Jump to content
Sign in to follow this  
mitchito

Select another item in my own Combobox

Recommended Posts

mitchito

Good morning,

I've been checking the help file and many forums but I haven't found the command to do what I need.

I have a Combobox in my own GUI and once a function begins I need it select another option in my own Combobox. All options are already set in the Combobox.

Thank you very much for helping me

Share this post


Link to post
Share on other sites
slbmeh

I found this looking for the answer myself. I've found this under GUICtrlSetData()

For Combo or List control :

If the "data" corresponds to an already existing entry it is set as the default.

If the "data" starts with GUIDataSeparatorChar or is an empty string "" the previous list is destroyed.

  • Like 1

Share this post


Link to post
Share on other sites
mitchito

Ok, I solved my problem but thank you anyway.

I am writing you here the solution I used:

Global $items, $msg, $comb, $bot1, $bot2

GUICreate("GUI combo", 180, 110)

$items = "|item1|item2|item3"

$comb = GUICtrlCreateCombo("", 10, 10, 160)

GUICtrlSetData(-1, $items, "item3")

$bot1 = GuiCtrlCreateButton('Selecciona "item1"', 10, 40)

$bot2 = GuiCtrlCreateButton("Selecciona segundo elemento", 10, 70)

GUISetState()

While 1

$msg = GUIGetMsg()

Switch $msg

case $GUI_EVENT_CLOSE

ExitLoop

case $bot1

;GUICtrlSetData($comb, $items, "item1")

GUICtrlSendMsg($comb, $CB_SELECTSTRING, -1, "item1") ; Selecciona por texto

case $bot2

GUICtrlSendMsg($comb, $CB_SETCURSEL, 1, 0) ; Selecciona por posición (0 = primer elemento)

EndSwitch

WEnd

Edited by mitchito

Share this post


Link to post
Share on other sites
guinness

Help file >> _GUICtrlComboBox_SetCurSel.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites
slbmeh

I'm not sure you got the GUICtrlSetData function to work properly, I assumed not based on the line you had previously commented out. Here is an example of how it should work to select.

Global $items, $msg, $comb, $bot1, $bot2
GUICreate("GUI combo", 180, 110)
$items = "|item1|item2|item3"
$comb = GUICtrlCreateCombo("", 10, 10, 160)
GUICtrlSetData(-1, $items, "item3")
$bot1 = GuiCtrlCreateButton('Selecciona "item1"', 10, 40)
$bot2 = GuiCtrlCreateButton("Selecciona segundo elemento", 10, 70)
GUISetState()

While 1
    $msg = GUIGetMsg()
    Switch $msg
        case $GUI_EVENT_CLOSE
            ExitLoop
        case $bot1
            GUICtrlSetData($comb, "item1")
        case $bot2
            GUICtrlSendMsg($comb, $CB_SETCURSEL, 1, 0) ; Selecciona por posición (0 = primer elemento)
    EndSwitch
WEnd

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • FrancescoDiMuro
      By FrancescoDiMuro
      Good evening everyone
      First, I want to apologize with you for the title not very clear, but I thought a little bit on which title to set at the thread, and this is the one that came in mind.
      Now, let me explain what I'm trying to understand.

      I am making an application ( with n clients ), with an SQLite Database, which has a Main form, and n sub-forms... 
      Since these sub-forms are called several times, because they are used to add or update records to the Database, I put the code that generates the GUI of these sub-forms in Functions.
      There are two sub-forms which are "treated" as two main forms, since even them have n sub-forms, which perform various tasks.
      Where am I stucked?

      For the Main form I created a Status Bar, in order to display messages ( add/delete/update/search results ), and it works perfectly with all the forms which don't have other sub-forms.
      For the two forms, which indeed have n sub-forms, I created two separated Status Bars, which are (re)created everytime I call the function that then displays the form.
      Practically, I can't set icons to these two Status Bars, and I don't know why.
      I'm really sorry that I don't feel clear enough, so, here you are an example of what I am saying.
      I recreated exactly what my script does:
      #include <GuiButton.au3> #include <GUIConstantsEx.au3> #include <GuiStatusBar.au3> #include <WindowsConstants.au3> Opt("GUIOnEventMode", 1) Global $frmSubForm, _ $txtSubFormField, _ $sbSubFormStatusBar, _ $objSB_IconError = _WinAPI_LoadShell32Icon(109), _ $objSB_IconInformation = _WinAPI_LoadShell32Icon(277) #Region ### START Koda GUI section ### Form= $frmMainForm = GUICreate("Main Form", 300, 300, -1, -1) GUISetOnEvent($GUI_EVENT_CLOSE, "ExitApplication") $sbMainStatusBar = _GUICtrlStatusBar_Create($frmMainForm) $btnCreateSubForm = GUICtrlCreateButton("Create Sub Form", 105, 110, 75, 41, BitOR($BS_CENTER,$BS_VCENTER,$BS_MULTILINE)) GUICtrlSetOnEvent(-1, "GenerateSubForm") GUICtrlSetFont(-1, 10, 400, 0, "Arial") _GUICtrlStatusBar_SetSimple($sbMainStatusBar) _GUICtrlStatusBar_SetText($sbMainStatusBar, "") GUISetState(@SW_SHOW, $frmMainForm) #EndRegion ### END Koda GUI section ### While 1 Sleep(100) WEnd Func ExitApplication() Exit EndFunc Func GenerateSubForm() #Region ### START Koda GUI section ### Form= $frmSubForm = GUICreate("Sub-Form", 300, 300, -1, -1, -1, -1, $frmMainForm) GUISetOnEvent($GUI_EVENT_CLOSE, "DeleteSubForm") $txtSubFormField = GUICtrlCreateInput("", 0, 0, 100, 20) $btnCheckSubFormField = GUICtrlCreateButton("Check Field", 105, 110, 75, 41, BitOR($BS_CENTER,$BS_VCENTER,$BS_MULTILINE)) GUICtrlSetOnEvent(-1, "CheckSubFormField") GUICtrlSetFont(-1, 10, 400, 0, "Arial") $sbSubFormStatusBar = _GUICtrlStatusBar_Create($frmSubForm) _GUICtrlStatusBar_SetSimple($sbSubFormStatusBar) _GUICtrlStatusBar_SetText($sbSubFormStatusBar, "") GUISetState(@SW_SHOW, $frmSubForm) GUISetState(@SW_DISABLE, $frmMainForm) #EndRegion ### END Koda GUI section ### EndFunc Func DeleteSubForm() ; Declared Globally => $frmSubForm GUIDelete($frmSubForm) GUISetState(@SW_ENABLE, $frmMainForm) EndFunc Func WriteToStatusBar($sbStatusBar, $objSB_Icon, $strText) _GUICtrlStatusBar_SetIcon($sbStatusBar, 0, $objSB_Icon) _GUICtrlStatusBar_SetText($sbStatusBar, $strText) ConsoleWrite("Icon Handle: " & $objSB_Icon & @CRLF) EndFunc Func CheckSubFormField() ; Declared Globally => $txtSubFormField If GUICtrlRead($txtSubFormField) = "" Then ; Declared Globally => $sbStatusBar WriteToStatusBar($sbSubFormStatusBar, $objSB_IconError, "Field NOK.") Else WriteToStatusBar($sbSubFormStatusBar, $objSB_IconInformation, "Field OK.") EndIf EndFunc The text is set, but icon is not.
      Could someone please tell me why?
      Thanks everyone in advance  

      Best Regards.
    • odaylton
      By odaylton
      Hello everyone ,
      Text translated from Portuguese by google - please apologize for any errors

      Once again I need a light from the gurus of this wonderful website
      I am fanatic by combobox for its usability but I am not able to uncertain images within lists ...
      I know uncertain icons, and cursors but I am not able to insert gif or jpg images.
      1) How to solve this ...
      2) will the path is to convert gif into bmp and then uncertain ... how to do that?
      #include <GUIConstantsEx.au3> #include <GuiImageList.au3> #include <GuiListView.au3> #include <WinAPI.au3> #include <WindowsConstants.au3> ;dados de mouse #include <WinAPIRes.au3> ;COMBO #include <GuiComboBoxEx.au3> ;Fonts #include <FontConstants.au3> ;obter imagem de arquivo #include <GDIPlus.au3> #include <WinAPIGdi.au3> Example() Func Example() Local $hGUI, $hImage, $hCombo, $hFont Local $idListview, $hImage Local $sWow64 = "" Local $Pasta = "C:\WINDOWS\Cursors\3dgarro.cur" Local $PastaROMs = @MyDocumentsDir & "\Stella\ROMs\" ;com barra no final $hGUI = GUICreate("ImageList", 500, 310) GUISetFont(14, 400, 0, "Arial") ;<<<<<<<<<<this does not work for _GUICtrlComboBoxEx_Create $hCombo = _GUICtrlComboBoxEx_Create($hGUI, "", 2, 2, 494, 200) ;GUICtrlSetFont($hCombo, 14, 400, 0, "Arial");<<<<<<<<<<It does not work ; ;Create a handle to a font object $hFont = _WinAPI_CreateFont(30, 0, 0, 0, 400, False, False, False, $DEFAULT_CHARSET, $OUT_DEFAULT_PRECIS, $CLIP_DEFAULT_PRECIS, $DEFAULT_QUALITY, 0, 'Arial') ;Pass the handle to _WinAPI_SetFont _WinAPI_SetFont($hCombo, $hFont) $idListview = GUICtrlCreateListView("", 2, 50, 494, 250, BitOR($LVS_SHOWSELALWAYS, $LVS_NOSORTHEADER, $LVS_REPORT)) _GUICtrlListView_SetExtendedListViewStyle($idListview, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_GRIDLINES, $LVS_EX_DOUBLEBUFFER)) GUISetState(@SW_SHOW) ; Initialize GDI+ library _GDIPlus_Startup() ; Load images $hImage = _GUIImageList_Create(120, 70, 6, 2) ;32,32,5,5) ; $DadosCombo = "Escolha|" & _GUIImageList_Add($hImage, _GUICtrlComboBoxEx_CreateSolidBitMap($hCombo, 0x0000FF, 120, 70)) ;Local $aCursors[] = [32650, 32512, 32515, 32649, 32651, 32513, 32648, 32646, 32643, 32645, 32642, 32644, 32516, 32514] For $i = 1 To 10 $sFile = FileOpenDialog("Please select an image", $PastaROMs, "Image (*.jpg;*.png;*.bmp;*.gif;*.tif)", BitOR($FD_PATHMUSTEXIST, $FD_FILEMUSTEXIST)) If @error Then Exit MsgBox(BitOR($MB_TOPMOST, $MB_ICONERROR), "Error", "No image file has been selected", 30) $a = _GDIPlus_BitmapCreateFromFile ($sFile);<<<<< ok If @error Or Not $hImage Then MsgBox(BitOR($MB_TOPMOST, $MB_ICONERROR), "Error", "This file isn't supported by GDIPlus!") Else $b=_GUIImageList_Add($hImage, $a);<<<<<< Return -1 $DadosCombo &= "|" & $i & "_img_princ.gif""|" & $b EndIf Next _GUICtrlListView_SetImageList($idListview, $hImage, 1) _GUICtrlComboBoxEx_SetImageList($hCombo, $hImage) ; Add columns _GUICtrlListView_AddColumn($idListview, "Icons - Mouses", 350) ; Add items $a = StringSplit($DadosCombo, "|") For $i = 1 To $a[0] Step 2 _GUICtrlListView_AddItem($idListview, $a[$i], $a[$i + 1]) _GUICtrlComboBoxEx_AddString($hCombo, $a[$i], $a[$i + 1], $a[$i + 1]) Next ;AutoIt_Debugger_Command:Disable_Debug ; Loop until the user exits. Do Until GUIGetMsg() = $GUI_EVENT_CLOSE GUIDelete() ;AutoIt_Debugger_Command:Enable_Debug EndFunc ;==>Example tks
    • Reziskonh
      By Reziskonh
      Hi, everybody
      I look for GUI whose behavior similar to the message of an email client or antivirus
      In other words:
          Any PC screen able to calculate the size
          To consider the Task bar size
          To find the lower corner on the right/below and to nestle on it

      Notes:
      In GUI the GUICtrlCreateEdit field (as option) - that can be received and displayed through variable information
      Thanks a lot
      PS
      I use the translator, excuse if something is not clear
       

    • VollachR
      By VollachR
      Hi,
      I'd like to show a progress bar for an operation performed by an external program my script is running silently, I want to show it in a GUI I created using the GUICtrlCreateProgress but I have no idea how to do it.
      The important thing to point out is that there's no way of knowing how long the external program will run, as it is a file splitter and it depends on the size of file it splits and the split parts size.
      Can someone point me in the right direction or give me an example how to do so?
      This is my RunWait command:
      RunWait($MYFILES1 & '\fsplit.exe -split ' & $Size & ' mb ' & $File & " -f " & $File & "." & $extension) It uses multiple variables declared and set earlier in the script, how will I got about having the progress of that command shown using GUICtrlCreateProgress ? Is it possible?
      Thank you.
    • aiter
      By aiter
      I  possibly misunderstood the value of combo boxes, but I thought you could type a value, press enter and the combo box would store that value.
      The reason for wanting this is to store a history of typed commands into the combo box (accepted by pressing enter).
       
      After hours of trying to trap enter on a combobox I realized that the enter event was not registering.
      I had code like this (which used to work on a input box), but it does not for a combobox (because it does not accept enter)
      unc WM_COMMAND($hWnd, $Msg, $wParam, $lParam) Local $nNotifyCode = BitShift($wParam, 16) Local $nID = BitAND($wParam, 0x0000FFFF) If $hWnd = $CmdForm Then If $nID = $ComboInput Then ; useed to work on a normal input box If _IsPressed('0D') Then ; enter was pressed, respond DoCmd() Anyone able to help?
×