emrecnl

Is it possible to use Firefox instead of IE if script is written for IE?

5 posts in this topic

Well I guess my title summarizes the question.

What do I need to change in script? Should I only edit IE paths to Firefox?

Share this post


Link to post
Share on other sites

emrecnl,

To automate FireFox you need to use the FireFox UDF which can be found here.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Hello. An  alternative can be using Selenium.

 

Saludos

Share this post


Link to post
Share on other sites

Thanks for the reply, so you're saying script has to be re-written in order to make it work with Firefox.

It's a basic script though, should open firefox,  then launch a web url and enter username password to that url. After that user will perform.

I attached an example script.

PSM-Fortigate.au3

Share this post


Link to post
Share on other sites

If you check the FF and IE UDFs you will notice that the function names are different. But not only the function names but the way it works is different.
So yes: You have to rewrite your script for FF.


My UDFs and Tutorials:

Spoiler

UDFs:
Active Directory (NEW 2017-04-18 - Version 1.4.8.0) - Download - General Help & Support - Example Scripts - Wiki
OutlookEX (NEW 2017-02-27 - Version 1.3.1.0) - Download - General Help & Support - Example Scripts - Wiki
ExcelChart (2015-04-01 - Version 0.4.0.0) - Download - General Help & Support - Example Scripts
Excel - Example Scripts - Wiki
Word - Wiki
PowerPoint (2015-06-06 - Version 0.0.5.0) - Download - General Help & Support

Tutorials:
ADO - Wiki

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • Faraz
      By Faraz
      I have to open a URL on Mozilla Firefox , cursor is by default userid textbox, had to send userid, send tab, send pwd with flag 1 , send tab, send Enter.
      But Script is Failing to take Password.
      Any Help
       
      #include <Constants.au3>
      #include <IE.au3>
      #include <PassMask.au3>
      If $CmdLine[0] <> 3 Then
          MsgBox($MB_OK, "Usage", "ps_weblogin_FireFox <Url> <Browser Title> <Text to Send>")
      Else
         web_login($CmdLine[1], $CmdLine[2], $CmdLine[3])
      EndIf
      Func web_login($bt_url, $bt_Title, $bt_SendText)
          Local $ff = Run("C:\Program Files (x86)\Mozilla Firefox\firefox.exe " & $bt_url)
              WinWaitActive($bt_Title)
          Sleep(2000)
          ControlSend("","","",$bt_SendText)
      EndFunc
      _______________________________________________
      _______________________________________________
      Func Mask_Password($Password)
          $MaskPassword = $Password
          $MaskPassword = StringReplace($MaskPassword, "#", "||||||#@@@@@@")
          $MaskPassword = StringReplace($MaskPassword, "!", "||||||!@@@@@@")
          $MaskPassword = StringReplace($MaskPassword, "+", "||||||+@@@@@@")
          $MaskPassword = StringReplace($MaskPassword, "^", "||||||^@@@@@@")
          $MaskPassword = StringReplace($MaskPassword, "{", "||||||{@@@@@@")
          $MaskPassword = StringReplace($MaskPassword, "}", "||||||}@@@@@@")
          $MaskPassword = StringReplace($MaskPassword, "||||||", "{")
          $MaskPassword = StringReplace($MaskPassword, "@@@@@@", "}")
          Return $MaskPassword
      EndFunc
    • Robdog1955
      By Robdog1955
      I'm trying to click a button on a web page. I have added a couple of MsgBox lines to allow me to watch what happens on the page. As you can see the first half of my script enters data into text boxes on the page. I have no problem there. I just cannot click on the region buttons. The "set focus" line causes an outline to appear around the EU button and the "click button" line causes the "Pick a Region" text to disappear. Here is the code I have so far.
      #include <IE.au3> Local $oIE = _IECreate("http://questchecker.com/") Local $iQuestID = "123456" Local $sCharacterName = "CharacterName" Local $colForms = _IEFormGetCollection($oIE) $iCount = 0 For $oForm In $colForms $oFormElements = _IEFormElementGetCollection($oForm) For $oFormElement In $oFormElements $iCount = $iCount + 1 Local $sTagName = StringLower($oFormElement.tagName) Local $sElementType = $oFormElement.type Local $sElementName = $oFormElement.name Switch $iCount Case 6 _IEFormElementSetValue($oFormElement, "MyRealm", 0) ; realm Case 7 _IEFormElementSetValue($oFormElement, $sCharacterName, 0) Case 8 _IEFormElementSetValue($oFormElement, $iQuestID, 0) EndSwitch Next Next Local $oButtons = _IEGetObjByName($oIE, "questForm") For $oButton In $oButtons If _IEFormElementGetValue($oButton) = "US" Then MsgBox(0, "", "Click Okay to set focus") _IEAction($oButton, "focus") MsgBox(0, "", "Click Okay to click button") _IEAction($oButton, "click") ExitLoop EndIf Next MsgBox(0, "", "Click Okay to quit") _IEQuit($oIE) Exit  
    • Dent
      By Dent
      As the title says. I open IE11 and navigate to a page with the following HTML5 file upload container in Capture0.JPG
      I want to click Add Files but I haven't been able to. Here's the code that handles the Add Files button in Capture.JPG
      _IEGetObjectById and then using _IEAction to click it doesn't work. I can't give access to the actual page unfortunately because it's password protected.
      All suggestions welcome.


    • milos83
      By milos83
      I have one script that creates _IECreateEmbedded and another script that does _IEAttach.
      I do this because when autoit is doing something, the Embedded IE starts stalling (eg jquery progress animation)
      But there is a new problem.
      When IE is having its own process (like in the example above) any _IE command is slow (in the script that Attaches).
      Here is a comparison of when its in separate and when its in same process:
      Separate process _IETagNameGetCollection : 5000ms
      Separate process _IEAction: 850ms
      Same process _IETagNameGetCollection : 1ms
      Same proccess _IEAction: 135ms
       
      If I try to attach to an embedded IE that is done in c#, I get lightning fast results.
      As you can see, _IE functions work very slow when the embedded IE we are attaching to is made in Autoit.
       
      I did a test and if I empty the WHILE loop in IE process I get these results(but the cpu is at 30% as expected):
      Separate process _IETagNameGetCollection : 33ms
      Separate process _IEAction: 13ms
       
      It slows down if you put anything (like GUIGetMsg) in the WHILE loop.
       
      How do I fix this?
       
      Create IE:
      #include <GUIConstantsEx.au3> #include <IE.au3> #include <WindowsConstants.au3> Local $oIE = _IECreateEmbedded() GUICreate("My Embedded Web control Test", 640, 580, (@DesktopWidth - 640) / 2, (@DesktopHeight - 580) / 2, $WS_OVERLAPPEDWINDOW + $WS_CLIPSIBLINGS + $WS_CLIPCHILDREN) GUICtrlCreateObj($oIE, 10, 40, 600, 360) GUISetState(@SW_SHOW) ;Show GUI _IENavigate($oIE, "http://www.autoitscript.com") $timer = TimerInit() $oLink = _IETagNameGetCollection($oIE, "a", 3) ;takes 1ms ConsoleWrite(TimerDiff($timer) & @CRLF) $timer = TimerInit() _IEAction($oLink, "click") ;takes 135ms ConsoleWrite(TimerDiff($timer) & @CRLF) While 1 Local $iMsg = GUIGetMsg() Select Case $iMsg = $GUI_EVENT_CLOSE ExitLoop EndSelect WEnd  
      Attach to IE:
      #include <IE.au3> Local $oIE = _IEAttach("My Embedded Web control Test", "embedded") $timer = TimerInit() $oLink = _IETagNameGetCollection($oIE, "a", 3) ; 5000ms ConsoleWrite(TimerDiff($timer) & @CRLF) $timer = TimerInit() _IEAction($oLink, "click") ; 850ms ConsoleWrite(TimerDiff($timer) & @CRLF)  
       
      attach.au3
      create.au3
    • nassausky
      By nassausky
      Hi all,
       
      Anyone have any idea how to close all open tabs except a specific one I manually open.  Assuming I don't know what is open in all the tabs except just the one I want to keep open.
       
      I didn't want to use sendkeys and I was trying to use the following code to list the title (or url) of the 3 open tabs and  after I got that part working I would just close the other 2. This sample only displays the title of the first open tab
      #include <IE.au3> Const $ie_new_in_tab = 0x0800 $oIE = _IECreate("https://www.autoitscript.com") __IENavigate($oIE, "https://www.autoitscript.com/forum/", 1, $ie_new_in_tab) ;(obj,url,wait,param) __IENavigate($oIE, "https://www.google.com/", 1, $ie_new_in_tab) ;(obj,url,wait,param) Local $aIE[1] $aIE[0] = 0 Local $i = 1, $oIE While 1     $oIE = _IEAttach("", "instance", $i)     If @error = $_IEStatus_NoMatch Then ExitLoop     ConsoleWrite(_IEPropertyGet($oIE, "title") & @CRLF)     ReDim $aIE[$i + 1]     $aIE[$i] = $oIE ;each item holds object     $aIE[0] = $i ;first item holds count     $i += 1 WEnd MsgBox($MB_SYSTEMMODAL, "Browsers Found", "Number of browser instances in the array: " & $aIE[0]) ; This doesn't return the list of tabs in the console just the first tab  
      Thanks for any and all help