Chimaera Posted October 1, 2013 Share Posted October 1, 2013 someone asked me to have a look at two xml files that they want as a single file Now they are xml file but saved as a nzb and i was asked if there is a way to make both files work when used as a single file the 2 e.g. are below <?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.nzbindex.com/nzb-1.0.dtd"> <!-- NZB Generated by NZBIndex --> <nzb xmlns="http://www.newzbin.com/DTD/2003/nzb"> <file poster="fake@address.com (Psychopath)" date="1380635164" subject="New eBooks 29 September 2013 - "9814-14074-31592.rar" yEnc (1/1)"> <groups> <group>alt.binaries.e-book</group> <group>alt.binaries.e-book.flood</group> </groups> <segments> <segment bytes="395417" number="1">524ad219$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> </nzb> <?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.newzbin.com/DTD/nzb/nzb-1.0.dtd"> <!-- NZB Generated by Binsearch.info (fcgi) --> <nzb xmlns="http://www.newzbin.com/DTD/2003/nzb"> <file poster="fake@address.com (Psychopath)" date="1380635157" subject="New eBooks 29 September 2013 - "894-8564-6882.rar" yEnc (1/1)"> <groups><group>alt.binaries.e-book</group></groups> <segments> <segment bytes="389484" number="1">524ad212$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> </nzb> now i see there are similarities and i tried a simple add this section to the other file but it doesnt work <file poster="fake@address.com (Psychopath)" date="1380635157" subject="New eBooks 29 September 2013 - "894-8564-6882.rar" yEnc (1/1)"> <groups><group>alt.binaries.e-book</group></groups> <segments> <segment bytes="389484" number="1">524ad212$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> Any suggestions? There are websites that you can multi add several files into one but i cant figure out how My eventual goal is to automate the joining of the files If Ive just helped you ... miracles do happen. Chimaera CopyRobo() * Hidden Admin Account Enabler * Software Location From Registry * Find Display Resolution * _ChangeServices() Link to comment Share on other sites More sharing options...
mLipok Posted October 1, 2013 Share Posted October 1, 2013 can you put here a schema file ? Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24 Link to comment Share on other sites More sharing options...
Chimaera Posted October 1, 2013 Author Share Posted October 1, 2013 (edited) which is what exactly? these are all the files i have. These are probably not xml in the purest sense as they relate to a different field Edited October 1, 2013 by Chimaera If Ive just helped you ... miracles do happen. Chimaera CopyRobo() * Hidden Admin Account Enabler * Software Location From Registry * Find Display Resolution * _ChangeServices() Link to comment Share on other sites More sharing options...
TheSaint Posted October 1, 2013 Share Posted October 1, 2013 The schema file sets up the formatting rules, etc. You need to consider how the resulting combined file is going to be read/used. If that doesn't matter, then you can mostly do what you want. However, if you are expecting to use it as a nzb file for downloading etc, then you need to know the rules ... and you may not be able to combine them acceptably. Make sure brain is in gear before opening mouth! Remember, what is not said, can be just as important as what is said. Spoiler What is the Secret Key? Life is like a Donut If I put effort into communication, I expect you to read properly & fully, or just not comment. Ignoring those who try to divert conversation with irrelevancies. If I'm intent on insulting you or being rude, I will be obvious, not ambiguous about it. I'm only big and bad, to those who have an over-active imagination. I may have the Artistic Liesense to disagree with you. TheSaint's Toolbox (be advised many downloads are not working due to ISP screwup with my storage) Link to comment Share on other sites More sharing options...
mLipok Posted October 1, 2013 Share Posted October 1, 2013 simply schema is a file like xml, but schema describe what you can do with xml http://www.w3schools.com/schema/default.asp Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24 Link to comment Share on other sites More sharing options...
cageman Posted October 1, 2013 Share Posted October 1, 2013 just compare the files joined together by some site and the files without joining and you see the trick? Link to comment Share on other sites More sharing options...
Chimaera Posted October 1, 2013 Author Share Posted October 1, 2013 (edited) The schema file sets up the formatting rules, etc. You need to consider how the resulting combined file is going to be read/used. If that doesn't matter, then you can mostly do what you want. However, if you are expecting to use it as a nzb file for downloading etc, then you need to know the rules ... and you may not be able to combine them acceptably. Yes that is exactly what it is for, the ones i have seen combined i think work because the same site generated them But in this instance they are from different sites simply schema is a file like xml, but schema describe what you can do with xml http://www.w3schools.com/schema/default.asp Thx ill have a read just compare the files joined together by some site and the files without joining and you see the trick? I have done just that at the start when i was asked, but i cant see a difference that would stand out. Other than the address here <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.nzbindex.com/nzb-1.0.dtd"> <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.newzbin.com/DTD/nzb/nzb-1.0.dtd"> I cant cycle through them that i know off The double from the same site looks like this just as an example <?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.nzbindex.com/nzb-1.0.dtd"> <!-- NZB Generated by NZBIndex --> <nzb xmlns="http://www.newzbin.com/DTD/2003/nzb"> <file poster="fake@address.com (Psychopath)" date="1380635162" subject="New eBooks 29 September 2013 - "98-3919-20011.rar" yEnc (1/3)"> <groups> <group>alt.binaries.e-book</group> <group>alt.binaries.e-book.flood</group> </groups> <segments> <segment bytes="397064" number="1">524ad217$0$58702$c3e8da3$12bcf670@news.astraweb.com</segment> <segment bytes="397357" number="2">524ad21b$0$58702$c3e8da3$12bcf670@news.astraweb.com</segment> <segment bytes="46444" number="3">524ad21e$0$58702$c3e8da3$12bcf670@news.astraweb.com</segment> </segments> </file> <file poster="fake@address.com (Psychopath)" date="1380635161" subject="New eBooks 29 September 2013 - "9172-5805-15030.rar" yEnc (1/2)"> <groups> <group>alt.binaries.e-book</group> <group>alt.binaries.e-book.flood</group> </groups> <segments> <segment bytes="397228" number="1">524ad215$1$58707$c3e8da3$12bcf670@news.astraweb.com</segment> <segment bytes="60556" number="2">524ad218$0$58707$c3e8da3$12bcf670@news.astraweb.com</segment> </segments> </file> </nzb> Just found this format for the nzb http://wiki.sabnzbd.org/nzb-specs Edited October 1, 2013 by Chimaera If Ive just helped you ... miracles do happen. Chimaera CopyRobo() * Hidden Admin Account Enabler * Software Location From Registry * Find Display Resolution * _ChangeServices() Link to comment Share on other sites More sharing options...
jdelaney Posted October 2, 2013 Share Posted October 2, 2013 (edited) $xml1 = @DesktopDir & "\1.xml" $xml2 = @DesktopDir & "\2.xml" $xmlCombined = @DesktopDir & "\Combo.xml" $oXML1 = ObjCreate("Microsoft.XMLDOM") $oXML2 = ObjCreate("Microsoft.XMLDOM") $oXML1.Load($xml1) $oXML2.Load($xml2) $oParent = $oXML1.selectSingleNode( '//nzb' ) $oChildToAppend = $oXML2.selectSingleNode( '//file' ) $oParent.appendChild($oChildToAppend) $oXML1.save($xmlCombined) unfortunately, the only way I could get it to work was to make the following element a comment (both files): <!--<!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.newzbin.com/DTD/nzb/nzb-1.0.dtd">--> snippet will show the basics of using the xml-dom to query and append nodes Output to 3rd file (assumption on my part...adding the file nodes inline with each other): <?xml version="1.0" encoding="iso-8859-1"?> <!--<!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.newzbin.com/DTD/nzb/nzb-1.0.dtd">--> <!-- NZB Generated by NZBIndex --> <nzb xmlns="http://www.newzbin.com/DTD/2003/nzb"> <file poster="fake@address.com (Psychopath)" date="1380635164" subject="New eBooks 29 September 2013 - "9814-14074-31592.rar" yEnc (1/1)"> <groups> <group>alt.binaries.e-book</group> <group>alt.binaries.e-book.flood</group> </groups> <segments> <segment bytes="395417" number="1">524ad219$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> <file poster="fake@address.com (Psychopath)" date="1380635157" subject="New eBooks 29 September 2013 - "894-8564-6882.rar" yEnc (1/1)"> <groups><group>alt.binaries.e-book</group></groups> <segments> <segment bytes="389484" number="1">524ad212$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> </nzb> Edited October 2, 2013 by jdelaney IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. Link to comment Share on other sites More sharing options...
Chimaera Posted October 2, 2013 Author Share Posted October 2, 2013 Thx for that i will do some tests later today and see if uploaded nzb can be done with that line commented out It may not be a necessary line but ill check Thx again to all If Ive just helped you ... miracles do happen. Chimaera CopyRobo() * Hidden Admin Account Enabler * Software Location From Registry * Find Display Resolution * _ChangeServices() Link to comment Share on other sites More sharing options...
jdelaney Posted October 2, 2013 Share Posted October 2, 2013 (edited) Here, this one is better...it will grab all the <file> nodes, and append each to the new file. It also comments, and then uncomments the DOCTYPE, so the XMLDom works, and then is in it's proper state at the end: #include <File.au3> $xml1 = @DesktopDir & "\1.xml" $xml2 = @DesktopDir & "\2.xml" $xmlCombined = @DesktopDir & "\Combo.xml" $sXml1 = FileRead($xml1) $sXml2 = FileRead($xml2) $sXML1 = StringRegExpReplace($sXML1,"(<!DOCTYPE\s*nzb.*?>)","<!--\1-->" ) $sXML2 = StringRegExpReplace($sXML2,"(<!DOCTYPE\s*nzb.*?>)","<!--\1-->" ) $oXML1 = ObjCreate("Microsoft.XMLDOM") $oXML2 = ObjCreate("Microsoft.XMLDOM") $oXML1.LoadXML($sXML1) $oXML2.LoadXML($sXML2) $oParent = $oXML1.selectSingleNode( '//nzb' ) $oChildToAppendCol = $oXML2.selectNodes( '//file' ) For $oChildToAppend In $oChildToAppendCol $oParent.appendChild($oChildToAppend) Next $sComboXML = StringRegExpReplace($oXML1.xml,"(<!--)(<!DOCTYPE\s*nzb.*?>)(-->)","\2" ) _FileCreate($xmlCombined) FileWrite($xmlCombined, $sComboXML) Modified your second XML to include two Files (but any number will work)...sample output in combo file: <?xml version="1.0"?> <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.nzbindex.com/nzb-1.0.dtd"> <!-- NZB Generated by NZBIndex --> <nzb xmlns="http://www.newzbin.com/DTD/2003/nzb"> <file poster="fake@address.com (Psychopath)" date="1380635164" subject="New eBooks 29 September 2013 - "9814-14074-31592.rar" yEnc (1/1)"> <groups> <group>alt.binaries.e-book</group> <group>alt.binaries.e-book.flood</group> </groups> <segments> <segment bytes="395417" number="1">524ad219$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> <file poster="fake@address.com (Psychopath)" date="1380635157" subject="New eBooks 29 September 2013 - "894-8564-6882.rar" yEnc (1/1)"> <groups><group>alt.binaries.e-book</group></groups> <segments> <segment bytes="389484" number="1">524ad212$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> <file poster="fake@address.com (Psychopath)" date="1380635157" subject="New eBooks 219 September 2013 - "894-8564-6882.rar" yEnc (1/1)"> <groups><group>alt.binaries.e-book</group></groups> <segments> <segment bytes="389484" number="1">524ad212$0$1190$c3e8da3$50776f34@news.astraweb.com</segment> </segments> </file> </nzb> Edited October 2, 2013 by jdelaney IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. Link to comment Share on other sites More sharing options...
Chimaera Posted October 2, 2013 Author Share Posted October 2, 2013 That runs and completes with no errors and makes the file but nothing inside it If Ive just helped you ... miracles do happen. Chimaera CopyRobo() * Hidden Admin Account Enabler * Software Location From Registry * Find Display Resolution * _ChangeServices() Link to comment Share on other sites More sharing options...
jdelaney Posted October 2, 2013 Share Posted October 2, 2013 (edited) You need to first un-comment these (if you were using my prior post, you modified the files from their true xml): <!--<!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.newzbin.com/DTD/nzb/nzb-1.0.dtd">--> back to <!DOCTYPE nzb PUBLIC "-//newzBin//DTD NZB 1.0//EN" "http://www.newzbin.com/DTD/nzb/nzb-1.0.dtd"> If you already did that, re-post the XML files you are using. Edited October 2, 2013 by jdelaney IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. Link to comment Share on other sites More sharing options...
Chimaera Posted October 2, 2013 Author Share Posted October 2, 2013 (edited) Been having a mess with this to make it do all the files in a folder and create one nzb But its not filling in the xml file after it creates it? #include <File.au3> #include <Array.au3> Local $sFiles = _NzbList(), $sComboXML Local $xmlCombined = @ScriptDir & "\Combo.nzb" _FileCreate($xmlCombined) FileWrite($xmlCombined, $sComboXML) Func _NzbList() Local $aNzbList = _FileListToArray(@ScriptDir, '*.nzb', 1) If @error Then Exit MsgBox(64, '', ' No Nzb Files Available ', 3) Else _ArrayDisplay($aNzbList) If IsArray($sFiles) Then For $i = 1 To $sFiles[0] $sXml1 = FileRead($sFiles[$i]) $sXML1 = StringRegExpReplace($sXML1,"(<!DOCTYPE\s*nzb.*?>)","<!--\1-->" ) $oXML1 = ObjCreate("Microsoft.XMLDOM") $oXML1.LoadXML($sXML1) $oParent = $oXML1.selectSingleNode( '//nzb' ) $oChildToAppendCol = $oXML1.selectNodes( '//file' ) For $oChildToAppend In $oChildToAppendCol $oParent.appendChild($oChildToAppend) Next $sComboXML = StringRegExpReplace($oXML1.xml,"(<!--)(<!DOCTYPE\s*nzb.*?>)(-->)","\2" ) Next EndIf EndIf EndFunc ;==>_NzbList() Can someone point me in the right direction plz? Edited October 2, 2013 by Chimaera If Ive just helped you ... miracles do happen. Chimaera CopyRobo() * Hidden Admin Account Enabler * Software Location From Registry * Find Display Resolution * _ChangeServices() Link to comment Share on other sites More sharing options...
jdelaney Posted October 2, 2013 Share Posted October 2, 2013 Here ya go: #include <File.au3> #include <Array.au3> $dir = @DesktopDir & "\XML" $sComboFile = $dir & "\Combo.xml" Local $aFiles[1] $aFiles = _FileListToArray($dir,"*",1) $oParentXML = ObjCreate("Microsoft.XMLDOM") $oTempXML = ObjCreate("Microsoft.XMLDOM") For $i = 1 To UBound($aFiles) - 1 $sXML = FileRead($dir & "\" & $aFiles[$i]) $sXML = StringRegExpReplace($sXML,"(<!DOCTYPE\s*nzb.*?>)","<!--\1-->" ) If $i = 1 Then $oParentXML.LoadXML($sXML) $oParentNode = $oParentXML.selectSingleNode( '//nzb' ) ConsoleWrite($oParentXML.xml & @CRLF) Else $oTempXML.LoadXML($sXML) $oTempNodeCol = $oTempXML.selectNodes( '//file' ) For $oTempNode In $oTempNodeCol $oParentNode.appendChild($oTempNode) Next EndIf Next $sComboAll = StringRegExpReplace($oParentXML.xml,"(<!--)(<!DOCTYPE\s*nzb.*?>)(-->)","\2" ) _FileCreate($sComboFile) FileWrite($sComboFile, $sComboAll) IEbyXPATH-Grab IE DOM objects by XPATH IEscriptRecord-Makings of an IE script recorder ExcelFromXML-Create Excel docs without excel installed GetAllWindowControls-Output all control data on a given window. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now