Jump to content

Pasting from clipboard to excel

Recommended Posts




Wondering what I'm doing wrong.

as per my script, I activate an external program, copy data from it and I want to paste it into excel, after I clear the current sheet that is there.

It is some sort of an array as when I manually paste it into excel it expands across rows and down columns (number of which varies).

This repeats for Xno. of program instances, and consequently I would want it to cycle through x sheets.

So far I have the following, noting that I dont have the sheet clearing thing detailed yet, but I get the following error: "Error copying cells. @error = 4, @extended = -2147352567"


func Primary()
    For $i=0 to ubound($term)-1
            until Clipget()
        ;activates sheet no. specified by $i+ 1, removes data from sheet and pastes new data, cycles to the next sheet
        ;function to clear sheet
        _Excel_RangeCopyPaste($oWorkbook1.Worksheets($i+1), Default , "A1")
If @error Then Exit MsgBox($MB_SYSTEMMODAL, "Excel UDF: _Excel_RangeCopy Example 2", "Error copying cells." & @CRLF & "@error = " & @error & ", @extended = " & @extended)
MsgBox($MB_SYSTEMMODAL, "Excel UDF: _Excel_RangeCopy Example 2", "Range 'A1' from workbook _Excel3.xls successfully copied to 'G15'.")


Any help would be great.

Share this post

Link to post
Share on other sites

-2147352567 (dec) translates to 0x80020009 (hex) which means. General Error.
Which version of AutoIt do you run?

My UDFs and Tutorials:


Active Directory (NEW 2017-04-18 - Version - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version - Download - General Help & Support

ADO - Wiki


Share this post

Link to post
Share on other sites

Hi water - version


Share this post

Link to post
Share on other sites

The alternative would be to do things a little more manual:

* activate excel

*active the sheet (how do I do this? either using the excel UDF or manually, avoiding MouseClick)



* send ("^{HOME}")


next ...

Share this post

Link to post
Share on other sites




Edited by Juvigy

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • rudi
      By rudi
      I used the various "_Excel_*()" funktions to open workbooks, read and write cells.
      I was looking through the helpfile for the _EXCEL_* funktions, if there is a direkt way to set background color or text color -- if there is one, then I missed it?
      Searching the forum I found this posting demonstrating how to do this task using ...
      Is there a way to set the background color etc. with the native "_EXCEL_*" as well?
      Regards, Rudi.
    • MrCheese
      By MrCheese
      Hi guys,
      Wondering, is there a better way, likely to use 'for...next' to add a letter to each range, by moving right -> along a range of columns in excel.
      I currently use this, but its clunky.
      If $run = 1 Then $range = "B6:B41" If $run = 2 Then $range = "C6:C41" If $run = 3 Then $range = "D6:D41" If $run = 4 Then $range = "E6:E41" If $run = 5 Then $range = "F6:F41" If $run = 6 Then $range = "G6:G41" If $run = 7 Then $range = "H6:H41" If $run = 8 Then $range = "I6:I41" If $run = 9 Then $range = "J6:J41" If $run = 10 Then $range = "K6:K41" If $run = 11 Then $range = "L6:L41" If $run = 12 Then $range = "M6:M41" If $run = 13 Then $range = "N6:N41" If $run = 14 Then $range = "O6:O41" If $run = 15 Then $range = "P6:P41" If $run = 16 Then $range = "Q6:Q41" If $run = 17 Then $range = "R6:R41" If $run = 18 Then $range = "S6:S41" If $run = 19 Then $range = "T6:T41" If $run = 20 Then $range = "U6:U41" If $run = 21 Then $range = "V6:V41" If $run = 22 Then $range = "W6:W41" If $run = 23 Then $range = "X6:X41" If $run = 24 Then $range = "Y6:Y41" If $run = 25 Then $range = "Z6:Z41" If $run = 26 Then $range = "AA6:AA41" If $run = 27 Then $range = "AB6:AB41" If $run = 28 Then $range = "AC6:AC41" If $run = 29 Then $range = "AD6:AD41" If $run = 30 Then $range = "AE6:AE41" If $run = 31 Then $range = "AF6:AF41" If $run = 32 Then $range = "AG6:AG41" If $run = 33 Then $range = "AH6:AH41" If $run = 34 Then $range = "AI6:AI41" If $run = 35 Then $range = "AJ6:AJ41" If $run = 36 Then $range = "AK6:AK41" If $run = 37 Then $range = "AL6:AL41" If $run = 38 Then $range = "AM6:AM41" If $run = 39 Then $range = "AN6:AN41" If $run = 40 Then $range = "AO6:AO41" If $run = 41 Then $range = "AP6:AP41" If $run = 42 Then $range = "AQ6:AQ41" If $run = 43 Then $range = "AR6:AR41" If $run = 44 Then $range = "AS6:AS41" If $run = 45 Then $range = "AT6:AT41" If $run = 46 Then $range = "AU6:AU41" If $run = 47 Then $range = "AV6:AV41" If $run = 48 Then $range = "AW6:AW41" If $run = 49 Then $range = "AX6:AX41" If $run = 50 Then $range = "AY6:AY41"  
      Normally, if it was going down the rows, i'd use this:
      For $i = 0 To UBound($iRowCount) - 1 $row = $i + 1 $range = "B"&$row&":B"&$row+1 Next  
      so something like this, but i don't know how to code sequential columns:
      For $i = 0 To UBound($iColCount) - 1 $col = $i + 1 $range = $col&"1:"&$col&"40" Next  
      If I don't make sense, let me know.
      Any help would be great. thanks
    • ShawnW
      By ShawnW
      I have a script that takes a large excel file, pulls out and reorganizes certain information I need, and spits out a trimmed down csv file which I uses to upload the information on my website. Some of this information contains characters with accents or em dashes. By default it would create a csv file in ANSI which I then uploaded but had to tell my website import system it was windows-1252 in order for it to look correct.
      This was all working fine except now I need to add in a non-breaking space and non-breaking hyphen into parts of my output. At first I tried using ChrW(0xA0) and ChrW(0x2011) as replacements. A quick test in the console looked correct, however opening the csv output in notepad++ showed the space correctly but a ? for the hyphen and the file was still encoded as ANSI. I tried to view it as UTF-8 instead but this just made the space appear as xAO and also other characters appeared that way like my em dashes appeared as x97 and another symbol as xA7 etc.
      If I instead do a convert to UTF-8 from notepad++ then those problems go away except the hyphen still displays as ?. I then noticed on the page I linked for the non-breaking hyphen it lists the UTF-8 hex as 0xE2 0x80 0x91 (e28091). I was unsure how to enter this in autoit but several things i tried all failed to get the hyphen inserted.
      I need a way to get both the space and hyphen added correctly as either ANSI or UTF-8, but if it is UTF-8 then I need a way to convert all of the other data I extracted from the excel file.
      I've included a test excel file with a single line and test script to create a csv demonstrating the problem.
    • Nareshm
      By Nareshm
      I try to activate my opened excel file using this code :
      #include <Excel.au3> $oExcel = _Excel_Open() $sCaption = $oExcel.Caption WinSetState($sCaption, "", @SW_MAXIMIZE) But when i edit cell in my excel file above code not working because it open new excel sheet.
    • anusha
      By anusha
      Hi I have jus started using auto-it . Please correct me if I'm wrong.
      I need to read data from an input in text box and search in excel file and return value in next column of matched cell on GUI.
      I have written below code but i cannot use variable which has data stored. it works only when search string is hard coded.
      Please help out.
      Func Example()
      Local $GuiMain = GUICreate("EXCEL TEST", 399, 180) ;creates main GUI
      ;~ Local $idOK = GUISetOnEvent($GUI_EVENT_CLOSE, "Close")
      Local $iWidthCell = 70
      Local $idLabel = GUICtrlCreateLabel("PART NUMBER", 10, 30, $iWidthCell,50)
      Local $RUN_1 = GUICtrlCreateButton("OK", 70, 70, 85, 25)
      Local $Input_1 = GUICtrlCreateInput("PART NUMBER", 100, 20, 120, 20)
      Local $sMenutext = GUICtrlRead($Input_1, 1)
      GUISetState(@SW_SHOW, $GuiMain)

          While 1
          $MSG = GUIGetMsg()
              Case $MSG = $GUI_EVENT_CLOSE
              Case $MSG = $RUN_1
                  Local $oAppl = _Excel_Open()

      Local $sFilePath1 = "D:\Anu_WorkFolder\Components.xlsx"
      Local $oWorkbook = _Excel_BookOpen($oAppl, $sFilePath1, Default, Default, True)
      Local $aResult = _Excel_RangeFind($oWorkbook, $sMenutext , Default, Default, $xlWhole)

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.