Jump to content
akira2891

AutoIt debugger

Recommended Posts

akira2891

Hi, is there any valid and working debugger for AutoIt code ?

Share this post


Link to post
Share on other sites
Melba23

akira2891,

Have you tried searching the forum? I doubt it, because there are a few out there that seem to work.

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
akira2891

I try but nothing seems to works

Share this post


Link to post
Share on other sites
Melba23

akira2891,

Do you mean you can find nothing - or that nothing you have found works for you?

M23


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
mLipok

Try debuger instead debugger


Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest begining - comunication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library
 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection *

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2018-10-15

Share this post


Link to post
Share on other sites
Melba23

akira2891,

I was just about to suggest the SciTE Debug function. You might also find these threads of interest (they appeared when I searched):

Personally I manage fine with a few ConsoleWrite & MsgBox lines.

M23

 

 


Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______My UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
akira2891

Ok, but problem was with my script that when u press F5 code runs without error but gui was not show up, and when i copiled it, it says me error on line 1594 and i have only 400 lines of code :D, but nevermind i fixed it, i loaded some functions before gui and i need to put them after gui show up :)

_function1()
_function2()

; gui start

#gui code here

;=> gui end


; replaced by

; gui start

#gui code here

;=> gui end

_function1()
_function2()

Thats why i think there is some debuger when u run a code to show u where is error exactly but console, msgbox and this build in function works just fine :)

 

And here is one if anyone needs http://www.heise.de/download/autoit-debugger-1162782.html

Edited by akira2891

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • ufukreis1212
      By ufukreis1212
      Hello, I am new members. Help me please. I want vbs convert to au3 .
      This vbs code : 
      'deneme Set SystemSet = GetObject("winmgmts:").InstancesOf ("Win32_OperatingSystem") strOSArch = GetObject("winmgmts:root\cimv2:Win32_OperatingSystem=@").OSArchitecture Set objNetwork = CreateObject("Wscript.Network") Set wshShell = CreateObject( "WScript.Shell" ) strComputerName = wshShell.ExpandEnvironmentStrings( "%COMPUTERNAME%" ) Set oShell = WScript.CreateObject("WScript.Shell") proc_arch = oShell.ExpandEnvironmentStrings("%PROCESSOR_ARCHITECTURE%") Set oEnv = oShell.Environment("SYSTEM") strComputer = "." Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2") Set colMB = objWMIService.ExecQuery("Select * from Win32_BaseBoard") Set colCSes = objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystem") Set colProcessors = objWMIService.ExecQuery("Select * from Win32_Processor") Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2") Set colItemsx = objWMIService.ExecQuery( _ "SELECT * FROM Win32_VideoController",,48) '------------------------------------------------------------------- Set obj = GetObject("winmgmts:").InstancesOf("Win32_PhysicalMemory") i = 1 For Each obj2 In obj memTmp1 = obj2.capacity / 1024 / 1024 TotalRam = TotalRam + memTmp1 i = i +1 Next '-------------------------------------------------------------------- Dim objWMIService : Set objWMIService = GetObject("winmgmts:\\.\root\cimv2") Set colItems = objWMIService.ExecQuery("Select Architecture from Win32_Processor") For Each objItem in colItems if objItem.Architecture = 0 then strArchitecture = "x86" end if if objItem.Architecture = 9 then strArchitecture = "x64" end if next '-------------------------------------------------------------------- strComputer = "." ' Local computer strMemory = "" i = 1 set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2") set colItems = objWMIService.ExecQuery("Select * from Win32_PhysicalMemory") For Each objItem In colItems if strMemory <> "" then strMemory = strMemory & vbcrlf strMemory = strMemory & "Bank" & i & " : " & (objItem.Capacity /1024 /1024) & " Mb" i = i + 1 Next installedModules = i - 1 Set colItems = objWMIService.ExecQuery("Select * from Win32_PhysicalMemoryArray") For Each objItem in colItems totalSlots = objItem.MemoryDevices Next '---------------------------------------------------------------------- Set objWMISvc = GetObject( "winmgmts:\\.\root\cimv2" ) Set colItems = objWMISvc.ExecQuery( "Select * from Win32_ComputerSystem" ) For Each objItem in colItems strComputerDomain = objItem.Domain Next for each System in SystemSet For Each objItem in colItemsx For Each objProcessor in colProcessors For Each bbType In colMB MbVendor = bbType.Manufacturer MbModel = bbType.Product MsgBox "İşletim Sistemi : " & System.Caption & vbNewLine & _ "İşletim Sistemi Versionu : " & + System.Version & vbNewLine & _ "Windows Mimari Yapısı: " & strOSArch & vbNewLine & _ "Kullanıcı isminiz: " & objNetwork.UserName & vbNewLine & _ "Bilgisayar ismi: " & strComputerName & vbNewLine & _ "Çalışma Grubu: " & strComputerDomain & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "Anakart: " & MbVendor & " " & "[" & MbModel & "]" & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "Grafik Kartı: " & objItem.Caption & vbNewLine & _ "Driver Version: " & objItem.DriverVersion & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "İşlemci Üreticisi: " & objProcessor.Manufacturer & vbNewLine & _ "İşlemci İsmi: " & objProcessor.Name & vbNewLine & _ "CPU Mimarisi: " & strArchitecture & vbNewLine & _ "İşlemci Çekirdek sayısı: " & oEnv("NUMBER_OF_PROCESSORS") & vbNewLine & _ "--------------------------------------" & vbNewLine & _ "Toplam RAM: " & TotalRam & " MB" & vbNewLine & _ "Toplam Slot: " & totalSlots & vbNewLine & _ "Boş Slot: " & (totalSlots - installedModules) & vbNewLine & _ "Ramlerin bulunduğu slotlar:" & vbcrlf & strMemory,0,"deneme" Next Next Next Next please help me , thanks.
    • JuanFelipe
      By JuanFelipe
       
      Hello friends, I have a query, it happens that I have a matrix nxn, the first column of this contains each cell a number with 21 digits, when I pass this matrix to Excel I obviously write that number as 1,10016E + 20, I solved it by adding a * at the end of each cell, but I want it to be written as a text so that I do not have to remove that *, I searched in Google but could not find an effective solution, thanks in advance. 
    • Puls3
      By Puls3
      Hi, This is my first post on the AutoIt Forums, I most of the time was able to get help from this community by merely searching though google and have been able to solve hundreds of problems this way, though in this case I was incapable of finding a solution to my problem. I am quite confident that it is a user error (And my fault) but I haven't been able to determine what I did wrong, any and all help would be greatly appreciated! I have uploaded my whole script pardon passwords to provide as much information as possible.
      I declared a global array at the top of the script and am having issues when I try to set it's value, and I fail to understand why.
      Error Message:
      "D:\Projects\AutoIt\Arena\Base.au3" (270) : ==> Subscript used on non-accessible variable.:
      $ExpMax[$i] = IniRead($TempSavePath, "Combatant" & $i, "ExpMax", $ExpMax[0])
      $ExpMax^ ERROR
      ConsoleWrite Log:
      Ran.
      Checking launch parameters.
      No launch parameters.
      Initiating load.
      Checking for save file.
      Save file not found.
      Load canceled.
      Loading or creating Combatant 1
      Base.au3
    • RamDemon
      By RamDemon
      Hi,
      Did anyone tried to  use Redis  with AutoIT as store DB ?
       Redis <-- more about it
      Mladen
    • nooneclose
      By nooneclose
      Hey. I'm working on a new project and was wondering if there is a better way to "update" my Column E array. 
      Here is my code: 
      Local $nI  = 0                                                            ;Creates a name index of 0: nI = Name index Local $nII = 1                                                            ;Creates a name index of 1 for second loop: nII = Name Index 2 For    $iN = 0 To $IndexRows Step 1                                       ;Checks the roster for any names that appear twice      For $iN2 = 0 To $IndexRows Step 1          if $d_Names[$nI] == $d_Names[$nII] And $d_Names[$nII] <> "" Then              Local $timeSheetName = _ArraySearch($e_Names, $d_Names[$nI], 0, 0, 0, 0, 1)              ;MsgBox($MB_SYSTEMMODAL, "Found it", $d_Names[$nI] & " In column E on Row " & $timeSheetName)              Local $eI  = $timeSheetName + 1              ;ConsoleWrite($timeSheetName & @CRLF)              ;ConsoleWrite($eI & @CRLF)              ;ConsoleWrite(@CRLF)              _Excel_RangeInsert($OpenWorkbook.ActiveSheet, "E" & $eI & ":F" & $eI, $xlShiftDown)                                                                          ;Inserts a empty cell in columns E and F.              _Excel_RangeWrite($OpenWorkbook, $OpenWorkbook.ActiveSheet, $d_Names[$nII], "E" & $eI)                                                                         ;Fills the empty cell in columns E with the doubled name              $aArray_Index = 2                                           ;Array element counter              For $Index = 2 To $IndexRows Step 1                        ;Loops through every row in the Excel file unto no rows are found or a null row is found                  $Array_Value_E = _Excel_RangeRead($OpenWorkbook, Default, "E"&$Index)                  $e_names[$aArray_Index] = $Array_Value_E                ;While the code loops every value in column E is stored in the E array (updating the array)                  $aArray_Index += 1              Next              ExitLoop          EndIf      Next      $nI  += 1      $nII += 1 Next Basically, It checks a roster for people whose name appears twice then inserts a new "row" for that person because they work in two different departments.
      I have to find that name however in Column E if two appear in column D. My code works but I think it is not as efficient as it could be. 
      Any ideas on how to improve the "update" for my array?
      (once it finds the double names in Column D it then searches for that name by going name by name in the Column E array and once it finds it inserts a new row. However, the E array doesn't have that new row stored in it so I have to "update" the array to properly find the next name)
      Any and all tips would be greatly appreciated. 
       
      NOTE: Just assume I'm opening the excel file properly please do not add that code in, it only complicates your answer. 
×