Sign in to follow this  
Followers 0
TheDcoder

How to stop a case without exiting

16 posts in this topic

Hello!,

I need some help with this

Case $start
                If FileExists('e\documents\' & $file) = 0
                    Msg(0, "", Error!!")
                    Exit ;Replace this with any thing which does not close the program
                EndIf

AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

#2 ·  Posted (edited)

Please have a look at keyword "ContinueCase"

Edited by water
1 person likes this

My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

Thanks!! :)


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

TheDcoder, we're all about helping - but I notice most of your posts result in a suggestion of "Please look at <function name> in the Help File". Perhaps if you take some time to actually read through it, you'll save yourself some time.


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites

... and it saves us some time as well ;)


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

BTW, continuecase is probably NOT what you want to use in this instance. What continuecase does is it causes the code in the next Case statement to run without testing whether that Case statement is true or not and aborting the currently running Case statement's code.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

A circumvention: Using case xx twice in conjunction with continuecase.

Works as exitcase.

$i = InputBox("Case test", "Enter 1, 2 or 3", 2)
Switch $i
    Case 1
        MsgBox(64, "Case 1 selected", "Case 1  Press OK to exit", 0)
    Case 2
        If 2 = MsgBox(1 + 32 + 256, "Case 2 selected", "Case 2  Press CANCEL to break the case", 0) Then ContinueCase
        MsgBox(64, "Case 2 selected", "Case 2 was NOT interrupted", 0)
    Case 2 ; same case as above with no operation
    Case 3
        MsgBox(64, "Case 3 selected", "Case 3  Press OK to exit", 0)
    Case Else
        MsgBox(16, "Wrong Input entered", "Wrong input. Press OK to exit", 0)
EndSwitch

My UDFs, Abbrevs and Snippets
If you like my post, just click the like button :) 

Share this post


Link to post
Share on other sites

#8 ·  Posted (edited)

Create a infinite loop and use EndLoop() where needed......

In This Case:

Case $start
                While 1
                    If FileExists('e\documents\' & $file) = 0
                        Msg(0, "", Error!!")
                        EndLoop()
                    EndIf
                    ; Add Remaining code here
                WEnd

;)

Edited by TheDcoder

AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

That code doesn't exactly answer your problem. The way it's written you won't even need either the loop or the endloop. Your code is missing a lot of something in between the Endloop and the EndIf, because that If statement ends after the MsgBox anyways.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

@BrewManNH The code snippet is a small part of my program


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

Then you shouldn't have posted it, because it doesn't fix the issue you're talking about in the first post at all, as written. Post something where that would actually work better than what has been suggested already, and that bears some resemblance to your actual script.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Create a infinite loop and use EndLoop() where needed......

In This Case:

Case $start
                While 1
                    If FileExists('e\documents\' & $file) = 0
                        Msg(0, "", Error!!")
                        EndLoop()
                    EndIf
                WEnd

;)

 

So, you want to create an infinite loop to break yourself out of a loop? :huh2:

Remind me never to buy software written by you. ;)


√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites

@JLogan3013 Well, its free  :P


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

#14 ·  Posted (edited)

No one suggested using ContinueLoop ?

is it because I did not understand correctly what the user asks?

Edited by gil900

Share this post


Link to post
Share on other sites

Check post #2.


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

#16 ·  Posted (edited)

Check post #2.

Some time ago I checked it myself and I saw exactly what BrewManNH said at #6.

But, the user said thank you so there are two options:

1) he didn't tested it

2) he really need that that what BrewManNH described at #6 will happen

Edited by gil900

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • computergroove
      By computergroove
      I've made a form in Koda where I make a list of 3 user definable elements that I want to be able to replicate with a button press so a user can add data that can be used as part of the program. 
      #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #Region ### START Koda GUI section ### Form=D:\Carbonite Important\0 - Programing\Scite and Autoit\Koda 1.7.3.0\Forms\Mileage Estimator.kxf $Form1 = GUICreate("Save Project", 614, 1126, 298, 141) $Location = GUICtrlCreateInput("Location", 40, 112, 345, 21) $Distance = GUICtrlCreateInput("Distance", 400, 112, 89, 21) $AddLocation = GUICtrlCreateButton("AddLocation", 288, 80, 97, 25) $Label1 = GUICtrlCreateLabel("Location", 40, 88, 45, 17) $Label2 = GUICtrlCreateLabel("Distance", 400, 88, 46, 17) $HomeBase = GUICtrlCreateInput("HomeBase", 312, 32, 121, 21) $LeapYear = GUICtrlCreateCheckbox("LeapYear", 464, 32, 17, 17) $Label3 = GUICtrlCreateLabel("Leap Year?", 488, 32, 59, 17) $Variance = GUICtrlCreateInput("Variance", 504, 112, 81, 21) $Label4 = GUICtrlCreateLabel("Variance", 504, 88, 46, 17) $Label5 = GUICtrlCreateLabel("Home Base", 312, 8, 59, 17) $Button1 = GUICtrlCreateButton("Button1", 144, 56, 1, 57) $Save = GUICtrlCreateButton("Save Project", 40, 16, 121, 25) $Load = GUICtrlCreateButton("Load Project", 176, 16, 121, 25) GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Form1 Case $AddLocation EndSwitch WEnd I want to press the "add location" button and have the fields {Location, Distance and variance} create a new blank record located under the existing 3 input boxes. Since the fields can number over 30 locations in some examples I am thinking about having these items in a scrolling window. What is the best way to do this and can auto it add a variable while running by pressing a button?
    • XaelloNegative
      By XaelloNegative
      Hi,
      I made a small blunder with my code. I created the GUI under 1920x1080 resolution however, my user is configured to ONLY 1080x720 and cannot go any further than that.
      What do you guys think is the best way to correct this one? Resolution mathematics is something that came to mind however I do not have access to his PC to check  from time to time if  my estimation is correct and the resolution on my PC doesn't go down to 1080x720.
      Please help.
      ~XN~
    • davidacrozier
      By davidacrozier
      Hello all ~
      I am running an autoit script on Windows 10 inside VMware Workstation 12 Pro version 12.5.2.  Technically I am remoting into ESXi which has a Domain Controller (DC), WebServer, FilServer, Windows 10, etc.  Using the GUI (i.e. running explorer.exe) I am able to open several different folders successfully.  The desktop, documents, USB external all open without issue.  The network share opening gives me issues.  Whenever I attempt to open \\filserver\users\user\sharedfolder I get the documents folder instead.  I understand that the documents folder is the default for explorer.  I have also attempted to use the letter drive mapped to the network share (Z:) and receive the same result.  When I run this script on Windows 10 alone without  the VM or the ESXi I am able to open the network share without problems.  I have tried to use the net use command to designate a letter M: to the network share folder prior to running the script.  This did not work for me.  
      One additional avenue I think might work is to use the systreeview321 and _GUICtrlTreeView_FindItem to step through the tree looking for the network share.  Once found,  double click on it and see if that opens the shared network folder.  I can click inside the VM with my mouse on the network share and it opens just fine.  Not sure if running up against GUI issues, or permission issues, or what?
      Thanks in advance,
      Davida Crozier
      TestNetworkShare.au3
      This script is a subset of a much larger program, but it illustrates what I am dealing with.

    • superflq
      By superflq
      Hi everyone,
      GUICtrlSetState Function example ,i found $GUI_DROPACCEPTED isn't working in windows10 x64(windows_10_enterprise_2016_ltsb_x64).
      if the example put to windows10 x86 or windows xp, the $GUI_DROPACCEPTED is effective,
      the AutoIt Edition is v3.3.14.2.
      any ideas? thanks you.
       
      #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> Example() Func Example() ; Create a GUI with various controls. Local $hGUI = GUICreate("Example", 420, 200, -1, -1, -1, $WS_EX_ACCEPTFILES) ; Create a label and set the state as drop accepted. Local $idLabel = GUICtrlCreateLabel("Drop a file on this label.", 10, 10, 400, 40, $WS_BORDER) GUICtrlSetState($idLabel, $GUI_DROPACCEPTED) ; Create an input and set the state as drop accepted. Local $idInput = GUICtrlCreateInput("", 10, 60, 400, 22) GUICtrlSetState($idInput, $GUI_DROPACCEPTED) Local $idOK = GUICtrlCreateButton("OK", 310, 170, 85, 25) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idOK ExitLoop Case $GUI_EVENT_DROPPED ; If the value of @GUI_DropId is $idLabel, then set the label of the dragged file. If @GUI_DropId = $idLabel Then GUICtrlSetData($idLabel, @GUI_DragFile) EndSwitch WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>Example  
    • MrCheese
      By MrCheese
      Hey Guys,
       
      So, the functions work, where primarygui() accurately determines the evaluation of the status of the checkboxes - the msgbox picks this up.
       
      However, later on, when we re-enter a 'for $i = 0 to ubound($checkbox)' loop, then in the 'batchinitial' function it doesn't picked up that the status&$i = 1, so it jumps out, then within the While 1 loop, it exits the loop in the first row, again because the status& $i= 0
      The "assign" line within the primarygui funtion, is this only a local assignment? if so, how can I make it cross function?
       
      Thank in adv for your help
       
       
      Func excelsheetlist() $i = 0 Global $aWorkSheets = _Excel_SheetList($oWorkbook1) If @error Then Exit MsgBox($MB_SYSTEMMODAL, "Excel UDF: _Excel_SheetList Example 1", "Error listing Worksheets." & @CRLF & "@error = " & @error & ", @extended = " & @extended) ;_ArrayDisplay($aWorkSheets, "Excel UDF: _Excel_SheetList Example 1") ;_ArrayDisplay($aWorkSheets, "Array") Global $iRows = UBound($aWorkSheets, $UBOUND_ROWS) ; Total number of rows. In this example it will be 10. Global $iCols = UBound($aWorkSheets, $UBOUND_COLUMNS) ; Total number of columns. In this example it will be 20. Global $iDimension = UBound($aWorkSheets, $UBOUND_DIMENSIONS) ; The dimension of the array e.g. 1/2/3 dimensional. MsgBox($MB_SYSTEMMODAL, "", "The array is a " & $iDimension & " dimensional array with " & _ $iRows & " row(s) & " & $iCols & " column(s).") Dim $checkbox[$iRows] EndFunc ;==>excelsheetlist Func primarygui() ; Create a GUI with various controls. Local $hGUI = GUICreate("Script Controller", 300, ($iRows * 24)) ; Create a checkbox control. ;Local $idCheckbox = GUICtrlCreateCheckbox("Standard Checkbox", 10, 10, 185, 25) Local $Button2 = GUICtrlCreateButton("Close", 210, 200, 85, 25) Local $Button3 = GUICtrlCreateButton("Run", 210, 170, 85, 25) Local $Button1 = GUICtrlCreateButton("Discharge", 210, 140, 85, 25) For $i = 0 To UBound($checkbox) - 1 $checkbox[$i] = GUICtrlCreateCheckbox($aWorkSheets[$i][0], 8, 0 + ($i * 24)) ;, 81, 17) Next ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Loop until the user exits. While 1 $nMsg = GUIGetMsg() Select Case $nMsg = $GUI_EVENT_CLOSE Exit Case $nMsg = $Button2 ;Close Exit Case $nMsg = $Button1 MsgBox(0, "Discharge Button not configured", "Now Exiting") Exit Case $nMsg = $Button3 ;Run $fSelection = False For $i = 0 To UBound($checkbox) - 1 If BitAND(GUICtrlRead($checkbox[$i]), $GUI_CHECKED) Then $fSelection = True ExitLoop EndIf Next If $fSelection Then For $i = 0 To UBound($checkbox) - 1 Assign("status" & $i, GUICtrlRead($checkbox[$i])) Next $batchcount = 0 For $i = 0 To UBound($checkbox) - 1 If Eval("status" & $i) = 1 Then $batchcount = $batchcount + 1 ;Call ("o" & $i & "copy") ; if you want to call the functions directly, remove ; before the call and comment or delete the following DirCopy statement MsgBox(0, "Checking", "Checking that: " & $checkbox[$i] & " no, with title: " & $aWorkSheets[$i][0] & " was selected, Batch count: " & $batchcount) ; if you need only the DirCopy EndIf Next ExitLoop Else MsgBox(48, 'No Items Selected', 'You have not selected any Patients to Load, Please select from the list') EndIf EndSelect WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc ;==>primarygui Func _IsChecked($idControlID) Return BitAND(GUICtrlRead($idControlID), $GUI_CHECKED) = $GUI_CHECKED EndFunc ;==>_IsChecked Func batchinitial() If Eval("status" & $i) = 1 Then debugbox() $oWorkbook1.Sheets(1).Activate $bigloop = $bigloop + 1 $sheet = $aWorkSheets[$i][0] $oWorkbook1.Sheets($sheet).Activate debugbox() EndIf EndFunc ;==>batchinitial OpenExcel() excelsheetlist() primarygui() For $i = 0 To UBound($checkbox) - 1 batchinitial() While 1 If Eval("status" & $i) = 0 Then ExitLoop ;all the rest of my script loops etc WEnd Next