TheDcoder

Alternative to AutoIt?

19 posts in this topic

Hi, I am looking for a new programming language to learn, I found AutoIt the most suitable programming language for me (AutoIt FTW), any (very) similar languages to AutoIt?


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

TheDcoder,

If all you want is something similar, why not try to master AutoIt first. ;)

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

I want to develop programs for both linux & windows as autoit only supports only windows :(


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

If you're proficient in AutoIt then should know by now that a question such as this is a little vague, so I will provide some generic languages you could use on both. C#, Java, python, javascript, trypescript, ruby...etc.


_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 04/09/2015

Share this post


Link to post
Share on other sites

#5 ·  Posted (edited)

TheDcoder

You want too much at once. Windows and Linux are different. Set of properties of a window or files are different. What you have in Windows may not be available on Linux and vice versa. Linux uses Python. But it's hard to be retrained. In Python more difficult to make a window. In Python more difficult to fulfill mechanisms return errors. There is no documentation in the mother tongue. More precisely there is but not in full. By the way some of my programs written in AutoIt work using Wine.

To create a window into the AutoIt function is used GUICreate. To create a window in Python need to create a more complex structure. In AutoIt I made since the early days of GUI and continued to rack up its interesting teams. Unfortunately in Python I face constant problems: I can't create the menu in a tray, I learned two months how to make a window. Perhaps you're lucky more, it depends on your strength.
 

Edited by AZJIO
1 person likes this

Share this post


Link to post
Share on other sites

Do you mean Python?


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

Yes they did.


_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 04/09/2015

Share this post


Link to post
Share on other sites

@Dcoder - I'm sure you are not alone.

I for one, would love to be able to code in Linux (more precisely Android) like I do in Windows with AutoIt.

From my investigations, it is a steep learning curve of thinking in a different way ... this old dog is not sure he wants to learn that new trick.

It would be marvelous to see a creation of my own on my phone or a tablet, that did something I could really use. :D

At the moment, I've decided to pray to the expanding Universe and face Donut (like Mecca to some), for a miracle written in AutoIt, that will create Android apps (i.e. as a frontend). One lives in hope. o:)

Either that, or Jon & Team go into business and create their own AutoIt driven phone and tablet. :muttley:


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Make sure brain is in gear before opening mouth!
Remember, what is not said, can be just as important as what is said.

Spoiler

What is the Secret Key? Life is like a Donut

If I put effort into communication, I expect you to read properly & fully, or just not comment.
Ignoring those who try to divert conversation with irrelevancies.
If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it.
I'm only big and bad, to those who have an over-active imagination.

I may have the Artistic Liesense ;) to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage)

userbar.png

Share this post


Link to post
Share on other sites

Android Studio is one recommendation of mine if you want to great Android apps. I am in the process of learning it right now.


_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 04/09/2015

Share this post


Link to post
Share on other sites

#10 ·  Posted (edited)

I believe I looked at that a while back, just kind of briefly, and it appeared you really needed to be more conversant with Java than I am. It might be worth another look now, from what I've just seen on Wikipedia?

EDIT

So how long before you start working on that AutoIt frontend? :muttley:;):P

Edited by TheSaint

AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Make sure brain is in gear before opening mouth!
Remember, what is not said, can be just as important as what is said.

Spoiler

What is the Secret Key? Life is like a Donut

If I put effort into communication, I expect you to read properly & fully, or just not comment.
Ignoring those who try to divert conversation with irrelevancies.
If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it.
I'm only big and bad, to those who have an over-active imagination.

I may have the Artistic Liesense ;) to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage)

userbar.png

Share this post


Link to post
Share on other sites

Since we answer the "Does AutoIt work on other platforms?" question every couple of weeks, I say we have Jon figure out the cost of doing it, and we can then answer "Yes, it will, when we raise $x. You can donate here" :)

1 person likes this

√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites

Since we answer the "Does AutoIt work on other platforms?" question every couple of weeks, I say we have Jon figure out the cost of doing it, and we can then answer "Yes, it will, when we raise $x. You can donate here" :)

I think we should bypass most of that, and just start a fund for AutoIt to run on  :ILA3:  Linux. :muttley:

With small print saying we are not required to deliver on a such a herculean task ... and we don't give the money back of course.


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Make sure brain is in gear before opening mouth!
Remember, what is not said, can be just as important as what is said.

Spoiler

What is the Secret Key? Life is like a Donut

If I put effort into communication, I expect you to read properly & fully, or just not comment.
Ignoring those who try to divert conversation with irrelevancies.
If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it.
I'm only big and bad, to those who have an over-active imagination.

I may have the Artistic Liesense ;) to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage)

userbar.png

Share this post


Link to post
Share on other sites

Kickstarter?


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Something that Jon should see  :D


AutoIt.4.Life Clubrooms - Life is like a Donut (secret key)

Spoiler

My contributions to the AutoIt Community

Some messages & Apologizes:

If I hurt you, Please accept my apologies, I never (regardless of the situation) mean to hurt anybody!!!

Also, I am very busy with my project so I will appear in the last row of the online list, if you want to contact me: Email@TheDcoder.xyz

Or you can have a nice chat with me in freenode, I use the same nick on freenode too!

3fHNZJ.gif

PLEASE JOIN ##AutoIt AND HELP THE IRC AUTOIT COMMUNITY!

Share this post


Link to post
Share on other sites

We'd need Jon's input as to what it would take, both financially and time, to get it right. But if people can get $250k to study mushrooms on Kickstarter, I say we should be able to get AutoIt on Linux going :)

1 person likes this

√-1 2^3 ∑ π, and it was delicious!

Share this post


Link to post
Share on other sites

#19 ·  Posted (edited)

Apparently so, found one that runs in scite here

Seems like you need extra android software though, or perhaps your android device connected via USB in debug mode.

EDIT:

Half right, need an android emulator.

Explained in section 3.4 of the document on RFO basic website

Edited by JohnOne

AutoIt Absolute Beginners    Require a serial    Pause Script    Video Tutorials by Morthawt   ipify 

Monkey's are, like, natures humans.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • Ascer
      By Ascer
      1. Description
      Anti-bot system to avoid spam. Vector graphic style generates 4 random numbers from 0-9 and create a picture. 2. Requirements
      .NET Framework 1.1 - 4.5 (on this version Microsoft destroy old rules) 3. Possibilities.

      4. Downloads.
      Source package Capatcha.rar
    • Valnurat
      By Valnurat
      How can I get combobox value by using  the ENTER key?
    • vyperhand
      By vyperhand
      I'm struggling to launch a VBS file via autoit using RunWait.  Due to the nature of the deployment tool I am using for said script, I only know that the .vbs files will be in the same directory as my AutoIt-generated .exe, but not what that path will be.  The path will look something like this:
      c:\programdata\vendor\lots\of\folders\randomnumber
      This is generated during deployment and I have no way of predicting the path - therefore, I am not sure how to call back to "same directory" in order to successfully launch the .vbs.
      This line is as close as I have gotten - this fires off the cmd window, but it closes immediately with out information, and the .vbs is not launched.
      RunWait (@ComSpec & " /c" & 'cscript.exe WORKPLEASE.vbs ALL /Q /NoCancel') I thought /c might be the problem, but leaving out the /c element causes me not to even see the momentary CMD window flash by.  Any help will be greatly appreciated, and thanks in advance.
    • Valnurat
      By Valnurat
      I have a ComboBox and I want, when I start writting in it, that it will show me what is the first in the list.
      Like, is I start writting:
      "pe" it  should show me "peter" if that is the first in the list.
      How can I do that?
       
      While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idClos ExitLoop Case $idComboBox $sComboRead = GUICtrlRead($idComboBox) Local $iIdx = _ArraySearch($aResult,$sComboRead,0,0,0,0,1,1) Local $aComputerOwner = _AD_GetObjectsInOU("OU=al,DC=AD,DC=AL,DC=ORG","(&(objectclass=computer)(managedby=" & $aResult[$iIdx][0] & "))",Default,"cn") _ArrayDelete($aComputerOwner,0) _GUICtrlListView_SetItemCount($idMylist,UBound($aComputerOwner)) If IsArray($aComputerOwner) Then For $i = 0 To UBound($aComputerOwner) - 1 GUICtrlCreateListViewItem($aComputerOwner[$i], $idMylist) Next Else GUICtrlSetData($idMylist, "No computer|") EndIf EndSwitch WEnd  
    • Valnurat
      By Valnurat
      Hi.
      I'm trying to add an array to my gui listview, but it fails with
      "C:\Program Files (x86)\AutoIt3\Include\GuiListView.au3" (473) : ==> Array variable has incorrect number of subscripts or subscript dimension range exceeded.: DllStructSetData($tBuffer, "Text", $aItems[$iI][0]) DllStructSetData($tBuffer, "Text", ^ ERROR My code is:
      #cs ---------------------------------------------------------------------------- AutoIt Version: 3.3.14.2 Author: myName Script Function: Template AutoIt script. #ce ---------------------------------------------------------------------------- ; Script Start - Add your code below here #include <WindowsConstants.au3> #include <ComboConstants.au3> #include <GuiComboBox.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> #include <MsgBoxConstants.au3> #Include <AD.au3> #include <Array.au3> Opt('MustDeclareVars', 1) Global $aResult[0][2] Local $aNames[4] = ["DKSO","DKKO","SELU","SEES"] Local Const $iWidth = 300, $iHeight = 250, $iW = 85, $iH = 25 Local $hGUI = GUICreate("Find Computer Owner", $iWidth, $iHeight) ; Create a combobox control. Local $idComboBox = GUICtrlCreateCombo("", 2, 2, 296, 20, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL, $WS_VSCROLL, $CBS_SORT)) ;$WS_VSCROLL Local $idMylist = GUICtrlCreateListView("", 2, 114, 296, 100) Local $idClos = GUICtrlCreateButton("Close", ($iWidth - $iW) / 2, ($iHeight - $iH) - 7 , $iW, $iH) _AD_Open() Local $sFill = "" For $i = 0 to UBound($aNames) -1 Local $aUserInfo = _AD_GetObjectsInOU("OU=Al,DC=ad,DC=al,DC=org","(&(objectCategory=Person)(objectclass=user)(sAMAccountName=" & $aNames[$i] & "*))","","distinguishedName,cn") if @error Then MsgBox(0,@error,@extended) Exit EndIf For $x = $aUserInfo[0][0] To 1 Step -1 If $aUserInfo[$x][0] = "" Or StringInStr($aUserInfo[$x][0], "Resources") > 0 Or StringInStr($aUserInfo[$x][0], "Leavers") > 0 Or StringInStr($aUserInfo[$x][0], "Administration") > 0 Then _ArrayDelete($aUserInfo, $x) EndIf Next _ArrayConcatenate($aResult, $aUserInfo, 1) Next for $i = 0 To UBound($aResult) -1 If $aResult[$i][0] <> "" Then $sFill &= $aResult[$i][1] & "|" EndIf Next _ArrayDisplay($aResult, 'AD ' & UBound($aResult)) $sFill = StringTrimRight($sFill, 1) _GUICtrlComboBox_BeginUpdate($idComboBox) GUICtrlSetData($idComboBox, $sFill, "") _GUICtrlComboBox_EndUpdate($idComboBox) GUISetState(@SW_SHOW, $hGUI) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") _GUICtrlListView_AddColumn($idMylist, "Computername", 296) Local $sComboRead = "" ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idClos ExitLoop Case $idComboBox $sComboRead = GUICtrlRead($idComboBox) Local $iIdx = _ArraySearch($aResult,$sComboRead,0,0,0,0,1,1) Local $aComputerOwner = _AD_GetObjectsInOU("OU=al,DC=AD,DC=AL,DC=ORG","(&(objectclass=computer)(managedby=" & $aResult[$iIdx][0] & "))",Default,"cn") _ArrayDelete($aComputerOwner,0) _ArrayDisplay($aComputerOwner) _GUICtrlListView_SetItemCount($idMylist,UBound($aComputerOwner)) If IsArray($aComputerOwner) Then MsgBox(0,"Test",$sComboRead) _GUICtrlListView_AddArray($idMylist, $aComputerOwner) ; <---- it fails Else GUICtrlSetData($idMylist, "No computer|") EndIf EndSwitch WEnd _AD_Close() ; Delete the previous GUI and all controls. GUIDelete($hGUI) Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam Local $hWndFrom, $iIDFrom, $iCode, $tNMHDR, $hWndListView, $tInfo ; Local $tBuffer $hWndListView = $idMylist If Not IsHWnd($idMylist) Then $hWndListView = GUICtrlGetHandle($idMylist) $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iIDFrom = DllStructGetData($tNMHDR, "IDFrom") $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hWndListView Switch $iCode Case $NM_DBLCLK ; Sent by a list-view control when the user double-clicks an item with the left mouse button $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) _DebugPrint("$NM_DBLCLK" & @CRLF & "--> hWndFrom:" & @TAB & $hWndFrom & @CRLF & _ "-->IDFrom:" & @TAB & $iIDFrom & @CRLF & _ "-->Code:" & @TAB & $iCode & @CRLF & _ "-->Index:" & @TAB & DllStructGetData($tInfo, "Index") & @CRLF & _ "-->SubItem:" & @TAB & DllStructGetData($tInfo, "SubItem") & @CRLF & _ "-->NewState:" & @TAB & DllStructGetData($tInfo, "NewState") & @CRLF & _ "-->OldState:" & @TAB & DllStructGetData($tInfo, "OldState") & @CRLF & _ "-->Changed:" & @TAB & DllStructGetData($tInfo, "Changed") & @CRLF & _ "-->ActionX:" & @TAB & DllStructGetData($tInfo, "ActionX") & @CRLF & _ "-->ActionY:" & @TAB & DllStructGetData($tInfo, "ActionY") & @CRLF & _ "-->lParam:" & @TAB & DllStructGetData($tInfo, "lParam") & @CRLF & _ "-->KeyFlags:" & @TAB & DllStructGetData($tInfo, "KeyFlags")) ; No return value EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Func _DebugPrint($s_Text, $sLine = @ScriptLineNumber) ConsoleWrite( _ "!===========================================================" & @CRLF & _ "+======================================================" & @CRLF & _ "-->Line(" & StringFormat("%04d", $sLine) & "):" & @TAB & $s_Text & @CRLF & _ "+======================================================" & @CRLF) EndFunc ;==>_DebugPrint Do I do it wrong?
       
      Thank you in advanced.