Jump to content
Jos

25-7-2015:New SciTE4AutoIt3 available with the updated SciTE v3.5.4 release.

Recommended Posts

Melba23

Jos,

Thanks as ever.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______Open Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
guinness

Thanks. Nothing broken yet.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites
Iczer

maybe it only me, but highlight.current.word.stoponspace=0 not working for me in this release. i change it in

C:\Program Files (x86)\AutoIt3\SciTE\SciTEGlobal.properties

can someone test it?

Share this post


Link to post
Share on other sites
Jos

You're not the only one.... sorry about that. My build script prompts me for updating with the latest version but failed this time as the SciTE version didn't change.
The correct version is available in the Beta directory again and have re-uploaded the NSIS installer with the proper version of SciTE in there.

By the way: You really should make these changes in SciTEUser.properties to ensure they are not overridden with the next upgrade.

Thanks for the report.

Jos

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
Danyfirex

@Jos where SciTE abbreviations Store the Data? I want to save that files to import to another computer late. (sorry If this should not be answered here)

 

Saludos

Share this post


Link to post
Share on other sites
Jos

Those files are located at : %LOCALAPPDATA%\AutoIt v3\SciTE

au3abbrev.properties - standard supplied AutoIt3 stuff
au3UserAbbrev.properties - your own user stuff

Jos

  • Like 1

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
mLipok

What about: au3.keywords.user.abbreviations.properties
?

  • Like 1

Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest begining - comunication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library
 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF *

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2018-10-31

Share this post


Link to post
Share on other sites
Danyfirex

You're right mLipok two are needed. Thank you Both.

Saludos

Share this post


Link to post
Share on other sites
BBs19

Both Firefox and Chrome are blocking the download of Scite4Autoit3 from autoitscript.com (Malware/Phising-Warning). Downloading anything else works fine.

Any idea why?

 

Edit it seems like everything under the link https://www.autoitscript.com/site/autoit-script-editor/ is beeing blocked from downloading.

Edited by BBs19

Share this post


Link to post
Share on other sites
Melba23

BBs19,

Did you try searching the forum?

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______Open Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
Melba23

Jon,

Ah yes, you increased the necessary post count during the forum upgrade - I got some complaints about that.

BBs19,

Sorry - we know about it and are trying to get it changed.

M23


Public_Domain.png.2d871819fcb9957cf44f4514551a2935.png Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind._______Open Open spoiler to see my UDFs:

Spoiler

ArrayMultiColSort ---- Sort arrays on multiple columns
ChooseFileFolder ---- Single and multiple selections from specified path treeview listing
Date_Time_Convert -- Easily convert date/time formats, including the language used
ExtMsgBox --------- A highly customisable replacement for MsgBox
GUIExtender -------- Extend and retract multiple sections within a GUI
GUIFrame ---------- Subdivide GUIs into many adjustable frames
GUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView items
GUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeView
Marquee ----------- Scrolling tickertape GUIs
NoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxes
Notify ------------- Small notifications on the edge of the display
Scrollbars ----------Automatically sized scrollbars with a single command
StringSize ---------- Automatically size controls to fit text
Toast -------------- Small GUIs which pop out of the notification area

 

Share this post


Link to post
Share on other sites
dangelx

[Español]

Hola,

Te comento el problema que he tenido con la instalacion de SciTE4AutoIt3.

Anteriormente tenía instalado en mi equipo el SciTE, pero el original sin las adaptaciones para AutoIt.

Antes de instalar SciTE4AutoIt3, he desinstalado la versión anterior y luego he procedido a instalar esta versión.

Mis quebraderos de cabeza empezaron cuando, despues de instalar, he arrancado la aplicación y SciTE no aplicaba ninguna de las preferencias gobales, ni de usuario, ni de nada. Despues de muchas pruebas, desinstalaciones e instalaciones, cuando ya pensaba darme por vencido, leyendo el codigo del script SciTEConfig me he dado cuenta que hay dos variables de entorno para la aplicación. :sweating:

Dichas variables de entorno seguian manteniendo la ruta de la instalación original de SciTe y no se habían actualizado a su actual ruta de instalación. Solo necesité cambiarlas y voila! todo funcionaba correctamente!

Y todo este rollo que he soltado es para solicitar que el instalador actualice dichas variables, porque aunque parece una tontería (que lo es), puede tenerte loco durante dos dias (como a este pobre tonto).:P

Gracias y perdona los errores, el ingles no es mi idoma materno.
Bye

 

[English]

Hello,

I mention the problem I've had with the installation of SciTE4AutoIt3.

Previously I had installed on my computer the SciTE, but the original without the adaptations for AutoIt.

Before installing SciTE4AutoIt3, I uninstalled the previous version and then I proceeded to install this version.

My headaches began when, after installing, I started SciTE application and did not apply any of the gobales preferences, or user, or anything. After many tests, uninstalls and facilities, when I thought to give up, reading the script code SciTEConfig I've noticed that there are two environment variables to the application.
:sweating:

These environment variables continued to maintain the path of the original installation of Scite and had not been updated to your current installation path. I just needed to change them and voila! everything worked properly!

And all this stuff that I released is to request that the installer update these variables, because although it seems silly (it is), can I have you mad for two days (as this poor fool).
:P

Thanks and forgive mistakes, English is not my native Idoma.
Bye

Share this post


Link to post
Share on other sites
Jos

I have seen your post in your other thread, but you have not answered the question I made there so there is not much I can do.
So Please stop posting in this thread and stick with your original thread. Answer my simple question and I will reply there! ;)

Jos


SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
Jos

Locking this thread and will open a new one soon to announce the re-enabling of the Downloads and changes we have made to avoid False positives in the future.

Stay tuned. :)

Jos

  • Like 1

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource        Forum Rules
 
Live for the present,
Dream of the future,
Learn from the past.
  :)

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • timmy2
      By timmy2
      I've noticed in several YouTube tutorials about AutoIt that every time the instructor types EndFunc a comment "<==(function name)" is automatically added. I understand that Tidy will do this after the fact but what I'm writing about happens in real time. Where's the setting for this?  Thank you.
    • Jos
      By Jos
      I am reaching out to you all to test this version of Tidy to see whether that works on your scripts and report back your finding.
      Changes in this version:
      Leave inline comments on the original position when the line is tidied, where possible. Handle None Breaking Spaces (NBS) for Ascii and UTF8 files: NBS characters within the leading & trailing whitespace and inside the code will be replaced by a regular space to allow tidy to properly tidy the code. NBS characters in a literal string will not be replaced as they are presumably there for a reason. NBS characters inside an inline comment will be left alone too. Added support for directive: #Tidy_ILC_Pos=nn (See below for details) Replaced /Skip_Commentblock & /scb  for /Tidy_Comment block & /tcb and made the default not to tidy comment blocks, as they are frequently used for simple documentation which would making tidying impossible. /tcb=0               =>only indent the whole commentblock  (default) /tcb  or /tcb=1 =>Tidy inside commentblock /tcb=-1              =>leave whole commentbock alone Added support for the following tidy.ini settings: #-->Define the TabSize size
      tabsize=4 #--> Tidy commentblock 1=Tidy, 0=Do not tidy  default=0
      Tidy_commentblock=0
      #-->Define the default column for inline comments, 0=keep current position
      icl_pos=0 Changed the logic for the comment part of #directives. See last example for an explanation Fixed issue in "Variable proper" function, sometimes not updating the variable to the proper caps.  Changed the program to CUI to show console output when ran from CMD prompt. Changed the returncode to -1 when no changes are made. A change in AutoIt3Wrapper will test for this and show as such. Updated support for inline comments:
      One of the items that has been on my wish-/todolist for a long time was to leave inline comments as they were, instead of removing all whitespace between statement and inline comment: For example that this untidied code:
      global $A=1 if $a=1 then ; test $a $a=2 ; Set $a endif ; end test The current production version will change that to:
      Global $A = 1 If $a = 1 Then ; test $a $a = 2 ; Set $a EndIf ; end test The new Beta version will change that to: (leaving the Comment start column the same as it was)
      Global $A = 1 If $A = 1 Then ; test $a $A = 2 ; Set $a EndIf ; end test Tidy.Ini optional change
      Tidy will determine the position of the inline comment by using the tabchar & tabsize parameter from Tidy.ini:
      [ProgramSettings] * * * Indent 0 = Tabs >0 = Number of Space tabchar=0 tabsize=4 #-->Define the default column for inline comments, 0=keep current position icl_pos=0 #--> Tidy commentblock 0=only indent the whole commentblock (default=0) # 1=Tidy inside commentblock # -1=leave whole commentbock alone Tidy_commentblock=0 When not provided in the INI it will be defaulted to Using Tabs with a size of 4.
      When running from within SciTE, a warning is shown in the SciTE console, when they deviate from the SciTE Settings for:
      use.tabs=1
      indent.size=4
      It could help while testing to use Winmerge to see what exactly was changed during the Tidy run by adding this to Tidy.ini:
      ShowDiffPgm = """C:\Program Files (x86)\WinMerge\winmergeu.exe" "%new%" "%old%""" Support for directive #Tidy_ILC_Pos=nn
      Tidy will keep inline comment on their original position, but this can be overridden by the directive: #Tidy_ILC_Pos=nn
      When nn is greater than 0, Tidy will use the defined number as the Inline comment start column going forward.
      When nn= 0 then use the old ILC column. 
      When nn= -1 then strip the spaces between Code and ILC (Old Tidy behavior)
      EG  Original Tidied script:
      Global Enum _ $ADO_ERR_SUCCESS, _ ; No Error $ADO_ERR_GENERAL, _ ; General - some ADO Error - Not classified type of error $ADO_ERR_ENUMCOUNTER ; just for testing Global Const $ADO_EXT_DEFAULT ; default Extended Value Global Const $ADO_EXT_PARAM1 ; Error Occurs in Parameter #1 Global Const $ADO_EXT_PARAM2 ; Error Occurs in Parameter #2 Global Const $ADO_EXT_PARAM3 ; Error Occurs in Parameter #3 Now with new directive added to line up the inline comments:
      #Tidy_ILC_Pos=40 Global Enum _ $ADO_ERR_SUCCESS, _ ; No Error $ADO_ERR_GENERAL, _ ; General - some ADO Error - Not classified type of error $ADO_ERR_ENUMCOUNTER ; just for testing Global Const $ADO_EXT_DEFAULT ; default Extended Value Global Const $ADO_EXT_PARAM1 ; Error Occurs in Parameter #1 Global Const $ADO_EXT_PARAM2 ; Error Occurs in Parameter #2 Global Const $ADO_EXT_PARAM3 ; Error Occurs in Parameter #3 Example  Setting the new column to different values and back to original (0)
      Before Tidy run:
      #Tidy_ILC_Pos=30 Global Enum _ $ADO_ERR_SUCCESS, _ ; No Error $ADO_ERR_GENERAL, _ ; General - some ADO Error - Not classified type of error $ADO_ERR_ENUMCOUNTER ; just for testing #Tidy_ILC_Pos=50 Global Const $ADO_EXT_DEFAULT ; default Extended Value Global Const $ADO_EXT_PARAM1 ; Error Occurs in Parameter #1 Global Const $ADO_EXT_PARAM2 ; Error Occurs in Parameter #2 Global Const $ADO_EXT_PARAM3 ; Error Occurs in Parameter #3 Global Const $ADO_EXT_PARAM4 ; Error Occurs in Parameter #4 #Tidy_ILC_Pos=0 Global Const $ADO_EXT_PARAM5 ; Error Occurs in Parameter #5 Global Const $ADO_EXT_PARAM6 ; Error Occurs in Parameter #6 Global Const $ADO_EXT_INTERNALFUNCTION ; Error Related to internal Function - should not happend - UDF Developer make something wrong ??? Global Const $ADO_EXT_ENUMCOUNTER ; just for testing After Tidy run:
      #Tidy_ILC_Pos=30 Global Enum _ $ADO_ERR_SUCCESS, _ ; No Error $ADO_ERR_GENERAL, _ ; General - some ADO Error - Not classified type of error $ADO_ERR_ENUMCOUNTER ; just for testing #Tidy_ILC_Pos=50 Global Const $ADO_EXT_DEFAULT ; default Extended Value Global Const $ADO_EXT_PARAM1 ; Error Occurs in Parameter #1 Global Const $ADO_EXT_PARAM2 ; Error Occurs in Parameter #2 Global Const $ADO_EXT_PARAM3 ; Error Occurs in Parameter #3 Global Const $ADO_EXT_PARAM4 ; Error Occurs in Parameter #4 #Tidy_ILC_Pos=0 Global Const $ADO_EXT_PARAM5 ; Error Occurs in Parameter #5 Global Const $ADO_EXT_PARAM6 ; Error Occurs in Parameter #6 Global Const $ADO_EXT_INTERNALFUNCTION ; Error Related to internal Function - should not happend - UDF Developer make something wrong ??? Global Const $ADO_EXT_ENUMCOUNTER ; just for testing Example  what happens with the different directives
      Before Tidy run:
      #Tidy_ILC_Pos=40 #UnknowDirective test ; comment ; Know directives/preprocessor Table -> au3.keywords.properties ;~ au3.keywords.special=#endregion #forcedef #forceref #ignorefunc #pragma #region #Region test ;test ; comment there not enough spaces, so simply copy Eveything after #Region to #EndRegion #EndRegion test ; will be replaced #Region test ; comment there are 4 spaces after #region so can line it up with EndRegion #EndRegion test ; will be replaced #forcedef aaaaaa ; comment - linedup at Pos 40 #pragma compile(UPX, False) ; comment - linedup at Pos 40 ;~ au3.keywords.preprocessor=#ce #comments-end #comments-start #cs #include #include-once \ ;~ #notrayicon #onautoitstartregister #requireadmin #NoTrayIcon ; comment - linedup at Pos 40 #RequireAdmin ; comment - linedup at Pos 40 #OnAutoItStartRegister "test" ; comment - linedup at Pos 40 ; -- Special treatment in au3lexer #cs test ; comment Start - copy all after #CS to #CE #ce test ; will be replaced #comments-Start ; comment Start copy all after #CS to #CE #comments-end ; will be replaced ; Knows Direcitves/Special table -> autoit3wrapper.keywords.properties #AutoIt3Wrapper_Add_Constants=n ; comment - linedup at Pos 40 #Au3Stripper_Ignore_Variables ; comment - linedup at Pos 40 #Tidy_Parameters=1 ; comment - linedup at Pos 40 After Tidy run:
      #Tidy_ILC_Pos=40 #UnknowDirective test ; comment ; Know directives/preprocessor Table -> au3.keywords.properties ;~ au3.keywords.special=#endregion #forcedef #forceref #ignorefunc #pragma #region #Region test ;test ; comment there not enough spaces, so simply copy Eveything after #Region to #EndRegion #EndRegion test ;test ; comment there not enough spaces, so simply copy Eveything after #Region to #EndRegion #Region test ; comment there are 4 spaces after #region so can line it up with EndRegion #EndRegion test ; comment there are 4 spaces after #region so can line it up with EndRegion #forcedef aaaaaa ; comment - linedup at Pos 40 #pragma compile(UPX, False) ; comment - linedup at Pos 40 ;~ au3.keywords.preprocessor=#ce #comments-end #comments-start #cs #include #include-once \ ;~ #notrayicon #onautoitstartregister #requireadmin #NoTrayIcon ; comment - linedup at Pos 40 #RequireAdmin ; comment - linedup at Pos 40 #OnAutoItStartRegister "test" ; comment - linedup at Pos 40 ; -- Special treatment in au3lexer #cs test ; comment Start - copy all after #CS to #CE #ce test ; comment Start - copy all after #CS to #CE #comments-start ; comment Start copy all after #CS to #CE #comments-end ; comment Start copy all after #CS to #CE ; Knows Direcitves/Special table -> autoit3wrapper.keywords.properties #AutoIt3Wrapper_Add_Constants=n ; comment - linedup at Pos 40 #Au3Stripper_Ignore_Variables ; comment - linedup at Pos 40 #Tidy_Parameters=1 ; comment - linedup at Pos 40 I like to thank @mLipok for the testing/ideas/questions during the development of this change.
      Jos
    • ademon
      By ademon
      Hi. I can open the editor with out problems but I can not compile because it is placed on another partition diferent from C.
      Can you provide an update of this bug?


    • Myicq
      By Myicq
      This may be a dumb question.. but my vertical screen space is fairly limited. I don't need (always) to see all the debug output from autoIT compiler, wrapper etc.
      Can I turn this part off: (optionally)
      >"D:\AutoIt3\SciTE\..\AutoIt3.exe" "D:\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3" /run /prod /ErrorStdOut /in "D:\temp\xx.au3" +>11:35:44 Starting AutoIt3Wrapper v.15.920.938.0 SciTE v.3.6.0.0 Keyboard:00000406 OS:WIN_7/Service Pack 1 CPU:X64 OS:X86 Environment(Language:0406) +> SciTEDir => D:\AutoIt3\SciTE UserDir => C:\Users\XXX\AppData\Local\AutoIt v3\SciTE\AutoIt3Wrapper SCITE_USERHOME => C:\Users\XXX\AppData\Local\AutoIt v3\SciTE >Running AU3Check (3.3.12.0) from:D:\AutoIt3 input:D:\temp\XX.au3 +>11:35:44 AU3Check ended.rc:0 >Running:(3.3.12.0):D:\AutoIt3\autoit3.exe "D:\temp\xx.au3" --> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop  
    • BugFix
      By BugFix
      This lua script gives you the ability, to search for selected text or word from cursor in an search engine or on an search site of your choice.You can select the engine/site from a list, that you have defined in your user properties.
      To get the right call for your search engine, open the engine and search for one word. You need the url without the searched word. Write to your properties an display name for this engine and, separated by a comma, the url. See my example in the script header.
      For the list with  search sites, you need display name and site address (without http://).
      It will searched for the full selected text or, if none selection exists, for the word touched by the cursor. You can allow in the properties, that also will recognized words with dots (like objVar.Property).
      The script uses the shell.dll. But if you don't have installed it, the browser will opened with an command line call. Thats why the command window will pop up for a short moment.
      You'll find details for installation and key bindings inside the script. Look for free command numbers in SciTE. By default installation, the numbers must be greater than 35 (max. 49).
      -- TIME_STAMP 2018-09-02 09:22:03 --[[ This script publicates two functions - InetSearch.Engine() You can search for the selected/touched text in SciTE and can select a search engine of your choice. - InetSearch.Site() You can search for the selected/touched text in SciTE with a defined search engine and can select a search site of your choice. Copy this script in your Lua scripts folder. Load this file in the Lua startup: dofile("Full\\Path\\InetSearch.lua") Add in "SciTEUser.properties" the following properties with search engines and search sites of your choice: #~ Inet Search Settings #~ List of engines. "display-name,search-url" (if not set: google.com will used) #~ If only one entry exists, the selection box will not shown. Inet.Search.Engines= \ Google,https://www.google.de/search?q=| \ MetaGer,https://metager.de/meta/meta.ger3?focus=web&eingabe=| \ Bing,https://www.bing.com/search?q=| \ Ask,https://de.ask.com/web?q=| \ Yandex,https://www.yandex.com/search/?text= #~ Engine for site based search #~ Use display name from engines list (if not set: google.com will used) Inet.Search.SearchOnSite.Engine=Google #~ List of sites for site based search. "display-name,site-url" #~ If not set, it searches without a special site. #~ If only one entry exists, the selection box will not shown. Inet.Search.SearchOnSite.Sites= \ AutoIt DE,autoit.de| \ AutoIt EN,autoitscript.com| \ MSDN,msdn.microsoft.com #~ By default, words will detected without dots. (0) #~ You can allow dots, to detect object variables with properties or methods too. Inet.Search.Allow.Punctuation=1 #~ Search commands #~ Search word from cursor with engine selection command.name.9.*=Search with engine selection command.9.*=dostring InetSearch.Engine() command.mode.9.*=subsystem:lua,savebefore:no command.shortcut.9.*=Ctrl+Shift+F8 #~ Search word from cursor with search site selection command.name.5.*=Search with site selection command.5.*=dostring InetSearch.Site() command.mode.5.*=subsystem:lua,savebefore:no command.shortcut.5.*=Ctrl+Shift+F9 --]] InetSearch = {} InetSearch.Handler = EventClass:new(Common) do ------------------------------------------------------------------------------------------------ local engineFallback = "Google,https://www.google.com/search?q=" -- default search engine: "display-name,search-url" local search_type = nil local engine_url = nil local search_item = nil local search_site = nil local tableSelection = nil local list_type = 16 ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------- Load library protected local require_protected = function(_lib) local loaded_lib if pcall(function() loaded_lib = require(_lib) end) then return loaded_lib else return nil end end --> require_protected ------------------------------------------------------------------------------------------------ local shell = require_protected("shell") -- loads the shell library if exists ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Starts the search local RunSearch = function(_item, _url, _site) local sSite = '' if _site ~= nil then sSite = "%20site:".._site end local sCmd = _url.._item..sSite if shell then shell.exec(sCmd) else os.execute('start "" "'..sCmd..'"') end end --> RunSearch ------------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------- Show the user list local ShowSelectionList = function() -- create the selection list (display names from engines or sites) local sep, list = '_', tableSelection[1][1] for i = 2, #tableSelection do list = list..sep..tableSelection[i][1] end local sep_tmp = editor.AutoCSeparator editor.AutoCSeparator = string.byte(sep) editor:UserListShow(list_type, list) editor.AutoCSeparator = sep_tmp end --> ShowSelectionList ------------------------------------------------------------------------------------------------ --------------------------------------------------------------------------- Select the user list function InetSearch.Handler:OnUserListSelection(_tp, _sel) if _tp == list_type then local url for i = 1, #tableSelection do if tableSelection[i][1] == _sel then url = tableSelection[i][2] break end end if search_type == 'site' then search_site = url else search_site = nil engine_url = url end RunSearch(search_item, engine_url, search_site) end end ------------------------------------------------------------------------------------------------ --------------------------------------------------------- List of search engines from properties local GetEngines = function() local sEngines = props['Inet.Search.Engines'] -- without settings, the default search engine will used if sEngines == '' then sEngines = engineFallback end local tEngines = {} for entry in sEngines:gmatch('([^|]+)|-') do for name, url in entry:gmatch('([^,]+),(.+)') do table.insert(tEngines, {name, url}) end end return tEngines end --> GetEngines ------------------------------------------------------------------------------------------------ ----------------------------------------------------------- List of search sites from properties local GetSearchSites = function() local sSites = props['Inet.Search.SearchOnSite.Sites'] if sSites == '' then return nil end local tSites = {} for entry in sSites:gmatch('([^|]+)|-') do for name, url in entry:gmatch('([^,]+),(.+)') do table.insert(tSites, {name, url}) end end return tSites end --> GetSearchSites ------------------------------------------------------------------------------------------------ -------------------------------------------------------------------------------- Get search item local GetSearchItem = function() local sSelect = editor:GetSelText() if sSelect ~= '' then return sSelect end local allowDots = false if props['Inet.Search.Allow.Punctuation'] == '1' then allowDots = true end local caret = editor.CurrentPos local iLine = editor:LineFromPosition(caret) local iZero = editor:PositionFromLine(iLine) editor:LineEnd() local iLineEnd = editor.CurrentPos editor.CurrentPos = caret editor:SetSelection(caret,caret) local iStart = editor:WordStartPosition(caret) if allowDots then while iStart > iZero and editor:textrange(iStart -1, iStart) == '.' do iStart = editor:WordStartPosition(iStart -1) end end local iEnd = editor:WordEndPosition(caret) if allowDots then while iEnd < iLineEnd and editor:textrange(iEnd, iEnd +1) == '.' do iEnd = editor:WordEndPosition(iEnd +1) end end sSelect = editor:textrange(iStart, iEnd):gsub('^([^%w]+)', ''):gsub('([^%w]+)$', '') return sSelect end --> GetSearchItem ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------- Search with engine selection local SearchEngineBased = function() search_type = 'engine' search_item = GetSearchItem() if search_item == '' then return nil end tableSelection = GetEngines() -- only one entry: selection box will not shown if #tableSelection == 1 then RunSearch(search_item, tableSelection[1][2], nil) else ShowSelectionList() end end --> SearchEngineBased ------------------------------------------------------------------------------------------------ -------------------------------------------------------------- Search with search site selection local SearchSiteBased = function() search_type = 'site' search_item = GetSearchItem() if search_item == '' then return nil end -- get the default engine for site based searching for _, url in engineFallback:gmatch('([^,]+),(.+)') do engine_url = url end -- if is set, use search engine from properties local sEngine = props['Inet.Search.SearchOnSite.Engine'] if sEngine ~= '' then local tEngines = GetEngines() for i = 1, #tEngines do if tEngines[i][1] == sEngine then engine_url = tEngines[i][2] break end end end tableSelection = GetSearchSites() -- if none entries for search sites, use simple search if tableSelection == nil then RunSearch(search_item, engine_url, nil) else -- only one entry: selection box will not shown if #tableSelection == 1 then RunSearch(search_item, engine_url, tableSelection[1][2]) else ShowSelectionList() end end end --> SearchSiteBased ------------------------------------------------------------------------------------------------ ---------------------------------------------------------------------------- Publicate functions InetSearch.Engine = SearchEngineBased InetSearch.Site = SearchSiteBased ------------------------------------------------------------------------------------------------ end ----------------------------------------------------------------------------------------------------  
      InetSearch.lua
×