Jump to content
RaiNote

Just A Problem don't know how to name it^^

Recommended Posts

RaiNote

Well Hello,

I currently a bit sad because i can't find anywhere in helpfiles and google away in autoit to check if a number between another number is the same as 4 variables which is checking if the main variable got the same princip of looking >.<.( I really can't explain it at all)

Case $Send2Box
            $ReadText2Box = GuictrlRead($Text2Box)
            _GUICtrlEdit_AppendText($Console, $ReadText2Box & @CRLF)
            If $ReadText2Box = '/ping ' & $ip1 & '.' & $ip2 & '.' & $ip3 & '.' & $ip4 Then
                $IP = StringRight('/ping ', 1)
                $Ping = Ping($IP)
                _GUICtrlEdit_AppendText($Console,'Ping is: ' & $Ping & 'ms')
                GUICtrlSetData($Text2Box,'')
            EndIf

Next try to explain ^-^ i want to check if the text in the inputbox($Text2Box which is read from $ReadText2Box) the same looking like a ip but with a '/ping ' before and i don't know how to make the variables to check this.. and getting after it checked that it is truly a IP to ping it and send it to $Console to display the ms

I hope i could explained it anyway to understand it(if i write more i am getting more confused)

Thanks to everyone who try's to help me :D


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
Jfish

This looks like you are pinging the letter g which is what StringRight('/ping',1) will return.

$IP = StringRight('/ping ', 1)
                $Ping = Ping($IP)

I think you want to to ping:

$ip1 & '.' & $ip2 & '.' & $ip3 & '.' & $ip4

From what I can tell maybe the issue is that you are reading an IP address from the textbox that starts with "/ping".  If you want to remove that you could just trim it off from $ReadTextBox2.  StringTrimLeft is how you could chop off those characters. $IP=StringTrimLeft($ReadTextBox2,5).  That is all a guess based on what I think I read in your post.


Build your own poker game with AutoIt: pokerlogic.au3 | Learn To Program Using FREE Tools with AutoIt

Share this post


Link to post
Share on other sites
SadBunny

The StringRight call as you have it there just returns the rightmost character of "/ping ", which is a space.

Change

$IP = StringRight('/ping ', 1)

to

$IP = StringTrimLeft($ReadText2Box, 6)

It will trim 6 characters from the $RestText2Box, exactly the length of string "/ping ", and return the result, which should be your IP address.


Roses are FF0000, violets are 0000FF... All my base are belong to you.

Share this post


Link to post
Share on other sites
RaiNote

But i want also to test if $IP which is after '/ping ' looks like an IP xxx.xxx.xxx.xxx which i tried with $ip1 $ip2.. but it won't work out

 


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
SadBunny

What's in your $ip1, $ip2...? Judging from your current code it looks like you are checking whether it is a specific IP-address, defined in your $ip1 etc.. If you mean you want to check if the thing after "/ping " ($IP) is a string in the format of "<0-255>.<0-255>.<0-255>.<0-255>", you can take multiple approaches. One is to write a function to split $IP into parts using "." as a delimiter, then checking whether you get 4 results, each being a number between 0 and 255. Like so:

ConsoleWrite(_isIpAddress("abc") & @CRLF)
ConsoleWrite(_isIpAddress("12.34.56.78.90") & @CRLF)
ConsoleWrite(_isIpAddress("999.999.999.999") & @CRLF)
ConsoleWrite(_isIpAddress("127.0.0.1") & @CRLF)

Func _isIpAddress($IP)

    $splitResult = StringSplit($IP, ".")

    If $splitResult[0] <> 4 Then Return False
    For $supposedNumber In $splitResult
        If $supposedNumber < 0 Or $supposedNumber > 255 Then Return False
    Next
    Return True
EndFunc   ;==>_isIpAddress

 


Roses are FF0000, violets are 0000FF... All my base are belong to you.

Share this post


Link to post
Share on other sites
RaiNote

Thank you very much. *-*

but still i am bit stucked xD but that's just to check which command i wrote ^^

 

Edited by RaiNote

  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
RaiNote

Hello,

I got a problem with my Code. Only GUI code works out but when i use with all my Functions the Gui goes down to the endless >.<

Code:

;*****************************************
;CraTool.au3 by RaiNote
;Erstellt mit ISN AutoIt Studio v. 0.98 BETA
;*****************************************


;Includes
#include <GUIConstantsEx.au3>
#include <GuiEdit.au3>
#include <String.au3>
#include "Forms\CraTool.isf"
#include "Functions.au3" 
#include <Inet.au3>
#include <_UskinDLL.au3>
#include <_UskinLibrary.au3>
#include <Skins\Descent.au3>
;Includes

_Uskin_LoadDLL()
_USkin_Init(_Descent(True))

;Variablen


GUISetState(@SW_SHOW, $CraTool)

While 1
    
    $nMsg = GUIGetMsg()
    Switch $nMsg
        
        Case $GUI_EVENT_CLOSE
            Exit
            
        Case $Send2Box
            
            ;Some Main needs for Commands
            $ReadText2Box = GuictrlRead($Text2Box)
            $IP = StringTrimLeft($ReadText2Box, 6)
            $IsIP = _isIpAddress($IP)
            $IP2 = StringTrimLeft($ReadText2Box, 4)
            $IsDomain = _isIpAddress($IP)
            $CheckCom4Digits = StringLeft($ReadText2Box,5)
            $CheckCom2Digits = StringLeft($ReadText2Box,3)
            _GUICtrlEdit_AppendText($Console, $ReadText2Box & @CRLF)
            ;
            
            If $CheckCom4Digits = '/ping' Then
                
                If $IsIP = 1 Then
                $Ping = Ping($IP)
                _GUICtrlEdit_AppendText($Console,'Ping is: ' & $Ping & 'ms' & @CRLF)
                
                ElseIf $IsIP = 0 Then
                    $PingDom = Ping($IP)
                    
                    If $PingDom > 0 Then
                    _GUICtrlEdit_AppendText($Console,'Ping is: ' & $PingDom & 'ms' & @CRLF)
                    
                    Else
                    _GUICtrlEdit_AppendText($Console,$IP & " isn't a valid IP" & @CRLF)
                    EndIf
                    
                EndIf
                
            EndIf
            
            If $CheckCom2Digits = '/ip' Then
                
                If $IsDomain = 0 Then
                    $IpGet = TCPNameToIP($IP2)
                _GUICtrlEdit_AppendText($Console,'IP is: ' & $IpGet & @CRLF)
                    
                ElseIf $IsDomain = 1 Then
                    $DomainGet = _TCPIpToName($IP2)
                    _GUICtrlEdit_AppendText($Console,$IP2 & ' is already an IP' &  @CRLF)
                    _GUICtrlEdit_AppendText($Console,$DomainGet & @CRLF & '->Domain of ' & $IP2 & @CRLF)
                EndIf
                
            EndIf
            GUICtrlSetData($Text2Box,'')
        Case $LoupCom
            _GUICtrlEdit_AppendText($Console, 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIII' & @CRLF & 'vvvvvvvvvvvvvvvvvvvvvvvvvvvvvv' & @CRLF & 'Command: Ping' & @CRLF & 'Usage-> /ping Ip or Domain' & @CRLF & 'Info-> It shows the time it takes to connect from your Computer to another.' & @CRLF)
            
    EndSwitch

WEnd

GUI:

#include-once

; -- Created with ISN Form Studio 2 for ISN AutoIt Studio -- ;
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#Include <GuiButton.au3>
#include <EditConstants.au3>
#Include <GuiMenu.au3>

$CraTool = GUICreate("CraTool",618,386,-1,-1,-1,-1)
$MenuItem681 = GUICtrlCreateMenu("Plugins")
$PluginsEnableMenu = GUICtrlCreateMenuItem("Enable",$MenuItem681,-1,1)
$PluginsDisableMenu = GUICtrlCreateMenuItem("Disable",$MenuItem681,-1,1)
$Send2Box = GUICtrlCreateButton("Send",413,323,60,19,-1,-1)
$Console = GUICtrlCreateEdit("",413,0,198,303,2244,-1)
GUICtrlSetFont(-1,8,400,0,"Lucida Console")
GUICtrlSetColor(-1,"0x0000A0")
GUICtrlSetBkColor(-1,"0x00FF80")
$Text2Box = GUICtrlCreateInput("Text to Box",413,303,194,20,192,512)
$LoupCom = GUICtrlCreateButton("Lookup Commands",473,323,100,19,-1,-1)
GUISetState(@SW_SHOW,$CraTool)

Functions:

;Functions.au3

Func _isIpAddress($IP)

    $splitResult = StringSplit($IP, ".")

    If $splitResult[0] <> 4 Then Return False
    For $supposedNumber In $splitResult
        If $supposedNumber < 0 Or $supposedNumber > 255 Then Return False
    Next
    Return True
EndFunc   ;==>_isIpAddress

That's all i can provide as code but i really don't get where the problem is. Maybe it's my Laptop because before on my computer it worked fine everything. ^^

I hope someone could help me :3

Thanks to everyone ^-^

Edit: Wups wrong section just saw it right now sorry If someone could move would be nice^^

Edited by RaiNote
Wrong Section

  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
RaiNote

The Problem could be the Skin but why? °^°

 


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
Jfish

Are you trying to look at a string and see if it is formatted as an IP address?  xxx.xxx.xxx.xxx?  If so, have a look at StringRegExp to test for a pattern.  If that is not what you are after maybe you could post in your native language as something may be getting lost in translation (or use Google translate to explain).

  • Like 1

Build your own poker game with AutoIt: pokerlogic.au3 | Learn To Program Using FREE Tools with AutoIt

Share this post


Link to post
Share on other sites
RaiNote

Just to test if it looks like xxx.xxx.xxx.xxx but currently everything works without Uskin ^^ it destroys anyway my GUI Y-axis it ends somewhere in the nowhere^^

 


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
RaiNote

if the endborder goes beyound your taskbar where you can't see it also if u try to pull it to the top

 


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
RaiNote

complete Code and i know wrong section but i saw it to late e.e


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
RaiNote

exactly the same

 


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
RaiNote

and it looks it's due the skin but i don't get why >.< on my other Programs it work and a hour before it worked also


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites
Jos

@RaiNote, Threads are merged and hope you will stick to one single thread for the same question from here on.

Believe this is "strike two" today.

Jos


Visit the SciTE4AutoIt3 Download page for the latest versions  - Beta files                                How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
Jfish

@RaiNote:  you are posting snippets of your code - that would very hard (at least for me - maybe others have a better opinion) to test and figure out the problem.  If you don't want to post the entire code can you create a simple "reproducer" script that shows the exact issue with working code?


Build your own poker game with AutoIt: pokerlogic.au3 | Learn To Program Using FREE Tools with AutoIt

Share this post


Link to post
Share on other sites
RaiNote

I know right now the Problem so i would like if someone could Lock/close this and the other thread^^

And Thanks to everyone.


  • C++/AutoIt/OpenGL Easy Coder
  • I will be Kind to you and try to help you
  • till what you want isn't against the Forum
  • Rules~

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • nacerbaaziz
      By nacerbaaziz
      Hello Members of this best Forum
      i have a question please
      for example if i have a long string
      and i want to extract a text between two tag
      what i can do to make that?
      note :
      i know that there is a
      StringRegExp function
      it's do that work
      but it result is be as an array
      i want the result to be a string
      is there any function on autoit can do that?
      Thanks in advance.
    • mistersquirrle
      By mistersquirrle
      Hello!
       
      I wrote myself a script to follow Google Maps Polyline encoding steps: https://developers.google.com/maps/documentation/utilities/polylinealgorithm, and that works (although I think that it's a bit janky), but now I'm having issues getting the output.
       
      When I run the script, all the points come out correctly in the console, and even when they're the only things that I log, it displays them fine. However, I'm adding each point into a variable to return all of them at once at the end, fully formatted, and it's only taking the very first point. I can't figure out what I'm doing wrong, as it seems fine.
       
      When run with the default value, it should output this at the end: Custom Polygon: _p~iF~ps|U_ulLnnqC_mqNvxq`@
      But instead I'm just getting this: Custom Polygon: _p~iF
       
      I know that it's reaching the string combination lines because it's logging the data before it (and even if a put log AFTER the $sPolygon &= $aPoints[0], it's logged fine).
       
      Here's my full code (problem is lines ~209 - 234, search "$sPolygon &= $aPoints[1]"):
      #include <Array.au3> #include <ButtonConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> _PolyGUI() Func _PolyGUI() #Region ### START Koda GUI section ### Form= $hInputGUI = GUICreate("Lat Long encoder", 403, 301, 192, 124) GUISetFont(8, 400, 0, "Consolas") GUICtrlCreateLabel("Input polygon points here, format as:", 8, 8, 263, 19) GUICtrlSetFont(-1, 10, 800, 0, "Consolas") GUICtrlCreateLabel("Lat Long - Single point", 8, 24, 142, 17) GUICtrlCreateLabel("Lat Long, Lat Long, Lat Long - Multiple points", 8, 40, 280, 17) Local $sPoints = GUICtrlCreateEdit("", 8, 64, 385, 201, BitOR($ES_WANTRETURN, $WS_VSCROLL)) GUICtrlSetData(-1, "38.5 -120.2, 40.7 -120.95, 43.252 -126.453") GUICtrlSetFont(-1, 10, 400, 0, "Consolas") $bOK = GUICtrlCreateButton("bOK", 16, 272, 123, 25) GUICtrlSetFont(-1, 12, 800, 0, "Consolas") $bCancel = GUICtrlCreateButton("bCancel", 304, 272, 75, 25) GUICtrlSetFont(-1, 12, 800, 0, "Consolas") GUISetState(@SW_SHOW, $hInputGUI) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $bCancel Exit Case $bOK $sPoints = GUICtrlRead($sPoints) GUISetState(@SW_HIDE, $hInputGUI) _GetPoly($sPoints, True) ExitLoop EndSwitch Sleep(10) WEnd EndFunc ;==>_PolyGUI ;https://developers.google.com/maps/documentation/utilities/polylinealgorithm ;https://app.dsmobileidx.com/api/DescribeSearchForLinkId?linkId=469787 ; Note that this will only really work inside the US (this side of the World), as it's assuming any negative is the Longitude ;https://gist.github.com/ismaels/6636986 - decoder ;Using: 41.83162 -87.64696 ; Expected: sfi~F np}uO ; Actual: sfi~f np}uo ; If we remove 32 from the last ASCII code, since the last bit chunk is 0, we get the correct case/ characters ; We need to run this logic back through all the indexes though and do this to all that that <= 63 ;LinkId=469787 ; Expected: q{`aHpa_iVi[kp@}`Aa{@e[eCoqBbAyc@iRy{@g_@mz@|gA{eAh~@Vf~Etv@gB~p@gQ`^yg@~p@ekAldA{KfFxIrJ^pO~Mtl@dPrJnUz[nSpo@wf@fc@yw@n@ob@ ; Actual: s{`aHpa_iVg[kp@}`Aa{@g[gCmqBbA{c@iRy{@e_@kz@|gA{eAh~@Td~Evv@gB|p@gQb^wg@|p@ekAndA{KfFvIpJ`@rO~Mrl@dPrJnU|[lSpo@wf@dc@yw@n@mb@ ; I assume that this is because of bad data, the points have repeating 9's and 0's, which looks fishy. The polygon is (very) close, but not quite the same. Func _GetPoly($sPoints, $bLog = False) Local $timer = TimerInit(), $sConsole[11] Local $sPolygon = "" ; Step 1, take the initial signed value: Local $aCoords = StringRegExp($sPoints, "(-*?\d*\.\d*) (-*?\d*\.\d*)", 3), $aPoints[2] ;~ _ArrayDisplay($aCoords) If $bLog Then _Log(_ArrayToString($aCoords)) For $c = 0 To (UBound($aCoords) - 1) Step 2 ;~ If $bLog Then _Log($c) If $c = 0 Then $aPoints[0] = $aCoords[$c] $aPoints[1] = $aCoords[$c + 1] Else $aPoints[0] = $aCoords[$c] - $aCoords[$c - 2] $aPoints[1] = $aCoords[$c + 1] - $aCoords[$c - 1] EndIf If $bLog Then _Log("- Step 1, take the initial signed value:") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 2, multiply each by 1e5, and round $aPoints[0] = Round($aPoints[0] * 1e5, 0) $aPoints[1] = Round($aPoints[1] * 1e5, 0) If $bLog Then _Log("- Step 2, multiply each by 1e5, and round") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 3, convert Decimal to Binary, using two's complement for negatives. Padded to 32 bits $aPoints[0] = _NumberToBinary($aPoints[0]) $aPoints[1] = _NumberToBinary($aPoints[1]) If $bLog Then _Log("- Step 3, convert Decimal to Binary, using two's complement for negatives. Padded to 32 bits") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 4, left-shifted 1 bit $aPoints[0] = StringTrimLeft($aPoints[0], 1) & "0" $aPoints[1] = StringTrimLeft($aPoints[1], 1) & "0" If $bLog Then _Log("- Step 4, left-shifted 1 bit") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf ; Step 5, if negative, invert binary If $c = 0 Then If $aCoords[$c] < 0 Then $aPoints[0] = _InvertBinary($aPoints[0]) If $aCoords[$c + 1] < 0 Then $aPoints[1] = _InvertBinary($aPoints[1]) Else If $aCoords[$c] - $aCoords[$c - 2] < 0 Then $aPoints[0] = _InvertBinary($aPoints[0]) If $aCoords[$c + 1] - $aCoords[$c - 1] < 0 Then $aPoints[1] = _InvertBinary($aPoints[1]) EndIf If $bLog Then _Log("- Step 5, if negative, invert binary") _Log(" " & $aPoints[0]) _Log(" " & $aPoints[1]) EndIf Local $aChunks[2][6], $0x20 For $i = 0 To 1 $0x20 = "1" ; This is out BitOR flag, 0x20 BitOR'd onto our 5-bit chunks is always 1*****, except the last chunk $sConsole[5] = "" ; Clearing console variables $sConsole[6] = "" $sConsole[7] = "" $sConsole[8] = "" $sConsole[9] = "" For $j = 0 To 5 ;There will always be 6 chunks ; Step 6 & 7, break into 5-bit chunks, and reverse order $aChunks[$i][$j] = StringTrimLeft($aPoints[$i], StringLen($aPoints[$i]) - 5) ; This splits into 5-bit chunks in reverse order, doing 6 & 7 in one operation ;~ If $bLog Then _Log(" " & $aPoints[$i]) ;~ If $bLog Then _Log(" " & StringLen($aPoints[$i])) ;~ If $bLog Then _Log(" " & StringTrimLeft($aPoints[$i], StringLen($aPoints[$i]) - 5)) ;~ If $bLog Then _Log(" " & $aChunks[$i][$j]) ; Here we consume the original binary string, so the next loop gets the correct next 5-bit chunk $aPoints[$i] = StringTrimRight($aPoints[$i], 5) $sConsole[5] &= $aChunks[$i][$j] & " " ; Once consumed, if the remaining length isn't enough for another bit chunk, switch 0x20 to 0 (no following chunks) If StringLen($aPoints[$i]) <= 5 Then $0x20 = "0" ; Step 8, BitOR 100000 (0x20) to our 5-bit chunks (effectively) $aChunks[$i][$j] = $0x20 & $aChunks[$i][$j] $sConsole[7] &= $aChunks[$i][$j] & " " ; Step 9, converting the chunk from Binary back to Decimal $aChunks[$i][$j] = _BinaryToDec($aChunks[$i][$j]) $sConsole[8] &= $aChunks[$i][$j] & " " ; Step 10, adding 63 to decimal values $aChunks[$i][$j] += 63 $sConsole[9] &= $aChunks[$i][$j] & " " If StringLen($aPoints[$i]) < 5 Then ExitLoop Next If $bLog Then _Log("- Step 6 & 7 (part " & $i & "), break into 5-bit chunks, and reverse order") _Log(" " & $sConsole[5]) _Log("- Step 8 (part " & $i & "), BitOR 100000 (0x20) to our 5-bit chunks (effectively)") _Log(" " & $sConsole[7]) _Log("- Step 9 (part " & $i & "), converting the chunk from Binary back to Decimal") _Log(" " & $sConsole[8]) _Log("- Step 10 (part " & $i & "), adding 63 to decimal values") _Log(" " & $sConsole[9]) EndIf Next Local $aASCII[0] For $i = 0 To 1 Dim $aASCII[0] ; Reset ASCII array For $j = 0 To (UBound($aChunks, 2) - 1) ; For both chunk sets ReDim $aASCII[UBound($aASCII) + 1] ; Add an index for the ASCII array If $aChunks[$i][$j] = "" Or $aChunks[$i][$j] <= 63 Then ; If the chunk is not useful $l = $j For $k = $l To 1 Step -1 If $aChunks[$i][$k] = "" Or $aChunks[$i][$k] <= 63 Or $aASCII[$k] <= 63 Then $aASCII[$k - 1] -= 32 If $aASCII[$k - 1] <= 63 Then _ArrayDelete($aASCII, $k - 1) Else ExitLoop EndIf Next ExitLoop EndIf $aASCII[$j] = Int($aChunks[$i][$j]) Next ;Step 11, convert each value to ASCII equivalent For $k = UBound($aASCII) - 1 To 0 If $aASCII[$k] <= 63 Or $aASCII[$k] = "" Then ReDim $aASCII[UBound($aASCII) - 1] Else ExitLoop EndIf Next $aPoints[$i] = StringFromASCIIArray($aASCII, 0, -1, 0) Next If $bLog Then _Log("- Step 11, convert each value to ASCII equivalent, finished") If $aCoords[$c] <= 0 Then ;@CRLF & " " & If $bLog Then _Log($aPoints[1]) _Log($aPoints[0]) _Log("Next set") EndIf $sPolygon &= $aPoints[1] $sPolygon &= $aPoints[0] Else If $bLog Then _Log($aPoints[0]) _Log($aPoints[1]) _Log("Next set") EndIf $sPolygon &= $aPoints[0] $sPolygon &= $aPoints[1] EndIf Next If $bLog Then _Log("Custom Polygon: " & $sPolygon) _Log(TimerDiff($timer) & @CRLF) EndIf Return $sPolygon EndFunc ;==>_GetPoly Func _NumberToBinary($iNumber) Local $sBinString = "" ; Maximum 32-bit # range is -2147483648 to 2147483647 If $iNumber < -2147483648 Or $iNumber > 2147483647 Then Return SetError(1, 0, "") ; Convert to a 32-bit unsigned integer. We can't work on signed #'s $iUnsignedNumber = BitAND($iNumber, 0x7FFFFFFF) ; Cycle through each bit, shifting to the right until 0 Do $sBinString = BitAND($iUnsignedNumber, 1) & $sBinString $iUnsignedNumber = BitShift($iUnsignedNumber, 1) Until Not $iUnsignedNumber ; Was it a negative #? Put the sign bit on top, and pad the bits that aren't set If $iNumber < 0 Then Return '1' & StringRight("000000000000000000000000000000" & $sBinString, 31) ; Always return 32 bit binaries If StringLen($sBinString) < 32 Then Return StringRight("0000000000000000000000000000000" & $sBinString, 32) Return $sBinString EndFunc ;==>_NumberToBinary Func _BinaryToDec($sBinary) Local Const $aPower[8] = [128, 64, 32, 16, 8, 4, 2, 1] Local $iDec If StringRegExp($sBinary, "[0-1]") Then If StringLen($sBinary) < 8 Then Do $sBinary = "0" & $sBinary Until StringLen($sBinary) = 8 EndIf $aBinary = StringSplit($sBinary, "", 2) For $i = 0 To UBound($aBinary) - 1 ;~ $aBinary[$i] = $aBinary[$i] * $aPower[$i] $iDec += $aBinary[$i] * $aPower[$i] Next Return $iDec Else Return SetError(0, 0, "Not a binary string") EndIf EndFunc ;==>_BinaryToDec Func _InvertBinary($iNumber) ;~ ConsoleWrite(@CRLF & $iNumber) Local $sNumber $aNumber = StringSplit($iNumber, "") For $i = 1 To $aNumber[0] If $aNumber[$i] = 0 Then $aNumber[$i] = 1 ElseIf $aNumber[$i] = 1 Then $aNumber[$i] = 0 Else Return SetError(0, 0, "Not a binary number") EndIf $sNumber &= String($aNumber[$i]) Next Return $sNumber EndFunc ;==>_InvertBinary Func _Log($data) ;~ Local Static $LogEnable = True ConsoleWrite(@CRLF & @HOUR & ":" & @MIN & "." & @SEC & " " & $data) LogData(@HOUR & ":" & @MIN & "." & @SEC & " " & $data, "logs/LOGFILE.txt") EndFunc ;==>_Log Func LogData($text, $File = "logs/LOGFILE.txt") Global $LogFile = "" If $LogFile = "" Then $LogFile = FileOpen($File, 9) OnAutoItExitRegister(CloseLog) EndIf FileWriteLine($LogFile, $text) EndFunc ;==>LogData Func CloseLog() If $LogFile <> "" Then _Log("Closing LoD script" & @CRLF) FileClose($LogFile) EndIf EndFunc ;==>CloseLog  
      I've tried:
      $sPolygon &= $aPoints[0] & $aPoints[1] ;---- $sPolygon = $sPolygon & $aPoints[0] & $aPoints[1] ;---- $sPolygon = $sPolygon & String($aPoints[0] & $aPoints[1]) ;---- $sPolygon = String($sPolygon) & String($aPoints[0]) & String($aPoints[1]) ;---- $sPolygon &= $aPoints[1] $sPolygon &= $aPoints[0] ;----  
      I'm sure it's something basic that I'm overlooking, but I don't understand why it's not combining the strings. 
      Also, unrelated, why doesn't $LogFile = FileOpen($File, 9) create the directory/ file if they don't exist? 9 should be $FO_CREATEPATH (8) + $FO_APPEND (1)?
      Thanks!
    • careca
      By careca
      This is another take on string triggers, triggers on specific strings.
      Able to simple text pasting,
      opening links (as long as there's a www. http:\\ or https:\\ at the beggining)
      and is able to open applications.
      The user selects the modifier key, and then uses a combination of that key with a couple others to perform tasks like
      screenshot the active window, (modkey + prtscr), turn off the screen (modkey + pause / break),
      open clipboard string in registry (modkey + R), change system volume (modkey + arrouw up/dn).
      The following keys pressed at the same time prompt for shutdown: S+D+T
      The following keys pressed at the same time prompt for restart: S+R+T
      Middle mouse button click on titlebar minimizes to tray, or a left mouse button click in the icon in the tray also minimizes.
      Trigger is set off by space or enter, and timeouts after 3 seconds.
      Shows your external, lan, and gateway ip's, can refresh with right mouse click, and opens the default browser if the correspondent button is pressed.
      Able to change system volume by a set percentage, reading from the inputbox the number the user sets, if 0 or empty uses system default.
      I made this because the existing string trigger applications didn't do it for me for a number of reasons.
      I did this for me, but if someone finds it useful all the better.
    • WoodGrain
      By WoodGrain
      Hi All,
      I'd like to replace 'COMMA' with ',' for example:
      $myString = "COMMA" StringRegExpReplace($myString, 'COMMA', ',') Now I've tried escaping the ',' in various ways unsuccessfully, such as:
      '[,]'
      "[,]"
      '\,'
      [,] seems to work in the pattern, I just can't figure out how to use it in the replace, and it seems everyone online is only interested in removing/replacing commas lol.
      I also tried creating and using a variable as the replacement but also didn't work:
      $myComma = "," $myString = "COMMA" StringRegExpReplace($myString, 'COMMA', $myComma) I'm sure it's super simple if someone could point me in the right direction - thanks.
    • kartune
      By kartune
      Hello, I am getting this error message when running my script:
      Case $aButiD[0] To $aButiD[$iTotButtons - 1]
      Case ^ ERROR
      Error:  Array variable has incorrect number of subscripts or subscript dimension range exceeded.
       
      The script's purpose is to read my ini file and create buttons for the sections and section contents.
      The first part of the script creates buttons for the sections of the ini, once you click on the section button it should open another set of buttons of all the contents under the section
      In this case, the section in the .ini file is called "TPA"
      on the Func flavorco()
      It opens the contents of "TPA" into buttons.
      Right now, the section it is reading is determined by $sSection.
      It is only when I try to change $sSection = "TPA"
      to
      $sSection = $flavorco
      that the error starts to appear
       
      Here is the script
      #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <Array.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <ButtonConstants.au3> $optbar = IniReadSectionNames("test.ini") If Not IsArray($optbar) Then Exit Local $Button[UBound($optbar) - 1] $mGUI = GUICreate('Restock Flavor Ingredients', 10 + (130 * UBound($optbar)), 100) For $x = 1 To UBound($optbar) - 1 $var = IniReadSection("test.ini", $optbar[$x]) If @error Then ContinueLoop $X_Coord = 10 + (($x - 1) * 100) $Button[$x - 1] = GUICtrlCreateButton($optbar[$x], $X_Coord, 30, 70, 30) Next GUISetState() While 1 $mMsg = GUIGetMsg() If $mMsg = $GUI_EVENT_CLOSE Then GUIDelete($mGUI) ExitLoop EndIf For $i = 0 To UBound($Button) - 1 If $mMsg = $Button[$i] Then MsgBox(0, '$Msg = ' & $mMsg, GuiCtrlRead($Button[$i]) & ' Pressed', 2) Global $flavorco = $Button ; sets the flavor company's variable Call('flavorco') EndIf Next WEnd Func flavorco() ;opened flavor company's flavors MsgBox(0, '$Msg = ' & $mMsg, GuiCtrlRead($Button[$i]) & $flavorco, 0) Local $sFilePath = @ScriptDir & "\Test.ini" Local $sSection = $Button Local $aArray = IniReadSection($sFilePath, $sSection) _ArrayDelete($aArray, 0) ;_ArrayDisplay($aArray) Local $iIndex Local $iTotButtons = UBound($aArray) Local $iNumPerRow = 5 Local $iButWidth = 100 Local $iButDepth = 30 Local $aButiD[$iTotButtons] Local $hGUI = GUICreate('Ingredients Stock "' & $sFilePath & '"', 10 + ($iButWidth + 10) * $iNumPerRow, _ 10 + Ceiling($iTotButtons / $iNumPerRow) * ($iButDepth + 10), -1, $WS_EX_TOPMOST) For $i = 0 To $iTotButtons - 1 ; $x = $iXBorder + (($iRectWidth + $iSpacing) * Mod($i, $iNumCols)) $x = 10 + (($iButWidth + 10) * Mod($i, $iNumPerRow)) ; $y = $iYBorder + (($iRectDepth + $iSpacing) * Int($i / $iNumCols)) $y = 10 + (($iButDepth + 10) * Int($i / $iNumPerRow)) $aButiD[$i] = GUICtrlCreateButton($aArray[$i][0], $x, $y, $iButWidth, $iButDepth) ;, $BS_NOTIFY) Next GUISetState(@SW_SHOW) While 1 $msg = GUIGetMsg() Switch $msg Case $GUI_EVENT_CLOSE GUIDelete($hGUI) ExitLoop Case $aButiD[0] To $aButiD[$iTotButtons - 1] ;clicking on a flavor name $iIndex = ($msg - $aButiD[0]) $RSINGRflavor = $aArray[$iIndex][0] ;flavor name $RSINGRml = $aArray[$iIndex][1] ; ml $RSINGRgal = $aArray[$iIndex][1]*0.000264172 ;converts ml to gal Call('openflavor') EndSwitch WEnd EndFunc Func openflavor() #Region ### START Koda GUI section ### Form=F:\Karl\AutoIt\FJ-Stock JP\GUI Forms\RSINGRSUBFORM.kxf ;opens flavor to view stock and restock submit $RSINGRSUBFORM = GUICreate($sSection & " " & $RSINGRflavor, 242, 213, 530, 269) $RSINGRFlavorTitle = GUICtrlCreateLabel($sSection & " " & $RSINGRflavor, 32, 8, 200, 28) GUICtrlSetFont(-1, 16, 800, 0, "MS Sans Serif") $RSINGRstockcaption = GUICtrlCreateLabel("Current Stock in ml:", 16, 48, 96, 17) $RSINGRstockml = GUICtrlCreateLabel($RSINGRml, 120, 48, 114, 25) GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif") $RSINGRInput = GUICtrlCreateInput("ml", 40, 112, 153, 21) $RSINGRSUBMIT = GUICtrlCreateButton("SUBMIT", 16, 152, 81, 33) $RSINGRCLOSE = GUICtrlCreateButton("CLOSE", 145, 151, 81, 33) $RSINGRgalcaption = GUICtrlCreateLabel("Current Stock in gal:", 16, 80, 97, 17) $RSINGRstockgal = GUICtrlCreateLabel($RSINGRGAL, 120, 80, 114, 25) GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### ; $msg = "" While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE GUIDelete($RSINGRSUBFORM) ExitLoop Case $RSINGRCLOSE GUIDelete($RSINGRSUBFORM) ExitLoop EndSwitch WEnd EndFunc  
      Any help is much appreciated!  Thanks.
      My guess is that $Button isn't an actual string??  Whenever I use msgbox it shows up the string exactly, no numbers attached.  So i'm not sure whats going on here.
×