPrint("$NM_KILLFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode) ; No return value Case $NM_RCLICK ; Sent by a list-view control when the user clicks an item with the right mouse button $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) _DebugPrint("$NM_RCLICK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _ "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _ "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _ "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _ "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _ "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _ "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags")) ;Return 1 ; not to allow the default processing Return 0 ; allow the default processing Case $NM_RDBLCLK ; Sent by a list-view control when the user double-clicks an item with the right mouse button $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) _DebugPrint("$NM_RDBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _ "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _ "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _ "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _ "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _ "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _ "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags")) ; No return value Case $NM_RETURN ; The control has the input focus and that the user has pressed the ENTER key _DebugPrint("$NM_RETURN" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode) ; No return value Case $NM_SETFOCUS ; The control has received the input focus _DebugPrint("$NM_SETFOCUS" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode) ; No return value EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func _DebugPrint($s_Text, $sLine = @ScriptLineNumber) ConsoleWrite( _ "!===========================================================" & @CRLF & _ "+======================================================" & @CRLF & _ "-->Line(" & StringFormat("%04d", $sLine) & "):" & @TAB & $s_Text & @CRLF & _ "+======================================================" & @CRLF) EndFunc ;==>_DebugPrint ; Write a line to the memo control Func MemoWrite($sMessage) GUICtrlSetData($g_idMemo, $sMessage & @CRLF, 1) EndFunc ;==>MemoWrite Spoiler Renamer - Rename files and folders, remove portions of text from the filename etc. GPO Tool - Export/Import Group policy settings. MirrorDir - Synchronize/Backup/Mirror Folders BeatsPlayer - Music player. Params Tool - Right click an exe to see it's parameters or execute them. String Trigger - Triggers pasting text or applications or internet links on specific strings. Inconspicuous - Hide files in plain sight, not fully encrypted. Regedit Control - Registry browsing history, quickly jump into any saved key. Time4Shutdown - Write the time for shutdown in minutes. Power Profiles Tool - Set a profile as active, delete, duplicate, export and import. Finished Task Shutdown - Shuts down pc when specified window/Wndl/process closes. NetworkSpeedShutdown - Shuts down pc if download speed goes under "X" Kb/s. IUIAutomation - Topic with framework and examples Au3Record.exe Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted June 1, 2020 Moderators Share Posted June 1, 2020 careca, Take a look at my GUIListViewEx UDF (link is in my sig) - all items editable and much, much more. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
careca Posted June 1, 2020 Author Share Posted June 1, 2020 (edited) Thank you, I am right now, i remembered about it in the meantime. Kind of struggling to figure out what i need from the first example to make this happen. Filtered code out and now i think i get the essential, for anyone looking for this expandcollapse popup#include <GuiConstantsEx.au3> #include <WindowsConstants.au3> #include "GUIListViewEx.au3" #include <Array.au3> Global $iCount_Left = 20, $iCount_Right = 20, $vData, $sMsg, $aLV_List_Left, $aLV_List_Right, $aRet, $iEditMode = 0 $hGUI = GUICreate("LVEx Example 1", 500, 430) $hListView_Right = _GUICtrlListView_Create($hGUI, "", 10, 20, 480, 400, BitOR($LVS_DEFAULT, $WS_BORDER)) _GUICtrlListView_SetExtendedListViewStyle($hListView_Right, $LVS_EX_FULLROWSELECT) _GUICtrlListView_AddColumn($hListView_Right, "Peter", 83) _GUICtrlListView_AddColumn($hListView_Right, "Paul", 83) _GUICtrlListView_AddColumn($hListView_Right, "Mary", 83) _GUICtrlListView_SetTextBkColor($hListView_Right, 0xDDFFDD) For $i = 1 To $iCount_Right _GUICtrlListView_AddItem($hListView_Right, "Peter " & $i - 1) If Mod($i, 4) Then _GUICtrlListView_AddSubItem($hListView_Right, $i - 1, "Paul " & $i - 1, 1) EndIf _GUICtrlListView_AddSubItem($hListView_Right, $i - 1, "Mary " & $i - 1, 2) Next ; Initiate LVEx - use read content as array - count parameter set - red insert mark - drag image - move edit by click + headers editable $iLV_Right_Index = _GUIListViewEx_Init($hListView_Right, $aLV_List_Right, 1, 0xFF0000, True, 4 + 8) ; All columns editable - simple text selected on open _GUIListViewEx_SetEditStatus($iLV_Right_Index, "*") ; Register for sorting, dragging and editing _GUIListViewEx_MsgRegister() GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit EndSwitch $vRet = _GUIListViewEx_EventMonitor($iEditMode) If @error Then MsgBox($MB_SYSTEMMODAL, "Error", "Event error: " & @error) EndIf Sleep(100) WEnd Edited June 1, 2020 by careca Spoiler Renamer - Rename files and folders, remove portions of text from the filename etc. GPO Tool - Export/Import Group policy settings. MirrorDir - Synchronize/Backup/Mirror Folders BeatsPlayer - Music player. Params Tool - Right click an exe to see it's parameters or execute them. String Trigger - Triggers pasting text or applications or internet links on specific strings. Inconspicuous - Hide files in plain sight, not fully encrypted. Regedit Control - Registry browsing history, quickly jump into any saved key. Time4Shutdown - Write the time for shutdown in minutes. Power Profiles Tool - Set a profile as active, delete, duplicate, export and import. Finished Task Shutdown - Shuts down pc when specified window/Wndl/process closes. NetworkSpeedShutdown - Shuts down pc if download speed goes under "X" Kb/s. IUIAutomation - Topic with framework and examples Au3Record.exe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now