Jump to content
Sign in to follow this  
Yashied

SciTE 3.5.5.101 for AutoIt

Recommended Posts

I like idea of the right panel (sidebar)!

But the tabs are not saved when restarting SciTE.

Edited by UEZ

Please don't send me any personal message and ask for support! I will not reply!

Selection of finest graphical examples at Codepen.io

The own fart smells best!
Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!
¯\_(ツ)_/¯  ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ

Share this post


Link to post
Share on other sites

Hi 

Yashied, It says that a virus in the compressed file. 

EID_autoit_heur Edited by kcvinu

My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

Hi 

Yashied, Thanks for your hardwork. This is a good AutoIt code editor. Kindly add these features to this Editor.

1. When we press "Enter" after typing an "If" statement, then add "End IF" automatically. Not only for "IF", but also for "Func", "while", "Switch" too. Just like what visual studio does. And i can't find any intelliscense on this editor.


My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

Hi 

Yashied, great. Thatnks. And what about the auto complete of "EndIf, EndFunc, Next, WEnd" ?

My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

I like idea of the right panel!

But the tabs are not saved when restarting SciTE.

Turn on the Option:  Tools > Advanced > Save Session 

Share this post


Link to post
Share on other sites

I have downloaded SciTE 3.2.5.99 for AutoIt 3.3.12.0 (including Compiler Wrapper) and i ran the program. All is well. But i can't run any code. It is not responding while i clicking run button. And if i click on Compile button, it will sow this message ==> "Compiler not found". I thought my downloaded file is coming with a compiler. But how to fix this. the program is not residing in AutoIt directory. 


My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

I have downloaded SciTE 3.2.5.99 for AutoIt 3.3.12.0 (including Compiler Wrapper) and i ran the program. All is well. But i can't run any code. It is not responding while i clicking run button. And if i click on Compile button, it will sow this message ==> "Compiler not found". I thought my downloaded file is coming with a compiler. But how to fix this. the program is not residing in AutoIt directory. 

Open SciTEpropertiesau3.properties and specify the full path to AutoIt directory, e.g.

 

[Global]
#~AutoIt root directory
AutoIt3Dir=C:\Program Files (x86)\AutoIt3

Also check the following registry key (required for Au3Stripper).

 

HKEY_CURRENT_USER\Software\AutoIt v3\AutoIt
Include=C:\Program Files (x86)\AutoIt3\Include

Share this post


Link to post
Share on other sites

Hi 

Yashied, It worked. Thanks. But i didn't touch any registry key. Because i don't know what Au3Stripper is.  

My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

@Yashied How can i make every new file as *.au3 ?. Now each new file is coming with a *.properties extension.


My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

@Yashied OK. Is there any option to change so that i can add "End If, End Func, Next, Wend" automatically. 


My Contributions

UDF Link Viewer   --- A tool to visit the links of some most important UDFs 

 Includer_2  ----- A tool to type the #include statement automatically 

 Digits To Date  ----- date from 3 integer values

PrintList ----- prints arrays into console for testing.

 Alert  ------ An alternative for MsgBox 

 MousePosition ------- A simple tooltip display of mouse position

GRM Helper -------- A littile tool to help writing code with GUIRegisterMsg function

Access_UDF  -------- An UDF for working with access database files. (.*accdb only)

 

Share this post


Link to post
Share on other sites

love what you've done with this.

issue: when one wants to fill

#pragma compile(FileVersion, 1.5.0.10)
#pragma compile(ProductVersion, 1.5.0.10)
from the interface it removes the zero at the end.
 
 
I hope this gets to be the default distribution, very well thought out, thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By BugFix
      The block comment (internal: box comment) in SciTE cannot be toggled.
      I have now created a script that helps. It works with any file type for which the corresponding entries in the properties are created.For toggeling its required to detect, what the user want to do.
      Rules for detection:     - selection starts in an empty line (line break only)         following line begins with comment.box.start ==> action: uncomment         otherwise                                    ==> action: comment     - selection starts in line with text         line begins with comment.box.start           ==> action: uncomment         otherwise                                    ==> action: comment     - selection ends in an empty line AND       the line before begins with comment.box.end    ==> action: both lines are part of comment block, will deleted     - selection ends in line with comment.box.end    ==> action: line will deleted     - At least two lines must be selected, otherwise an error message is output to the console. This means that in nested block comments there is at least one more line between two comment.box.start markers.
      It is recommended to write all block comment settings into "SciTEUser.properties". The setting "comment.box.end.au3" from "SciTEGlobal.properties" is incorrect and must be corrected.
      comment.box.start.au3=#cs #~ If TAB should used as box.middle, define an alternation (e.g. "@Tab"),  #~ "\t" will not recognised as tab if passed as propertie. comment.box.tab.alternation= #~ If you want characters or tab in each line of comment block, define it here. #~ To use TAB, set the alternation variable here: $(comment.box.tab.alternation) comment.box.middle.au3= comment.box.end.au3=#ce Connection to SciTE
      Search a free command number. Use a Hotkey of your choice.
      If you have declared an option for user lua scripts (e.g.: "Lua.User.Scripts.Path=C:\code\lua"), copy the script to this folder.
      Otherwise copy it to a folder of your choice and change the path in the command: "dofile". But backslashes in the path must be masked. ("\\").
      If your path has spaces don't forgot to encapsulate in string delimiters.
      # 24 Toggle Block Comment command.name.24.*=Toggle Block Comment command.24.*=dofile $(Lua.User.Scripts.Path)/BlockComment.lua command.mode.24.*=subsystem:lua,savebefore:no command.shortcut.24.*=Ctrl+Alt+F10  
      Here the lua script:
      -- TIME_STAMP 2020-10-04 18:56:11 v 0.5 --[[ Toggle Block Comments ©BugFix ( autoit[at]bug-fix.info ) For toggeling its required to detect, what the user want to do. Rules for detection: - selection starts in an empty line (line break only) following line begins with comment.box.start ==> action: uncomment otherwise ==> action: comment - selection starts in line with text line begins with comment.box.start ==> action: uncomment otherwise ==> action: comment - selection ends in an empty line AND the line before begins with comment.box.end ==> action: both lines are part of comment block, will deleted - selection ends in line with comment.box.end ==> action: line will deleted - At least two lines must be selected, otherwise an error message is output to the console. Properties: It is recommended to write all block comment settings into SciTEUser.properties. The setting "comment.box.end.au3" from "SciTEGlobal.properties" is incorrect and must be corrected. comment.box.start.au3=#cs #~ If TAB should used as box.middle, define an alternation (e.g. "@Tab"), #~ "\t" will not recognised as tab if passed as propertie. comment.box.tab.alternation= #~ If you want characters or tab in each line of comment block, define it here. #~ To use TAB, set the alternation variable here: $(comment.box.tab.alternation) comment.box.middle.au3= comment.box.end.au3=#ce ]] local BlockComment = { -- variables ext, -- file extension boxStart, -- property: comment.box.start boxMiddle, -- property: comment.box.middle boxEnd, -- property: comment.box.end bMiddle, -- bool: boxMiddle is defined selStart, -- selection start position selEnd, -- selection end position lineStart, -- selection start line number lineEnd, -- selection end line number newText, -- the text that replaces the selection Init = function(self) self.ext = props["FileExt"] self.boxStart = props["comment.box.start."..self.ext] self.boxMiddle = props["comment.box.middle."..self.ext] local tabAlternation = props["comment.box.tab.alternation"] if tabAlternation ~= "" and self.boxMiddle == tabAlternation then self.boxMiddle = "\t" end self.boxEnd = props["comment.box.end."..self.ext] self.bMiddle = not (self.boxMiddle == "") self.selStart = editor.SelectionStart self.selEnd = editor.SelectionEnd self.lineStart = editor:LineFromPosition(self.selStart) self.lineEnd = editor:LineFromPosition(self.selEnd) self.newText = "" end, -- create the line w/wo middle markers NewLine = function(self, _num, _uncmt) local line = editor:GetLine(_num) if _uncmt then -- if second last line has box.end AND last line is empty OR if (_num == self.lineEnd -1 and self:LineIsEnd(_num) and self:LineIsEmpty(_num +1)) or -- if is the last line AND its empty --> stop proceeding (_num == self.lineEnd and self:LineIsEmpty(_num)) then return "" else -- if box.middle exists --> remove it if self.bMiddle then line = line:sub(self.boxMiddle:len()+1) end end else -- add box.middle if exists line = self.boxMiddle..line end return line end, -- checks if line is empty (has only a line break) LineIsEmpty = function(self, _lineNum) return (editor:GetLine(_lineNum) == "\r\n") end, -- checks if line has box.start LineIsStart = function(self, _lineNum) local line = editor:GetLine(_lineNum) return ( line:sub(1, self.boxStart:len()):lower() == self.boxStart:lower() ) end, -- checks if line has box.end LineIsEnd = function(self, _lineNum) local line = editor:GetLine(_lineNum) return ( line:sub(1, self.boxEnd:len()):lower() == self.boxEnd:lower() ) end, -- returns "false" if none error ErrorCheck = function(self) if self.selStart == self.selEnd then print("! NONE SELECTION.") return true elseif self.boxStart == "" or self.boxEnd == "" then print("! ERROR - The comment.box properties for *."..self.ext.." files are missing or incomplete.") return true elseif self.lineStart == self.lineEnd then print("! SINGLE LINE SELECTION. USE LINE COMMENT INSTEAD.") return true else return false end end, -- creates the text to toggle and replace the selection with it Toggle = function(self) self:Init() if self:ErrorCheck() then return end local uncomment = false local skip = 0 -- proceed with first line -- if start position is in empty line AND next line has box.start --> uncomment the block if self:LineIsEmpty(self.lineStart) and self:LineIsStart(self.lineStart +1) then uncomment = true skip = 1 -- the following line will ignored now -- if line from start position has box.start --> uncomment the block elseif self:LineIsStart(self.lineStart) then uncomment = true -- in other cases comment the block else -- insert box.start before the first line; if box.middle exists --> insert it too self.newText = self.boxStart.."\n"..self.boxMiddle..editor:GetLine(self.lineStart) end -- proceed with middle lines -- if box.middle is defined set/replace it in line local n = self.lineStart + 1 + skip local line while n < self.lineEnd do self.newText = self.newText..self:NewLine(n, uncomment) n = n + 1 end -- proceed with last line line = editor:GetLine(self.lineEnd) if not uncomment then self.newText = self.newText..self.boxMiddle..line..self.boxEnd else -- if uncomment the last line will ignored, but the trailing "\r\n" must deleted self.newText = self.newText:sub(1, -3) end -- replace the selection with the new toggled text editor:ReplaceSel(self.newText) end } BlockComment:Toggle() As far as I know, it is not possible to overwrite SciTE internal hotkeys. In this case "Ctrl+Shift+B" for IDM_BLOCK_COMMENT. Therefore I used the connection shown here.
      But if overwriting is possible, I would be interested in this solution.
      BlockComment.lua
    • By Bhooshan
      I need to mute an ongoing call on Microsoft teams without activating the window. Teams allows us to mute using shortcut key Ctrl+Shift+m but only when the window is active.
      # Used set option as ongoing call can be with any person which leads to change in Title Name.
      AutoItSetOption ( "WinTitleMatchMode", 2 ) 
      # I am not clear with the control ID which will be good to use here and also the key combination of ^M       
      ControlSend ( "Microsoft Teams", "", "[CLASS:Intermediate D3D Window; INSTANCE:1]", "{ctrl down}")
       
      Can anyone help...!!! 
       

    • By Sayed
      Hi there, 
      I'm new in AutoIt forms and using AutoIt to automate desktop application (able to automate the application normally but facing issue when I've to re-run the application twice within the same script...so need help in this please)
      here is the steps then followed by the issue in a brief : 
      1- run application . 
      2- do some actions (click menus,activate windows,set texts..)
      3- close the application. 
      4- run the application again & access the same controls.
      5- open the same windows again (like step 2)
      6- perform some validations (by getting texts from some text boxes)
      7- close the application again (and repeat 1-7 for 15 times in average )
      The issue 
      * all controls are accessible in the first run and actions done successfully on controls (for steps 1-3) BUT from the second run of the application from step-4 it's able to set focus only the main application window.
      Note: only unique properties used to while mapping the controls. 
      Error that appear in the console :
      UIAWrappers.au3" (1673) : ==> Array variable has incorrect number of subscripts or subscript dimension range exceeded.: $x = Int($t[1] + ($t[3] / 2)) $x = Int($t[1] + (^ ERROR  
      Simple spy code  of one of the controls that has this strange issue(menubar&view menu Item): 
      ;~ *** Standard code maintainable *** #include "UIAWrappers.au3" AutoItSetOption("MustDeclareVars", 1) _UIA_setVar("oP1","Title:=XXX;controltype:=UIA_WindowControlTypeId;class:=WindowsForms10.Window.8.app") ;main app form xxx _UIA_setVar("oP2","Title:=menuStrip1;controltype:=UIA_MenuBarControlTypeId;class:=WindowsForms10.Window.8.app") ;menuStrip1 ;~ $oUIElement=_UIA_getObjectByFindAll("View.mainwindow", "title:=View;ControlType:=UIA_MenuItemControlTypeId", $treescope_subtree) _UIA_setVar("oUIElement","Title:=View;controltype:=UIA_MenuItemControlTypeId;class:=") ;ControlType:=UIA_MenuItemControlTypeId;classname:=") ;~ Actions split away from logical/technical definition above can come from configfiles ;~_UIA_Action("oP1","highlight") _UIA_Action("oP1","setfocus") ;~_UIA_Action("oP2","highlight") _UIA_Action("oP2","setfocus") _UIA_action("oUIElement","highlight") ;~_UIA_action("oUIElement","click")  
       
    • By Fenzik
      Hello All!
      i suggest to set default encoding in Scite4 for Autoit 3 to UTF 8 with Bom encoding, format recommended also in Autoit Help.
      In last editor version, when i open new script, for example Czech characters (č, ř, ž) aren't correct.
      So when i change Encoding to UTF 8 with Bom from Default Code page property state, everithing seems to be OK.
      Thank you and sorry for potentialy duplicated content.
      Fenzik
    • By matwachich
      AutoIt3 Lua Wrapper
      This is an AutoIt3 wrapper for the Lua scripting language. Consider it beta software, but since I will be using it in commercial product, expect it to evolve.
      It has been developped with Lua 5.3.5. Updates will come for new Lua version.
      Everything works just fine, except one (big) limitation: Anything that throws a Lua error (using C setjmp/longjmp functionality) will crash your AutoIt program. That means that it is impossible to use throw errors from an AutoIt function called by Lua (luaL_check*, lua_error...).
      It is hosted in Github: https://github.com/matwachich/au3lua
      Simple example
      #include <lua.au3> #include <lua_dlls.au3> ; Initialize library _lua_Startup(_lua_ExtractDll()) OnAutoItExitRegister(_lua_Shutdown) ; create new execution state $pState = _luaL_newState() _luaopen_base($pState) ; needed for the lua's print function $iRet = _luaL_doString($pState, 'print("Hello, world!")') If $iRet <> $LUA_OK Then ; read the error description on top of the stack ConsoleWrite("!> Error: " & _lua_toString($pState, -1) & @CRLF) Exit EndIf ; close the state to free memory (you MUST call this function, this is not AutoIt's automatic memory management, it's a C library) _lua_close($pState)
×
×
  • Create New...