Timeline


and

12/03/08:

18:58 Ticket #720 (more GUICtrlCreateGraphic()/GUICtrlSetGraphic($GUI_GR_LINE) - ...) closed by Valik
No Bug: This code works for me and basically implements what JP says into a function. There are no weird drawing artifacts with this code: […] JP, I don't see any issues with the code I have posted. I corrected an issue where the vertical lines were not being drawn straight (using an x-coordinate of 1 instead of 0). Other than that, I can't see anything wrong with my corrected example. At any rate, I'm going to close this ticket. There's no bug in what the ticket describes so if you have found something else make a new ticket and/or just fix it.
18:42 Ticket #719 (Problem with GuiCtrlCreateGraph) closed by Valik
Duplicate: Closing at a duplicate of #720 which has more comments.
18:39 Ticket #721 (_Atan2() returns wrong) closed by Valik
No Bug: The code is correct. The angles returned are always going to be positive. If you'll notice, the value you get from _Atan2() - 360 = the value you are after. So, you need to write a thin wrapper that determines the direction and re-calculates the value since _Atan2() will always return the positive angle.
17:44 Ticket #722 (Execute will crash when using a string with spaces.) closed by Valik
Duplicate: Duplicate #402.
17:43 Ticket #723 (Structure problem) closed by Valik
No Bug: The code is correct. The helpfile almost explains why with this line: > DllStructCreate("short;int") ; structure is 8 bytes, the "int" is at offset 4 The key there is, the int (dword in your example) starts at byte 4 (0-index) and not at byte 2 like you are thinking. So, we have the data 0x3378FF453D1133. The 0x3378FF45 portion is mapped to the short but only the first 2 bytes are accessible (0x3378). The 0xFF45 portion is mapped to the 2 bytes of padding that appears between the short and the dword. That means that the dword is 0x3D113300. Visually it looks like: 3378FF453D113300 (Extra 00's added to pad length for clarity). SSSSPPPPDDDDDDDD (Where S = short, P = padding and D = dword). When you start changing the alignment, you remove the padding and the structures align correctly. This is not a bug.
17:18 Ticket #723 (Structure problem) created by trancexx
Unexpected behaviour with function DllStructureCreate()when created …
17:06 Ticket #722 (Execute will crash when using a string with spaces.) created by zechtitus@…
ok bit of background - we had scripts that would read in variables …
16:49 Ticket #721 (_Atan2() returns wrong) created by trancexx
It's function from Math.au3 Returns wrong for points located in third …
13:00 Ticket #720 (more GUICtrlCreateGraphic()/GUICtrlSetGraphic($GUI_GR_LINE) - ...) created by anonymous
According to this post: …

12/02/08:

22:35 Ticket #719 (Problem with GuiCtrlCreateGraph) created by rental7895
I was creating a GUI that would have a border up the left side and …
18:08 Ticket #718 (Call() function claims "function doas not exist" if function was ...) closed by Valik
Rejected: No. I'm not going to add a feature that's not needed so it can be immediately abused to solve a problem in the wrong way. All I'm going to do is document that @error and @extended are set on failure to call the function. I am not going to add in a separate @error/@extended value to check a condition that is largely irrelevant. It is up to the API designer to lay forth the rules about callback functions such as the number of arguments. It is up to the callback designer to ensure their function accepts the correct number of arguments the API will be calling it with. There doesn't need to be functionality in the language to supplant proper communication/documentation.
10:47 Ticket #717 (_EventLog__Report is crashing script) closed by Gary
Works For Me
10:25 Ticket #718 (Call() function claims "function doas not exist" if function was ...) created by Hubertus
In Beta 3.2.13.11 , if a function exists but has wrong number of …

12/01/08:

11:20 Ticket #717 (_EventLog__Report is crashing script) created by anonymous
AutoIT script is crashing when trying to send event to eventlog (UDF). …
07:53 Ticket #716 (decimal subtraction bug) closed by Valik
No Bug: Replying to mmavipc: > MsgBox(0,"",7.04-7 & " " & 8.04-8) > 7.04-7=0.04 > 8.04-8=0.0399999999999991 > hmm I wonder that is wrong with that Nothing is wrong with it. Just like #715, this is not a bug. Floating point numbers are not precise. There is a ton of literature on the internet about it. I've explained it countless times.
04:19 Ticket #716 (decimal subtraction bug) created by mmavipc
MsgBox(0,"",7.04-7 & " " & 8.04-8) 7.04-7=0.04 …
03:11 Ticket #715 (Math error) closed by Valik
No Bug: Replying to V23: > {{{ > ConsoleWrite(0.04 & @CRLF) > ConsoleWrite(8.04-8 & @CRLF) > }}} > > if I run this script, I'll see: > 0.04 > 0.0399999999999991 > Why? Because you touch yourself at night. Particularly when you should be asking things on the forum and NOT the issue tracker. Or better yet, search for things on the forum since I've explained this about seven thousand times. No bug.
02:36 Ticket #715 (Math error) created by V23
[…] if I run this script, I'll see: 0.04 0.0399999999999991 Why?

11/29/08:

06:51 Ticket #714 (Radical(i1,i2,iN)) created by mmavipc
What this would do would be to get the radical of all the numbers …

11/28/08:

23:28 Ticket #712 (enhanced PixelSearch - search direction & logical mask) closed by Valik
Rejected: It's clear you didn't search the issue tracker hard enough or you would have found #351 which covers the first part of your request. As for the rest of the request, write your own. We can't possible provide something that is going to make everybody happy so we provide something basic. If you need something for complicated you can build it yourself.
23:25 Ticket #713 (FileInstall() to accept macros and environment variables.) closed by Valik
Rejected: While it is true those expressions are available at compile-time they are also different than the run-time counter-parts. It's just unnecessary confusion. There are better ways to solve the problem.
22:53 Ticket #713 (FileInstall() to accept macros and environment variables.) created by Hubertus
It would be handy, if FileInstall() would accept macros and …
19:54 Ticket #712 (enhanced PixelSearch - search direction & logical mask) created by haura
A) Search direction: For symmetry, support should be included for: …
12:59 Ticket #710 (UDF for port access) closed by Gary
Rejected
02:35 Ticket #709 (WinGetTitle() returning '[SOH]' character, instead of title of target ...) closed by Valik
Fixed: It will be fixed in 3.2.13.12.
02:16 Ticket #711 (Combobox functions does not work properly or even at all, on Windows ...) closed by Valik
No Bug: For your first issue, it's obvious the ComboBoxEx control is not implemented on the OS you are trying to use. ComboBoxEx is not the same thing as a ComboBox. As for your second issue, read the documentation, I'll be you find your answer. Try looking at the Remarks section of GUICtrlCreateCombo(). No bugs to see here.
00:28 Ticket #711 (Combobox functions does not work properly or even at all, on Windows ...) created by crzmeister@…
Hello, I'll refer to two different combobox functions which …

11/27/08:

16:50 Ticket #710 (UDF for port access) created by Michel
In DOS I use debug to test my port. But in 2000, XP... it dosn't work
13:18 Ticket #709 (WinGetTitle() returning '[SOH]' character, instead of title of target ...) created by anonymous
[…]
03:45 Ticket #708 (ControlGetText() does not work properly.) closed by Valik
Fixed: It will be fixed in the next beta.

11/26/08:

19:40 Ticket #708 (ControlGetText() does not work properly.) created by anonymous
ControlGetText() always returns SOH(Start of heading, Chr(1)). …
11:19 Ticket #707 (_GUICtrlMonthCal_Create) closed by Gary
Fixed: Fixed in version: 3.2.13.12
09:20 Ticket #707 (_GUICtrlMonthCal_Create) created by anonymous
Ex.1 [autoit] #include <GUIConstantsEx.au3> #include <GuiMonthCal.au3> …

11/25/08:

12:04 Ticket #341 (Extend TraySetIcon() undocumented keywords) closed by Jpm
Rejected: I agree that the undocumented behavior should be documented and will be in next beta. But I don't want that the pause icon can be set when the script is running. So I will close this request as rejected.

11/24/08:

18:11 Ticket #706 (Ability to read QWidget Controls would be nice to have) closed by Valik
Rejected: You already knew the answer before you posted.
13:37 Ticket #706 (Ability to read QWidget Controls would be nice to have) created by wooltown
I tink it would be nice if you could have the ability to read the …

11/23/08:

23:55 Ticket #705 (_GUICtrlToolbar_ClickButton() function does not always click on buttons) closed by Gary
Fixed: Fixed in version: 3.2.13.12
23:09 Ticket #703 (_GUICtrlListBox_ClickItem() function does not always click on List Box item) closed by Gary
Fixed: Fixed in version: 3.2.13.12
21:03 Ticket #700 (_GUICtrlTreeView_ClickItem() function does not always click on Tree ...) closed by Gary
Fixed: Fixed in version: 3.2.13.12
20:44 Ticket #701 (_GUICtrlListView_ClickItem() function does not always click on List ...) closed by Gary
Fixed: Fixed in version: 3.2.13.12
20:18 Ticket #702 (_GUICtrlListView_ClickItem() function does not always click on List ...) closed by Gary
Duplicate
20:17 Ticket #704 (_GUICtrlTab_ClickTab() function does not always click on tab button) closed by Gary
No Bug: _WinAPI_ShowCursor works fine on my XP box. _GUICtrlTab_ClickTab was fixed in 3.2.13.11 and does not match your version of it.
20:02 Ticket #705 (_GUICtrlToolbar_ClickButton() function does not always click on buttons) created by Bowmore
Enviroment: WinXP Home SP3 AutoIt 3.2.12.1 AutoIt Beta 3.2.13.11 …
19:56 Ticket #704 (_GUICtrlTab_ClickTab() function does not always click on tab button) created by Bowmore
Enviroment: WinXP Home SP3 AutoIt 3.2.12.1 AutoIt Beta 3.2.13.11 …
19:52 Ticket #703 (_GUICtrlListBox_ClickItem() function does not always click on List Box item) created by Bowmore
Enviroment: WinXP Home SP3 AutoIt 3.2.12.1 AutoIt Beta 3.2.13.11 …
19:45 Ticket #702 (_GUICtrlListView_ClickItem() function does not always click on List ...) created by Bowmore
Enviroment: Win XP Home SP3 AutoIt 3.2.12.1 AutoIt Beta …
19:40 Ticket #701 (_GUICtrlListView_ClickItem() function does not always click on List ...) created by Bowmore
The coords of the centre of the item are calculated in screen coords, …
19:10 Ticket #700 (_GUICtrlTreeView_ClickItem() function does not always click on Tree ...) created by Bowmore
Enviroment: Win XP Home SP3 AutoIt 3.2.12.1 AutoIt Beta …
18:31 Ticket #697 (Process Close Randomly Not Working) closed by Valik
No Bug: That's nice. Now, create a thread in support and talk about the issue with others who can help you. You've given no useful information at all. You've also posted code without any error checking so as far as I can tell you have no proof the code is even flowing how you think it is. At any rate, I find it unlikely this is actually a bug in AutoIt. Even if it is a bug in AutoIt, you haven't provided any information to reproduce it. So I'm closing this.
18:27 Ticket #698 (RunAs/RunAsWait Bug - Blank Passwords) closed by Valik
No Bug
06:26 Ticket #699 (Shutdown(5) Failing) created by kjcdude@…
On about 1/20 of the 600 pcs i run this script on the 2nd lat line of …
06:24 Ticket #698 (RunAs/RunAsWait Bug - Blank Passwords) created by kenny782@…
A user posted a question in support and I confirmed the behavior. It …
02:45 Ticket #697 (Process Close Randomly Not Working) created by kjcdude@…
I run my scripts on over 600 PCs and have been running this portion of …

11/22/08:

14:51 Ticket #692 (Tidy crashes on long lines) closed by Jos
Fixed: Fixed in v 2.0.24.1 available now in the Beta directory. Jos

11/21/08:

20:04 Ticket #696 (Autoit Vista 64bit) closed by Valik
No Bug: This isn't related to AutoIt. This should have been asked on the forum.
19:37 Ticket #696 (Autoit Vista 64bit) created by anonymous
Running Vista Ent 64bit. Newest autoit and SciTE. Also tryed older …

11/20/08:

21:58 Ticket #695 (FileMove returns an error code of 0 for failure AND for success) closed by Valik
No Bug: Yeah, just found your thread on the forum. Learn to read.
21:41 Ticket #695 (FileMove returns an error code of 0 for failure AND for success) created by anonymous
A successful FileMove returns an error code of 0 (failure)
00:11 Ticket #680 (Listview and image background problem) closed by Valik
No Bug

11/19/08:

23:55 Ticket #694 (_SQLite_FetchNames) closed by Valik
No Bug
23:55 Ticket #690 (Problems with Run and chkdsk) closed by Valik
No Bug: There's no bug here. You're running the code from SciTE or another editor. Editors change the behavior of using STDIO redirection. Run the script compiled and it will work correctly, aside from some obvious issues in the code itself (Hint: Just because the process ends doesn't mean there's not data to read). Anyway, no bug.
10:56 Ticket #693 (Error in _DateTimeFormat() function) closed by Gary
Fixed: Fixed in version: 3.2.13.12
10:00 Ticket #694 (_SQLite_FetchNames) created by psandu.ro@…
this file don't run with 3.2.13.11: …
02:55 Ticket #596 (String<From/To>ASCIIArray() functions) closed by Valik
Completed: Changed in version: 3.2.13.12

11/18/08:

19:48 Ticket #693 (Error in _DateTimeFormat() function) created by Heinz Stege <public.215.967@…>
There seems to be a typo in the source code of the _DateTimeFormat() …
15:32 Ticket #692 (Tidy crashes on long lines) created by monoceres
Tidy crashes when one line is very long ( I think ~2000 chars) …
09:37 Ticket #50 (Handle COM Byte-Array) closed by Jon
Completed: Added in version: 3.2.13.12
01:37 Ticket #691 (Not equal <> condition with OR gives wrong result) closed by Valik
No Bug: I suggest you look again. If $temp is equal to 7 then $temp is not equal to 1 thus the first condition in your first example is true therefore the entire statement is true. You need to be using the AND operator in the first example, not OR. No bug.
00:36 Ticket #691 (Not equal <> condition with OR gives wrong result) created by anonymous
Not equal <> condition with OR gives wrong result. Example 1 give …

11/17/08:

23:59 Ticket #690 (Problems with Run and chkdsk) created by anonymous
I updated to the latest Public (3.2.12.1). I've got problems with …
21:19 Milestone 3.2.13.11 completed
19:38 Ticket #689 (@DesktopDir macro introduces unwanted characters at times.) closed by Valik
No Bug: You do realize this has nothing to do with @DesktopDir, right? That all that macro does is return a string? I don't think you do know that since you don't bother to actually state what the contents of @DesktopDir are. Chances are, something is messing with the keyboard state. Barring that, send the characters in raw mode. This is almost certainly not a bug and even if there is a bug I can pretty much guarantee it's not with @DesktopDir. If either of the two comments I made are not helping then post on the forum. You need support, not a fix in AutoIt.
19:19 Ticket #689 (@DesktopDir macro introduces unwanted characters at times.) created by sanchezconsulting@…
Under Windows Vista, the @DesktopDir macro sometimes "shifts" certain …
18:44 Ticket #663 (AU3_PixelChecksum returns 0x80000000 if more than that) closed by Jon
Fixed
18:34 Ticket #688 (Built-in function to compare colors) closed by Valik
Rejected: There's nothing built-in about it. It extracts the red, green and blue components and then it creates a high and low value for each color by adding/subtracting the shade variation. Then the test color is compared to see if it's in the calculated range. It's nothing fancy and hardly worth porting out to a function. Also, there are many other ways to compare pixels so I don't think we should provide a method. You need to write a method that works for you.
18:11 Ticket #687 (@Unicode) closed by Valik
No Bug: Reading the 3.2.13.10 changelog or searching the issue tracker would have yielded your answer. The macro has been removed because AutoIt is always Unicode now, we do not provide an ANSI version.
18:08 Ticket #688 (Built-in function to compare colors) created by Manadar
PixelSearch probably already uses a built-in function in AutoIt to …
17:59 Ticket #686 (Make Application's librairy) closed by Valik
Rejected: The AutoItX DLL already exists for this purpose. You can not compile a script to DLL if that is what you are asking.
17:59 Ticket #685 (Add fonctionnality to Autoit) closed by Valik
Rejected: This request makes no sense. Closing.
17:11 Ticket #687 (@Unicode) created by exodius
Per the Changelog dated 16th May, 2008 - v3.2.12.0: Changed: @Unicode …
15:49 Ticket #686 (Make Application's librairy) created by Tayou Fabrice
Many functions exist in Autoit or are simple but not in other language …
15:39 Ticket #685 (Add fonctionnality to Autoit) created by tayoufabrice
I need to build dll library with Autoit to use it after in DllCall, …
11:21 Ticket #442 (Proposed changes to _StringAddThousandsSep()) closed by Gary
Completed: Changed in version: 3.2.13.11
10:38 Ticket #674 (_GUICtrlTab_ClickTab() Clicks in the wrong place when $fMove = True) closed by Gary
Fixed: Fixed in version: 3.2.13.11

11/16/08:

20:29 Ticket #684 (ShellExecute() should return ProcessId instead of 1 if all is OK.) closed by Valik
Rejected: The PID is not available to be returned.
18:52 Ticket #684 (ShellExecute() should return ProcessId instead of 1 if all is OK.) created by Hubertus
It would be easier to control the spawned process if the Pid is …
07:26 Ticket #679 (FileReadLine function only read 65534 characters at a time.) closed by Jpm
Fixed: Fixed in version: 3.2.13.11
05:42 Ticket #683 (Setting new text with _GUICtrlTab_SetItemText) closed by Gary
No Bug: Already fixed in beta
05:26 Ticket #683 (Setting new text with _GUICtrlTab_SetItemText) created by Josbe
Setting text with _GUICtrlTab_SetItemText() doesn't update the …

11/15/08:

18:13 Ticket #681 (Document 64KB line limit for FileReadLine()) closed by Valik
Duplicate: Duplicate of #679.
18:09 Ticket #679 (FileReadLine function only read 65534 characters at a time.) reopened by Valik
JP, you documented the wrong value.
17:51 Ticket #682 (Remove 64K line limit for FileReadLine()) created by PsaltyDS
Ref documentation change in BugTrac #681. FileReadLine() uses a 64K …
17:40 Ticket #681 (Document 64KB line limit for FileReadLine()) created by PsaltyDS
Based on this support topic: FileReadLine problem read a very big …
13:16 Ticket #679 (FileReadLine function only read 65534 characters at a time.) closed by Jpm
Fixed: Fixed in version: 3.2.13.11
03:08 Ticket #680 (Listview and image background problem) created by anonymous
When there is an image set as the background of a GUI and a listview …

11/14/08:

22:50 Ticket #678 (MAX_LINESIZE confine arrays) closed by Valik
No Bug: AutoIt is line based. The line limit is 4096 characters per line. There is no plan to change this.
22:16 Ticket #679 (FileReadLine function only read 65534 characters at a time.) created by joon
[…]
21:16 Ticket #678 (MAX_LINESIZE confine arrays) created by dutCh
Please remove this unneeded restriction. I want dim arrays with size …
11:16 Ticket #675 (Bug in _Date_Time_CompareFileTime) closed by Gary
No Bug: The params for this function take structures to the file time, not strings to the file.

11/13/08:

22:45 Ticket #677 (ControlGetHandle/ControlListView on .Net Listview crashes/not working ...) created by freakazoid
Sample Application: …

11/12/08:

17:39 Ticket #668 (_FileGetCommonPath & _FileArrayGetCommonPath) closed by Valik
Rejected: Been a few days with no follow-up and I can't really see this being used for much so closing.
17:18 Ticket #676 (autoit(exe) exiting when reciving audio from www with bass.dll) closed by Valik
No Bug: Seriously? Whatever. Closing. See the forum thread for the explanation.
16:52 Ticket #676 (autoit(exe) exiting when reciving audio from www with bass.dll) created by hofi02
This is my testcode: […] after some time the script is exiting …
15:08 Ticket #675 (Bug in _Date_Time_CompareFileTime) created by 2olg@…
Have a russian message, but try translate: AutoIt v3: autoit3.exe …

11/11/08:

11:46 Ticket #674 (_GUICtrlTab_ClickTab() Clicks in the wrong place when $fMove = True) created by Bowmore
Enviroment: Win XP Pro SP2 Autoit 3.2.12.1 Autoit 3.2.13.10 Beta …
10:47 Ticket #672 (_StringAddThousandsSep) closed by Gary
Duplicate: see #621
05:54 Ticket #673 (Wrong priority of logic operators) closed by Jpm
No Bug: your expressions are not equivalent as they are executed left to right the first is (True or True) and False No BUG
04:32 Ticket #673 (Wrong priority of logic operators) created by amel27
[…] return False, but equivalent expression […] return True
04:01 Ticket #672 (_StringAddThousandsSep) created by koiron
_StringAddThousandsSep(-10) returns 10, should be prefixed with …

11/10/08:

03:39 Ticket #671 (Hard crash when using $WS_EX_MDICHILD) closed by Valik
Fixed: Fixed in version: 3.2.13.11

11/09/08:

23:58 Ticket #671 (Hard crash when using $WS_EX_MDICHILD) created by anonymous
This simple example bellow should reproduce a hard crash of the …

11/08/08:

19:21 Ticket #662 (ListView setting $LVS_EX_FLATSB flattens header only instead of scrollbars) closed by Valik
No Bug: This is not a bug. Flat scrollbars are not supported when using comctl32.dll 6.00 which is what AutoIt uses on Windows XP.
19:00 Ticket #659 (FileSelectFolder does not return full path is selecting a network ...) closed by Valik
Fixed: Fixed in version: 3.2.13.11
18:56 Ticket #669 (Bad description) closed by Valik
Fixed: Fixed in version: 3.2.13.11
17:48 Ticket #670 (Listviews with checkboxes doesn't work "properly"....in my opinion) closed by Valik
No Bug: Replying to anonymous: > I'm too lazy right now to take apart my code to show an example, so hopefully what I say is understandable. For me personally, this was automatic ticket closing. If you are too lazy to provide all the information necessary then don't bother posting. > I set up a listview in conjunction with a WM_Notify function. When the CELL of the checkbox is clicked, it registers but the box isn't checked, which throws off my function. I believe that if the surrounding cell is clicked the checkbox should be checked as well. If this is not a "bug" I think this should be how it functions...unless there is a specific reason why it isn't like that. It's not designed like that, obviously. At any rate, you already wrote a WM_NOTIFY handler, so what exactly is stopping you from implementing the behavior you want? No bug here and there's nothing for us to add.
13:23 Ticket #670 (Listviews with checkboxes doesn't work "properly"....in my opinion) created by anonymous
I'm too lazy right now to take apart my code to show an example, so …
13:10 Ticket #669 (Bad description) created by Andreik
Description from help file of function Dec()example is wrong. […] …
10:51 Milestone 3.2.13.10 completed

11/07/08:

18:13 Ticket #668 (_FileGetCommonPath & _FileArrayGetCommonPath) created by TheSaint
_FileGetCommonPath & _FileArrayGetCommonPath ProgAndy has created …
00:47 Ticket #667 (Forum, opening (preview-linked) Image window to small.) closed by Valik
Wont Fix: We did not write the forum software. If you have issues with it, report them to IPB, not us.
00:32 Ticket #667 (Forum, opening (preview-linked) Image window to small.) created by MvGulik
There is no real report section for Website/Forum issues. So dropping …

11/06/08:

23:19 Ticket #651 (FileFindFirstFile FileFindNextFile _FileListToArray not support ...) closed by Valik
No Bug: Closing due to lack of information.
23:18 Ticket #657 (_IECreate brings up Outlook Express instead of Internet Explorer) closed by Valik
No Bug: Closing due to lack of information.
23:17 Ticket #350 (FileInstall fails when user login name is non-English chars) closed by Valik
Rejected: We can't find anything wrong in our code and we can't reproduce it. We apparently already changed the code Jon had in mind so closing.
23:15 Ticket #615 (License needs fixed) closed by Valik
Fixed: Jon has fixed this and it will appear in the next beta version.
21:25 Ticket #665 (_GUICtrlListView_SetColumnWidth et al. lack proper typecasting in ...) closed by Gary
No Bug: if you are passing a string you need cast the type.
19:19 Ticket #664 (SciTE Magnifying (Zooming) doesn't properly update horizontal scrollbar) closed by Jos
No Bug
18:17 Ticket #666 (Ability to wait on a Mutex) closed by Valik
Rejected: DllCall() and the Windows API mutex/object related functions can do it.
17:54 Ticket #666 (Ability to wait on a Mutex) created by anonymous
When performing uninstalls, the recommended way to wait for the …
15:18 Ticket #665 (_GUICtrlListView_SetColumnWidth et al. lack proper typecasting in ...) created by sys55@…
Bug: _GUICtrlListView_SetColumnWidth et al. lack proper typecasting in …
13:34 Ticket #664 (SciTE Magnifying (Zooming) doesn't properly update horizontal scrollbar) created by sys55@…
Using SciTE 1.77 full package from 2-11-2008 SciTE4AutoIt3.exe …
04:34 Ticket #663 (AU3_PixelChecksum returns 0x80000000 if more than that) created by Hollinar
While making a c++ program to automate something, I ran into this …

11/05/08:

20:43 Ticket #662 (ListView setting $LVS_EX_FLATSB flattens header only instead of scrollbars) created by sys55@…
Bug in AutoIt Version: 3.2.12.1 ListView setting $LVS_EX_FLATSB …
15:15 Ticket #660 (Unicode version for Au3Check) closed by Valik
Rejected: Replying to Manadar: > Unless it is too much of a hassle, can we get a version of Au3Check that is updated for the new millenium? Any time you try to port a non-UNICODE program to UNICODE it's a hassle. Au3Check would need to be re-written. If it's ever re-written then UNICODE support is likely going to come for free since chances are it would be written in a more traditional manner.
15:13 Ticket #661 (Disable "Beep" using MsgBox) closed by Valik
Rejected: Changed to a feature request and rejected. The point of a message box is to get the user's attention. If you are finding it annoying then you're probably using it wrong. Otherwise, all I can say is turn down your volume. we certainly aren't going to attempt to circumvent the features of a standard API call in Windows.
11:47 Ticket #661 (Disable "Beep" using MsgBox) created by ED14
Is there a possibility to disable the nerving BEEP when …

11/04/08:

22:05 Ticket #660 (Unicode version for Au3Check) created by Manadar
This may be a bit useless to most people, but I often find that I run …
12:46 Ticket #659 (FileSelectFolder does not return full path is selecting a network ...) created by marraw
When using FileSelectFolder to select a folder from a sharepoint site …

11/03/08:

17:16 Ticket #658 (Multiple desktops support) closed by Valik
Rejected: I have no clue what you are asking for here. I understand the concept of multiple desktops but I don't see how any of that relates to AutoIt or what you want AutoIt to do to accomplish whatever it is you think you need AutoIt changed to accomplish. At any rate, I don't really see us doing anything in this area. I know that it's already possible to create multiple desktops via AutoIt so if that is possible then I imagine whatever interactivity you are looking for is possible as well.
15:34 Ticket #658 (Multiple desktops support) created by anonymous
Hello! While writing a script for an online game I started playing …
Note: See TracTimeline for information about the timeline view.