Jump to content
gruntydatsun

Regular Expression To Confirm an IPv4 Address

Recommended Posts

gruntydatsun

Hello,

Is this regular expression suitable for determining if a string is an IPv4 address?

/^(\d+.){3}\d+$/

Possible values     1-255.0-255.0-255.0-255

 

Share this post


Link to post
Share on other sites
guinness

No, it just determines whether a string contains digits.digits.digits.digits. So 456.765.987.999 would be valid though is not a valid IP. Search the Forum for IP validation.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites
jchd

Try this:

Local $aIPs = [ _
    "10.89.185.2", _
    "0.96.0.194", _
    " 100.100 . 250.123", _
    "140.red.tde.net:80", _
    "256.100.526.210", _
    "108.9.10.626", _
    "141-52.8.80", _
    "141.24.249.129", _
    "141.24-249.129", _
    "141..249.130.", _
    "141.24.249.*1", _
    "141.24.33.161", _
    "141.24:.33.161", _
    "141.155.238.1438", _
    "141.24.033.162", _
    "141.24.33.192", _
    "141.16.94.X0" _
]

For $ipv4 In $aIPs
    ConsoleWrite($ipv4 & " -> " & (StringRegExp($ipv4, "^(?:[1-9]|[1-9]\d|1\d\d|2[0-4]\d|25[0-5])(?:\.(?:\d|[1-9]\d|1\d\d|2[0-4]\d|25[0-5])){3}$", 0) ? "" : "in") & "valid" & @LF)
Next
  • Like 1

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites
mLipok

very nice and handy RegExp   @jchd

mLipok


Signature beginning:   Wondering who uses AutoIT and what it can be used for ?
* GHAPI UDF - modest begining - comunication with GitHub REST API Forum Rules *
ADO.au3 UDF     POP3.au3 UDF     XML.au3 UDF    How to use IE.au3  UDF with  AutoIt v3.3.14.x  for other useful stuff click the following button

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST APIErrorLog.au3 UDF - A logging Library
 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF *

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2018-10-31

Share this post


Link to post
Share on other sites
Chimp

also:

Func _isIPaddr($sIPAddr) ; returns true if argument is a plausible IP address
     If Not StringRegExp($sIPAddr, "^((25[0-5]|2[0-4]d|[01]?d?d).){3}(25[0-5]|2[0-4]d|[01]?d?d)$") Then Return SetError(1, 0, False)
     Return True
EndFunc ;==>_isIPaddr
(*) do not use, see post >#6 below :whistle:

Func _isSNmask($sSNmask) ; returns true if argument is a correct 4 digit network mask
    If Not StringRegExp($sSNmask, "^(((255\.){3}(255|254|252|248|240|224|192|128|0+))|((255\.){2}(255|254|252|248|240|224|192|128|0+)\.0)|((255\.)(255|254|252|248|240|224|192|128|0+)(\.0+){2})|((255|254|252|248|240|224|192|128|0+)(\.0+){3}))$") Then Return SetError(1, 0, False)
    Return True
EndFunc   ;==>_isSNmask
Edited by Chimp

small minds discuss people average minds discuss events great minds discuss ideas.... and use AutoIt....

Share this post


Link to post
Share on other sites
jchd

This regexp is commonly found on regexp examples websites but unfortunately it's wrong:

ConsoleWrite("0.1.2.3" & " -> " & (_isIPaddr("0.1.2.3") ? "" : "in") & "valid" & @LF)

This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites
funkey

Different approaches, different results!?

Local $aIPs[18] = [ _
    "10.89.185.2", _
    "0.96.0.194", _
    " 100.100 . 250.123", _
    "140.red.tde.net:80", _
    "256.100.526.210", _
    "108.9.10.626", _
    "141-52.8.80", _
    "141.24.249.129", _
    "141.24-249.129", _
    "141..249.130.", _
    "141.24.249.*1", _
    "141.24.33.161", _
    "141.24:.33.161", _
    "141.155.238.1438", _
    "141.24.033.162", _
    "141.24.33.192", _
    "141.16.94.X0", _
    "0.0.0.0" _
]

Local Const $AF_INET = 2
Local Const $tagIN_ADDR = "ulong S_addr;"

Local $tAddr_In = DllStructCreate($tagIN_ADDR)

ConsoleWrite("_InetPton:" & @LF)
For $ipv4 In $aIPs
    ConsoleWrite($ipv4 & " -> " & _InetPton($ipv4, $tAddr_In) & @LF)
Next

ConsoleWrite(@LF)
ConsoleWrite("StringRegExp:" & @LF)
For $ipv4 In $aIPs
    ConsoleWrite($ipv4 & " -> " & StringRegExp($ipv4, "^(?:[1-9]|[1-9]\d|1\d\d|2[0-4]\d|25[0-5])(?:\.(?:\d|[1-9]\d|1\d\d|2[0-4]\d|25[0-5])){3}$", 0) & @LF)
Next

ConsoleWrite(@LF)
ConsoleWrite("_IsValidIP:" & @LF)
For $ipv4 In $aIPs
    ConsoleWrite($ipv4 & " -> " & _IsValidIP($ipv4) & @LF)
Next

Func _InetPton($sIP, ByRef $tIN_ADDR, $iFamily = $AF_INET) ;IPv4 and IPv6 --> Vista and above
    Local $aRet = DllCall("ws2_32.dll", "int", "InetPtonW", "int", $iFamily, "wstr", $sIP, "struct*", $tIN_ADDR)
    Switch $aRet[0]
        Case -1
            Return SetError(1, 0, $aRet[0]) ; error, check with _WSAGetLastError()
        Case 0
            Return SetError(2, 0, $aRet[0]) ; wrong IP address
    EndSwitch
    Return $aRet[0]
EndFunc   ;==>_InetPton

Func _IsValidIP($sIP)
    Local $aIP = StringSplit($sIP, ".")
    If $aIP[0] <> 4 Then Return SetError(1, 0, 0)
    For $x = 1 To $aIP[0]
        If $aIP[$x] < 0 Or $aIP[$x] > 255 Then Return SetError(2, $x, 0)
    Next
    Return 1
EndFunc   ;==>_IsValidIP

Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the Universe
trying to produce bigger and better idiots.
So far, the Universe is winning.

Share this post


Link to post
Share on other sites
spudw2k

@funkey

Regarding _IsValidIP, there are definately false positives (particularly when non number chars are used). I believe when you do an If statement with a "string" and don't do a literal compare (==) it will return 0.

I'm not sure why _InetPton accepts 0.96.0.194 and 0.0.0.0 as valid IP either, as they are typically not considered valid IPs (certainly not routable addresses anyway).
 

Share this post


Link to post
Share on other sites
BrewManNH

Neither of those 2 functions are valid for IP addresses, they both return false positives. This one on the other hand doesn't have that problem, it returns the correct result.

You will need to change the comparison function though, because it doesn't return a simple 1 or 0 if not valid.

ConsoleWrite(@LF)
ConsoleWrite("_ValidIP:" & @LF)
For $ipv4 In $aIPs
    $bValid = (_ValidIP($ipv4) = -1) ? 0 : 1
    ConsoleWrite($ipv4 & " -> " & $bValid & @LF)
Next

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
jchd

It depends what you consider IP address. Local addresses don't have the limitations you mention.


This wonderful site allows debugging and testing regular expressions (many flavors available). An absolute must have in your bookmarks.
Another excellent RegExp tutorial. Don't forget downloading your copy of up-to-date pcretest.exe and pcregrep.exe here
RegExp tutorial: enough to get started
PCRE v8.33 regexp documentation latest available release and currently implemented in AutoIt beta.

SQLitespeed is another feature-rich premier SQLite manager (includes import/export). Well worth a try.
SQLite Expert (freeware Personal Edition or payware Pro version) is a very useful SQLite database manager.
An excellent eBook covering almost every aspect of SQLite3: a must-read for anyone doing serious work.
SQL tutorial (covers "generic" SQL, but most of it applies to SQLite as well)
A work-in-progress SQLite3 tutorial. Don't miss other LxyzTHW pages!
SQLite official website with full documentation (may be newer than the SQLite library that comes standard with AutoIt)

Share this post


Link to post
Share on other sites
BrewManNH

Anything that falls outside of a Class A/B/C address block I'd consider invalid, anything that falls inside a 10.xx.xx.xx/172.xx.xx.xx/192.xx.xx.xx I'd consider to be a private address, anything that starts with 0, 127 or 169 are invalid IP addresses. Anything that starts higher than 223 is a reserved address but can have special uses. Other than that, what you use on your own network is up to you.

RegEx is particularly problematic for finding valid IP address ranges, I've seen hundreds and they all fail simple tests.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites
computergroove

#include <Array.au3>
#include <File.au3>
#include <MsgBoxConstants.au3>

Local $aArray[5]
Local $ipAddr = "127.0.0.1"
$aArray = StringSplit($ipAddr, ".")
;_ArrayDisplay($aArray)

For $i = 1 to $aArray[0]
    If $aArray[$i] > 255 Then
        MsgBox(0,"Results","This is not a valid IP Address")
        Exit
    EndIf
Next

MsgBox(0,"Results","Test Passed")

How about this?


Get Scite to add a popup when you use a 3rd party UDF -> http://www.autoitscript.com/autoit3/scite/docs/SciTE4AutoIt3/user-calltip-manager.html

Share this post


Link to post
Share on other sites
guinness

computergroove,

I am a little old fashioned, but I would be careful when comparing strings as integers. AutoIt is forgiving, but sometimes it can bite you when you least expect it. Also BrewManNH's version adopts the same approach albeit a little better and wrapped up in a usable function.


UDF List:

 
_AdapterConnections()_AlwaysRun()_AppMon()_AppMonEx()_ArrayFilter/_ArrayReduce_BinaryBin()_CheckMsgBox()_CmdLineRaw()_ContextMenu()_ConvertLHWebColor()/_ConvertSHWebColor()_DesktopDimensions()_DisplayPassword()_DotNet_Load()/_DotNet_Unload()_Fibonacci()_FileCompare()_FileCompareContents()_FileNameByHandle()_FilePrefix/SRE()_FindInFile()_GetBackgroundColor()/_SetBackgroundColor()_GetConrolID()_GetCtrlClass()_GetDirectoryFormat()_GetDriveMediaType()_GetFilename()/_GetFilenameExt()_GetHardwareID()_GetIP()_GetIP_Country()_GetOSLanguage()_GetSavedSource()_GetStringSize()_GetSystemPaths()_GetURLImage()_GIFImage()_GoogleWeather()_GUICtrlCreateGroup()_GUICtrlListBox_CreateArray()_GUICtrlListView_CreateArray()_GUICtrlListView_SaveCSV()_GUICtrlListView_SaveHTML()_GUICtrlListView_SaveTxt()_GUICtrlListView_SaveXML()_GUICtrlMenu_Recent()_GUICtrlMenu_SetItemImage()_GUICtrlTreeView_CreateArray()_GUIDisable()_GUIImageList_SetIconFromHandle()_GUIRegisterMsg()_GUISetIcon()_Icon_Clear()/_Icon_Set()_IdleTime()_InetGet()_InetGetGUI()_InetGetProgress()_IPDetails()_IsFileOlder()_IsGUID()_IsHex()_IsPalindrome()_IsRegKey()_IsStringRegExp()_IsSystemDrive()_IsUPX()_IsValidType()_IsWebColor()_Language()_Log()_MicrosoftInternetConnectivity()_MSDNDataType()_PathFull/GetRelative/Split()_PathSplitEx()_PrintFromArray()_ProgressSetMarquee()_ReDim()_RockPaperScissors()/_RockPaperScissorsLizardSpock()_ScrollingCredits_SelfDelete()_SelfRename()_SelfUpdate()_SendTo()_ShellAll()_ShellFile()_ShellFolder()_SingletonHWID()_SingletonPID()_Startup()_StringCompact()_StringIsValid()_StringRegExpMetaCharacters()_StringReplaceWholeWord()_StringStripChars()_Temperature()_TrialPeriod()_UKToUSDate()/_USToUKDate()_WinAPI_Create_CTL_CODE()_WinAPI_CreateGUID()_WMIDateStringToDate()/_DateToWMIDateString()Au3 script parsingAutoIt SearchAutoIt3 PortableAutoIt3WrapperToPragmaAutoItWinGetTitle()/AutoItWinSetTitle()CodingDirToHTML5FileInstallrFileReadLastChars()GeoIP databaseGUI - Only Close ButtonGUI ExamplesGUICtrlDeleteImage()GUICtrlGetBkColor()GUICtrlGetStyle()GUIEventsGUIGetBkColor()Int_Parse() & Int_TryParse()IsISBN()LockFile()Mapping CtrlIDsOOP in AutoItParseHeadersToSciTE()PasswordValidPasteBinPosts Per DayPreExpandProtect GlobalsQueue()Resource UpdateResourcesExSciTE JumpSettings INISHELLHOOKShunting-YardSignature CreatorStack()Stopwatch()StringAddLF()/StringStripLF()StringEOLToCRLF()VSCROLLWM_COPYDATAMore Examples...

Updated: 22/04/2018

Share this post


Link to post
Share on other sites
ball58

Try this one out. Works well for me...

$isIP = StringRegExp($string,'^(([0-1]?[0-9]?[1-9])|([0-1]?[1-9][0-9]?)|(1[0-9]?[0-9]?)|(2[0-4][0-9])|(25[0-4]))((.(([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-4]))){3})$')

Share this post


Link to post
Share on other sites
BrewManNH

Try this one out. Works well for me...

$isIP = StringRegExp($string,'^(([0-1]?[0-9]?[1-9])|([0-1]?[1-9][0-9]?)|(1[0-9]?[0-9]?)|(2[0-4][0-9])|(25[0-4]))((.(([0-1]?[0-9]?[0-9])|(2[0-4][0-9])|(25[0-4]))){3})$')

That one works well, but still shows 127.xx.xx.xx/169.xx.xx.xx addresses as valid, neither of which is. It also marks as valid an IP address that ends in 0, which shouldn't be used in most cases.


If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×