Jump to content

Recommended Posts

hi I have a problem with the IP address field I want to enter the indicated page on the Internet after entering the IP address, but it does not work pops up all the time, "
Make sure that the web address http://0.0.0.0 is correct. "From the input field everything works, but I want to write in this field only the IP address, I used to enter the ES_Numbers style it works, but I can only write the number, dots do not work.I have read the help file about  _GUICtrlIpAddress_Create but it did not help me,anyone can help?

here is code

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiIPAddress.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <IE.au3>
#include <GuiIPAddress.au3>
#Region ### START Koda GUI section ### Form=C:\Users\Marcin\Desktop\Projekty Oficjalne\AutoLogin\AutoLog.kxf
$Form1 = GUICreate("Internet Login", 542, 181, 339, 261)
$Group3 = GUICtrlCreateGroup("IP ADDRESS E.G..192.168.0.1", 16, 40, 161, 49)
$IpAddress =  _GUICtrlIpAddress_Create($Form1, 24, 56, 145, 21)

$gPin = GUICtrlCreateInput("", 216, 56, 105, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD))
$gHaslo = GUICtrlCreateInput("", 216, 112, 105, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD))
$Btn_Zaloguj = GUICtrlCreateButton("Log In", 216, 152, 97, 25)
$Group1 = GUICtrlCreateGroup("Your Pin", 208, 40, 121, 49)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$Group2 = GUICtrlCreateGroup("Your Password", 208, 96, 121, 49)
GUICtrlCreateGroup("", -99, -99, 1, 1)
GUICtrlCreateGroup("", -99, -99, 1, 1)
 $oIE = _IECreateEmbedded()
 $object=GUICtrlCreateObj($oIE,336, 8, 201, 169)
GUISetState(@SW_SHOW)



While 1
    $msg = GUIGetMsg()
    if $msg=-3 Then Exit
    If $msg=$Btn_Zaloguj Then Btn_Zaloguj()
WEnd

Func Btn_Zaloguj()
    $read1=GuiCtrlread($IpAddress)
    _IENavigate($oIE,$read1)
    EndFunc
Link to post
Share on other sites
44 minutes ago, FrancescoDiMuro said:

Good morning @mar3011:)
I tried your script, and the IP Address field seems to work correctly.
What is the issue? 

I am popping up: "I can not display the page" and this is the ip address to my login router,

 

 

ssss.PNG

Edited by mar3011
Link to post
Share on other sites

Fails because _GUICtrlIpAddress_Create retrieves a handle.

 

Func Btn_Zaloguj()
    $read1=GuiCtrlread($IpAddress)
    _IENavigate($oIE,_GUICtrlIpAddress_Get ( $IpAddress ))
EndFunc

 

Spoiler

Renamer - Rename files and folders, remove portions of text from the filename etc.

GPO Tool - Export/Import Group policy settings.

MirrorDir - Synchronize/Backup/Mirror Folders

BeatsPlayer - Music player.

Params Tool - Right click an exe to see it's parameters or execute them.

String Trigger - Triggers pasting text or applications or internet links on specific strings.

Inconspicuous - Hide files in plain sight, not fully encrypted.

Regedit Control - Registry browsing history, quickly jump into any saved key.

Time4Shutdown - Write the time for shutdown in minutes.

Power Profiles Tool - Set a profile as active, delete, duplicate, export and import.

Finished Task Shutdown - Shuts down pc when specified window/Wndl/process closes.

NetworkSpeedShutdown - Shuts down pc if download speed goes under "X" Kb/s.

IUIAutomation - Topic with framework and examples

Au3Record.exe

Link to post
Share on other sites

I liked this and saved it for myself, just did a couple of changes:

#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiIPAddress.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <IE.au3>
#include <WinAPI.au3>
#include <GuiIPAddress.au3>
#Region ### START Koda GUI section ### Form=C:\Users\Marcin\Desktop\Projekty Oficjalne\AutoLogin\AutoLog.kxf
$Gui = GUICreate("Internet Login", 1, 1)
WinMove($Gui, '', 0,0,@DesktopWidth/1.7, @DesktopHeight/1.75)
;=============================================================================
$Group3 = GUICtrlCreateGroup("IP ADDRESS E.G..192.168.0.1", 16, 40, 161, 49)
$IpAddress =  _GUICtrlIpAddress_Create($Gui, 24, 56, 145, 21)
_GUICtrlIpAddress_Set($IpAddress, '192.168.1.1')
;=============================================================================
$Group1 = GUICtrlCreateGroup("Your Pin", 40, 100, 121, 49)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$gPin = GUICtrlCreateInput("", 50, 120, 105, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD))
;=============================================================================
$Group2 = GUICtrlCreateGroup("Your Password", 40, 160, 121, 49)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$gHaslo = GUICtrlCreateInput("", 50, 180, 105, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_PASSWORD))
;=============================================================================
$Btn_Zaloguj = GUICtrlCreateButton("Log In", 50, 220, 97, 25, $BS_DEFPUSHBUTTON)
;=============================================================================
 $oIE = _IECreateEmbedded()
 $object=GUICtrlCreateObj($oIE,190, 8, @DesktopWidth/2, @DesktopHeight/2)
GUISetState(@SW_SHOW)
;=============================================================================
While 1
    $msg = GUIGetMsg()
    if $msg=-3 Then Exit
    If $msg=$Btn_Zaloguj Then Btn_Zaloguj()
WEnd
;=============================================================================
Func Btn_Zaloguj()
    _IENavigate($oIE,_GUICtrlIpAddress_Get ( $IpAddress ))
EndFunc
;=============================================================================

 

Edited by careca
Spoiler

Renamer - Rename files and folders, remove portions of text from the filename etc.

GPO Tool - Export/Import Group policy settings.

MirrorDir - Synchronize/Backup/Mirror Folders

BeatsPlayer - Music player.

Params Tool - Right click an exe to see it's parameters or execute them.

String Trigger - Triggers pasting text or applications or internet links on specific strings.

Inconspicuous - Hide files in plain sight, not fully encrypted.

Regedit Control - Registry browsing history, quickly jump into any saved key.

Time4Shutdown - Write the time for shutdown in minutes.

Power Profiles Tool - Set a profile as active, delete, duplicate, export and import.

Finished Task Shutdown - Shuts down pc when specified window/Wndl/process closes.

NetworkSpeedShutdown - Shuts down pc if download speed goes under "X" Kb/s.

IUIAutomation - Topic with framework and examples

Au3Record.exe

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DJ143
      I have a autoit exe file which is used in upload/browse file functionality.  This has been integrated with selenium framework and I am invoking the autoit exe using Java process and runtime. 
      Now the issue is when I run the scripts and invoke the autoit exe in local it works perfectly.  But when I use selenium grid or jenkins to run the scripts in another windows server it is not working.
      Can anyone please suggest any solution for this?
    • By Hermes
      Hello, the script below will read column A from an excel file - and if a value matches in the browser, it will click the corresponding link and click on a specific button to paste the data, then writes "Completed" in Column B. It will continue to read from the excel file and do the same thing for all the remaining rows.
      #Include "Chrome.au3" #Include "wd_core.au3" #Include "wd_helper.au3" #Include "WinHttp.au3" #include <MsgBoxConstants.au3> #include <File.au3> #include <IE.au3> #include <Array.au3> #include <INet.au3> #include <AutoItConstants.au3> #include <WinAPIFiles.au3> #include <GDIPlus.au3> #include <Excel.au3> #Include "WinHttp.au3" #Include "_HtmlTable2Array.au3" Local $sDesiredCapabilities, $sSession SetupChrome() _WD_Startup() $sSession = _WD_CreateSession($sDesiredCapabilities) _WD_LoadWait($sSession) _WD_Navigate($sSession, "table1.html") _WD_LoadWait($sSession) _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") Local $sElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, "//table[@class='main']") ;ConsoleWrite ("mat-table " & $sElement & @CRLF) Local $aArray1 = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//td[contains(@class,'data')]", $sElement, True) sleep(1000) For $i = 0 to UBound($aArray1) - 1 $aArray1[$i] = _WD_ElementAction($sSession, $aArray1[$i], 'text') Next ;_ArrayDisplay($aArray1) ;Email variables $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "Hermes" ; name from who the email was sent $FromAddress = "sender@gmail.com" ; address from where the mail should come $ToAddress = "recipient@gmail.com" ; destination address of the email - REQUIRED, use commas (,) to add more email addresses $Subject = "File not found" ; subject from the email - can be anything you want it to be $Body = "File not found!" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "High" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS $tls = 0 ; enables/disables TLS when required Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters If FileExists($sWorkbook) Then ;Check if the file exist. Local $oAppl = _Excel_Open() Local $sWorkbook = "c:\test.xlsx" Local $oWorkbook = _Excel_BookOpen($oAppl, $sWorkbook) ;open excel and pass both parameters Local $aArray2 = _Excel_RangeRead($oWorkbook,Default,$oWorkbook.ActiveSheet.Usedrange.Columns("A:A")) Local $iIdx Local $Skipline = 0 ;0==> first line Do Local $temprf For $i = 0 To UBound($aArray2) - 1 $temprf &= $aArray2[$i] _WD_WaitElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]") Local $aElement = _WD_FindElement($sSession, $_WD_LOCATOR_ByXPath, ".//a[contains(@class,'edit') and contains(text(),'Edit')]", $sElement, True) $iIdx = _ArraySearch($aArray1, $aArray2[$i]) If @error Then ContinueLoop _WD_ElementAction($sSession, $aElement[$iIdx], 'click') If $i < $Skipline Then ContinueLoop $oRange = $oWorkbook.ActiveSheet.Range("B" & $i + 1 & ":XFD" & $i + 1) _Excel_RangeCopyPaste($oWorkbook.Activesheet, $oRange) ;Paste Local $oTest4 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "pastebutton") _WD_ElementAction($sSession, $oTest4, 'click') Sleep(1000) ;Save Button Local $save3 = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "button.button") _WD_ElementAction($sSession, $save3, 'click') _Excel_RangeWrite($oWorkbook, $oWorkbook.Activesheet, "Completed", "B" & $i+1) sleep(1000) Next Until (Not @error) _Excel_Close($oWorkbook) Else _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls) Exit EndIf _WD_LoadWait($sSession) ;Attaching files to emails Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf ; Set security params If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send $objEmail="" EndFunc ;==>_INetSmtpMailCom Local $aDir = _FileListToArrayRec(@TempDir, "scoped_dir*;chrome_*", $FLTAR_FOLDERS, $FLTAR_NORECUR, $FLTAR_NOSORT, $FLTAR_FULLPATH) Sleep(2000) For $i = 1 To $aDir[0] DirRemove($aDir[$i], $DIR_REMOVE) Next _WD_LoadWait($sSession) _WD_Shutdown() Func SetupChrome() _WD_Option('Driver', 'chromedriver.exe') _WD_Option('Port', 9515) _WD_Option('DriverParams', '--log-path="' & @ScriptDir & '\chrome.log"') $sDesiredCapabilities = '{"capabilities": {"alwaysMatch": {"goog:chromeOptions": {"w3c": true, "args":["start-maximized","disable-infobars"]}}}}' EndFunc ;==>SetupChrome If the excel file doesn't exists in the folder, it will send an email to a specific recipient.
      What i am trying figure out now is if the excel crashes while the script/loop is running, I want to relaunch the excel file continue to the last row before the excel crashed. So if the value of column B is not marked as "completed", it should continue from that row
      Appreciate any help that I can get to achieve this.
      table1.html test.xlsx
    • By adityaparakh
      Hello ,
      I am trying to use Websockets in AutoIt.
      It is to fetch live stock market prices , API is provided and documentation available for python language.
      The link for the code snippet is :
      https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Introduction
      https://symphonyfintech.com/xts-market-data-front-end-api-v2/#tag/Instruments/paths/~1instruments~1subscription/post
       
      https://github.com/symphonyfintech/xts-pythonclient-api-sdk
       
      Second Link is to subscribe to a list of ExchangeInstruments.
      Now I would like to get live stock ltp (LastTradedPrice) for a few stocks whose "ExchangeInstrumentID" I know.
      I am able to use the WinHttp object to perform actions using simple codes like below :
      I have the secretKey and appkey and can generate the needed token. And get the unique ExchangeInstrumentID.

      Below code is just for example of how I am using WinHttp. Unrelated to socket part.
      Global $InteractiveAPItoken = IniRead(@ScriptDir & "\Config.ini", "token", "InteractiveAPItoken", "NA") $baseurl = "https://brokerlink.com/interactive/" $functionurl = "orders" $oHTTP = ObjCreate("winhttp.winhttprequest.5.1") $oHTTP.Open("POST", $baseurl & $functionurl, False) $oHTTP.SetRequestHeader("Content-Type", "application/json;charset=UTF-8") $oHTTP.SetRequestHeader("authorization", $InteractiveAPItoken) $pD = '{ "exchangeSegment": "NSEFO", "exchangeInstrumentID": ' & $exchangeInstrumentID & ', "productType": "' & $producttype & '", "orderType": "MARKET", "orderSide": "' & $orderside & '", "timeInForce": "DAY", "disclosedQuantity": 0, "orderQuantity": ' & $qty & ', "limitPrice": 0, "stopPrice": 0, "orderUniqueIdentifier": "' & $orderidentifier & '"}' $oHTTP.Send($pD) $oReceived = $oHTTP.ResponseText $oStatusCode = $oHTTP.Status
          
          
      But am struggling to understand and use socket.
      Would be of great help if you can have a look at the link mentioned above and help with the code sample for AutoIt.
      To connect and listen to a socket.
      Thanks a lot
       
    • By Hermes
      Hi, I have a site that has the following elements below: 
      <div>More element here</div> <div>More element here</div> <div>More element here</div> When I do this in Auto It:
      Local $oSelectDiv = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "div") _WD_HighlightElement($sSession, $oSelectDiv, 1) I also tried to add [3], but it doesnt seems to work:
      Local $oSelectDiv = _WD_FindElement($sSession, $_WD_LOCATOR_ByCSSSelector, "div[3]") _WD_HighlightElement($sSession, $oSelectDiv, 1) It always highlight the first one, but I am trying to highlight the 3rd in the list. Is there anyway to select the 3rd div without having to add any class/id in the divs, and without using XPATH? The structure of the elements in that site were built that way.
    • By meety
      My au3 script program needs administrator privileges on win10 to be executed correctly, because it needs to be added to the boot---Script code:RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", @ScriptName, "REG_SZ", @ScriptFullPath)
      I need to let the program automatically get administrator privileges, so I use a function of #RequireAdmin. Although the program can be added to the boot, but does not execute after system boot up? why is that?
      What should I do?
      --------------------------------------------------------------------
      Update:
      I found that after using the #RequireAdmin function, the program cannot be executed after system boot up.
      An example is given below. after it is compiled, it will not be executed after system boot up in the following two ways.
      1. C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp\
      2. RegWrite("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run", @ScriptName, "REG_SZ", @ScriptFullPath)
      why is that?
      example
      #include <MsgBoxConstants.au3>
      #RequireAdmin
      Func test()
          MsgBox(0, "", "this is test message")
      EndFunc   ;==>test
      test()
       
       
×
×
  • Create New...