Jump to content
water

Active Directory UDF - Help & Support (III)

Recommended Posts

As the Active Directory UDF - Help & Support thread has grown too big, I start a new one.
The original thread can be found here.

Edited by Jos

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

In my custom script I have the #RequireAdmin due to other items being run.  So I did add it to the stock _AD_CreateComputer.au3 and compiled.  I got the same error result with or without #RequireAdmin on the workgroup machine.

Share this post


Link to post
Share on other sites

I have absolutely no idea what goes on. Can we do it step by step?

First _AD_Open. On the workstation do you use the same user as on the connected PC?


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

For _AD_Open.  Variable:  $techusername, $techpassword are the same for all scenarios and input fields(User ID and password in the GUI) in _AD_Open.au3  All other fields also match what is being used (DNSDomain, HostServer, Confiuration) in the GUI and the AD_Open line of code.

If I use the stock script from your UDF:

- Domain machine:  Works fine.  I'm able to get the "Logon Was Successful" with the same username/password passed by $techusername, $techpassword

- Workgroup: Gives -2147352567 upon launch (expected since it doesn't know what the AD server name should be on the workgroup machine)

If I modify the line in _AD_Open.au3 from

_AD_Open()

to 

_AD_Open($techusername, $techpassword, "DC=us,DC=XXXX,DC=com", "XXAD_serverXX.us.XXXX.com", "CN=Configuration,DC=XXXX,DC=com") ;to pass the technician username / password who has rights to AD and the AD variables

- Domain Machine: works fine.  I'm able to get the "Logon Was Successful" with the same username/password passed by $techusername, $techpassword

- Workgroup: Works fine, no error.  I'm able to get the "Logon Was Successful" with the same username/password passed by $techusername, $techpassword

(Result is the same with both "CN=Configuration,DC=XXXX,DC=com" and "CN=Configuration,DC=us,DC=XXXX,DC=com")

Edited by gonzo070777

Share this post


Link to post
Share on other sites

Started playing around with scripts again... this was my first attempt, not sure if it's a config on my side or a bug.

Here's the script...

#include <AD.au3>

$sSam = @ComputerName & "$"
$sFQDN = _AD_SamAccountNameToFQDN($sSam)

#Region --- CodeWizard generated code Start ---
;MsgBox features: Title=Yes, Text=Yes, Buttons=OK, Icon=Info, Miscellaneous=Top-most attribute
MsgBox(262208,"Computer OU",$sFQDN)
#EndRegion --- CodeWizard generated code End ---

The script hangs in SciTE.  Using the latest version available.

d5eUIGc.jpg

Edited by dataspike

Share this post


Link to post
Share on other sites

Welcome to AutoIt and the forum!

Before you can call any of the _AD_* functions you need to call _AD_Open to connect to AD.

See any of the example scripts provided with the UDF.

Edited by water

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

Welcome to AutoIt and the forum!

Before you can call any of the _AD_* functions you need to call _AD_Open to connect to AD.

See any of the example scripts provided with the UDF.

Ah, figured it was something simple.   I found the sample code in another post, but you only the two strings were listed.

Thanks!

Share this post


Link to post
Share on other sites

:)


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

Version 1.4.1.0 (Bug fix) of the UDF has been released.

Only runs with AutoIt 3.3.10.2 and later.

Please test before using in production!

For download please see my signature.


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

I have a problem with _AD_MoveObject

I have the same error with the helpfile provided with the udf as in my script:

I get an error about the object doesn't exist, but "_AD_SamAccountNameToFQDN(@UserName)" seems to be the correct value. I double checked that value

while @username gives me error: Return code '-2147352567' from Active Directory

I am not getting an error about the ou, so this part seems to be oke.

what am I doing wrong?

edit: I am using the latest UDF with autoit 3.3.10.2

Edited by Jochem

Share this post


Link to post
Share on other sites

Can you add

_AD_ErrorNotify(2)

at the top of your script so we get detailed error information?

-2147352567 (decimal) = 0x80020009 (hex) just means: General Error


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

this is the error I get with @username as $sobject

Iwht this error I triple checked the ou and this one seems to be oke.

post-37106-0-77621200-1392906905_thumb.j

Edited by Jochem

Share this post


Link to post
Share on other sites

Can you please post the full _AD_MoveObject statement you use?


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

#AutoIt3Wrapper_AU3Check_Parameters= -d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6

#AutoIt3Wrapper_AU3Check_Stop_OnWarning=Y

; *****************************************************************************

; Example 1

; Moves an AD object to another OU.

; *****************************************************************************

#include <AD.au3>

#include <ButtonConstants.au3>

#include <GUIConstantsEx.au3>

#include <WindowsConstants.au3>

_AD_ErrorNotify(2)

; Open Connection to the Active Directory

_AD_Open()

If @error Then Exit MsgBox(16, "Active Directory Example Skript", "Function _AD_Open encountered a problem. @error = " & @error & ", @extended = " & @extended)

Global $iReply = MsgBox(308, "Active Directory Functions - Example 1", "This script moves an object to another OU." & @CRLF & @CRLF & _

  "Are you sure you want to change the Active Directory?")

If $iReply <> 6 Then Exit

; Enter object to move and target OU

#region ### START Koda GUI section ### Form=

Global $Form1 = GUICreate("Active Directory Functions - Example 1", 814, 124)

GUICtrlCreateLabel("Object to move (FQDN or sAMAccountName):", 8, 10, 231, 17)

GUICtrlCreateLabel("OU where to move to (FQDN):", 8, 42, 231, 17)

Global $IObject = GUICtrlCreateInput(_AD_SamAccountNameToFQDN(@UserName), 241, 8, 559, 21)

;~ Global $IObject = GUICtrlCreateInput(@UserName, 241, 8, 559, 21)

Global $ITargetOU = GUICtrlCreateInput("", 241, 40, 559, 21)

Global $BOK = GUICtrlCreateButton("Move object", 8, 72, 130, 33)

Global $BCancel = GUICtrlCreateButton("Cancel", 728, 72, 73, 33, BitOR($GUI_SS_DEFAULT_BUTTON, $BS_DEFPUSHBUTTON))

GUISetState(@SW_SHOW)

#endregion ### END Koda GUI section ###

While 1

 Global $nMsg = GUIGetMsg()

 Switch $nMsg

  Case $GUI_EVENT_CLOSE, $BCancel

   Exit

  Case $BOK

   Global $sObject = GUICtrlRead($IObject)

   Global $sTargetOU = GUICtrlRead($ITargetOU)

   ExitLoop

 EndSwitch

WEnd

; Move object

Global $iValue = _AD_MoveObject($sTargetOU, $sObject)

If $iValue = 1 Then

 MsgBox(64, "Active Directory Functions - Example 1", "Object '" & $sObject & "' successfully moved to '" & $sTargetOU & "'")

ElseIf @error = 1 Then

 MsgBox(64, "Active Directory Functions - Example 1", "Target OU '" & $sTargetOU & "' does not exist")

ElseIf @error = 2 Then

 MsgBox(64, "Active Directory Functions - Example 1", "Object '" & $sObject & "' does not exist")

Else

 MsgBox(64, "Active Directory Functions - Example 1", "Return code '" & @error & "' from Active Directory")

EndIf

; Close Connection to the Active Directory

_AD_Close()

 

actually I use the help file now for testing purposes, this one gives the same error as my script.

I think it is a 2003 AD error with trailing slashes "/" in the FQGN

Edited by Jochem

Share this post


Link to post
Share on other sites

Can you please post the data you enter into the GUI (mask company specific information if needed).


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

Last thing I would try is to use the hex value. Means

$sobject = CN=Jochem xxxxxx \5Cxxxx,OU=medewerkers_CAD_Grafisch,OU=straat1,DC=xxxx,DC=nl

I this doesn't help then you need to install the hotfix.

For details about escaping characters see this site.


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

thanks, but it didn`t work.

anyway we need to upgrade our AD to 2008, this will solve the problem, for now it isn`t a big issue, because I use this command only for disabled users (a few per month), so i doo this manually.

Share this post


Link to post
Share on other sites

Thanks for the feedback.

As I'm always eager to improve the UDF I'm "glad" to hear that it is a MS bug ;)


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2019-10-24 - Version 1.4.14.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2019-11-30 - Version 1.4.0.0) - Download - General Help & Support - Example Scripts - Wiki
Outlook Tools (2019-07-22 - Version 0.6.0.0) - Download - General Help & Support - Wiki
ExcelChart (2017-07-21 - Version 0.4.0.1) - Download - General Help & Support - Example Scripts
PowerPoint (2017-06-06 - Version 0.0.5.0) - Download - General Help & Support
Excel - Example Scripts - Wiki
Word - Wiki
Task Scheduler (NEW 2019-12-03 - Version 1.5.1.0) - Download - General Help & Support - Wiki

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

These COM errors are really getting to me.


> Deleting user dramirez
COM Error Encountered in Get list of accounts going to be deleted.au3
AD UDF version = 1.4.0
@AutoItVersion = 3.3.8.1
@AutoItX64 = 0
@Compiled = 0
@OSArch = X86
@OSVersion = WIN_7
Scriptline = 640
NumberHex = 80020009
Number = -2147352567
WinDescription =
Description = The directory property cannot be found in the cache.
Source = Active Directory
HelpFile =
HelpContext = 0
LastDllError = 0
========================================================
>Exit code: 0    Time: 13.300

 

Full Code

#NoTrayIcon
#include <AD.au3>
#include <Date.au3>

Global $aUsers, $sUsername, $sLogin, $sModified, $iLogin, $iModified, $sAttribute, $aResult
Global $iStaffDays = 180 ; days
Global $iStudentDays = 90 ; days

_AD_Open() ; open connection to AD
$aUsers = _AD_GetObjectsInOU("OU=Purgatory,DC=ad,DC=domain,DC=org", "(objectCategory=user)") ; read users in purgatory into an array
For $i = 1 to UBound($aUsers) - 1
    $sUsername = $aUsers[$i]
    $sModified = StringRegExpReplace(_AD_GetObjectAttribute($sUsername, "whenChanged"), "(\d{4})(\d{2})(\d{2}).+", "$1/$2/$3") ; convert YYYYMMDDHHMMSS into YYYY/MM/DD
    $iModified = _DateDiff("D", $sModified, _NowCalcDate()) ; compare dates
    $sAttribute = _AD_GetObjectAttribute($sUsername, "extensionAttribute2")
    If @error Or $sAttribute = "" Then ExitLoop
    If $sAttribute <> "student" Then
        If $iModified >= $iStudentDays Then ; if last modified is more than X days
            ConsoleWrite("> Deleting user " & $sUsername & @CR)
            _ArrayAdd($aResult, $sUsername)
        EndIf
    Else
        If $iModified >= $iStaffDays Then ; if last modified is more than X days
            ConsoleWrite("> Deleting user " & $sUsername & @CR)
            _ArrayAdd($aResult, $sUsername)
        EndIf
    EndIf
Next
_AD_Close() ; close connection to AD
_ArrayDisplay($aResult)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Stormgrade
      Hello,
      I'm searching the UDF GDIpProgress.au3 from ProgAndy
      None of the links in topic
       works
      Can't someone upload it please ?
    • By water
      Extensive library to control and manipulate Microsoft Active Directory.

      Threads: Development - General Help & Support - Example Scripts - Wiki
      Previous downloads: 30467
       
      Known Bugs: (last changed: 2019-08-19)
      None
        Things to come: (last changed: 2019-08-19)
      None
      BTW: If you like this UDF please click the "I like this" button. This tells me where to next put my development effort
    • By ozymandius257
      This is probably a very simple question (I hope!)
      I'm looking to use a UDF to access a SQL database, and have found ADO.au3, but I can't seem to work out how to use it.
      I've copied the files ado.au3 and ado_constants.au3 into the folder C:\Program Files (x86)\AutoIt3\Include, then opened SciTe and started a new project.
      But when I type #include<AD - I don't get offered ADO.au3.
      (I know I should be using the folder C:\Program Files (x86)\AutoIt3\UserInclude, but when it didn't work from there, I tried the above).
      What am I doing wrong?
       
    • By BetaLeaf
      What is Rollbar?
      Rollbar provides real-time error alerting & debugging tools for developers. Learn more about it at https://rollbar.com/product/
      Demo: https://rollbar.com/demo/demo/
      Screenshot:
      Instructions: (RollbarTest.au3)
      ; Include RollbarSDK #include "RollbarSDK.au3" ;Turns on ConsoleWrite debugging override. ;Global $Rollbar_Debug=False ; Initialize RollbarSDK with the project's API key. ; Parameters ....: $__Rollbar_sToken - [Required] Go to https://rollbar.com/<User>/<ProjectName>/settings/access_tokens/ for your project. Use the token for post_server_item. _Rollbar_Init("eaa8464a4082eeabd9454465b8f0c0af") ; Write code that causes an error you want to catch, then call ; _Rollbar_Send ; Parameters ....: $__Rollbar_sErrorLevel - [Required] Must be one of the following values: Debug, Info, Warning, Error, Critical. ; $__Rollbar_sMessage - [Required] The message to be sent. This should contain any useful debugging info that will help you debug. ; $__Rollbar_sMessageSummary - [Optional] A string that will be used as the title of the Item occurrences will be grouped into. Max length 255 characters. If omitted, Rollbar will determine this on the backend. _Rollbar_Send("Debug", "This is an debug message. If you received this, you were successful!", "Debug Message") _Rollbar_Send("Info", "This is a test message. If you received this, you were successful!", "Info Message") _Rollbar_Send("Warning", "This is an warning message. If you received this, you were successful!", "Warning Message") _Rollbar_Send("Error", "This is an error message. If you received this, you were successful!", "Error Message") _Rollbar_Send("Critical", "This is an critical message. If you received this, you were successful!", "Critical Message") _Rollbar_Send("Info", "This is a test message. If you received this, you were successful!") ;No Message ; Rollbar_Send's helper functions ; Parameters ....: $__Rollbar_sMessage - [Required] The message to be sent. This should contain any useful debugging info that will help you debug. ; $__Rollbar_sMessageSummary - [Optional] A string that will be used as the title of the Item occurrences will be grouped into. Max length 255 characters. If omitted, Rollbar will determine this on the backend. _Rollbar_SendDebug("This is an debug message. If you received this, you were successful!", "Debug Message") _Rollbar_SendInfo("This is a test message. If you received this, you were successful!", "Info Message") _Rollbar_SendWarning("This is an warning message. If you received this, you were successful!", "Warning Message") _Rollbar_SendError("This is an error message. If you received this, you were successful!", "Error Message") _Rollbar_SendCritical("This is an critical message. If you received this, you were successful!", "Critical Message") ; Usable Example Local $sImportantFile = "C:\NOTAREALFILE_1234554321.txt" Switch FileExists($sImportantFile) Case True MsgBox(0, "Example Script", "An important file was found. Continuing...") Case Else _Rollbar_SendCritical('An important file was missing. Halting... File: "' & $sImportantFile & '"', 'Important file "' & $sImportantFile & '" is missing.') EndSwitch Notes: Please comment your feedback, advice, & suggestions below. While this is only a proof of concept, I will expand its feature set for everyone to use. 
      Right now, it is fully functional but not tested in production.
       
       
      Changelog:
      RollbarSDK.au3
      RollbarTest.au3
      v0.2
       
      v0.1.1
       
    • By AdamUL
      Below are some functions that I created when I needed to get some Group Policy information via script.  The quickest way I found to get this information was using the Group Policy Module for PowerShell.  This is not a full UDF for the Group Policy Module.  There are a lot more options available with the cmdlets, and this only touches on a few.  To use the functions below, for a Windows client, you will need to install Remote Server Administration Tools (RSAT).  For Windows Server 2012 or later, you will need to install the Group Policy Management Console.  
      Remote Server Administration Tools (RSAT)
      Installing the Group Policy Management Console via PowerShell for Windows Server 2012 or later.  Run in an Admin PowerShell prompt.
      Install-WindowsFeature –Name GPMC PowerShell Group Policy Module Documentation
      For the example below, the AD UDF is only required to query GPO names, but is not required to use the functions.  
      #include <AD.au3> #include <WinAPIFiles.au3> Global $sLDAPFilter = "(name=*)" Global $sExcludeFilter = "" Global $sIncludeFilter = "" Global $sBaseDN = "DC=ad,DC=university,DC=edu" Global $sDataToRetrieve = "sAMAccountName" $sIncludeFilter = "(&(displayName=LIBS-*))" ;GPO Names. $sLDAPFilter = "(&(objectClass=groupPolicyContainer)" & $sExcludeFilter & $sIncludeFilter & ")" $sDataToRetrieve = "displayName,name" _AD_Open() Global $aGPONames = _AD_GetObjectsInOU($sBaseDN, $sLDAPFilter, 2, $sDataToRetrieve) If @error Then MsgBox(64, "Active Directory Functions", "No objects found") Exit _AD_Close() EndIf _AD_Close() ;Add column headers to the output array. Global $aDataToRetrieve = StringSplit($sDataToRetrieve, ",", 2) For $i = 0 To UBound($aGPONames, 2) - 1 Step 1 $aGPONames[0][$i] = $aDataToRetrieve[$i] Next _ArraySort($aGPONames) _ArrayDisplay($aGPONames, "LIBS GPOs") ;For Testing. Global $aGPOPermissions = _AD_GetGPOPermissionsPS($aGPONames[1][0]) If @error Then Exit 1 _ArrayDisplay($aGPOPermissions, $aGPONames[1][0]) Global $sOU = "OU=libs,OU=active,DC=ad,DC=university,DC=edu" Global $aGPOLinks = _AD_GetGPOLinksPS($sOU) If @error Then Exit 2 _ArrayDisplay($aGPOLinks, $sOU) Global $aGPOInheritedLinks = _AD_GetGPOInheritedLinksPS($sOU) If @error Then Exit 2 _ArrayDisplay($aGPOInheritedLinks, $sOU) Global $aGPOs = _AD_GetAllGPOsPS() If @error Then Exit 3 _ArraySort($aGPOs) _ArrayDisplay($aGPOs, "GPOs") Global $aGPOName = _AD_GetGPOByNamePS($aGPONames[1][0]) If @error Then Exit 4 _ArrayDisplay($aGPOName, $aGPONames[1][0]) Global $aGPOGuid = _AD_GetGPOByGuidPS($aGPONames[1][1]) If @error Then Exit 5 _ArrayDisplay($aGPOGuid, $aGPONames[1][1]) Global $sReportName = "C:\Users\adamul\Desktop\Group Policy Object (GPO) PowerShell\Reports\" & $aGPONames[1][0] & ".html" _AD_GetGPOReportByNamePS($aGPONames[1][0], $sReportName) If @error Then Exit 6 Global $sReportGUID = "C:\Users\adamul\Desktop\Group Policy Object (GPO) PowerShell\Reports\" & $aGPONames[1][1] & ".html" _AD_GetGPOReportByGuidPS($aGPONames[1][1], $sReportGUID) If @error Then Exit 6 Func _AD_GetGPOPermissionsPS($sGPOName) ;An array of permission level for one or more security principals on a specified GPO. Local $sGPOCmd = 'powershell "Import-Module GroupPolicy; Get-GPPermissions -Name ''' & $sGPOName & ''' -All"' ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. Local $iGPOCmdOutputSS = StringInStr($sGPOCmdOutput, @CRLF & @CRLF) If $iGPOCmdOutputSS = 0 Then Return SetError(1, 0, 0) Local $sGPOCmdOutputSS = StringMid($sGPOCmdOutput, 1, $iGPOCmdOutputSS) ;~ ConsoleWrite(@CRLF & @CRLF & $sGPOCmdOutputSS & @CRLF) Local $sRegEx = "([^:\r\n]*):.*" Local $aProperties = StringRegExp($sGPOCmdOutputSS, $sRegEx, 3) ;~ _ArrayDisplay($aProperties) ;For testing. If StringInStr($sGPOCmdOutput, "ArgumentException") Then Return SetError(2, 0, 0) ;Get data on multiple lines to a single line. $sGPOCmdOutput = StringRegExpReplace($sGPOCmdOutput, "(\r\n\h{2,})", "") Local $aGPOCmdOutput = StringSplit($sGPOCmdOutput, @CRLF & @CRLF, 1) ;~ _ArrayDisplay($aGPOCmdOutput) ;For testing. ;Convert from a list output to a 2D array. Local $aGPOCmdOutput2D[$aGPOCmdOutput[0]][UBound($aProperties)] Local $aTemp For $i = 1 To $aGPOCmdOutput[0] Step 1 $aTemp = StringSplit($aGPOCmdOutput[$i], @CRLF, 1) For $j = 1 To $aTemp[0] Step 1 For $k = 0 To UBound($aProperties) - 1 Step 1 If StringInStr($aTemp[$j], $aProperties[$k]) Then $aGPOCmdOutput2D[$i - 1][$k] = StringStripWS(StringReplace($aTemp[$j], $aProperties[$k] & ":", ""), 3) EndIf Next Next Next ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. For $i = 0 To UBound($aProperties) - 1 Step 1 $aProperties[$i] = StringStripWS($aProperties[$i], 3) Next _ArrayTranspose($aProperties) _ArrayConcatenate($aProperties, $aGPOCmdOutput2D) Return $aProperties EndFunc ;==>_AD_GetGPOPermissionsPS Func _AD_GetGPOLinksPS($sOUName) ;An array of GPOs that are linked directly to the location. Local $sGPOCmd = 'powershell "Import-Module GroupPolicy; (Get-GPInheritance -Target ''' & $sOUName & "').GpoLinks" ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. Local $iGPOCmdOutputSS = StringInStr($sGPOCmdOutput, @CRLF & @CRLF) If $iGPOCmdOutputSS = 0 Then Return SetError(1, 0, 0) Local $sGPOCmdOutputSS = StringMid($sGPOCmdOutput, 1, $iGPOCmdOutputSS) ;~ ConsoleWrite(@CRLF & @CRLF & $sGPOCmdOutputSS & @CRLF) ;For testing. Local $sRegEx = "([^:\r\n]*):.*" Local $aProperties = StringRegExp($sGPOCmdOutputSS, $sRegEx, 3) ;~ _ArrayDisplay($aProperties) ;For testing. If StringInStr($sGPOCmdOutput, "ArgumentException") Then Return SetError(1, 0, 0) ;Get data on multiple lines to a single line. $sGPOCmdOutput = StringRegExpReplace($sGPOCmdOutput, "(\r\n\h{2,})", "") Local $aGPOCmdOutput = StringSplit($sGPOCmdOutput, @CRLF & @CRLF, 1) ;~ _ArrayDisplay($aGPOCmdOutput) ;For testing. ;Convert from a list output to a 2D array. Local $aGPOCmdOutput2D[$aGPOCmdOutput[0]][UBound($aProperties)] Local $aTemp For $i = 1 To $aGPOCmdOutput[0] Step 1 $aTemp = StringSplit($aGPOCmdOutput[$i], @CRLF, 1) For $j = 1 To $aTemp[0] Step 1 For $k = 0 To UBound($aProperties) - 1 Step 1 If StringInStr($aTemp[$j], $aProperties[$k]) Then $aGPOCmdOutput2D[$i - 1][$k] = StringStripWS(StringReplace($aTemp[$j], $aProperties[$k] & ":", ""), 3) EndIf Next Next Next ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. For $i = 0 To UBound($aProperties) - 1 Step 1 $aProperties[$i] = StringStripWS($aProperties[$i], 3) Next _ArrayTranspose($aProperties) _ArrayConcatenate($aProperties, $aGPOCmdOutput2D) Return $aProperties EndFunc ;==>_AD_GetGPOLinksPS Func _AD_GetGPOInheritedLinksPS($sOUName) ;An array of GPOs that are applied to the location when Group Policy is processed on a client. Local $sGPOCmd = 'powershell "Import-Module GroupPolicy; (Get-GPInheritance -Target ''' & $sOUName & "').InheritedGpoLinks" ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. Local $iGPOCmdOutputSS = StringInStr($sGPOCmdOutput, @CRLF & @CRLF) If $iGPOCmdOutputSS = 0 Then Return SetError(1, 0, 0) Local $sGPOCmdOutputSS = StringMid($sGPOCmdOutput, 1, $iGPOCmdOutputSS) ;~ ConsoleWrite(@CRLF & @CRLF & $sGPOCmdOutputSS & @CRLF) ;For testing. Local $sRegEx = "([^:\r\n]*):.*" Local $aProperties = StringRegExp($sGPOCmdOutputSS, $sRegEx, 3) ;~ _ArrayDisplay($aProperties) ;For testing. If StringInStr($sGPOCmdOutput, "ArgumentException") Then Return SetError(1, 0, 0) ;Get data on multiple lines to a single line. $sGPOCmdOutput = StringRegExpReplace($sGPOCmdOutput, "(\r\n\h{2,})", "") Local $aGPOCmdOutput = StringSplit($sGPOCmdOutput, @CRLF & @CRLF, 1) ;~ _ArrayDisplay($aGPOCmdOutput) ;For testing. ;Convert from a list output to a 2D array. Local $aGPOCmdOutput2D[$aGPOCmdOutput[0]][UBound($aProperties)] Local $aTemp For $i = 1 To $aGPOCmdOutput[0] Step 1 $aTemp = StringSplit($aGPOCmdOutput[$i], @CRLF, 1) For $j = 1 To $aTemp[0] Step 1 For $k = 0 To UBound($aProperties) - 1 Step 1 If StringInStr($aTemp[$j], $aProperties[$k]) Then $aGPOCmdOutput2D[$i - 1][$k] = StringStripWS(StringReplace($aTemp[$j], $aProperties[$k] & ":", ""), 3) EndIf Next Next Next ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. For $i = 0 To UBound($aProperties) - 1 Step 1 $aProperties[$i] = StringStripWS($aProperties[$i], 3) Next _ArrayTranspose($aProperties) _ArrayConcatenate($aProperties, $aGPOCmdOutput2D) Return $aProperties EndFunc ;==>_AD_GetGPOInheritedLinksPS Func _AD_GetAllGPOsPS() ;An array of information on all the GPOs in a domain. Local $sGPOCmd = 'powershell "Import-Module GroupPolicy; Get-GPO -All"' ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. Local $iGPOCmdOutputSS = StringInStr($sGPOCmdOutput, @CRLF & @CRLF) If $iGPOCmdOutputSS = 0 Then Return SetError(1, 0, 0) Local $sGPOCmdOutputSS = StringMid($sGPOCmdOutput, 1, $iGPOCmdOutputSS) ;~ ConsoleWrite(@CRLF & @CRLF & $sGPOCmdOutputSS & @CRLF) ;For testing. Local $sRegEx = "([^:\r\n]*):.*" Local $aProperties = StringRegExp($sGPOCmdOutputSS, $sRegEx, 3) ;~ _ArrayDisplay($aProperties) If StringInStr($sGPOCmdOutput, "ArgumentException") Then Return SetError(1, 0, 0) ;Get data on multiple lines to a single line. $sGPOCmdOutput = StringRegExpReplace($sGPOCmdOutput, "(\r\n\h{2,})", "") Local $aGPOCmdOutput = StringSplit($sGPOCmdOutput, @CRLF & @CRLF, 1) ;~ _ArrayDisplay($aGPOCmdOutput) ;For testing. ;Convert from a list output to a 2D array. Local $aGPOCmdOutput2D[$aGPOCmdOutput[0]][UBound($aProperties)] Local $aTemp For $i = 1 To $aGPOCmdOutput[0] Step 1 $aTemp = StringSplit($aGPOCmdOutput[$i], @CRLF, 1) For $j = 1 To $aTemp[0] Step 1 For $k = 0 To UBound($aProperties) - 1 Step 1 If StringInStr($aTemp[$j], $aProperties[$k]) Then $aGPOCmdOutput2D[$i - 1][$k] = StringStripWS(StringReplace($aTemp[$j], $aProperties[$k] & ":", ""), 3) EndIf Next Next Next ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. For $i = 0 To UBound($aProperties) - 1 Step 1 $aProperties[$i] = StringStripWS($aProperties[$i], 3) Next _ArrayTranspose($aProperties) _ArrayConcatenate($aProperties, $aGPOCmdOutput2D) Return $aProperties EndFunc ;==>_AD_GetAllGPOsPS Func _AD_GetGPOByNamePS($sGPOName) ;An array of information on one Group Policy Object (GPO) in a domain by Display Name. Local $sGPOCmd = 'powershell "Import-Module GroupPolicy; Get-GPO -Name ''' & $sGPOName & '''"' ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. ;Add end of line characters for single return group to be processed. $sGPOCmdOutput = $sGPOCmdOutput & @CRLF & @CRLF Local $iGPOCmdOutputSS = StringInStr($sGPOCmdOutput, @CRLF & @CRLF) If $iGPOCmdOutputSS = 0 Then Return SetError(1, 0, 0) Local $sGPOCmdOutputSS = StringMid($sGPOCmdOutput, 1, $iGPOCmdOutputSS) ConsoleWrite(@CRLF & @CRLF & $sGPOCmdOutputSS & @CRLF) Local $sRegEx = "([^:\r\n]*):.*" Local $aProperties = StringRegExp($sGPOCmdOutputSS, $sRegEx, 3) ;~ _ArrayDisplay($aProperties) ;For testing. If StringInStr($sGPOCmdOutput, "ArgumentException") Then Return SetError(1, 0, 0) ;Get data on multiple lines to a single line. $sGPOCmdOutput = StringRegExpReplace($sGPOCmdOutput, "(\r\n\h{2,})", "") ;Remove last @CRLF to prevent blank row in return array. $sGPOCmdOutput = StringTrimRight($sGPOCmdOutput, 2) Local $aGPOCmdOutput = StringSplit($sGPOCmdOutput, @CRLF & @CRLF, 1) ;~ _ArrayDisplay($aGPOCmdOutput) ;For testing. ;Convert from a list output to a 2D array. Local $aGPOCmdOutput2D[$aGPOCmdOutput[0]][UBound($aProperties)] ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. Local $aTemp For $i = 1 To $aGPOCmdOutput[0] Step 1 $aTemp = StringSplit($aGPOCmdOutput[$i], @CRLF, 1) For $j = 1 To $aTemp[0] Step 1 For $k = 0 To UBound($aProperties) - 1 Step 1 If StringInStr($aTemp[$j], $aProperties[$k]) Then $aGPOCmdOutput2D[$i - 1][$k] = StringStripWS(StringReplace($aTemp[$j], $aProperties[$k] & ":", ""), 3) EndIf Next Next Next ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. For $i = 0 To UBound($aProperties) - 1 Step 1 $aProperties[$i] = StringStripWS($aProperties[$i], 3) Next _ArrayTranspose($aProperties) _ArrayConcatenate($aProperties, $aGPOCmdOutput2D) Return $aProperties EndFunc ;==>_AD_GetGPOByNamePS Func _AD_GetGPOByGuidPS($sGPOGuid) ;An array of information on one Group Policy Object (GPO) in a domain by GUID. Local $sGPOCmd = 'powershell "Import-Module GroupPolicy; Get-GPO -Guid ''' & $sGPOGuid & '''"' ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. ;Add end of line characters for single return group to be processed. $sGPOCmdOutput = $sGPOCmdOutput & @CRLF & @CRLF Local $iGPOCmdOutputSS = StringInStr($sGPOCmdOutput, @CRLF & @CRLF) If $iGPOCmdOutputSS = 0 Then Return SetError(1, 0, 0) Local $sGPOCmdOutputSS = StringMid($sGPOCmdOutput, 1, $iGPOCmdOutputSS) ;~ ConsoleWrite(@CRLF & @CRLF & $sGPOCmdOutputSS & @CRLF) ;For testing. Local $sRegEx = "([^:\r\n]*):.*" Local $aProperties = StringRegExp($sGPOCmdOutputSS, $sRegEx, 3) ;~ _ArrayDisplay($aProperties) ;For testing. If StringInStr($sGPOCmdOutput, "ArgumentException") Then Return SetError(1, 0, 0) ;Get data on multiple lines to a single line. $sGPOCmdOutput = StringRegExpReplace($sGPOCmdOutput, "(\r\n\h{2,})", "") ;Remove last @CRLF to prevent blank row in return array. $sGPOCmdOutput = StringTrimRight($sGPOCmdOutput, 2) Local $aGPOCmdOutput = StringSplit($sGPOCmdOutput, @CRLF & @CRLF, 1) ;~ _ArrayDisplay($aGPOCmdOutput) ;For testing. ;Convert from a list output to a 2D array. Local $aGPOCmdOutput2D[$aGPOCmdOutput[0]][UBound($aProperties)] ;~ _ArrayDisplay($aGPOCmdOutput2D) Local $aTemp For $i = 1 To $aGPOCmdOutput[0] Step 1 $aTemp = StringSplit($aGPOCmdOutput[$i], @CRLF, 1) For $j = 1 To $aTemp[0] Step 1 For $k = 0 To UBound($aProperties) - 1 Step 1 If StringInStr($aTemp[$j], $aProperties[$k]) Then $aGPOCmdOutput2D[$i - 1][$k] = StringStripWS(StringReplace($aTemp[$j], $aProperties[$k] & ":", ""), 3) EndIf Next Next Next ;~ _ArrayDisplay($aGPOCmdOutput2D) ;For testing. For $i = 0 To UBound($aProperties) - 1 Step 1 $aProperties[$i] = StringStripWS($aProperties[$i], 3) Next _ArrayTranspose($aProperties) _ArrayConcatenate($aProperties, $aGPOCmdOutput2D) Return $aProperties EndFunc ;==>_AD_GetGPOByGuidPS Func _AD_GetGPOReportByNamePS($sGPOName, $sReportFullPath, $sReportType = "HTML") ;Generates a report either in XML or HTML format for a specified GPO by name in a domain. Switch $sReportType Case "HTML", "XML" Case Else Return SetError(1, 0, False) EndSwitch Local $sPath = StringRegExpReplace($sReportFullPath, "(^.*\\)(.*)", "$1") ;~ ConsoleWrite($sPath & @CRLF) ;For testing. ;~ If Not FileExists($sPath) Then Return SetError(2, 0, False) Local $sGPOCmd = 'powershell "Get-GPOReport -Name ''' & $sGPOName & ''' -ReportType ' & $sReportType & ' -Path ''' & $sReportFullPath & '''"' ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. If $sGPOCmdOutput <> "" Then SetError(3, 0, False) Return True EndFunc ;==>_AD_GetGPOReportByNamePS Func _AD_GetGPOReportByGuidPS($sGPOGuid, $sReportFullPath, $sReportType = "HTML") ;Generates a report either in XML or HTML format for a specified GPO by GUID in a domain. Switch $sReportType Case "HTML", "XML" Case Else Return SetError(1, 0, False) EndSwitch Local $sPath = StringRegExpReplace($sReportFullPath, "(^.*\\)(.*)", "$1") ;~ ConsoleWrite($sPath & @CRLF) ;For testing. ;~ If Not FileExists($sPath) Then Return SetError(2, 0, False) Local $sGPOCmd = 'powershell "Get-GPOReport -GUID ''' & $sGPOGuid & ''' -ReportType ' & $sReportType & ' -Path ''' & $sReportFullPath & '''"' ConsoleWrite($sGPOCmd & @CRLF) ;Turn off redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(False) Local $iPIDGPOCmd = Run($sGPOCmd, @SystemDir, @SW_HIDE, $STDERR_MERGED) ProcessWaitClose($iPIDGPOCmd) ;Turn on redirection for a 32-bit script on 64-bit system. If @OSArch = "X64" And Not @AutoItX64 Then _WinAPI_Wow64EnableWow64FsRedirection(True) Local $sGPOCmdOutput = StringStripWS(StdoutRead($iPIDGPOCmd), 3) ;~ ConsoleWrite($sGPOCmdOutput & @CRLF & @CRLF) ;For testing. If $sGPOCmdOutput <> "" Then SetError(3, 0, False) Return True EndFunc ;==>_AD_GetGPOReportByGuidPS  
      Adam
       
×
×
  • Create New...