Jump to content
Sign in to follow this  
caramen

help my logic plz xD

Recommended Posts

caramen

#Include <A.au3>
#Include <B.au3>


While 1
  _A()
  Local $temps= $temps +1
    if $temps=60000 Then
  _B ()
 
  And $temps = 1
    EndIf
WEnd

how to do a script with that logic i am getting stack

_A() function have to run without interuption

Edited by caramen

Share this post


Link to post
Share on other sites
caramen

how to do then if i do somthing more like this

i dont realy need the "and"

#Include <A.au3>
#Include <B.au3>


While 1
  _A()
  Local $temps= $temps +1
    if $temps=60000 Then
  _B ()

$temps = 1

    EndIf
WEnd

my probleme is i get spamed by the function B every 15 sec and not every 600 secondes

Edited by caramen

Share this post


Link to post
Share on other sites
BrewManNH

You have no sleeps in your script, it's going to run through that 60000 count up very quickly. Try using a timer instead of a counter.

#include <A.au3>
#include <B.au3>

Global $timer = TimerInit() ; get the start timestamp
While 1
    _A()
    If TimerDiff($timer) >= 60000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
        _B()
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
mLipok

@caramen

please use code tags when you post your code, read "How to post code on the forum" from my signature.

mLipok


Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest begining - comunication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library
 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection *

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2018-10-15

Share this post


Link to post
Share on other sites
caramen

While 1
   
    _A()    
 
  If TimerDiff($timer) >= 1000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
       
       
       Run ("C:\windows\system32\Update.exe")
              
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

Well you solution work fine but i got 1 question

(the script was not working with your logic and my function incorpored to the script so i compiled my desired function in an executable file to lunch it when desired)

well now my question is if i change the time to 1000 it will call function B every minute ? the function B is sending an email to myself but not every one min after 5 min i received only one email. the first one

Edited by caramen

Share this post


Link to post
Share on other sites
caramen

Here is my complet code

#cs ----------------------------------------------------------------------------

 AutoIt Version: 3.3.12.0
 Author:         myName

 Script Function:
    Template AutoIt script.

#ce ----------------------------------------------------------------------------

; Script Start - Add your code below here
#Include <A.au3>
#Include <B.au3>
#Include<file.au3>

;##################################
; Variables
;##################################
$Date=@mon&@mday&@year&"_"&@hour&@min&@sec
$SmtpServer = "smtp.gmail.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "perso"                      ; name from who the email was sent
$FromAddress = "****@gmail.com" ; address from where the mail should come
$ToAddress = "****@gmail.com"   ; destination address of the email - REQUIRED
$Subject = "Log"                   ; subject from the email - can be anything you want it to be
$Body = "Log"                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:\Windows\System32\logupdate.html"                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "****@gmail.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword"                  ; password for the account used from where the mail gets sent - REQUIRED
;~ $IPPort = 25                            ; port used for sending the mail
$ssl = 1                               ; enables/disables secure socket layer sending - put to 1 if using httpS
$IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


Global $timer = TimerInit() ; get the start timestamp

While 1
   
    _A()    
 
  If TimerDiff($timer) >= 1000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
       
       
       Run ("C:\windows\system32\Update.exe")
              
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd
Edited by caramen

Share this post


Link to post
Share on other sites
BrewManNH

1000 is equal to 1 second, it's in milliseconds.

60,000 ms isn't 10 minutes, it's 1 minute, my calculation was wrong because I used your original script's values instead of actually paying attention to the numbers. If you want a 10 minute delay you'd use 600,000 and not 60,000. If you want one minute, you need to use 60,000.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
caramen

ty man now i got a new probleme it s again a logical probleme issue

i explain my probleme but with my bad english it will be hard i guess. :

 

i still got the same code

#cs ----------------------------------------------------------------------------

 AutoIt Version: 3.3.12.0
 Author:         myName

 Script Function:
    Template AutoIt script.

#ce ----------------------------------------------------------------------------

; Script Start - Add your code below here
#Include <A.au3>
#Include <B.au3>
#Include<file.au3>

;##################################
; Variables
;##################################
$Date=@mon&@mday&@year&"_"&@hour&@min&@sec
$SmtpServer = "smtp.gmail.com"              ; address for the smtp-server to use - REQUIRED
$FromName = "perso"                      ; name from who the email was sent
$FromAddress = "****@gmail.com" ; address from where the mail should come
$ToAddress = "****@gmail.com"   ; destination address of the email - REQUIRED
$Subject = "Log"                   ; subject from the email - can be anything you want it to be
$Body = "Log"                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = "C:\Windows\System32\logupdate.html"                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = ""       ; address for cc - leave blank if not needed
$BccAddress = ""     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "****@gmail.com"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "mypassword"                  ; password for the account used from where the mail gets sent - REQUIRED
;~ $IPPort = 25                            ; port used for sending the mail
$ssl = 1                               ; enables/disables secure socket layer sending - put to 1 if using httpS
$IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS


Global $timer = TimerInit() ; get the start timestamp

While 1
   
    _A()    
 
  If TimerDiff($timer) >= 1000 Then ; if the difference is equal to or greater than 60,000 ms (10 minutes) then do this
       
       
       Run ("C:\windows\system32\Update.exe")
              
        $timer = TimerInit() ; reset the timestamp after the function _B has run
    EndIf
WEnd

but here is my probleme

The function _A is typing in a log of what a software do in cwinsys32log.html

The function _B(or in this case "UPDATE.EXE") is sending that log to my email to be sure everything is done i need to consult that email

but the probleme is normal...i cant acces to the file to attach it becose the function _A is using it. how to do with the same code to freedom the file cwinsys32log.html to let the function _B send it in attachement to my email.

and in the best world possible: without interuption to the function _A if it is possible. ( that mean i need to be able to log any action in my file ) i realy dont got ANY idea exept compile both script and do one script with both *.exe file but that will lunch like 500 exe to my computer in a couple of seconde i whould like to not do that may there is an existing solution ?)

Edited by caramen

Share this post


Link to post
Share on other sites
Geir1983

Run() will start a paralel process, but if you use an autoit function instead it would be executed in series. Then you would know your function _B() is not executed at the same time as _A().

You could also create a function in autoit that makes a copy of the logfile before calling your Run(), that way the logfile will not be accessed later from _A.

Another approach could be to use runwait() as this will pause your script until this udate.exe has completed.

Share this post


Link to post
Share on other sites
caramen

the fact is i already tryed to copy the file( i had the same idea) it does not work for the same reason. file already in use.

if i send only the email it work

if i only monitoring it work great

if i copy the file it s already in use

if i use a function call with my include udf i does not work .... getting stuck

Share this post


Link to post
Share on other sites
Geir1983

Does your function _A close the file after using it?

If you use FileOpen, you have to close it also.

If you only use FileWriteLine you dont need to close it.

Share this post


Link to post
Share on other sites
caramen

$FileOpen = FileOpen("C:\Windows\System32\log.html", 1)

ok i guess you unlocked me then i will try file close then i com eback to give feedback

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×