Sign in to follow this  
Followers 0
rootx

Listview subitem persistent focus? [SOLVED]

8 posts in this topic

#1 ·  Posted (edited)

Holà, I would like to understand why when I select a subitem remains the focus on it. THX

;Rootx
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiStatusBar.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <Array.au3>
#include <File.au3>
#include <GuiImageList.au3>
#include <MsgBoxConstants.au3>
#include <GuiListView.au3>

Global $idListview

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 615, 450, 192, 124)
$Button1 = GUICtrlCreateButton("Button1", 16, 16, 75, 25)
$idListview = GUICtrlCreateListView("", 16, 56, 586, 358, BitOR($GUI_SS_DEFAULT_LISTVIEW,$LVS_SORTASCENDING,$LVS_AUTOARRANGE), BitOR($WS_EX_CLIENTEDGE,$LVS_EX_GRIDLINES))


    _GUICtrlListView_InsertColumn($idListview, 0, "Column 1", 100)
    _GUICtrlListView_InsertColumn($idListview, 1, "Column 2", 100)
    _GUICtrlListView_InsertColumn($idListview, 2, "Column 3", 100)


    _GUICtrlListView_AddItem($idListview, "Row 1: Col 1", 0)
    _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 2", 1, 1)
    _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 3", 2, 1)

    _GUICtrlListView_AddItem($idListview, "Row 2: Col 1", 1)
    _GUICtrlListView_AddSubItem($idListview, 1, "Row 2: Col 2", 1, 1)
    _GUICtrlListView_AddSubItem($idListview, 1, "Row 2: Col 3", 2,1)

    _GUICtrlListView_AddItem($idListview, "Row 3: Col 1", 2)
    _GUICtrlListView_AddSubItem($idListview, 2, "Row 3: Col 2",1, 1)
    _GUICtrlListView_AddSubItem($idListview, 2, "Row 3: Col 3",2, 1)



$StatusBar1 = _GUICtrlStatusBar_Create($Form1)
GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")
GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1

    EndSwitch
WEnd

Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam)
    #forceref $hWnd, $iMsg, $wParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $tInfo, $hWndListView = $idListview
    If Not IsHWnd($idListview) Then $hWndListView = GUICtrlGetHandle($idListview)

    $tNMHDR = DllStructCreate($tagNMHDR, $lParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndListView
            Switch $iCode
                Case $LVN_COLUMNCLICK
                    Local $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam)
                    Local $iCol = DllStructGetData($tInfo, "SubItem")
                    ConsoleWrite("Column clicked: " & $iCol & @CRLF)

                Case $NM_CLICK

                    $aHit = _GUICtrlListView_SubItemHitTest($hWndFrom)
                    $LVEIP_Item = $aHit[0]
                    $LVEIP_SubItem = $aHit[1]

                    Local $tItem
                    $tItem = DllStructCreate($tagLVITEM)
                    DllStructSetData($tItem, "Mask", $LVIF_STATE)
                    DllStructSetData($tItem, "Item", $LVEIP_Item)
                    DllStructSetData($tItem, "SubItem", $LVEIP_SubItem)
                    DllStructSetData($tItem, "State", $LVIS_SELECTED)
                    DllStructSetData($tItem, "StateMask", $LVIS_SELECTED)
                    _GUICtrlListView_SetItemEx($hWndFrom, $tItem)

                    ConsoleWrite("Selected Cell " & _GUICtrlListView_GetItemText($idListview,$LVEIP_Item,$LVEIP_SubItem)&@CRLF)


            EndSwitch
    EndSwitch
EndFunc

 

Edited by rootx

Share this post


Link to post
Share on other sites

Any idea? Thx.

Share this post


Link to post
Share on other sites

Someone has a second x my question please, thx.

Share this post


Link to post
Share on other sites

#4 ·  Posted (edited)

Patience please, someone will eventually respond to your topic.

$LVS_SHOWSELALWAYS
$idListview = GUICtrlCreateListView("", 16, 56, 586, 358, BitOR($GUI_SS_DEFAULT_LISTVIEW,$LVS_SORTASCENDING,$LVS_AUTOARRANGE, $LVS_SHOWSELALWAYS), BitOR($WS_EX_CLIENTEDGE,$LVS_EX_GRIDLINES))

Also, you can use this on your $NM_CLICK to get the row and column of the item clicked (the sub item) without using SubItemhitTest

$tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam)
$iRow = DllStructGetData($tInfo, "Index")
$iCol = DllStructGetData($tInfo, "SubItem")

 

Edited by InunoTaishou

Share this post


Link to post
Share on other sites

#5 ·  Posted (edited)

1 hour ago, InunoTaishou said:

Also, you can use this on your $NM_CLICK to get the row and column of the item clicked (the sub item) without using SubItemhitTest

$tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam)
$iRow = DllStructGetData($tInfo, "Index")
$iCol = DllStructGetData($tInfo, "SubItem")

The index isn't returning in my trials on subitems > 0, which seems to be by design per the structure description.

Quote

; Name...........: $tagNMITEMACTIVATE
; Description ...: Sent by a list-view control when the user activates an item
; Fields ........: $tagNMHDR - Contains information about a notification message
;                  Index      - Index of the list-view item. If the item index is not used for the notification,
;                  +this member will contain -1

;Rootx
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiStatusBar.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <Array.au3>
#include <File.au3>
#include <GuiImageList.au3>
#include <MsgBoxConstants.au3>
#include <GuiListView.au3>

Global $idListview

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 615, 450, 192, 124)
$Button1 = GUICtrlCreateButton("Button1", 16, 16, 75, 25)
;$idListview = GUICtrlCreateListView("", 16, 56, 586, 358, BitOR($GUI_SS_DEFAULT_LISTVIEW,$LVS_SORTASCENDING,$LVS_AUTOARRANGE,$LVS_SINGLESEL), BitOR($WS_EX_CLIENTEDGE,$LVS_EX_GRIDLINES))
$idListview = GUICtrlCreateListView("", 16, 56, 586, 358, BitOR($GUI_SS_DEFAULT_LISTVIEW,$LVS_SORTASCENDING,$LVS_AUTOARRANGE, $LVS_SHOWSELALWAYS), BitOR($WS_EX_CLIENTEDGE,$LVS_EX_GRIDLINES))

    _GUICtrlListView_InsertColumn($idListview, 0, "Column 1", 100)
    _GUICtrlListView_InsertColumn($idListview, 1, "Column 2", 100)
    _GUICtrlListView_InsertColumn($idListview, 2, "Column 3", 100)


    _GUICtrlListView_AddItem($idListview, "Row 1: Col 1", 0)
    _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 2", 1, 1)
    _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 3", 2, 1)

    _GUICtrlListView_AddItem($idListview, "Row 2: Col 1", 1)
    _GUICtrlListView_AddSubItem($idListview, 1, "Row 2: Col 2", 1, 1)
    _GUICtrlListView_AddSubItem($idListview, 1, "Row 2: Col 3", 2,1)

    _GUICtrlListView_AddItem($idListview, "Row 3: Col 1", 2)
    _GUICtrlListView_AddSubItem($idListview, 2, "Row 3: Col 2",1, 1)
    _GUICtrlListView_AddSubItem($idListview, 2, "Row 3: Col 3",2, 1)



$StatusBar1 = _GUICtrlStatusBar_Create($Form1)
GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY")
GUISetState(@SW_SHOW)

#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button1

    EndSwitch
WEnd

Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam)
    #forceref $hWnd, $iMsg, $wParam
    Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $tInfo, $hWndListView = $idListview
    If Not IsHWnd($idListview) Then $hWndListView = GUICtrlGetHandle($idListview)

    $tNMHDR = DllStructCreate($tagNMHDR, $lParam)
    $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom"))
    $iIDFrom = DllStructGetData($tNMHDR, "IDFrom")
    $iCode = DllStructGetData($tNMHDR, "Code")
    Switch $hWndFrom
        Case $hWndListView
            Switch $iCode
                Case $LVN_COLUMNCLICK
                    Local $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam)
                    Local $iCol = DllStructGetData($tInfo, "SubItem")
    ;Debug
    ConsoleWrite("Column clicked: " & $iCol & @CRLF)

                Case $NM_CLICK
                    $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam)
                    $iRow = DllStructGetData($tInfo, "Index")
                    $iCol = DllStructGetData($tInfo, "SubItem")
                    ConsoleWrite($iRow & @TAB & $iCol & @CRLF)
;~                     $aHit = _GUICtrlListView_SubItemHitTest($hWndFrom)
;~                     $LVEIP_Item = $aHit[0]
;~                     $LVEIP_SubItem = $aHit[1]

                    Local $tItem
                    $tItem = DllStructCreate($tagLVITEM)
                    DllStructSetData($tItem, "Mask", $LVIF_STATE)
                    DllStructSetData($tItem, "Item", $iRow)
                    DllStructSetData($tItem, "SubItem", $iCol)
                    DllStructSetData($tItem, "State", $LVIS_SELECTED)
                    DllStructSetData($tItem, "StateMask", $LVIS_SELECTED)
                    _GUICtrlListView_SetItemEx($hWndFrom, $tItem)

                    ;ConsoleWrite("Selected Cell " & _GUICtrlListView_GetItemText($idListview,$iRow,$iCol)&@CRLF)


            EndSwitch
    EndSwitch
EndFunc

 

edit: found this example - be sure to read the next couple posts on that thread for a cosmetic change you may want to incorporate.

 

Edited by spudw2k
1 person likes this

Share this post


Link to post
Share on other sites

#6 ·  Posted (edited)

2 hours ago, InunoTaishou said:

 

Thx, but Doesn't work

Edited by Melba23
Removed quote

Share this post


Link to post
Share on other sites

#7 ·  Posted (edited)

53 minutes ago, spudw2k said:

 

Wow.... I'm blind... THX 4the other just study this example...

#include <WindowsConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiListView.au3>

Opt( "MustDeclareVars", 1 )

Global $hGui, $hLV, $iLVx, $iLVy, $aHit[2] = [ -1, -1 ]  ; $aHit contains row & col of marked cell
Global $aLV = [ [ 0,  25,  45, -1, -1 ], _ ; $hLV, $iLVx, $iLVy, $aHit[0], $aHit[1]
                [ 0, 125, 145, -1, -1 ], _
                [ 0, 225, 245, -1, -1 ] ]

Example()


Func Example()

  $hGui = GUICreate( "Mark Cell in Listview", 500, 520 )

  Local $idTab = GUICtrlCreateTab( 10, 10, 480, 500 )

  GUICtrlCreateTabItem( "Tab 0, LV 0" )
  Local $idLV0 = GUICtrlCreateListView( "Column 0|Column 1|Column 2", 25, 45, 250, 250 )
  For $i = 0 To 99
    GUICtrlCreateListViewItem( "Cell " & $i & ".0" & "|Cell " & $i & ".1" & "|Cell " & $i & ".2", $idLV0 )
  Next
  $hLV = GUICtrlGetHandle( $idLV0 )
  $aLV[0][0] = $hLV
  $iLVx = 25
  $iLVy = 45

  GUICtrlCreateTabItem( "Tab 1, LV 1" )
  Local $idLV1 = GUICtrlCreateListView( "Column 0|Column 1|Column 2", 125, 145, 250, 250 )
  For $i = 0 To 99
    GUICtrlCreateListViewItem( "Cell " & $i & ".0" & "|Cell " & $i & ".1" & "|Cell " & $i & ".2", $idLV1 )
  Next
  $aLV[1][0] = GUICtrlGetHandle( $idLV1 )

  GUICtrlCreateTabItem( "Tab 2, LV 2" )
  Local $idLV2 = GUICtrlCreateListView( "Column 0|Column 1|Column 2", 225, 245, 250, 250 )
  For $i = 0 To 99
    GUICtrlCreateListViewItem( "Cell " & $i & ".0" & "|Cell " & $i & ".1" & "|Cell " & $i & ".2", $idLV2 )
  Next
  $aLV[2][0] = GUICtrlGetHandle( $idLV2 )

  GUICtrlCreateTabItem( "" )

  GUIRegisterMsg( $WM_NOTIFY, "WM_NOTIFY" )

  GUISetState()

  Local $iTab, $iTabPrev = 0
  While 1
    Switch GUIGetMsg()
      Case $idTab
        $iTab = GUICtrlRead( $idTab )
        $aLV[$iTabPrev][3] = $aHit[0]
        $aLV[$iTabPrev][4] = $aHit[1]
        $hLV = $aLV[$iTab][0]
        $iLVx = $aLV[$iTab][1]
        $iLVy = $aLV[$iTab][2]
        $aHit[0] = $aLV[$iTab][3]
        $aHit[1] = $aLV[$iTab][4]
        If $aHit[0] <> -1 Then _
          _GUICtrlListView_RedrawItems( $hLV, $aHit[0], $aHit[0] )
        $iTabPrev = $iTab
      Case $GUI_EVENT_CLOSE
        Exit
    EndSwitch
  WEnd

EndFunc

Func WM_NOTIFY( $hWnd, $iMsg, $wParam, $lParam )
  Local $tNMHDR, $hWndFrom, $iCode
  $tNMHDR = DllStructCreate( $tagNMHDR, $lParam )
  $hWndFrom = HWnd( DllStructGetData( $tNMHDR, "hWndFrom" ) )
  $iCode = DllStructGetData( $tNMHDR, "Code" )

  Switch $hWndFrom

    Case $hLV

      Switch $iCode

        Case $LVN_ITEMCHANGED
          Local $tNMLISTVIEW, $iItem, $aInfo
          $tNMLISTVIEW = DllStructCreate( $tagNMLISTVIEW, $lParam )
          $iItem = DllStructGetData( $tNMLISTVIEW, "Item" )
          _GUICtrlListView_SetItemSelected( $hLV, $iItem, False )
          _GUICtrlListView_SetItemState( $hLV, $iItem, 0, $LVIS_FOCUSED )

          Local $aInfo = GUIGetCursorInfo( $hGui )
          If $aInfo[2] Then
            $aInfo = _GUICtrlListView_SubItemHitTest( $hLV, $aInfo[0]-$iLVx, $aInfo[1]-$iLVy )
            If $aInfo[0] > -1 And $aInfo[1] > -1 And $aInfo[0] = $iItem Then
              If $aHit[0] > -1 Then _
                _GUICtrlListView_RedrawItems( $hLV, $aHit[0], $aHit[0] )
              If $aHit[0] <> $aInfo[0] Or $aHit[1] <> $aInfo[1] Then
                $aHit[0] = $aInfo[0] ; Row
                $aHit[1] = $aInfo[1] ; Col
              Else
                $aHit[0] = -1 ; Row
                $aHit[1] = -1 ; Col
              EndIf
              _GUICtrlListView_RedrawItems( $hLV, $iItem, $iItem )
            EndIf
          EndIf

        Case $NM_CUSTOMDRAW
          Local $tNMLVCUSTOMDRAW = DllStructCreate( $tagNMLVCUSTOMDRAW, $lParam )
          Local $dwDrawStage = DllStructGetData( $tNMLVCUSTOMDRAW, "dwDrawStage" )

          Switch $dwDrawStage                               ; Holds a value that specifies the drawing stage

            Case $CDDS_PREPAINT                             ; Before the paint cycle begins
              Return $CDRF_NOTIFYITEMDRAW                   ; Notify the parent window of any ITEM-related drawing operations

            Case $CDDS_ITEMPREPAINT                         ; Before painting an item
              Return $CDRF_NOTIFYSUBITEMDRAW                ; Notify the parent window of any SUBITEM-related drawing operations

            Case BitOR( $CDDS_ITEMPREPAINT, $CDDS_SUBITEM ) ; Before painting a subitem
              Local $dwItemSpec = DllStructGetData( $tNMLVCUSTOMDRAW, "dwItemSpec" ) ; Item index
              Local $iSubItem   = DllStructGetData( $tNMLVCUSTOMDRAW, "iSubItem"   ) ; Subitem index
              Local $uItemState = DllStructGetData( $tNMLVCUSTOMDRAW, "uItemState" ) ; Item state
              If $dwItemSpec = $aHit[0] Then ; Marked row
                Switch $iSubItem
                  Case $aHit[1] ; Marked column
                    DllStructSetData( $tNMLVCUSTOMDRAW, "ClrText",   0xFFFFFF ) ; Forecolor white
                    DllStructSetData( $tNMLVCUSTOMDRAW, "clrTextBk", 0xCC6600 ) ; Backcolor dark blue, BGR
                  Case Else ; Other columns
                    DllStructSetData( $tNMLVCUSTOMDRAW, "ClrText",   0x000000 ) ; Forecolor black
                    DllStructSetData( $tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF ) ; Backcolor white
                EndSwitch
              Else ; Other rows
                DllStructSetData( $tNMLVCUSTOMDRAW, "ClrText",   0x000000 )
                DllStructSetData( $tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF )
              EndIf
              Return $CDRF_NEWFONT                          ; $CDRF_NEWFONT must be returned after changing font or colors

          EndSwitch

      EndSwitch

  EndSwitch

  Return $GUI_RUNDEFMSG
EndFunc

 

Edited by Melba23
Removed quote

Share this post


Link to post
Share on other sites

rootx,

Delighted you found the solution, but when you reply, please use the "Reply to this topic" button at the top of the thread or the "Reply to this topic" editor at the bottom rather than the "Quote" button - responders know what they wrote and it just pads the thread unnecessarily.

M23

 


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • Anas
      By Anas
      Hi,

      Is it possible to set a different text direction/layout (not alignment) for a Listview column?
       
      Thanks.
    • Jibsbrown
      By Jibsbrown
      So trying to get an INI section in a listView with checkboxes. Was able to get the the section values to show until i add the checkboxes and now only the keys are show up. Between reading the Help file, Forum Topic and trying other code option. I have been unable to answer this problem. I'm assuming its something very basic I'm overlooking since this it's day 21 of learning Autoit.
      If someone could please advise I would appreciate the assistance.
       
      Here's the code: 
      #include <GUIConstantsEx.au3> #include <MsgBoxConstants.au3> #include <GUIListView.au3> #include <Array.au3> #include <File.au3> #include <ListViewConstants.au3> Global $sIniPath = "installLog.ini" ;ConsoleWrite($sIniPath) $iniSctionNames = IniReadSectionNames($sIniPath) ;_ArrayDisplay($iniSctionNames, "$iniSctionNames") $keys2 = IniReadSection($sIniPath, $iniSctionNames[2]) _ArrayDisplay($keys2 , "$keys2") ; Create GUI $hGUI = GUICreate("Test", 300, 250) ; Create ListView $cLV = GUICtrlCreateListView("", 10, 10, 200, 200,$LVS_List,$LVS_EX_CHECKBOXES) _GUICtrlListView_AddColumn($cLV, $keys2, 100) _GUICtrlListView_AddColumn($cLV, $keys2, 100) ;_GUICtrlListView_AddItem($cLV, $keys2, 0) _GUICtrlListView_AddArray($cLV, $keys2) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit EndSwitch WEnd And the INI file I'm using. 
      [OldSysInfo] 4=192.168.0.4|DESKTOP-RDIU2SN|R90M05Q8 5=192.168.0.5|SD0123456789101|R9WGP9P 6=192.168.0.6|SD0123456789102|R9WGP9PT 3=192.168.0.3|DESKTOP-3RS4LKL|R9WGP9P 23=192.168.0.23|SD0123456789102|MXL1234P5I [PrinterIp] 50=192.168.0.50 48=192.168.0.48 47=192.168.0.47 [NewSysInfo] newPC = SD0123456789adfs|192.168.0.185|2UA1234FTR Also if possible could you explain how to hide the Array count row as well.
    • buymeapc
      By buymeapc
      Hi all,
      I'm trying to create a listview with subitem icons and I achieved this by simply rearranging the order of the columns, so that the first column is in the middle, thus appearing as a subitem with an icon - this method prevents the "icon clipping" that happens when using subitem icons in a listview. My issue is that when I select a row that does not have an icon, the space where the icon would be is white. Is there a way to make this transparent, so it looks like the entire row is selected?
      Here's an example - click the second listview item/row to see a blank space where the icon would be.
      #include <GuiConstantsEx.au3> #include <GuiListView.au3> #include <GuiImageList.au3> #include <WindowsConstants.au3> _Main() Func _Main() Local $hGui, $listview, $hImage Local $iLV_EXStyle_NoChecks = BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES, $LVS_EX_DOUBLEBUFFER, $LVS_EX_HEADERDRAGDROP) $hGui = GUICreate("Listview Test With Icons", 400, 300) $listview = GUICtrlCreateListView("Col 1|Col 2|Col 3", 2, 2, 394, 268, BitOR($LVS_REPORT, $LVS_SHAREIMAGELISTS)) _GUICtrlListView_SetExtendedListViewStyle($listview, $iLV_EXStyle_NoChecks) GUISetState() ; Create the image list $hImage = _GUIImageList_Create(16, 16, 5, 3) _GUIImageList_AddIcon($hImage, @SystemDir & "\shell32.dll", 165) _GUICtrlListView_SetImageList($listview, $hImage, 1) ; Set the order so the first column is moved to the middle, ; acting like a subitem with an icon _GUICtrlListView_SetColumnOrder($listview, "1|0|2") ; Add the items GUICtrlCreateListViewItem("Item1|Item2|Item3", $listview) GUICtrlCreateListViewItem("Item4|Item5|Item6", $listview) ; Set an icon for just the first item _GUICtrlListView_SetItemImage($listview, 0, 0) Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() EndFunc ;==>_Main  
    • Luigi
      By Luigi
      Greetings forum,
      Hi develop this script, to use context menu with listview.
      It's work fine, run and click with left or right mouse button, you see on Console the id from item.
      If you click none, the id is -1, like this:
      $NM_RCLICK[-1] $NM_RCLICK[-1] $NM_RCLICK[2] $NM_RCLICK[1] $NM_RCLICK[0] $NM_RCLICK[1] That is correct.
      But if you uncoment the line:
      GUIRegisterMsg($WM_CONTEXTMENU, "WM_CONTEXTMENU")
      You have to click with left button (over item or none) and after click with right button.
      LeftButton is to update $HOSTS_INDEX.
      RightButton is to open ContextMenu.
       
      Exist another way to update $HOSTS_INDEX?
      Example:
      Call WM_NOTIFY every time WM_CONTEXTMENU is called?
      I ask this, becouse i cant understanding why $HOSTS_INDEX is not updated when WM_CONTEXTMENU is uncomented.
      Someone can explain or help me?
       
      Best regards.
      ;~ #AutoIt3Wrapper_AU3Check_Parameters= -q -d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 ;~ #Tidy_Parameters=/sf #include-once #include-once #include <Array.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <GuiMenu.au3> #include <WindowsConstants.au3> #include <WinAPI.au3> #include <SendMessage.au3> #include <Timers.au3> #include <AutoItConstants.au3> #include <EditConstants.au3> #include <File.au3> #include <FontConstants.au3> #include <GuiComboBoxEx.au3> #include <GuiImageList.au3> #include <GuiTreeView.au3> #include <ListViewConstants.au3> #include <StaticConstants.au3> #include <TreeViewConstants.au3> #include <String.au3> OnAutoItExitRegister("OnExit") Opt("GUIOnEventMode", 1) Opt("GUIEventOptions", 1) Opt("MustDeclareVars", 1) Global Enum $eCREATE = 1000, $eUPDATE, $eDELETE, $eICON_TABLE, $eDEFAULT, $eEXPORT_HTML Global Const $EMPTY = -1 Global $HOSTS_INDEX = -1 Global $HOST_Host Global $aGuiSize[2] = [800, 600] Global $sGuiTitle = "GuiTitle" Global $hGui Global $iList, $hList $hGui = GUICreate($sGuiTitle, $aGuiSize[0], $aGuiSize[1]) GUISetOnEvent($GUI_EVENT_CLOSE, "Quit") $iList = GUICtrlCreateListView("nome", 20, 50, 240, 490) $hList = GUICtrlGetHandle($iList) _GUICtrlListView_SetColumnWidth($hList, 0, 236) Populate() GUISetState(@SW_SHOW, $hGui) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") ;~ GUIRegisterMsg($WM_CONTEXTMENU, "WM_CONTEXTMENU") While Sleep(25) WEnd Func OnExit() GUISetState($hGui, @SW_HIDE) GUIDelete($hGui) EndFunc ;==>OnExit Func Quit() Exit EndFunc ;==>Quit Func Populate() Local $arr[4] = [3, "nome 1", "nome 2", "nome 3"] _GUICtrlListView_BeginUpdate($hList) _GUICtrlListView_DeleteAllItems($hList) For $ii = 1 To $arr[0] _GUICtrlListView_AddItem($hList, $arr[$ii]) Next _GUICtrlListView_SetItemSelected($hList, 0, True, True) _GUICtrlListView_EndUpdate($hList) EndFunc ;==>Populate Func WM_CONTEXTMENU($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam, $lParam ConsoleWrite("WM_CONTEXTMENU..( $hWnd=" & $hWnd & ", $iMsg=" & $iMsg & ", $wParam=" & $wParam & ", $lParam=" & $lParam & " )" & @LF) Local $exec = 0 Local $hMenu Switch $wParam Case $hList Local $TRY_ID = _GUICtrlListView_GetHotItem($hList) If Not ($TRY_ID = $HOSTS_INDEX) Then $HOSTS_INDEX = $TRY_ID Local $aOrigin = _GUICtrlListView_GetOrigin($hList) ConsoleWrite("WM_CONTEXTMENU $HOSTS_INDEX[" & $HOSTS_INDEX & "] $aOrigin[" & _GUICtrlListView_GetOriginX($iList) & "]" & @LF) $hMenu = _GUICtrlMenu_CreatePopup() If $HOSTS_INDEX = $EMPTY Then _GUICtrlMenu_InsertMenuItem($hMenu, 0, "Add", $eCREATE) Else _GUICtrlMenu_InsertMenuItem($hMenu, 0, "Rename", $eUPDATE) _GUICtrlMenu_InsertMenuItem($hMenu, 1, "Del", $eDELETE) EndIf _GUICtrlMenu_SetMenu($hGui, $hMenu) $exec = _GUICtrlMenu_TrackPopupMenu($hMenu, $wParam, -1, -1, 1, 1, 2, 1) _GUICtrlMenu_DestroyMenu($hMenu) EndSwitch Return True EndFunc ;==>WM_CONTEXTMENU Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam, $lParam Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $tInfo $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iIDFrom = DllStructGetData($tNMHDR, "IDFrom") $iCode = DllStructGetData($tNMHDR, "Code") Local $TRY_ID Switch $hWndFrom Case $hList $TRY_ID = _GUICtrlListView_GetHotItem($hList) If Not ($TRY_ID = $HOSTS_INDEX) Then $HOSTS_INDEX = $TRY_ID Switch $iCode Case $NM_CLICK ConsoleWrite("$NM_CLICK[" & $TRY_ID & "]" & @LF) If $HOSTS_INDEX = $EMPTY Or $HOST_Host Then ;~ HOSTS_Clear() ;~ HOSTS_ListView_ItemCancel() ;~ GUICtrlSetState($HOSTS_ITEM_DEL, $GUI_DISABLE) ;~ GUICtrlSetState($HOSTS_ITEM_UPD, $GUI_DISABLE) Else Local $name = _GUICtrlListView_GetItemText($hList, $HOSTS_INDEX) ;~ HOSTS_FieldLoad($name) ;~ GUICtrlSetState($HOSTS_ITEM_DEL, $GUI_ENABLE) ;~ GUICtrlSetState($HOSTS_ITEM_UPD, $GUI_ENABLE) EndIf Return 0 ; allow the default processing Case $NM_RCLICK ConsoleWrite("$NM_RCLICK[" & $TRY_ID & "]" & @LF) Return 0 ; allow the default processing EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY  
    • amphoric
      By amphoric
      Hi,
      I am struggling converting my 1D array to a 2D array and then showing that in my List View. Below is my current code, where I would like to take the array from the input box, and have that displayed as a list within the list view this is a list of computer names, and then update the 2nd column of each line once I have ran a ping and a registry change on each computer name, with either 'Completed' and 'Failed'
      I have checked out the AutoIt Arrays page here: https://www.autoitscript.com/wiki/Arrays , but unfortunately I cannot get my head around it. Any help would be greatly appreciated.
      I hope this makes sense.
      Thanks
       
      #include <Date.au3> #include <ButtonConstants.au3> #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <MsgBoxConstants.au3> #include <GUIListBox.au3> #include <GuiListView.au3> #Region ### $Form1 = GUICreate("Title", 515, 533, -1, -1) GUISetBkColor(0xFFFFFF) $Pic2 = GUICtrlCreatePic("Images\pic.jpg", 16, 16, 212, 28) $Label1 = GUICtrlCreateLabel("Label", 240, 16, 271, 33, $SS_CENTER) GUICtrlSetFont(-1, 17, 800, 0, "") $Combo1 = GUICtrlCreateCombo("", 256, 406, 241, 25, BitOR($GUI_SS_DEFAULT_COMBO,$CBS_SIMPLE)) $Label2 = GUICtrlCreateLabel("Please select the location", 45, 401, 210, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $ChangeButton = GUICtrlCreateButton("Change", 286, 487, 75, 25) $RePromptButton = GUICtrlCreateButton("Re-prompt User", 366, 487, 139, 25) $Checkbox1 = GUICtrlCreateCheckbox("I have ensured that my selection is correct.", 10, 487, 273, 25) GUICtrlSetFont(-1, 10, 400, 0, "") $ManLocation = GUICtrlCreateLabel("Please enter the location:", 59, 448, 189, 20, $SS_RIGHT) GUICtrlSetFont(-1, 10, 800, 0, "") GUICtrlSetState(-1, $GUI_HIDE) $ManLocInput = GUICtrlCreateInput("", 256, 445, 241, 24) GUICtrlSetState(-1, $GUI_HIDE) $Label5 = GUICtrlCreateLabel("for this device:", 138, 418, 109, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Label3 = GUICtrlCreateLabel("Asset Number:", 98, 72, 107, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "") $Input1 = GUICtrlCreateInput("", 215, 69, 241, 24) $AddMulti = GUICtrlCreateLabel("Add Multiple Assets", 356, 55, 98, 13, $SS_RIGHT) GUICtrlSetFont(-1, 8, 400, 6, "") GUICtrlSetColor(-1, 0x808080) GUICtrlSetCursor (-1, 0) $List1 = GUICtrlCreateListView("", 16, 104, 481, 278) $Add = GUICtrlCreateButton("Add", 461, 68, 35, 25) GUISetState(@SW_SHOW) #EndRegion ### ;### StartForm ### $FormaMultiple = GUICreate("Title", 277, 418, -1, -1) GUISetBkColor(0xFFFFFF) $Label1 = GUICtrlCreateLabel("Please add 1 asset number per line.", 8, 11, 253, 20, $SS_CENTER) GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif") $OK = GUICtrlCreateButton("OK", 56, 375, 75, 25) $Edit1 = GUICtrlCreateEdit("", 20, 40, 233, 329) $Cancel = GUICtrlCreateButton("Cancel", 136, 375, 75, 25) GUISetState(@SW_HIDE) ;### EndForm ### ;### Add List View Columns START ### ;### Add List View Columns END ### ;### Read Locations START ### ;Read the LOCAL ini file SECTIONS Global $aSections = IniReadSectionNames("Locations.ini") ;If the above succeeded, convert the array to a string with each item separated by a | (pipe) and set the default selected item to $aSections[1] If(Not @Error) Then GUICtrlSetData($Combo1, _ArraytoString($aSections, "|", 1), $aSections[1]) ;### Read Locations END ### ;### Require Admin START ### ;#RequireAdmin ;### Require Admin END ### While 1 $nMsg = GUIGetMsg() ;### Data Validation START ### ;Set Checkbox = ENABLE/DISABLE if not GUICtrlRead($Combo1) = "" AND GUICtrlRead($Combo1) = "Not In List" then if not GUICtrlRead($ManLocInput) = "" Then If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) Else If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) EndIf Else if GUICtrlRead($Combo1) = "" Then If ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_DISABLE) Else If not ControlCommand($Form1, "", $Checkbox1, "IsEnabled") Then GUICtrlSetState($Checkbox1, $GUI_ENABLE) EndIf EndIf ;Set Button = ENABLE/DISABLE If GUICtrlRead($Checkbox1) = 1 Then If Not ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_ENABLE) Else If ControlCommand($Form1, "", $ChangeButton, "IsEnabled") Then GUICtrlSetState($ChangeButton, $GUI_DISABLE) EndIf ;### Data Validation END ### Switch $nMsg Case $GUI_EVENT_CLOSE Exit case $Add Case $AddMulti GUISetState(@SW_SHOW, $FormaMultiple) Case $Cancel GUISetState(@SW_HIDE, $FormaMultiple) Case $OK $sText = GUICtrlRead($Edit1) $aText = StringSplit($sText, @CRLF, 1) $bText = _ArrayToString($aText, ";", 1, -1) $cText = StringStripWS($bText, $STR_STRIPALL ) $dText = StringReplace($cText,";;",";") GUICtrlSetData($Input1, $dText) GUICtrlSetData($Edit1, "") GUISetState(@SW_HIDE, $FormaMultiple) For $i = 1 To $aText[0] Next Case $Combo1 ; If the combo is actioned Switch GUICtrlRead($Combo1) Case "Not In List" ; Show the manual input controls GUICtrlSetState($ManLocation, $GUI_SHOW) GUICtrlSetState($ManLocInput, $GUI_SHOW) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") Case Else ; Hide them GUICtrlSetState($ManLocation, $GUI_HIDE) GUICtrlSetState($ManLocInput, $GUI_HIDE) if ControlCommand($Form1, "", $Checkbox1, "IsChecked") then ControlCommand($Form1, "", $Checkbox1, "Uncheck") GUICtrlSetData($ManLocInput, "") EndSwitch Case $ChangeButton ChangeReg() Case $RePromptButton RemoveReg() EndSwitch WEnd Func ChangeReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "# - " & GUICtrlRead($ManLocInput)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", GUICtrlRead($Combo1)) RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", @MDAY & "/" & @MON & "/" & @YEAR & " " & @HOUR & ":" & @MIN & ":" & @SEC) MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & " Changed to: " & GUICtrlRead($Combo1)) Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg Func RemoveReg() $MultiAssets = StringSplit(GUICtrlRead($Input1), ";", 1) For $i = 1 To $MultiAssets[0] ; Ping with a timeout of 250ms. Local $iPing = Ping($MultiAssets[$i], 250) If $iPing Then ; If a value greater than 0 was returned then do the following: if not GUICtrlRead($ManLocInput) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", "Completed") Else If not GUICtrlRead($Input1) = "" Then RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "Location", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM\SOFTWARE\Location", "LocationLog", "REG_SZ", "") RegWrite("\\" & $MultiAssets[$i] & "\HKLM64\SOFTWARE\Location", "LocationLog", "REG_SZ", "") MsgBox($MB_SYSTEMMODAL, "Completed", $MultiAssets[$i] & @CRLF & "CLEARED") Else MsgBox($MB_SYSTEMMODAL, "Error", "Please ensure all boxes are completed") EndIf EndIf Else MsgBox($MB_SYSTEMMODAL, "Error", "This asset may be OFFLINE, unable to complete") EndIf Next EndFunc ;==>PingReg1