mLipok Posted 6 hours ago Posted 6 hours ago (edited) Recently I was playing with listview and groups. I have new findings. Please take a look on this example: expandcollapse popup#AutoIt3Wrapper_UseX64=n ; From Nine #include <WindowsConstants.au3> #include <ColorConstants.au3> #include <GUIConstants.au3> #include <GuiListView.au3> #include <WinAPI.au3> #include <WinAPIDiag.au3> #include <WinAPITheme.au3> Opt("MustDeclareVars", True) Global $hHeader Example() Func Example() GUICreate("Example") Local $idListview = GUICtrlCreateListView("", 10, 10, 350, 200, -1, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_DOUBLEBUFFER)) $hHeader = GUICtrlSendMsg($idListview, $LVM_GETHEADER, 0, 0) _WinAPI_SetWindowTheme($hHeader, "", "") ;Turn off theme for header Local $iStyle = _WinAPI_GetWindowLong($hHeader, $GWL_STYLE) _WinAPI_SetWindowLong($hHeader, $GWL_STYLE, BitOR($iStyle, $HDS_FLAT)) ; remove header 3D button effect Local $idButton = GUICtrlCreateButton("Enable/Disable GroupView", 10, 220, 200, 20) GUISetState(@SW_SHOW) GUIRegisterMsg($WM_NOTIFY, WM_NOTIFY) _GUICtrlListView_AddColumn($idListview, "Column 1", 100) _GUICtrlListView_AddColumn($idListview, "Column 2", 100) _GUICtrlListView_AddColumn($idListview, "Column 3", 142) _GUICtrlListView_AddItem($idListview, "Row 1: Col 1", 0) _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 2", 1, 1) _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 3 - speciall long info", 2, 2) _GUICtrlListView_AddItem($idListview, "Row 2: Col 1", 1) _GUICtrlListView_AddSubItem($idListview, 1, "Row 2: Col 2", 1, 2) _GUICtrlListView_AddItem($idListview, "Row 3: Col 1", 2) _GUICtrlListView_InsertGroup($idListview, -1, 1, "Group 1") _GUICtrlListView_InsertGroup($idListview, -1, 2, "Group 2") _GUICtrlListView_SetItemGroupID($idListview, 0, 1) _GUICtrlListView_SetItemGroupID($idListview, 1, 2) _GUICtrlListView_SetItemGroupID($idListview, 2, 2) _GUICtrlListView_SetColumnWidth($idListview, 0, 80) _GUICtrlListView_SetColumnWidth($idListview, 1, 150) _GUICtrlListView_SetColumnWidth($idListview, 2, $LVSCW_AUTOSIZE_USEHEADER) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "Before InsertItem") _GUICtrlListView_InsertItem($idListview, "NEW ITEM 1", 2) ; insert as 2 ID .... before "Row 3: Col 1" _GUICtrlListView_SetItemGroupID($idListview, 2, 2) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "After InsertItem NEW ITEM 1 .. before EnableGroupView") _GUICtrlListView_InsertItem($idListview, "NEW ITEM 2", 3) ; insert as 2 ID .... before "Row 3: Col 1" _GUICtrlListView_SetItemGroupID($idListview, 3, 2) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "After InsertItem NEW ITEM 2 .. before EnableGroupView" & @CRLF & @CRLF & "Take a note that NEW ITEM 1 and 2 are before ROW 3: Col 1") _GUICtrlListView_EnableGroupView($idListview, True) ;~ _GUICtrlListView_RedrawItems($idListview, 1, 4) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "After EnableGroupView" & @CRLF & @CRLF & "Take a note that NEW ITEM 1 and 2 are after ROW 3: Col 1") MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "before removing setting for each Item from Group 2") _GUICtrlListView_SetItemGroupID($idListview, 1, -2) _GUICtrlListView_SetItemGroupID($idListview, 2, -2) _GUICtrlListView_SetItemGroupID($idListview, 3, -2) _GUICtrlListView_SetItemGroupID($idListview, 4, -2) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "before setting again each desired ListViewItems to Group 2") _GUICtrlListView_SetItemGroupID($idListview, 1, 2) _GUICtrlListView_SetItemGroupID($idListview, 2, 2) _GUICtrlListView_SetItemGroupID($idListview, 3, 2) _GUICtrlListView_SetItemGroupID($idListview, 4, 2) While True Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $idButton _GUICtrlListView_EnableGroupView($idListview, Not _GUICtrlListView_GetGroupViewEnabled($idListview)) ConsoleWrite('"Enable/Disable GroupView" button clicked' & @CRLF) EndSwitch WEnd EndFunc ;==>Example Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam Local $tItem = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) If $tItem.Code <> $NM_CUSTOMDRAW Then Return $GUI_RUNDEFMSG Local Static $clrHighlight = _WinAPI_GetSysColor($COLOR_HIGHLIGHT) Local Static $clrBack = _WinAPI_SwitchColor($COLOR_LIGHTBLUE) Local Static $clrText = _WinAPI_SwitchColor($COLOR_BLUE) Local Static $hPenGroup_GuideLine = _WinAPI_CreatePen($PS_DASH, 1, $clrBack) Local Static $hPenItem_Borders = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_SwitchColor($COLOR_RED)) Local Static $hPenHeader_Borders = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_SwitchColor($COLOR_RED)) Local Static $hBrushGroup = _WinAPI_CreateSolidBrush($COLOR_BLACK) Local Static $hBrushItem_Selected = _WinAPI_CreateSolidBrush($clrHighlight) Local Static $hBrushItem_Unselected = _WinAPI_CreateSolidBrush(0xFFFFFF) Local Static $hBrushHeader = _WinAPI_CreateSolidBrush(0xFFCCDD) ;~ Local Static $tRect = DllStructCreate($tagRECT, DllStructGetPtr($tItem, "left")) Local $tRect = DllStructCreate($tagRECT, DllStructGetPtr($tItem, "left")) Local $hDC = $tItem.hDC If $tItem.hWndFrom = $hHeader Then If $tItem.dwDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If Not $tItem.dwItemSpec Then $tRect.left += 5 $tRect.bottom -= 1 _WinAPI_SelectObject($tItem.hDC, $hPenHeader_Borders) _WinAPI_SelectObject($tItem.hDC, $hBrushHeader) _WinAPI_Rectangle($tItem.hDC, $tRect) $tRect.Left += 5 $tRect.Top += 3 _WinAPI_SetTextColor($tItem.hDC, 0) _WinAPI_SetBkMode($tItem.hDC, $TRANSPARENT) _WinAPI_DrawText($tItem.hDC, _GUICtrlHeader_GetItemText($tItem.hWndFrom, $tItem.dwItemSpec), $tRect, $DT_LEFT) Return $CDRF_SKIPDEFAULT ElseIf _WinAPI_GetClassName($tItem.hWndFrom) = "SysListView32" And $tItem.Code = $NM_CUSTOMDRAW And $tItem.dwItemSpec >= 0 Then If $tItem.dwItemType = $LVCDI_GROUP Then If $tItem.dwDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If $tItem.dwDrawStage = $CDDS_ITEMPREPAINT Then Return $CDRF_NOTIFYSUBITEMDRAW $tRect.bottom = $tRect.top + 15 _WinAPI_FillRect($hDC, $tRect, $hBrushGroup) _WinAPI_SelectObject($hDC, $hPenGroup_GuideLine) _WinAPI_DrawLine($hDC, $tRect.left + 5, $tRect.top + 8, $tRect.right - 5, $tRect.top + 8) _WinAPI_SetBkColor($hDC, $clrBack) _WinAPI_SetBkMode($hDC, $OPAQUE) _WinAPI_SetTextColor($hDC, $clrText) $tRect.left += 20 _WinAPI_DrawText($hDC, " " & _GUICtrlListView_GetGroupInfo($tItem.hWndFrom, $tItem.dwItemSpec)[0] & " ", $tRect, BitOR($DT_LEFT, $DT_WORDBREAK, $DT_WORD_ELLIPSIS)) Return $CDRF_SKIPDEFAULT Else If $tItem.dwDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If $tItem.dwDrawStage = $CDDS_ITEMPREPAINT Then Return $CDRF_NOTIFYSUBITEMDRAW Local $bIsSelected = _GUICtrlListView_GetItemState($tItem.hWndFrom, $tItem.dwItemSpec, $LVIS_SELECTED) If $bIsSelected Then _WinAPI_SelectObject($hDC, $hBrushItem_Selected) Else _WinAPI_SelectObject($hDC, $hBrushItem_Unselected) EndIf _WinAPI_SelectObject($hDC, $hPenItem_Borders) If $tItem.dwItemSpec > 0 Then $tRect.top -= 1 $tRect.bottom += 1 _WinAPI_Rectangle($hDC, $tRect) _WinAPI_SetTextColor($hDC, $bIsSelected ? 0xFFFFFF : $clrHighlight) _WinAPI_SetBkMode($hDC, $TRANSPARENT) $tRect.Left += 5 $tRect.Top += 2 _WinAPI_DrawText($hDC, _GUICtrlListView_GetItemText($tItem.hWndFrom, $tItem.dwItemSpec, $tItem.iSubitem), $tRect, BitOR($DT_LEFT, $DT_INTERNAL, $DT_WORDBREAK)) Return $CDRF_SKIPDEFAULT EndIf EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Did you know that _GUICtrlListView_InsertItem() acts differently for ListView with _GUICtrlListView_EnableGroupView($idListview, True) ? Is it strange for you ? Edited 3 hours ago by mLipok Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24
mLipok Posted 3 hours ago Author Posted 3 hours ago (edited) New example: expandcollapse popup;~ https://www.autoitscript.com/forum/topic/213681-listview-with-groups-inserting-new-rows-issue-with-_guictrllistview_insertitem/ #AutoIt3Wrapper_UseX64=n ; From Nine #include <WindowsConstants.au3> #include <ColorConstants.au3> #include <GUIConstants.au3> #include <GuiListView.au3> #include <WinAPI.au3> #include <WinAPIDiag.au3> #include <WinAPITheme.au3> Opt("MustDeclareVars", True) Global $hHeader Example() Func Example() GUICreate("Example", 480) Local $idListview = GUICtrlCreateListView("", 10, 10, 450, 300, -1, BitOR($LVS_EX_FULLROWSELECT, $LVS_EX_DOUBLEBUFFER)) $hHeader = GUICtrlSendMsg($idListview, $LVM_GETHEADER, 0, 0) _WinAPI_SetWindowTheme($hHeader, "", "") ;Turn off theme for header Local $iStyle = _WinAPI_GetWindowLong($hHeader, $GWL_STYLE) _WinAPI_SetWindowLong($hHeader, $GWL_STYLE, BitOR($iStyle, $HDS_FLAT)) ; remove header 3D button effect Local $idButton = GUICtrlCreateButton("Enable/Disable GroupView", 10, 320, 200, 20) GUISetState(@SW_SHOW) GUIRegisterMsg($WM_NOTIFY, WM_NOTIFY) _GUICtrlListView_AddColumn($idListview, "Column 1", 100) _GUICtrlListView_AddColumn($idListview, "Column 2", 100) _GUICtrlListView_AddColumn($idListview, "Column 3", 142) _GUICtrlListView_AddItem($idListview, "Row 1: Col 1", 0) _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 2", 1, 1) _GUICtrlListView_AddSubItem($idListview, 0, "Row 1: Col 3 - speciall long info", 2, 2) _GUICtrlListView_AddItem($idListview, "Row 2: Col 1", 0) _GUICtrlListView_AddSubItem($idListview, 1, "Row 2: Col 2", 1, 2) _GUICtrlListView_AddItem($idListview, "Row 3: Col 1", 0) _GUICtrlListView_AddItem($idListview, "Row 4: Col 1", 0) _GUICtrlListView_InsertGroup($idListview, -1, 101, "Group 1") _GUICtrlListView_InsertGroup($idListview, -1, 202, "Group 2") _GUICtrlListView_InsertGroup($idListview, -1, 303, "Group 3") _GUICtrlListView_SetItemGroupID($idListview, 0, 101) _GUICtrlListView_SetItemGroupID($idListview, 1, 202) _GUICtrlListView_SetItemGroupID($idListview, 2, 202) _GUICtrlListView_SetItemGroupID($idListview, 3, 303) _GUICtrlListView_SetColumnWidth($idListview, 0, 80) _GUICtrlListView_SetColumnWidth($idListview, 1, 150) _GUICtrlListView_SetColumnWidth($idListview, 2, $LVSCW_AUTOSIZE_USEHEADER) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "Before InsertItem") _GUICtrlListView_InsertItem($idListview, "NEW ITEM 1", 2) ; insert as 2 ID .... before "Row 3: Col 1" _GUICtrlListView_SetItemGroupID($idListview, 2, 202) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "After InsertItem NEW ITEM 1 .. before EnableGroupView") _GUICtrlListView_InsertItem($idListview, "NEW ITEM 2", 3) ; insert as 2 ID .... before "Row 3: Col 1" _GUICtrlListView_SetItemGroupID($idListview, 3, 202) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "After InsertItem NEW ITEM 2 .. before EnableGroupView" & @CRLF & @CRLF & "Take a note that NEW ITEM 1 and 2 are before ROW 3: Col 1") _GUICtrlListView_EnableGroupView($idListview, True) ;~ _GUICtrlListView_RedrawItems($idListview, 1, 4) MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "After EnableGroupView" & @CRLF & @CRLF & "Take a note that NEW ITEM 1 and 2 are after ROW 3: Col 1" & @CRLF & "but they were put before ROW 3: Col 1") MsgBox($MB_TOPMOST, "TEST #" & @ScriptLineNumber, "before RE-setting for each Item from Group 2") For $IDX = 0 To _GUICtrlListView_GetItemCount($idListview) -1 If _GUICtrlListView_GetItemGroupID($idListview, $IDX) = 202 Then _GUICtrlListView_SetItemGroupID($idListview, $IDX, -2) _GUICtrlListView_SetItemGroupID($idListview, $IDX, 202) EndIf Next While True Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $idButton _GUICtrlListView_EnableGroupView($idListview, Not _GUICtrlListView_GetGroupViewEnabled($idListview)) ConsoleWrite('"Enable/Disable GroupView" button clicked' & @CRLF) EndSwitch WEnd EndFunc ;==>Example Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam Local $tItem = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) If $tItem.Code <> $NM_CUSTOMDRAW Then Return $GUI_RUNDEFMSG Local Static $clrHighlight = _WinAPI_GetSysColor($COLOR_HIGHLIGHT) Local Static $clrBack = _WinAPI_SwitchColor($COLOR_LIGHTBLUE) Local Static $clrText = _WinAPI_SwitchColor($COLOR_BLUE) Local Static $hPenGroup_GuideLine = _WinAPI_CreatePen($PS_DASH, 1, $clrBack) Local Static $hPenItem_Borders = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_SwitchColor($COLOR_RED)) Local Static $hPenHeader_Borders = _WinAPI_CreatePen($PS_SOLID, 1, _WinAPI_SwitchColor($COLOR_RED)) Local Static $hBrushGroup = _WinAPI_CreateSolidBrush($COLOR_BLACK) Local Static $hBrushItem_Selected = _WinAPI_CreateSolidBrush($clrHighlight) Local Static $hBrushItem_Unselected = _WinAPI_CreateSolidBrush(0xFFFFFF) Local Static $hBrushHeader = _WinAPI_CreateSolidBrush(0xFFCCDD) ;~ Local Static $tRect = DllStructCreate($tagRECT, DllStructGetPtr($tItem, "left")) Local $tRect = DllStructCreate($tagRECT, DllStructGetPtr($tItem, "left")) Local $hDC = $tItem.hDC If $tItem.hWndFrom = $hHeader Then If $tItem.dwDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If Not $tItem.dwItemSpec Then $tRect.left += 5 $tRect.bottom -= 1 _WinAPI_SelectObject($tItem.hDC, $hPenHeader_Borders) _WinAPI_SelectObject($tItem.hDC, $hBrushHeader) _WinAPI_Rectangle($tItem.hDC, $tRect) $tRect.Left += 5 $tRect.Top += 3 _WinAPI_SetTextColor($tItem.hDC, 0) _WinAPI_SetBkMode($tItem.hDC, $TRANSPARENT) _WinAPI_DrawText($tItem.hDC, _GUICtrlHeader_GetItemText($tItem.hWndFrom, $tItem.dwItemSpec), $tRect, $DT_LEFT) Return $CDRF_SKIPDEFAULT ElseIf _WinAPI_GetClassName($tItem.hWndFrom) = "SysListView32" And $tItem.Code = $NM_CUSTOMDRAW And $tItem.dwItemSpec >= 0 Then If $tItem.dwItemType = $LVCDI_GROUP Then If $tItem.dwDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If $tItem.dwDrawStage = $CDDS_ITEMPREPAINT Then Return $CDRF_NOTIFYSUBITEMDRAW $tRect.bottom = $tRect.top + 15 _WinAPI_FillRect($hDC, $tRect, $hBrushGroup) _WinAPI_SelectObject($hDC, $hPenGroup_GuideLine) _WinAPI_DrawLine($hDC, $tRect.left + 5, $tRect.top + 8, $tRect.right - 5, $tRect.top + 8) _WinAPI_SetBkColor($hDC, $clrBack) _WinAPI_SetBkMode($hDC, $OPAQUE) _WinAPI_SetTextColor($hDC, $clrText) $tRect.left += 20 _WinAPI_DrawText($hDC, " " & _GUICtrlListView_GetGroupInfo($tItem.hWndFrom, $tItem.dwItemSpec)[0] & " ", $tRect, BitOR($DT_LEFT, $DT_WORDBREAK, $DT_WORD_ELLIPSIS)) Return $CDRF_SKIPDEFAULT Else If $tItem.dwDrawStage = $CDDS_PREPAINT Then Return $CDRF_NOTIFYITEMDRAW If $tItem.dwDrawStage = $CDDS_ITEMPREPAINT Then Return $CDRF_NOTIFYSUBITEMDRAW Local $bIsSelected = _GUICtrlListView_GetItemState($tItem.hWndFrom, $tItem.dwItemSpec, $LVIS_SELECTED) If $bIsSelected Then _WinAPI_SelectObject($hDC, $hBrushItem_Selected) Else _WinAPI_SelectObject($hDC, $hBrushItem_Unselected) EndIf _WinAPI_SelectObject($hDC, $hPenItem_Borders) If $tItem.dwItemSpec > 0 Then $tRect.top -= 1 $tRect.bottom += 1 _WinAPI_Rectangle($hDC, $tRect) _WinAPI_SetTextColor($hDC, $bIsSelected ? 0xFFFFFF : $clrHighlight) _WinAPI_SetBkMode($hDC, $TRANSPARENT) $tRect.Left += 5 $tRect.Top += 2 _WinAPI_DrawText($hDC, _GUICtrlListView_GetItemText($tItem.hWndFrom, $tItem.dwItemSpec, $tItem.iSubitem), $tRect, BitOR($DT_LEFT, $DT_INTERNAL, $DT_WORDBREAK)) Return $CDRF_SKIPDEFAULT EndIf EndIf Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY Edited 3 hours ago by mLipok Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24
mLipok Posted 3 hours ago Author Posted 3 hours ago (edited) Conclusion: After adding new items to a Grouped ListView, To maintain the correct order of items within a group, it is often necessary to regroup the items within the group by removing the item's group assignment and then reassigning it to the group. EDIT: Please let me know if I am wrong about any technical details or linguistic aspects of the conclusion. I used Google Translate because I am not a native English speaker. Edited 3 hours ago by mLipok Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now