Jump to content
AndroidZero

Compiled Script don't work - (Moved)

Recommended Posts

Hej guys,

when I run this small code in my AutoIT Editor it works ..but when I compile it and run it I get an Error and can't figure out the problem.

#include <MSSQL.au3>

MsgBox(0,"TestLine","",2)
$mscon = _MSSQL_Con("192.168.XXX.XXX","XXX","XXXXXXX","XXX")
;~ $arr = _MSSQL_GetRecord($mscon, "berichte", "*")
_MSSQL_End($mscon)

image.png.7ed1801586e05325d2f567aecb3be6d4.png

Here is the MSSQL UDF

; #CURRENT# =====================================================================================================================
;~ _MSSQL_Con
;~ _MSSQL_Query
;~ _MSSQL_End
;~ _MSSQL_CreateTable
;~ _MSSQL_CreateColumn
;~ _MSSQL_AddRecord
;~ _MSSQL_GetRecord
;~ _MSSQL_TableExist
;~ _MSSQL_ColumnExist
;~ _MSSQL_ListAllColumns
;~ _MSSQL_ListAllTables
;~ _MSSQL_GetColumninfo
;~ _MSSQL_UpdateRecord
;~ _MSSQL_DeleteRecord
;~ _MSSQL_DropColumn
;~ _MSSQL_DropTable
; ===============================================================================================================================


;===============================================================================
;
; Function Name....:    _MSSQL_CreateTable
; Description......:    Creates a New Table
; Syntax...........:    _MSSQL_CreateTable($oConnectionObj, $sTable, $identity, $Columnname)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename to create
;                       $identity = [optional] Should there be a Primarykey (Standard = TRUE)
;                       $Columnname = [optional] If no Primarykey is created, name of the first Column
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $sTable already exists, @extended
;.........@extended:        |1 - $oConnectionObj is not an object
;                           |2 - $sTable already exists
;                           |3 - $aResult is not an array ( not happened yet, but maybe possible)
;                           |4 - Query Error, Query saved to @extended (Check permissions to sys.tables)
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================

Func _MSSQL_CreateTable($oConnectionObj, $sTable, $identity = True, $Columnname = "ID")
    Local $sPrimeKey = "ID", $str, $tableexist
    If IsObj($oConnectionObj) And Not @error Then
        $tableexist = _MSSQL_TableExist($oConnectionObj, $sTable)
        If $tableexist = 1 Then Return SetError(2, @error, 0)
        If $identity = True Then
            $str = "CREATE TABLE " & $sTable & " (" & $sPrimeKey & " int IDENTITY (1,1) PRIMARY KEY) ;"
        Else
            $str = "CREATE TABLE " & $sTable & " (" & $Columnname & ");"
        EndIf
        $oConnectionObj.execute($str)
        Return 1
    ElseIf @error Then
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_CreateTable

;===============================================================================
;
; Function Name....:    _MSSQL_CreateColumn
; Description......:    Create one or more new Columns
; Syntax...........:    _MSSQL_CreateColumn($oConnectionObj, $sTable, $sColumn, $Null = "NULL", $sDataType = "VARCHAR(45)")
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $sColumn = Columnname and Type
;                       $Null = [optional] Allow Zero (Standard = True)
;                       $sDataType = [optional] If $sColumn is an 1-D Array, sets the Columtype for all Columns (Standard = "VARCHAR(45)")
; Requirement......:    If $sColumn is an array, it has to be indexed 1,
;                           - If $sColumn is an 2-D Array, the Columnname has to be in $avArray[$i][0], the datatype has to be in $avArray[0][$i]
;                       If $sColumn is a String ist, it has to be formated like this:
;                           - "Name1 varchar(50),Name2 varchar(50),Name3 varchar(50),Name4  varchar(50),NameN Datatype"
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $sColumn has more than 2 dimensions
;                       |3 - A Columnname from $sColumn already exists in Database
;                           - The Columnname is saved in @extended
;                       |4 - A Columnname from $sColumn occurs more than 1 time in the $sColumn
;                           - The Columnname is saved in @extended
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_CreateColumn($oConnectionObj, $sTable, $sColumn, $Null = True, $sDataType = "VARCHAR(45)")
    Local $str, $Result, $Columnsplit, $Columnsplit2
    If IsObj($oConnectionObj) And Not @error Then
        If IsArray($sColumn) Then
            If UBound($sColumn, 2) = 2 Then
                $str = "ALTER TABLE " & $sTable & " ADD "
                If $Null = True Then
                    For $i = 1 To UBound($sColumn) - 1
                        If StringInStr($str, $sColumn[$i][0]) <> 0 Then Return SetError(4, $sColumn[$i][0], 0)
                        $str &= "" & $sColumn[$i][0] & " " & $sColumn[$i][1] & " NULL,"
                    Next
                Else
                    For $i = 1 To UBound($sColumn) - 1
                        If StringInStr($str, $sColumn[$i][0]) <> 0 Then Return SetError(4, $sColumn[$i][0], 0)
                        $str &= "" & $sColumn[$i][0] & " " & $sColumn[$i][1] & ","
                    Next
                EndIf
                For $i = 1 To UBound($sColumn) - 1
                    $Result = _MSSQL_ColumnExist($oConnectionObj, $sTable, $sColumn[$i][0])
                    If $Result = 1 Then Return SetError(3, $sColumn[$i][0], 0)
                Next

            ElseIf UBound($sColumn, 2) = 0 And @error = 2 Then
                $str = "ALTER TABLE " & $sTable & " ADD "
                If $Null = "Null" Then
                    For $i = 1 To UBound($sColumn) - 1
                        If StringInStr($str, $sColumn[$i]) <> 0 Then Return SetError(4, $sColumn[$i], 0)
                        $str &= "" & $sColumn[$i] & " " & $sDataType & " NULL,"
                    Next
                Else
                    For $i = 1 To UBound($sColumn) - 1
                        If StringInStr($str, $sColumn[$i]) <> 0 Then Return SetError(4, $sColumn[$i], 0)
                        $str &= "" & $sColumn[$i] & " " & $sDataType & ","
                    Next
                EndIf
                For $i = 1 To UBound($sColumn) - 1
                    $Result = _MSSQL_ColumnExist($oConnectionObj, $sTable, $sColumn[$i])
                    If $Result = 1 Then Return SetError(3, $sColumn[$i], 0)
                Next
            Else
                Return SetError(2, 0, 0)
            EndIf
            $str = StringTrimRight($str, 1) & ";"
            $oConnectionObj.execute($str)
        Else
            $str = "ALTER TABLE " & $sTable & " ADD " & $sColumn & ";"
            $Columnsplit = StringSplit($sColumn, ",")
            For $i = 1 To $Columnsplit[0]
                $Columnsplit2 = StringSplit($Columnsplit[$i], " ")
                $Result = _MSSQL_ColumnExist($oConnectionObj, $sTable, $Columnsplit2[1])
                If $Result = 1 Then Return SetError(3, $Columnsplit2[1], 0)
            Next
            $oConnectionObj.execute($str)
            Return 1
        EndIf
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_CreateColumn
;===============================================================================
;
; Function Name....:    _MSSQL_AddRecord
; Description......:    Creates a new Row in the database
; Syntax...........:    _MSSQL_AddRecord($oConnectionObj, $sTable, $Values, $UNIQUE, $condition)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $Values = Values to be inserted into the table
;                       $UNIQUE = [optional] Set to True to avoid double data
;                       $condition = [optional] condition, how to determine double data
; Requirement......:    You need to add a Value for each Column in the Table
;                       If $Values is an Array , it has to be indexed 1,
;                       If $Values is a String , it has to be formated like this:
;                       - 'Value1', 'Value2', 'Value3', 'Value4', 'Value5', 'Value n'
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $condition was not set
;                       |3 - Only returned if $UNIQUE = True
;                               - All Values already in Database
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_AddRecord($oConnectionObj, $sTable, $Values, $UNIQUE = False, $condition = "")
    Local $str, $check
    If IsObj($oConnectionObj) And Not @error Then
        If IsArray($Values) Then
            If UBound($Values, 2) = 0 Then
                $str = "INSERT INTO " & $sTable & " VALUES('"
                For $grades = 1 To UBound($Values) - 1
                    If $UNIQUE = False Then
                        $str &= $Values[$grades] & "', '"
                    Else
                        If $condition = "" Then Return SetError(2, 0, 0)
                        $check = _MSSQL_GetRecord($oConnectionObj, $sTable, "*", $condition)
                        If @error = 4 Then
                            $str &= $Values[$grades] & "', '"
                        EndIf
                    EndIf
                Next
                $str = StringTrimRight($str, 3) & ");"
                ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $str = ' & $str & @crlf & '>Error code: ' & @error & @crlf) ;### Debug Console
                If StringRight($str, 7) = "VALUE);" Then Return SetError(3, 0, 0)
                $oConnectionObj.execute($str)
                Return 1
            Else
                For $rows = 1 To UBound($Values) - 1
                    $str = "INSERT INTO " & $sTable & " VALUES('"
                    For $grades = 1 To UBound($Values, 2) - 1
                        If $UNIQUE = False Then
                            $str &= $Values[$rows][$grades] & "', '"
                        Else
                            If $condition = "" Then Return SetError(2, 0, 0)
                            $check = _MSSQL_GetRecord($oConnectionObj, $sTable, "*", $condition)
                            If @error = 4 Then
                                $str &= $Values[$rows][$grades] & "', '"
                            EndIf
                        EndIf
                    Next
                    $str = StringTrimRight($str, 3) & ");"
                    ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $str = ' & $str & @crlf & '>Error code: ' & @error & @crlf) ;### Debug Console
                    If StringRight($str, 7) = "VALUE);" Then Return SetError(3, 0, 0)
                    $oConnectionObj.execute($str)
                Next
                Return 1
            EndIf
        Else
            If $UNIQUE = False Then
                $str = "INSERT INTO " & $sTable & " VALUES(" & $Values & ");"
            Else
                If $condition = "" Then Return SetError(2, 0, 0)
                $check = _MSSQL_GetRecord($oConnectionObj, $sTable, "*", $condition)
                If @error = 4 Then
                    $str = "INSERT INTO " & $sTable & " VALUES(" & $Values & ");"
                Else
                    Return SetError(3, 0, 0)
                EndIf
            EndIf
            $oConnectionObj.execute($str)
            Return 1
        EndIf
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_AddRecord
;===============================================================================
;
; Function Name....:    _MSSQL_GetRecord
; Description......:    Get one or more Values from Database
; Syntax...........:    _MSSQL_GetRecord($oConnectionObj, $sTable, $Columns = "*", $condition = "", $order = "")
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $sColumn = [optional] Name of one or more Columns in the Table [ Standard = "*" (all Columns)]
;                       $condition = [optional] A WHERE Case, to look for special Values [Standard = "" (all Values)]
;                                       - The datafields in the WHERE Case have to be like this:  'VALUE'
;                       $order = [optional] ORDER BY Case, to sort the returned values [Standard = "" (no order)]
; Requirement......:    If $sColumn is an Array it has to be indexed 1,
;                           - $sColumn contains the Columns to read from
; Return Value(s)..:    Success - Returns an array
;                                   - If you searched in only one column, $aResult is a 1-D Array, where $aResult[0] is the number of found values
;                                   - If you searched in more then one column, $aResult is multidimensional, where $aResult[0][n] is the number of found values
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $aResult is not an array ( not happened yet, but msaybe possible)
;                       |3 - $sColumn is not an 1-D array
;                       |4 - Query Error, Query saved to @extended
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_GetRecord($oConnectionObj, $sTable, $Columns = "*", $condition = "", $order = "")
    Local $str, $quer, $aResult, $iColumns, $iRows
    If IsObj($oConnectionObj) And Not @error Then
        If IsArray($Columns) Then
            If UBound($Columns, 2) - 1 <> 1 Then Return SetError(3, 0, 0)
            $str = "SELECT '"
            For $i = 1 To UBound($Columns) - 1
                $str &= $Columns[$i] & "','"
            Next
            If $order = "" Then
                $str = StringTrimRight($str, 2) & "FROM " & $sTable & " " & $condition & ";"
            Else
                $str = StringTrimRight($str, 2) & "FROM " & $sTable & " " & $condition & " ORDER BY " & $order & " ;"
            EndIf
            $quer = $oConnectionObj.execute($str)
            With $quer
                If Not .EOF Then
                    $aResult = .GetRows()
                    If IsArray($aResult) And UBound($aResult, 2) > 1 Then
                        $iColumns = UBound($aResult, 2)
                        $iRows = UBound($aResult)
                        ReDim $aResult[$iRows + 1][$iColumns]
                        For $x = $iRows To 1 Step -1
                            For $y = 0 To $iColumns - 1
                                $aResult[$x][$y] = $aResult[$x - 1][$y]
                            Next
                        Next
                        For $i = 0 To $iColumns - 1
                            $aResult[0][$i] = .Fields($i).Name
                        Next
                    ElseIf IsArray($aResult) And UBound($aResult, 2) = 1 Then
                        $iRows = UBound($aResult)
                        Local $bResult[$iRows + 1]
                        For $x = $iRows To 1 Step -1
                            $bResult[$x] = $aResult[$x - 1][0]
                        Next
                        $bResult[0] = $iRows
                        Return $bResult
                    Else
                        Return SetError(2, 0, 0)
                    EndIf
                Else
                    Return SetError(4, $str, 0)
                EndIf
            EndWith
            Return $aResult
        Else
            If $order = "" Then
                If $Columns = "*" Then
                    $quer = $oConnectionObj.execute("SELECT " & $Columns & " FROM " & $sTable & " " & $condition & ";")
                Else
                    $quer = $oConnectionObj.execute("SELECT '" & $Columns & "' FROM " & $sTable & " " & $condition & ";")
                EndIf
            Else
                If $Columns = "*" Then
                    $quer = $oConnectionObj.execute("SELECT " & $Columns & " FROM " & $sTable & " " & $condition & " ORDER BY " & $order & " ;")
                Else
                    $quer = $oConnectionObj.execute("SELECT '" & $Columns & "' FROM " & $sTable & " " & $condition & " ORDER BY " & $order & " ;")
                EndIf
            EndIf
            If Not $quer.EOF Then
                $aResult = $quer.GetRows()
                If IsArray($aResult) And UBound($aResult, 2) > 1 Then
                    $iColumns = UBound($aResult, 2)
                    $iRows = UBound($aResult)
                    ReDim $aResult[$iRows + 1][$iColumns]
                    For $x = $iRows To 1 Step -1
                        For $y = 0 To $iColumns - 1
                            $aResult[$x][$y] = $aResult[$x - 1][$y]
                        Next
                    Next
                    For $i = 0 To $iColumns - 1
                        $aResult[0][$i] = $quer.Fields($i).Name
                    Next
                ElseIf IsArray($aResult) And UBound($aResult, 2) = 1 Then
                    $iRows = UBound($aResult)
                    Local $bResult[$iRows + 1]
                    For $x = $iRows To 1 Step -1
                        $bResult[$x] = $aResult[$x - 1][0]
                    Next
                    $bResult[0] = $iRows
                    Return $bResult
                Else
                    Return SetError(2, 0, 0)
                EndIf
            Else
                Return SetError(4, $str, 0)
            EndIf
            Return $aResult
        EndIf
    EndIf
    Return SetError(1, 0, 0)
EndFunc   ;==>_MSSQL_GetRecord
;===============================================================================
;
; Function Name....:    _MSSQL_TableExist
; Description......:    Checks, if a Table Exists
; Syntax...........:    _MSSQL_TableExist($oConnectionObj, $sTable)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - Table not found
;                       |3 - Query Error, Query saved to @extended (Check Permissions on sys.tables)
;                           - also Returned when Table does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================

Func _MSSQL_TableExist($oConnectionObj, $sTable)
    Local $quer
    If IsObj($oConnectionObj) And Not @error Then
        $quer = $oConnectionObj.execute("SELECT TABLE_SCHEMA FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = '" & $sTable & "';")
        If Not $quer.EOF Then
            Return 1
        Else
            Return SetError(3, "SELECT TABLE_SCHEMA FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = '" & $sTable & "';", 0)
        EndIf
        Return SetError(2, 0, 0)
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_TableExist
;===============================================================================
;
; Function Name....:    _MSSQL_ColumnExist
; Description......:    Checks if a Column exists
; Syntax...........:    _MSSQL_ColumnExist($oConnectionObj, $sTable, $sColumn)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $sColumn = Columnname
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - Column not found
;                       |3 - Table not found
;                       |3 - Query Error, Query saved to @extended (Check Permissions on sys.columns)
;                           - also Returned when Column does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_ColumnExist($oConnectionObj, $sTable, $sColumn)
    Local $quer
    If IsObj($oConnectionObj) And Not @error Then
        If not _MSSQL_TableExist($oConnectionObj, $sTable) Then Return SetError(3,0,0)
        $quer = $oConnectionObj.execute("SELECT TABLE_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE COLUMN_NAME = '" & $sColumn & "' AND TABLE_NAME = '" & $sTable & "';")
        If Not $quer.EOF Then
            Return 1
        Else
            Return SetError(4, "SELECT TABLE_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE COLUMN_NAME = '" & $sColumn & "' AND TABLE_NAME = '" & $sTable & "';", 0)
        EndIf
        Return SetError(2, 0, 0)
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_ColumnExist
;===============================================================================
;
; Function Name....:    _MSSQL_Con
; Description......:    Connect to a Database
; Syntax...........:    _MSSQL_Con($scIP, $scUser, $scPass, $scDB)
; Parameter(s).....:    $scIP = IP adress
;                       $scUser = User
;                       $scPass = Pass
;                       $scDB = Database
; Return Value(s)..:    Success - Returns the Database-"handle"
;
;===============================================================================
Func _MSSQL_Con($scIP, $scUser, $scPass, $scDB)
    Local $sqlCon
    $sqlCon = ObjCreate("ADODB.Connection")
    $sqlCon.Open("Provider=SQLOLEDB; Data Source=" & $scIP & "; User ID=" & $scUser & "; Password=" & $scPass & "; database=" & $scDB & ";")
    Return $sqlCon
EndFunc   ;==>_MSSQL_Con
;===============================================================================
;
; Function Name....:    _MSSQL_Query
; Description......:    Send a Query to the Database
; Syntax...........:    _MSSQL_Query($iSQLCon, $iQuery)
; Parameter(s).....:    $iSQLCon = $oConnectionObj = Object, returned by _MSSQL_Con
;                       $iQuery = MSSQL Query
; Return Value(s)..:    Success - Returns the Response from the server
;
;===============================================================================
Func _MSSQL_Query($iSQLCon, $iQuery)
    If IsObj($iSQLCon) Then
        Return $iSQLCon.execute($iQuery)
    EndIf
EndFunc   ;==>_MSSQL_Query
;===============================================================================
;
; Function Name....:    _MSSQL_End
; Description......:    Close SQL Session
; Syntax...........:    _MSSQL_End($sqlCon)
; Parameter(s).....:    $sqlCon = $oConnectionObj = Object, returned by _MSSQL_Con
; Return Value(s)..:    -
;
;===============================================================================
Func _MSSQL_End($sqlCon)
    If IsObj($sqlCon) Then
        $sqlCon.close
    EndIf
EndFunc   ;==>_MSSQL_End
;===============================================================================
;
; Function Name....:    _MSSQL_ListAllColumns
; Description......:    List all Columns from an existing Table
; Syntax...........:    _MSSQL_ListAllColumns($oConnectionObj, $sTable)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
; Return Value(s)..:    Success - Returns an Array
;                       - $aResult[0] returns the number of Columns
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $aResult is not an array ( not happened yet, but maybe possible)
;                       |3 - $sTable does not exist
;                       |4 - Query Error, Query saved to @extended
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_ListAllColumns($oConnectionObj, $sTable)
    Local $quer, $aResult, $iRows
    If IsObj($oConnectionObj) And Not @error Then
        If not _MSSQL_TableExist($oConnectionObj, $sTable) Then Return SetError(3,0,0)
        $quer = $oConnectionObj.execute("SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '" & $sTable & "';")
        If Not $quer.EOF Then
            $aResult = $quer.GetRows()
            If IsArray($aResult) And UBound($aResult, 2) = 1 Then
                $iRows = UBound($aResult)
                Local $bResult[$iRows + 1]
                For $x = $iRows To 1 Step -1
                    $bResult[$x] = $aResult[$x - 1][0]
                Next
                $bResult[0] = $iRows
                Return $bResult
            Else
                Return SetError(2, 0, 0)
            EndIf
        Else
            Return SetError(4, "SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '" & $sTable & "';", 0)
        EndIf
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_ListAllColumns
;===============================================================================
;
; Function Name....:    _MSSQL_ListAllTables
; Description......:    List all tables from the database
; Syntax...........:    _MSSQL_ListAllTables($oConnectionObj)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
; Return Value(s)..:    Success - Returns an 2-D Array
;                                   - $Return[0][0]  = number of tables
;                                   - $Return[$i][n] = Tablename
;                                   - $Return[$i][n] = Table Type
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $aResult is not an array ( not happened yet, but maybe possible)
;                       |3 - No permissions to INFORMATION_SCHEMA.TABLES
;                           - also returned, if no Tables exist at all
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_ListAllTables($oConnectionObj)
    Local $quer, $aResult, $iColumns, $iRows
    If IsObj($oConnectionObj) And Not @error Then
        $quer = $oConnectionObj.execute("SELECT TABLE_NAME, TABLE_TYPE FROM INFORMATION_SCHEMA.TABLES;")
        If Not $quer.EOF Then
            $aResult = $quer.GetRows()
            If IsArray($aResult) And UBound($aResult, 2) = 2 Then
                $iColumns = UBound($aResult, 2)
                $iRows = UBound($aResult)
                ReDim $aResult[$iRows + 1][$iColumns]
                For $x = $iRows To 1 Step -1
                    For $y = 0 To $iColumns - 1
                        $aResult[$x][$y] = $aResult[$x - 1][$y]
                    Next
                Next
                $aResult[0][0] = $iRows
                $aResult[0][1] = ""
                Return $aResult
            Else
                Return SetError(2, 0, 0)
            EndIf
        Else
            Return SetError(3, 0, 0)
        EndIf
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_ListAllTables
;===============================================================================
;
; Function Name....:    _MSSQL_GetColumninfo
; Description......:    Get Information about a Column
; Syntax...........:    _MSSQL_GetColumninfo($oConnectionObj, $sTable, $sColumn = "Allcolumns")
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $sColumn = [optional] Column to get info about (Standard = AllColumns)
; Return Value(s)..:    Success - Returns an multidimensional Array
;                       - $Return[$i][0] = Name of the Column
;                       - $Return[$i][1] = Allow Zero
;                       - In $Return[$i][2] = Datatype
;                       - In $Return[$i][3] = Max Character Lenght
;                       - In $Return[$i][4] = COLLATION NAME (i.E. latin1)
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $aResult is not an array ( not happened yet, but maybe possible)
;                       |3 - $sTable or $sColumn does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_GetColumninfo($oConnectionObj, $sTable, $sColumn = "Allcolumns")
    Local $quer, $aResult, $iColumns, $iRows
    If IsObj($oConnectionObj) And Not @error Then
        If $sColumn = "Allcolumns" Then
            $quer = $oConnectionObj.execute("SELECT COLUMN_NAME, IS_NULLABLE, DATA_TYPE, CHARACTER_MAXIMUM_LENGTH, COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '" & $sTable & "';")
        Else
            $quer = $oConnectionObj.execute("SELECT COLUMN_NAME, IS_NULLABLE, DATA_TYPE, CHARACTER_MAXIMUM_LENGTH, COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '" & $sTable & "' AND COLUMN_NAME = '" & $sColumn & "';")
        EndIf
        If Not $quer.EOF Then
            $aResult = $quer.GetRows()
            If IsArray($aResult) And UBound($aResult, 2) > 1 Then
                $iColumns = UBound($aResult, 2)
                $iRows = UBound($aResult)
                ReDim $aResult[$iRows + 1][$iColumns]
                For $x = $iRows To 1 Step -1
                    For $y = 0 To $iColumns - 1
                        $aResult[$x][$y] = $aResult[$x - 1][$y]
                    Next
                Next
                For $i = 0 To $iColumns - 1
                    $aResult[0][$i] = $quer.Fields($i).Name
                Next
                Return $aResult
            Else
                Return SetError(2, 0, 0)
            EndIf
        Else
            Return SetError(3, 0, 0)
        EndIf
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_GetColumninfo
;===============================================================================
;
; Function Name....:    _MSSQL_UpdateRecord
; Description......:    Update one or more Values
; Syntax...........:    _MSSQL_UpdateRecord($oConnectionObj, $sTable, $sColumn , $sValue, $condition = "")
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $sColumn = Columnname to update Value in
;                       $sValue = Value to change into
;                       $condition = [optional] A WHERE Case, to limit the found Values [Standard = "" (all Values in a Column)]
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $sTable does not exist
;                       |3 - $sColumn does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_UpdateRecord($oConnectionObj, $sTable, $sColumn, $sValue, $condition = "")
    Local $tableexist, $columnexist, $str, $quer
    If IsObj($oConnectionObj) And Not @error Then
        $tableexist = _MSSQL_TableExist($oConnectionObj, $sTable)
        If $tableexist = 0 Then Return SetError(2, 0, 0)
        $columnexist = _MSSQL_ColumnExist($oConnectionObj, $sTable, $sColumn)
        If $columnexist = 0 Then Return SetError(3, 0, 0)
        If $condition = "" Then
            $str = "UPDATE " & $sTable & " SET " & $sColumn & " = " & $sValue & ";"
            $quer = $oConnectionObj.execute($str)
        Else
            $str = "UPDATE " & $sTable & " SET " & $sColumn & " = " & $sValue & " " & $condition & ";"
            $quer = $oConnectionObj.execute($str)
        EndIf
        Return 1
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_UpdateRecord
;===============================================================================
;
; Function Name....:    _MSSQL_DeleteRecord
; Description......:    Delete one or more Rows from a Table
; Syntax...........:    _MSSQL_DeleteRecord($oConnectionObj, $sTable, $condition = "")
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
;                       $condition = [optional] A WHERE Case, to limit deleted rows [Standard = "" (all rows in table)]
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $sTable does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_DeleteRecord($oConnectionObj, $sTable, $condition = "")
    Local $tableexist, $columnexist, $str, $quer
    If IsObj($oConnectionObj) And Not @error Then
        $tableexist = _MSSQL_TableExist($oConnectionObj, $sTable)
        If $tableexist = 0 Then Return SetError(2, 0, 0)
        If $condition = "" Then
            $str = "DELETE FROM " & $sTable & ";"
            $quer = $oConnectionObj.execute($str)
        Else
            $str = "DELETE FROM " & $sTable & " " & $condition & ";"
            $quer = $oConnectionObj.execute($str)
        EndIf
        Return 1
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_DeleteRecord

;===============================================================================
;
; Function Name....:    _MSSQL_DropTable
; Description......:    Delete a Table from Database
; Syntax...........:    _MSSQL_DropTable($oConnectionObj, $sTable)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $sTable does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_DropTable($oConnectionObj, $sTable)
    If IsObj($oConnectionObj) And Not @error Then
        If Not _MSSQL_TableExist($oConnectionObj, $sTable) Then Return SetError(2, 0, 0)
        $str = "DROP TABLE " & $sTable & ";"
        $quer = $oConnectionObj.execute($str)
        Return 1
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_DropTable
;===============================================================================
;
; Function Name....:    _MSSQL_DropColumn
; Description......:    Delete a Column from a Table
; Syntax...........:    _MSSQL_DropColumn($oConnectionObj, $sTable)
; Parameter(s).....:    $oConnectionObj = Object, returned by _MSSQL_Con
;                       $sTable = Tablename
; Return Value(s)..:    Success - 1
;                       Failure - 0, sets @error
;                       |1 - $oConnectionObj is not an object
;                       |2 - $sTable does not exist
;                       |3 - $sColumn does not exist
; Author(s)........:    TheLuBu <LuBu@veytal.com>
;
;===============================================================================
Func _MSSQL_DropColumn($oConnectionObj, $sTable, $sColumn)
    If IsObj($oConnectionObj) And Not @error Then
        If Not _MSSQL_TableExist($oConnectionObj, $sTable) Then Return SetError(2, 0, 0)
        If Not _MSSQL_ColumnExist($oConnectionObj, $sTable, $sColumn) Then Return SetError(3, 0, 0)
        $str = "ALTER TABLE " & $sTable & " DROP COLUMN " & $sColumn & ";"
        $quer = $oConnectionObj.execute($str)
        Return 1
    Else
        Return SetError(1, 0, 0)
    EndIf
EndFunc   ;==>_MSSQL_DropColumn

 

Share this post


Link to post
Share on other sites
Posted (edited)

As you are on start with using ADO (I suppose) ..... I suggest to you to use my ADO.au3 UDF.
 

Edited by mLipok

Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest begining - comunication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library *

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF *

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

11

Signature last update: 2018-10-31

Share this post


Link to post
Share on other sites

Moved to the appropriate forum, as the Developer General Discussion forum very clearly states:

Quote

General development and scripting discussions. If it's super geeky and you don't know where to put it - it's probably here.


Do not create AutoIt-related topics here, use the AutoIt General Help and Support or AutoIt Technical Discussion forums.

Moderation Team


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind

Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...